Hello everyone. I have a DVR installed at home and I want to connect to work to see the camera.

Similar Questions

• I have a macbook pro mid 2012 and I want to connect two monitors

  I have a macbook mid 2012 pro and I want to connect two monitors.

  as you know, I have a firewire port, port a thunderbolt and two usb ports.

  You can connect in series two screens Thunderbolt to your MacBook Pro.

• I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  the laptop contained Home Basic windows 7 (64-bit) and I want to install windows vista Home premium (32 bit) on a bootable partition that it will be possible to do or tell me the parallel method to move a certain 32-bit operating system...

  I do not understand your question. If the laptop can run Windows Vista, it can probably run Windows 7 too.

  To run Windows 7 64-bit, the processor must be a minimum Core 2 Duo.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

• Hello, now I have an individual membership Adobe Creative Cloud. I would change to a membership of the teams. Also now there are Danish - products/apps I want on version switches to English. If anyone can help. Thank you :-)

  Hello, now I have an individual membership Adobe Creative Cloud. I would change to a membership of the teams.

  Now, the products/apps are Danish - I want that all the products/apps to be English versions. If anyone can help. Thank you :-)

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• How do I (or can I) install Photoshop on a 2nd device? I already have it on a Windows laptop and now want to download on a Mac. Should I re-register?

  I already have it on a Windows laptop and now want to download on a Mac. Should I re-register?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Good evening, I have try to install IA (cc) and said that the absence of an error (49) and won't let me install it.  I have an Acer Aspire S7, 4ram, i5, 128hdd.  I wonder if someone puedde axplicar me as I do to complete the installation. kisses.

  Good evening, I have try to install IA (cc) and said that the absence of an error (49) and won't let me install it.
  
  I have an Acer Aspire S7, 4ram, i5, 128hdd.
  
  I wonder if someone puedde axplicar me as I do to complete the installation.
  kisses.

  Please see the links below.

  • Error download or update Adobe Creative Cloud applications
  • CC of Photoshop update failed. Download error 49

  Hope this will help you.

  Kind regards

  Hervé Khare

• I have LR 6.1.1 CS and it keeps crashing, also tried to turn off the graphics card. Everyone knows the same and they have a solution.

  Photoshop Lightroom  I have LR 6.1.1 CS and it keeps crashing, also tried to turn off the graphics card. Everyone knows the same and they have a solution.

  Hi ashvinkumarb40658145,

  When exactly LR 6 crash and you use a Wacom?

  Concerning

  Rohit.

• Hello! I have an Adobe Creative Cloud membership and was under the impression that I was allowed to host 5 free sites through Business Catalyst. However, when I launch my site built in Adobe Muse CC by Business Catalyst he orders to buy a h

  Hello! I have an Adobe Creative Cloud membership and was under the impression that I was allowed to host 5 free sites through Business Catalyst. However, when I launch my site built in Adobe Muse CC by Business Catalyst he ordered to buy a hosting package. Can you please explain what is happening here, and how can I use my free hosting?

  5 free sites ended. It is not available from the CC and more.

• I have lr 5 installed on my mac, I want to buy photographer cc (lr and ps) monthly subscription. How this will affect the already installed lr version... it will update my current version. I'm worried about all the files and it works

  I have lr 5 installed on my mac, I want to buy photographer cc (lr and ps) monthly subscription. How this will affect the already installed lr version... it will update my current version. I'm worried about all the files and work that I already have in my current version of lr 5? Thank you

  You can make reference to: Lightroom and Creative Cloud FAQ   using Adobe Photoshop Lightroom | Lightroom / Common Questions

  Concerning

  Baudier

• I have a dell computer, it has axtra D drive for drive & utilities I have mistakanly loaded two times I remove and reinstall please help / ps its low memory, see the

  I have a dell computer, it has axtra D drive for drive & utilities I have mistakanly loaded two times I remove and reinstall please help / ps its low memory, see the

  Hello

  
  (1) what exactly are you trying to delete?
  (2) what exactly you are trying to re - install?
  (3) exactly where do you get this memory low message?
   
  The reader might be for backup and could have copied data on the same, thanks to which it shows a low space.
  
  You can contact Dell technical support for assistance by following this link:
  http://support.Dell.com/
  Hope this information is useful.

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• I have my ID Windows Live ID have not used for quite awhile and I would like to start using it again, the live ID is always committed, however I don't remember the password

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  original title: can reactivate you my windows Live ID?

  Hello, I have my ID Windows Live ID have not used for some time and I want to start using it again, live ID is always committed but I don't remember the password and I can't use the reset password option because I don't know that it is marked and "inactive".  Please let me know promptly if you are able to reactivate my live ID.  Once you answer this, I will use the live id address.  Thank you in advance.

  It is a peer-to-peer (user forum.  You don't talk to Microsoft directly.  The answerto your question is, "No."

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

• I just got a new supplier of cable installed at home and now we find that our usual printer print wireless. How can I add this to the new network?

  I just had a new supplier of cable installed at home and now we recognize that our habit of printing wireless printer, how can I add this to the new network?

  Hello

  • What is the brand and model of the printer?
  • What happens when you try to print?
  • You receive an error message?

  You can view these methods:

  Method 1:

  Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  1. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click onWindows Firewall.

  2. in the left pane, click turn Windows Firewall on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. below for each type of network location, click on disable Windows Firewall, and then clickOK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

• Im trying to stall the game counter strike1.6 and the Don t of steam I have load Don t know why and on my friends PC it works only on my dosen´t can you help me guys

  Im trying to stall the game counter strike1.6 and the Don t of steam I have load Don t know why and on my friends PC it works only on my dosen´t can you help me guys

  Hi rogerusa,

  1. you are running Windows 7 on the computer?

  The description of your problem, we understand that you try to install the game and it does not load.

  Check if you can install the game in clean boot or by turning off all non-Microsoft programs. To do this, follow these steps.
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. right-click on the file to install game and click Run as administrator. Install the game and check the result.
  d. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card?

  How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card? (I am running windows xp professional).

  PS - I'm a senior and not warned, any computer do pls 'non technical' answers as possible.

  Thanks in advance for the answers to my question!

  Hello Fred!

  • First create a new folder by right click on an open space on your desktop
  • hover the mouse over the new, & click on new folder
  • right-click on the new folder and choose Rename
  • write your selected folder name
    
  1. Connect your data cable USB & POWER to the camera or insert the memory card
  2. Open the files and Select the files you want to save
  3. Select files butten now the mouse left click and move the mouse over the files
  4. then right click on the selected files and click copy
  5. go to the folder you named and open
  6. right-click and select Paste & that's it!

  I hope this works!
  Do not hesitate to ask, I don't mind!