[Helix] HUB USB 3.0 Update tool

Similar Questions

• USB-9171 installs as USB Flash Firmware Updater

  I just got a USB-9171 with 9401 module.  Try to install it on a laptop Dell Vostro 64 bit WIndows 7. LabVIEW 8.5.1, which works very well with a USB-6212 for awhile is already installed.  I installed the 9.6 NOR-DAQmx that came with the new 9171 and the time of execution of Labview 2012 such as recommended by the Update Manager.  The connection of the USB-6212 he loaded the driver, he recognized in MAX and will work as before.  But plug it in the USB-9171, identifies the driver loaded by Windows as USB Flash Firmware Updater.  The 9171 does not appear in MAX.

  How can I get the USB-9171 driver appropriate to load?

  Thanks - Steve

  Found a solution by calling the service tech.

  Unplug the USB device.

  With the help of MAX, go to tools > reset Configuration data.  This will erase the MAX configuration and restart.

  MAX aperture.  Open the Windows Device Manager.

  Plug the device.

  In the beginning, I received the ball from Windows saying that it successfully installed USB Flash Firmware Updater.  But then on hold while the window updated Device Manager (it flashed several times), he said the right device (cDAQ-9171) as well as the module I connected on the cDAQ-9171, which is a 9401.

  The tech service rep explained that there is a service called Windows device charger OR who must load the appropriate driver, but sometimes the service may stop too soon.

  In any case, I tried all the things here before, but what was different this time was seen both MAX and the windows Device Manager open at the same time before connecting the unit (after wiping of the configuration).

• HP laptop laptop 15-ay019tu: shortcuts keyboard and HUB USB 3.0 driver is missing, I can not find anywhere then please provide some suggest

  I tried to install drivers in my new pc and I almost did. But I can not find the driver HUB USB 3.0 (that is listed as "unknown device").

  Another problem in the function keys. They do not work. So I need to install the driver of access keys

  I have tried many on the internet until now, I can't able to find drivers for my computer so please suggest a useful site to download the two drivers.

  Hello:

  For the question USB 3, download, unzip and run the file setup.exe from the link below.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

  See if installing this software gets the Fn keys to work.

  This package contains the HP System Event Utility, which allows the special function keys on the laptop to program models. For example, HP System Event Utility allows users to press the Fn + ESC keys to view system information. This package is provided for the supported models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp76001-76500/sp76383.exe

• It's 2016, but find a hub USB 3 seems difficult.

  It's 2016, but find a hub USB 3 seems difficult.

  Guess I'm of an age where I need grandchildren to send a few years so that they can longer hold the technology of their grandfolks...

  Have spent time not a little online shopping for a usb hub powered to an iMac that reviewers find reliable and - this is the problem that I don't have the knowledge to understand - will support an auxiliary hard drive without cutting into the speed of the drive. I am a bit taken aback that people report problems of reliability and compatibility here in 2016, and even less accurate recreation the USB socket at the back of the iMac via a hub powered and wired to a few inches apart.

  Recommend a product?

  Very grateful.

  I have a powered hub Plugable (bought on Amazon). It's USB2 but I remember it being a USB3 version with reasonable comments.

  I think that people are more likely to write a comment if they have a problem so exams can be negatively biased a little.  I read the reviews, but I also analyze them.  A bit of any product may encounter problems for one thing, I'm looking for, that's how the company manages these products.

  Another thing to keep in mind is how the hub is intended to be used. If someone posts a bad review because they tried to load 8 iPads to a hub powered at the same time, well I think you'll be lucky to find a hub that can do.  Hubs can have many ports, but the power supply is usually limited and not designed to provide full amperage to all ports at the same time.

• Qosmio F10: What to do with the update tool CD after the replacement of the motherboard?

  Hi, hoping someone can help.

  My F10 had three new mother advice, since one broke down. Fortunately, I had paid for the extended warranty. However, when she came back this time they had formatted my drive was hard because they changed the chip set. Now he can't find a TV signal and the FN keys do not work. They sent me new CD-ROM entitled "Update Tool" and "Qosmio Player Update", but they do nothing to help the problem. Anyone has any ideas or will he be back again?

  Thanks in advance
  Chris

  It of very strange that you didn't receive the Instructions for use.
  Have you checked if there is any description how to upgrade the utilities?

  I think that if you have not received any operating instructions how to use the update of the Tools CD, you should ask the guy to service for such documents.

  In my opinion, the update of the tools is necessary because the new material and new chipset was installed and in this case the old drivers or utilities would not work.

• Hub USB no longer works on IMAC

  This has happened twice now. I bought a powered USB hub gear and it worked for a few weeks then stopped working. I bought a different model, a new, and he also worked for a few weeks and then stopped. I tried to reset the SMC, and I think I have done correctly, but that no longer works. I tried to plug the buh on another computer and it worked fine- but not on the Mac. What is happening here. Any suggestions?

  The first thing to try is to do a reset SMC 2 - 3 times back to back with all the perihpherals disconnected. If this does not work then it may be one of the devices connected to the hub. You should try to see if it's a device by trial and error.

  If all else fails I would swap your gear for one of the hubs USB Belkins. I've never had a problem with one of my friends.

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?

• need technical support for windows live update tool

  need technical support for windows live update tool

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/8f70d5a5-31a6-47fd-9eac-cded835d147f ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error Code937001 with the receiving system update tool

  I have a laptop two months old that is preinstalled with Windows 7.  There is a windows update that keeps do not install the code 937001 error updating 'tools of preparation of the system for Windows 7 64 x based systems (KB947821) April 2010 updates.'

  Whenever I have shut down the computer, the stop button also has a yellow shield next to her, and then when it stops, it moved something.  The update keeps poping up upward to install.

  Any help is appreciated to grreatly.  Thanks Greg

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 reset Windows Update by...

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; KB971058 access via I8 32 bit (only); Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
  http://support.Microsoft.com/kb/971058

  5 restart once again & test.

  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Unable to enter some charatcers, i.e. a, e, i, o, u, s but can eneter other i.e. h, w, q, etc. When you use the Windows product key update tool

  I am changing the product windows on a machine key recently image. To do this I use the Windows product key update tool. Usually, when I use the tool all right and there is no problem; However, in this case it I cannot enter certain keys as in a, e, i, o, u, s, etc.. I tried copy and pasting from Notepad and it sticks only certain letters like h and q.

  Someone at - it suggestions/ideas on how to solve this problem without having to re - install Windows?

  Sorry, we had used the wrong key for the version of the o/s.

• How to fix - error 80073712 - windows component store is corrupt - after correctly installing the system update tool for windows vista.

  I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.

  I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.

  How can I fix the corrupted windows components store?

  Thank you

  Dan

  CMDC,
  If the SFC was not able to repair files then the best thing to do is to reinstall Windows.  You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool.  If there is still a problem with the SFC nto be able to complete then you should do a reinstall.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The system update tool

  Use of the system after installation update tool?  It does not appear to have solved the problem with security download errors... very frustrating and tedious grrrrr!

  Hello Vespamama,

  Thanks for posting your question on the Microsoft answers Forum.

  After you download the system update tool, it runs a unique analysis of inconsistencies that might prevent future maintenance operations. This tool is only offered by Windows Update only if you have a problem that the tool identifies that it can fix.

  What kind of error you see which should be fixed with the system update readiness tool? Maybe there's another fix to your question.

  Following error codes are those who can fix the system preparation tool:

  0 x 80070002

  0x8007000D

  0x800F081F

  0 x 80073712

  0x800736CC

  0x800705B9

  0 x 80070246

  0x8007370D

  0x800737A

  0 x 80070057

  0x800b0100

  0 x 80092003

  0x800b0101

  0x8007371B

  Please reply back to give more details about the problem you are having. We look forward to helping you solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The system update tool is to continue the search for updates on my Windows 7 sp1

  Windows Update is continue verification of updates & system update tool is to continue looking for updates on my Windows 7. Help, please!

  Value 'Never find updates' automatic updates and reboot.

  Best regards, VZ

• Error 800705AA during the upgrade to Windows 10 via Windows Update tool

  I have my old HP laptop with preinstalled WIndows 7 32 bit. Some time ago, I decided to install Linux alongside Windows, so I deleted the partition that allows you to reinstall the operating system (don't ask my why I deleted it instead of parition HP tools).
  Now, I decided to upgrade my Windows 7 to Windows 10 but I had a lot of errors during execution of Windows Update. I installed these updates manually and I have no future updates except optionally upgrade Windows 10. Unfortunately when I try to upgrade the system via Windows Update tool, I get an error: 800705AA.
  I tried to run the Windows Update Troubleshooter, but he found nothing. I also downloaded the iso file of Windows 10 and tried to run but I get message informing me that the Windows product key cannot be verified (it's a message in my language mother tongue is not an exact translation). As I said I don't have Windows 7 disk or partition that allows me to perform the repair facility.
  Any ideas what I can do to upgrade my system?

  I suggest that you perform a clean installation.

  Step 1: How to download official Windows 10 ISO files

  Step 2: how: perform a clean installation of Windows 10

  Step 3:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

• I have some problems when connecting my hub USB for Windows 7.

  Original title: Windows 7 & PnP...

  I have some problems when connecting my USB hub (this is PnP)...  I don't know Don t what the issue with windows 7 and PnP´s, but I ´ve read some info about it on the net saying that peripheral soe Pnp will not work on windows 7... So, what can I do?

  Hello

  1. What is the brand and model of the computer/hub USB?

  2. what happens when you plug the USB hub to the computer?

  3 - is it is not detected?

  4. other USB devices work?

  Response with more information to help you further.

  The hardware which are not compatible with Windows 7 will not work with it. However, almost of hardware and software are compatible with Windows 7.

  Step 1:

  See if the USB hub is compatible with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Step 2: Run the following fix - it:

  Hardware devices do not work or are not detected in Windows:

  http://support.Microsoft.com/mats/hardware_device_problems/en-us