Hello - I have a laptop Windows 8 and am under Photoshop CS3. NIK software is no longer compatible with CS3 - can I upgrade to CS4 or CS5? If so, what is the price? Thank you.

Similar Questions

• I have a laptop Windows XP and win7, connected via a wireless router.

  I have a portable desktop and win7 winXP connected via a wireless router.  Can see the XP machine with the file full access Win 7 but not vice versa.  On XP, clicking on C: of the laptop gives error "C: is not accessible. You have no permissions... "How can I fix it?  As far as I can tell all together relevant upward is correct on Win7.  No password have been set.

  Hello

  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Homegroup = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Network of home or work = fundamentally similar (and better) to the previous Working Group sharing methods which allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall, AV, or other security components allow free local traffic on all network computers. If you use the 3rd group of security, firewall native Vista/XP must be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall/AV/security costumes continue to block aspects of the Local traffic even it they are off (off). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

• I can print off line. Why can't print with my printer online, you can send me an email to * address email is removed from the privacy * thank you

  If I go to the line and try to print a recipe or anything online, it does not print. the printer still does not turn on and it should be. Thank you.

  Check the web site of the manufacturer of your printer to obtain the diagnostic procedure or test to see if the printer is damaged or if there is a software or driver problem.

• I have Windows Vista with Microsoft Works. I would like to make the computer to be bilingual in English and Hebrew. How can I do? Just reply to * address email is removed from the privacy * thank you

  I have Windows Vista and you are using Microsoft Works. I would like to make my computer b bilingual English and Hebrew. How do I dot it? Just reply to * address email is removed from the privacy * thank you

  Hello

  I suggest you follow the steps in the link below and check off the question:

  How can I get additional language files? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  I hope that the information above helps you.

• How to make my $ 0 so I can Chang my store.  I cent.13 in my account and there is not any application at this price thank you

  How to make my $ 0 so I can Chang my store.  I cent.13 in my account and there is not any application at this price thank you

  How to manage unused card balances & iTunes gift

  Contact iTunes Support - http://apple.com/emea/support/itunes/contact.html - and ask them to clear your balance.

• Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Since the upgrade to Windows 10 and Creative Cloude 2015 (about the same day...), my pen (Intuos 5 Touch) is so much trolling and does more work with it. I downloaded the latest drivers. What should do? Thank you, Dany

  Hi Dan,.

  Please ensure that your Pen drivers are up-to-date. (check the manufacturer's Web site)

  Also, what exact version of Photoshop and Lightroom are you using?

  Search for graphics card drivers update as well.

  Kind regards

  Assani

• Hello, im trying to install CS2 for my mac (yosemite 10.10.3) but it does not work because PowerPC is required! This means that I can't use cs2 with my version? and if I want to use ist what to do? Thank you friends :)

  Hello, im trying to install CS2 for my mac (yosemite 10.10.3) but it does not work because PowerPC is required! This means that I can't use cs2 with my version? and if I want to use ist what to do? Thank you friends

  CS 2 is very old version that uses Power PC, but a newer version than Mac's Intel based processors. CS 2 has been designed according to the Power PC architecture.

• I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture. How can I fix it?

  I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture.

  How can I fix it? Someone please help

  Hello

  What operating system do you use?

  If you are using windows 7, I suggest you to follow the link and set the picture on the screen of the link fill and check.

  Make changes to your desktop wallpaper slideshow

  http://Windows.Microsoft.com/en-us/Windows7/make-changes-to-your-desktop-background-slide-show

• Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

  Hello

  Detect and automatically fix problems of CD/DVD
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Networking my laptop Windows XP, and the Windows Vista desktop

  Hello

  Can someone help me with my laptop Windows XP and Windows Vista desktop network?  Despite many attempts (and failures!) I was not able to get the two machines on the same network.  It's very frustrating because I'm unable to access the documents from one computer to another, i.e. file sharing etc and have spent ages trying to do this!

  I would be very gratful if anyone can solve this for me!

  Kind regards

  Here is an article on how do: http://www.informit.com/articles/article.aspx?p=1165037.

  Here is another article on how to do it: http://technet.microsoft.com/en-us/library/bb727037.aspx.

  The next thread can shed some light on the process (and provides a number of useful links):http://forums.techguy.org/networking/545552-how-do-i-network-my.html.

  I hope this helps.  Read all the articles and their references before you start, then use the one you think is the best and follow the process as indicated.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a laptop Windows 7 Home Premium, I need to upgrade to Windows 7 Professional.

  I have a laptop Windows 7 Home Premium, I need to upgrade to Windows 7 Professional. I have the installation DVD for Win7 professional provided by Microsoft Partner Network. If I try Anytime Upgrade it note that I have the license key cannot be used for this purpose. What is the best way to upgrade the laptop?

  I would prefer not to have to clean the laptop and do a fresh install.
  The interesting thing is, although the upgrade process Express reported a problem when the laptop has rebooted he went through several configuration steps, and she is now a professional Machine of Windows 7.
  I looks like that I don't have to take the measures described above.
  Thank you
  Russell

• I have a new windows 8 and you can't run my old version of foxpro 2.6

  Hi all

  Am new to this forum and apologize for discomfort caused...

  I have a new windows 8 and you can't run my old version of foxpro 2.6

  need help

  Thank you

  Original title: FoxPro 2.6 for Windows 8

  Hello

  Issues related to Foxpro are supported in the MSDN Forums. I suggest you send the request in the MSDN Forums for assistance.
  http://social.msdn.Microsoft.com/forums/en-us/home?Forum=visualfoxprogeneral

  Hope this information helps.

• When I update a message says that I must have a genuine windows validation and wait.

  When I update on windows a message says that I have to have a genuine windows validation and wait. Then I get a blank screen on http://www.microsoft.com/genuine/validate/ValidationResult.aspx?displaylang=en&End=http%3a%2f%2fwww.update.microsoft.com%2fmicrosoftupdate%2fv6%2fdefault.aspx&ReportSuccess=true&cCode=USA&Error=10&PageName=validate

  It is also interfering with my security program (ESET doesn't let me update my virus signature database.

  Thank you

  Thanks a lot for your quick response. The problem was my clock that has been set to the future (accidentally left there yesterday when checking the dates). Maybe it was wishful thinking.

• I have a laptop Windows 7, which says it's the upgrade. It puts in place upgrade now page for more than 5-6 hours.

  * Original title: upgrade Windows 10

  I have a laptop Windows 7, which says it's the upgrade.  I leave work on the upgrade to Windows 10 on 2 different days and no luck.  It puts in place upgrade now page for more than 5-6 hours.  Any help?

  Jeff

  If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

  You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

  Disable your anti-virus software so that the upgrade.

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• I have recently installed Windows 10 and when I try to print a pdf document, it automatically made save me on my hard drive. Is there any where that I can change the settings to eliminate save him? It starts to get boring.

  I have recently installed Windows 10 and when I try to print a pdf document, it automatically made save me on my hard drive. Is there any where that I can change the settings to eliminate save him? It starts to get boring.

  I thought about it! I went into the plug ins on Chrome and changed a setting. Thank you!

  Marie Larsen

  Real estate capital

  801-597-9926-cell

  [email protected]

  http://www.marielarsenrealtor.com/> www.marielarsenrealtor.com

  'f' Logo Marie Larsen-Equity real estate

  https://g.twimg.com/Twitter_logo_blue.PNG Marie_Realtor