Hello help, Mac can't find the printer
Hi all
'BonjourPSsetup.exe not supported under OS X' I am puzzled.
To create a roaming network, I added as an express to my Time Capsule airport and doing so changed the name of the network. (Original name was a little too identifiable) now MacBook WiFi can not find the printer, it allows. (cause he's probably looking for the former name of network). Went to Apple's support for assistance. Found several posts with instructions. All direct me to download the Printer Wizard Hello. When I do, I get the above error.
Also, went to:
Applications - printers and Scanners - add
List of shows:
Name: Series HP Photosmart C4385
Type: USB
Cannot change the type of USB to Hello
SYSTEM-
El Capitan 10.11.6
MacBookPro, MacMini, iPad.
Express connected to the Airport via CAT 6.
MacMini use USB for printer
HP Photosmart C4385
Thanks in advance,
Mike
Resolved to my situation. Find the HP original installation disk. Uninstalled and reloaded. Fact
Tags: Windows Software
Similar Questions
-
I can't find the printer driver for my printer to savin C9020 wsd
I can't find the printer driver for my printer to savin C9020 wsd, anyone know where I can get it?
Hello
What operating system do you use?
I suggest you to check if it is compatible with the operating system you are using.
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
I suggest to the manufacture of the printer and check.
http://www.Savin.com/downloads/default.aspx?HBN=drivers
See also:
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
In fact, I need help but can't find the answer.
Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as empty as when I open Firefox, it automatically load my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
Thank you.[Personal information deleted by the moderator. Please read the guidelines and rules of the Forum, thank you.]
Hello, please refer to customize the page new tab to turn off the function.
-
My mac can't find the installer for creative cloud?
When I click on install creative cloud, there comes a message that my mac can't find the installer
Please refer to:
Troubleshoot the CCM Applet installation and download
In addition, you can refer me
- Impossible to reach on the Adobe servers, please check the firewall settings and try again
- In creative Application of cloud "impossible to reach adobe servers, please check your firewall settings.
- Impossible to reach on the Adobe servers when opening creative Cloud
They have great information.
Concerning
Baudier
-
Hello guys,.
I have a problem with my iPhone 6s that u can not find the icon airplay on it, and my device is up to date.
and I want to connect it with my macbook pro.
Whats Airplay icon?
-
Install HP can't find the printer on the airport
I recently bought a HP Photosmart C410a and it printing, fax and copy all work fine without installing any software on any of my macs. I run OS x 10.6. However, when you try to scan from the printer, it is said to start the scan of the computer. So I tried to install the software (downloaded from the HP Web site) and the HP installer can't find my printer. The printer is connected via USB to the airport and as I said printing and everything works fine.
How can I install HP to recognize my printer? Or, if not, is there a program already on my mac which will accept the scans?
Thank you.
Oh, USB ports on airports (or indeed any other router) does not scan support.
Connect your wireless printer, not USB. Unplug the USB cable and then on the printer: Setup > network > Wireless Setup Wizard.
Then, reset the printing system:
-Sys Prefs, Print & Fax
-Right (control) click inside the box that lists your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks. -
scanner can not find the printer hp photosmart 6510 e all-in-one
I tried all the help and downloads to try that works - I don't have the disk. Somehow my printer has been removed and I got to the top but the scanner will not recognize the printer and will not scan. He says that it cannot find the printer. I tried to download all the drivers etc from windows, hp Web site. He says, make sure that it is connected to my computer? If the printer is connected wireless why my scanner isn't?
There is only one download of the complete software unique features on the HP support page, if you had installed, it would have placed a shortcut to an HP printer on your desktop, and from there you can access the diagnostics or assistance
-
HP Solution Center can't find the printer.
I have a C280 and Windows Vista. I worked OK. for years. Now the HP Solution Center would not find the printer. I tried to reinstall the printer, but the problem doesn't go away. I reinstalled Windows Vista and the printer does not have a solution. To reinstall the printer, I used the cd that came with the printer and I also downloaded the drivers for HP Web site.
I can print and make copies, but I can't get a file after scanning a document or a picture.
I'd appreciate any help.
You can try a reinstall of the software HP Solution itself, rather than just the printer drivers.
You can find a guide for it here:
http://support.HP.com/us-en/document/c02259020You can download the latest version of the complete software of features here:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=3204464#n191 -
I can't find the printer ip address
I can't find my printer address id, I printed confg. page and doesn't not found ip address, so I can't get the code for my printer, my printer is M127fn, I looked on questions and support for hp, I tried everything, but I can't find the ip address of my printer. HEEELP. !
This means that the printer have no addigned IP address.
Make sure that the ethernet cable is properly connected to the printer and the router, like trying to pass to another router's LAN port.
Allow it a minute and check again, if the persistence even try another ethernet cable and check for the difference.
Shlomi
-
If you receive one of the following error messages, and your printer is connected to your computer via a wired or wireless network, see the troubleshooting steps in the following doc: printer not found during Network Driver Setup (Windows).
- Printer not found
- Cannot find the printer
- No devices found
- Your printer is not found on your wireless network
The solutions include:
Step 1: Restart the computer, printer and router
Step 2: Check the status of network and printer connection
Step 3: Manually connect the printer to your network (only for wireless connections)
Step 4: Run the HP Print and Scan Doctor
Step 5: Temporarily disable the firewall on the computer software
-
After the upgrade of Windows 10, I need to set up my HP printer so work functions. I've looked everywhere but can't find my CD for my Deskjet 1050 all-in-One J410 series printer. I have everything, including my FedEx slip sent to me with my current address. I have the serial and FPU n # also and will give this info if necessary. I just want my printer works properly. Is there anyway that I can do it without my CD? To use an old term of chess, I'm just a 'wood' push, but you people are masters and experts, so can someone there help me, please?
Hello
Kindly click on the following link to install the driver.
I work for HP.
Say 'Thank you' by clicking on the star of congratulations in the post helped you.
Please indicate the position that solved your problem as "acceptable Solution".
-
Where can I find the print files
Hello fellow Mac'ers
I sent a file from a PC to my Macbook using Hello. I do not see the files in the print queue or anywhere else, but now I get pages virgins churning of my laser printer.
I can't print from the Mac in the form of files what if producing blank pages prevents all other files sent to the printer
If I can find where the print files are sent, I hope that, by removing the file/s, the problem can be solved.I restarted the printer, the Mac and the PC and also deleted Hello.
Hoping someone can shed some light on this problem
Open Safari and type the following URL
You should see the work queued here. If that does not work either and you don't have that one printer the fastest way is to reset the printing system
-
HP Scan Mac can't find my printer
Hello
A few days ago I bought the HP LaserJet Pro 125nw MFP. Everything works very well. I use printer via WiFi with my MacBook Pro (Yosemite 10.10). My problem is that if I turn on HP Scan, I get the error message.
See screenshots:
Can someone help me?
Thank you.
Hi @rEnEeK
I want to help you to start a new search with your 125nw LaserJet MFP Pro. From the looks of it, the question may be a communication hiccup.
We will reset the printing system, restart the computer and the printer, add new printer using the driver from HP and try to start a new search.
Reset the printing system
- Click on the Apple icon ( ), then click on System Preferences.
-
HP Photosmart C410 PC can't find the printer wireless
I have my printer wireless for a year and all of a sudden it stopped working. The printer says that the network connection is good without error. But the PC does not see it and says that it is offline. I restarted the printer. Restarted the pc. Connect the printer cable and it works fine. Reset the wireless upward. When I unplug the cable from the printer, even once the pc can't find it. I've looked everywhere and can't find how to solve this problem.
My pc is running windows 7.
I finally solve the problem by removing the printer from the computer and uninstall all related software and put it back, from scratch. This seems to have solved the problem.
-
Where can I find the Print Screen or tool captures Windows XP?
I'm in an online class. The subpoena calls for us to use the Print Screen or tool captures Windows 7. My computer is Windows XP. Where can I find these tools in Windows XP?
XP is not a cutting tool. You will need to use the print screen button with MS Paint which is a real PITA bread. I suggest you download one of these freeware tools and make life more simple.PrintKey 2000 free
http://www.Sharewarejunkies.com/00zwd2/printkey2000.htmGadwin PrintScreen
http://www.Tucows.com/preview/419481PicPick
http://PicPick.en.softonic.com/
Maybe you are looking for
-
Configurator 2.2 download apps again EACH TIME
I have three old iPhones I want to give my kids to use. I'm trying to monitor them via Apple Configurator 2 so that I can easily deploy/manage/restrict the devices. I created a profile and a plan of action and I prepared and put them all in supervi
-
How can I get the vintage B3 organ interface screen
I just started with MainStage and wanted to play with the Vintage B3 organ. User guide instruments is an explanation how to use it, but not how to get there. This is probably very simple, but I can not find
-
Cannot update iTunes after the upgrade to Windows 10
Any attempt to upgrade and/or uninstall to start a completely new download, which brings me to this error message: "the component you are trying to use is on a network unavailable resource. '" It seems that it does not find the iTunes files. Microsof
-
Windows 2008 R2 Services starts do not after windows update
I have a created .net service (which is independent) that is configured to start automatically, this service does not start automatically after a reboot after connecting to the server of the service taking a (windows update required restart) but once
-
Hello I have a 7 d that won't hold settings. It was no problem. Canon installed update to the newest firmware, and I now seem to have problems. I don't know if the update caused the problem or if the timing is a coincidence. ISO, Aperture diaphragm,