Headphones Sennheiser / Volume (help?)

Similar Questions

• Windows 7 problem - headphones Sennheiser PC 35 USB not recognized

  Problem:

  I recently acquired a Windows 7 PC and tried to plug headphones Sennheiser PC 35 USB inside.

  Trying to solve the problem:

  * Connect all USB ports, result - the device remains unknown.
  * Use the fix for the problem stated in the site of the manufacturer, result - the device remains unknown.
  * Trying to set as default in the menu sound Manager, result - the device remains unknown.

  With this information availible, any thoughts on how to solve this problem?

  The PC35 includes an integrated sound card.

  Find her piece there and you should be able to find a driver.

• Laptop HP Pavilion with Windows 8 - speakers stopped working but headphones do! Help, please!

  Please someone help - the speakers on my laptop have stopped working all of a sudden! But the headphones that there is a low hum when I use them.

  Once in the control plan to address the problem, he told me that they work.

  Please help - laptop is only a few months old!

  You'll be my hero.

  Hello

  Open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select Properties.  Click the driver tab and then click on "update driver".  Select "Browse my computer for driver software", then "Let Me pick from a list of drivers for devices on my computer.  "High definition Audio Device" left click once to highlight, then click the next button to install it.

  This makes all the difference?

  Kind regards

  DP - K

• {A} N5110 INSPIRON internal speakers/headphones crackle. Help, please.

  I bought my DELL laptop just a week ago and I noticed that whenever I play music or any audio speakers sounded funny and crunches. I tried to put on the helmet, but always the same. I think it has to do with the sound card, because I tried all troubleshooting and audio settings but the problem still exists. I even tried a couple of headphones but there is no change, it still crackles. It's really annoying and at the same time frustrating.

  I have all the guarantee and received in loans, but before going to the dealer, can I do to save money to get a taxi so that it sets? Please, I need help. =(

  Jinxed.Utopia

  OK, I tried to install "Intel (R) Rapid Storage Technology" as advised in the forum, but I can still hear the sound of Choppy/jump.

  Also try disabling Net guard if you have McAfee...

  (1) open McAfee Security Center
  2) click on "Web and Email Protection.
  3) click on 'firewall '.
  4) click on "Net guard".
  (5) uncheck the box next to 'turn on Net Guard

  Disable power management systems. There may be several diagrams on a laptop, that is for the operating system, for the graphics card, audio, etc... I don't know where they are on your model.

  Check if there is one for IDT audio. Go to start > Control Panel > IDT Audio Control Panel > advanced power setting, etc.

  On some models, you can disable 'Enable Dell Extended battery dead' in the battery meter window.

  You may or may not be those that I mentioned, and there are probably others that I don't know.

  In addition, go to the properties of sound and under the control of tab "Improvements" "disable all sound effects.

• I deleted my hp pavilion dv6 headphones. can you help me to restore the capacity?

  Recently, my speakers went out on my HP Pavilion dv6 of Beats edition laptop.  I used my headphones since, and in a last attempt to restore my speakers (an attempt tragic dyi) I accidentally deleted my headset to my laptop capabilities.  Can you please tell me how to get the functionality I've lost.  I run on Windows 7 on my computer. Need help please, I rely on this computer to watch TV and movies while I'm in College.  And if there is a way to fix my computer speakers, that would be great as well.

  Thank you

  deis2016

  Well, you must make sure that the speakers are set as the default audio device. Try the following.

  1. Click Start, type 'Sound' and press ENTER. This will open the sound preferences window.
  2. Click on the speakers and the "set as default" button down.
  3. After you click OK, restart your computer.
  4. Display the result.

• Unable to connect to headphones Sennheiser MM 100 bluetooth on x 230

  I have a x 230 laptop with bluetooth. I activated the bluetooth radio and tried to add my bluetooth headset. Whenever I add a bluetooth device, my helmet is not discovered. My bluetooth on my laptop found other bluetooth devices, so I know it works. I connected my bluetooth for my iphone Bluetooth headset and it works. So I think there is a problem of compatibility between the two. My friend has tried using its windows phone to discover that the helmet and that also didn't work.

  
  

• Headphone and speaker volume problem. Volume is not stored.

  I have the Helix i5 and the problem I have is that when I plug in my headphones, the volume does not automatically adjust. If my speakers are at full volume, so are my helmet when I plug them in. Please help me solve this problem. My Microsoft Surface never had a ridiculous topic like this.

  Try.

  Panel--> HW & Sound--> Realtek HD Audio Manager

  On the top right side, press "Device avancΘs".

  Choose mode multistreaming

  For me this unlocked separate volume sliders to the speakers and headphones

• Error message receiver: headphones may not be installed correctly and Sennheiser U 320 USB headset no longer works.

  Original title: USB headset not recognized by windows 8

  I have headphones Sennheiser U 320 USB that I got about 6 months before, it worked fine up until this point. The sound no longer plays through the headphones, he just playing through the speakers. I reinstalled my audio drivers and I tried to put the default audio headset in playback devices but the headphones don't even appear. When I right click on the space empty and check see the disconnected devices that they don't even appear. I don't know what to do at this point. At the time where they worked I got a few messages in the status bar system that says my helmet might not be installed correctly, I tried to fix it but didn't know what to do so I swept, then they just stopped working all together.

  There seems to be something weird with the usb it comes spontaneously started working and then when I unplugged and plugged again it does not work.

  Hello

  For a better understanding of the issue, I would need more information on your side.

  1. are you able to connect and use other USB devices on the computer without any problem?

  2. don't the problem occurs when you connect the headphones on another computer in Windows 8?
  3. What is the brand and model of the computer?

  I suggest to uninstall and reinstall the Device Manager USB controllers and check to see if it helps.

  (a) press on the Windows key + R, type devmgmt.msc.

  (b) expand USB controllers, click drivers.

  (c) click on Properties, click on the Uninstall tab.

  (d) click OK.

  (e) restart the computer and it will update automatically pilots.

  Note: You can also install the latest Chipset driver on the computer manufacturer site.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• iPhone 6 variations of volume when using headphones

  I set the volume on my phone less than half for the ringtone, but when I use a headset (bluetooth or wired) I increase the volume to listen to my music, and when I disconnect the headphones, the volume remains at the top level.

  I thought that the iPhone would detect this change and restore the volume accordingly, in the same way that I can adjust the volume for each device speaker/headphone on my iMac.

  Is it me being a bit max, or I missed something?

  Thank you.

  On your iPhone, go to:

  Settings > sounds

  In the Middle, there is a section "RINGER AND ALERTS.  You can adjust the ring volume and disable the option "change with the buttons".  This should keep your ringtones at the level of the whole but allow you to adjust the level of the music with the buttons on the side.

• two profiles/levels of audio volume for headphones vs built-in speakers like Macbookpro

  Hi all

  As in my macbook pro, can I make the computer don't forget the volume for headphones and speakers integrated levels?

  Headphones: 10 volume, volume integrated speakers 25 etc. If I remove the headphones, the volume is expected to increase to 25 and when I put headphones, it should decrease by 10 new... ! is not necessarily 10 and 25, it's just to get an idea... !

  Nevermind, it works like that already, cannot remove this question well.. !

• volume

  I have my volume up to the largest, but it is always difficult to hear something even with headphones!  Someone help me?

  Thank you

  {Information}

  Hello

  It may be worth trying the following to see if that helps the issue at all.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if that helped.

  Kind regards

  DP - K

  

  

• Satellite L50 - B - sound does not work unless I plugged headphones

  Hello

  I'm having trouble with the sound on my satellite L50-B-1NM, I have nothing on the speakers, but it works fine if I plug in headphones, can anyone help? I tried following the advice of ladies of support and tried to uninstall, but it does not :-(all help would be much appreciated

  Laura

  Hello

  Go to control panel of-> sound-> the Read tab

  Here, you set speakers as the default device.

  Your comments would be appreciated

• His problem with laptop speakers and headphones

  Yes, the night last and Eve, my speakers worked very well. In the long run a moment a Skype call, I had to switch to headphones because volume speakers is weak for a reason any. Don't ask me how or why. in any case, I have it plugged headphones can hear the sound of typing the volume bar in the Volume control and can listen to music through THAT my helmet. I've heard if your not careful, you can jam the switch between laptop speakers and headphones, so I tried pulling the plug in and out a few times, not good... I have a Dell Inspiron 9400 Intel under Windows XP SP3.

  Also, I made sure all the boxes in my properties of Volume control are enabled and are uncut.
  EDIT: So, figures that my Sigma Tel Audio necessary or needed a new driver, I went to Dell.com and downloaded the last being, installed, rebooted and then suddenly I hear these little tones, sounds is fixed again. So, I don't know if this issue must meet more.

  Hello

  Thanks for sharing your resolution.

  In the future, if you come across any question relating to Windows please visit Microsoft Answers forum.

• Notebook Compaq CQ50 - 107NR PC-not to sound of the laptop without headphones

  No sound from the laptop without headphones... help?

  Until today, I was perfectly able to hear the sound in my Compaq CQ50-107NR notebook PC with or without headphones plugged. I have not upgraded or anything and I don't know how to fix it. It shows everything works well, but is not. Any help would be greatly appreciated.

  Hi rajiv puri,.
   
  Because that did not fix the issue, I suggest delete and then install the sound card and check.
   
  Here is a link to
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-or-remove-a-sound-card
  It may also be that the sound card may be disabled in the BIOS, probably only the edge can work.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.] [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Headphone stopped working on envy 17

  computer laptop envy 17 3090er A9P77UA #ABA

  Win 7 64 bit - default, no changes to the system after I bought

  Leaning just play a sound in the headphones without no reason. Headphones (sennheiser cx300) work fine with my phone. When I'm inside the laptop pluggin - he recognize them - is changing the audio settings and playback devices show helmet of communication with a green icon - but not sound.

  I have tried reinstalling drivers - does not work.

  This problem has already appeared once when I bought this laptop - about 4 months ago but then it dissapped unexpectedly and worked well.

  Also searced this forum - seen people have similar unsolved problems with desire - for one the problem disappear also the 'magical '.

  Any suggestions?

  Hello

  Try the following.

  First of all, disconnect all external devices.

  Then download IDT Audio Setup on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop and unplug the power adapter.  Keep the beats and the button / stop for 10 seconds.  Plug the power adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set as default.

  Check if your headset is working.

  Kind regards

  DP - K