Hello world. I, m Bengt from Sweden. Can, t connect wireless epson printer for my aspire m1.

Hello world. I, m Bengt from Sweden. Unable to connect wireless epson printer for my aspire m1. I tried the drivers of each possible site, epson, windowsupdate and more with no success. Can you help me?

Great! There is a material error in the printer! I'm going to usb it for now. Perhaps by a new printer, later! Best regards
Bengt
Thanks for a good and fast support!

Tags: Acer Laptops

Similar Questions

  • Questions from Wifi, can't connect wireless phone

    Yesterday, my router was working fine.  Then all of a sudden I can't connect to the network without using an ethernet cable.  I tried the reset of the router and restart my laptop and any troubleshooting must try.  Still not connect without using an ethernet cable.  Any help would be greatly appreciated.  What is a wireless laptop computer if I can't use it :(

    You have McAfee?  McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

    See the communication from this "criticism" - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

    I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

    I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

    - - - - - - - - - - - - -

    If you do not have McAfee then Windows update than kb2705219 can also be a cause as the uninstall that appeared to solve the problem for some users [but I'm not particularly convinced by this]. To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

  • I had a change in router and now I can not connect wireless network printer

    HP Deskjet 3050 has

    Windows 7

    I got a router change and now can not conect my printer on the wireless network. What should I do?

    Hi MaggieS, this support document provides suggestions for the correction of a reliable wireless connection. Try to work through them in the order of presentation and do not hesitate to post back if you are still not able to get connected http://support.hp.com/us-en/document/c02817031

    All the best.

  • Photosmart premium C309g-m: I can't connect wirelessly to my printer

    Hello.  I can't connect to the printer using a wireless connection. I reinstalled the printer using the installation disc, but no go!  I followed the instructions also.  I do not use a router - use hotspot from my phone or wifi to a campground.  Thanks Bob

    Sorry, not supported on a hotspot.

  • Can I connect wireless and cable?

    I work with a HP Officejet 6700 Premium, newly bought and installed in my older desktop that is wired. I would like to be able to print from my two laptops wireless as well. Is this possible? And if so, how?

    Hello

    HP Officejet 6700 can be wired to the office computer (USB) and can be connected wireless to other laptops. To install wireless, please see the link below.

    http://support.HP.com/us-en/document/c03086294

  • I can't connect my fax/printer to my Windows 7 computer completely. Everyone says "its so easy" why I have so much trouble?

    I don't know how to connect my printer to my computer.

    Hello

    It is difficult to help you as you say not what kind of printer you have and if the printer is Compatible with Windows 7.

    Here is a video from Microsoft on how to install a printer for Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    And it's good advice from Microsoft at this link:

    "There are several ways to connect a printer to your computer. An option that you choose depends on the device itself, and whether you're at home or at the office.

    Always consult the documentation that came with your model for specific instructions. »

    In other words, use the Information Documents that came with the printer, or ask the manufacturer of the printer to help or post in the Support Forums.

    This Microsoft Information also applies to Windows 7:

    "Getting started with printing.

    http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-printing

    See you soon.

  • II had built my pc cleaned he lost my webcam and I can't connect wirelessly I'm curent

    I paid to have my computer cleaned and lost my webcam and I can't connect wirelessly

    Hello

    Why don't take you back to where you guessed it 'fixed '?

    If you have a wireless network, switch power switch make sure it is turned on

    and make sure you have the latest vista drivers/software for your computer which you can get your computer manufacturers Web site

    go to their website and look for a driver and software download section

    Enter your model number for the last look drivers vista then download and install

    Is the same for your webcam a cam laptop builtin or external webcam: manufacturer of the laptop or the webcam manufacturer's website and search for Vista drivers and software

  • How can I connect my Cruz Tablet for my connection to the internet the computer?

    Original title: How can I connect to my cruz Tablet

    How can I connect my Tablet cruz for my connection to the internet the computer

    Hello

    Thanks for posting your question in the Microsoft Community.

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

    1. What is the model of the Cruz tablet number?

    2. How do you access Internet for your computer? It is through a wired connection or wireless?

    Follow the steps below:

    a. connect a network cable to the tablet computer if the Tablet has a network card. High-speed modems have an output connection to which you connect the network cable and then connect it to a computer or router.

    b. display wireless networks in network settings options. Select a wireless network, and then click on connect. In the areas of Wi - Fi hotspot, you may need to open a Web page to accept the terms of the license before plugging in.

    c. sign to a computer network or a network mobile broadband. Some tablet computers have connections to data network integrated such as the type that personal digital assistants (PDAS) and the use of cell phones. You need to register for an account with the provider of service associated with the integrated network. Alternatively, you can sign up for broadband wireless services and to access broadband that plugs into a USB port with an adapter.

    For more information, please communicate with the link below:

     

    http://www.velocitymicro.com/SupportPage.php

     

     

     

    Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

  • I can't connect wireless on the stage of the boot

    Hi all

    I hope that someone can help.

    I have a Pavilion G6 2002au and he died,

    I am trying to reinstall the windows 7 Home premium 64 on that.

    I can't connect wireless on the stage of the boot, it off when I was running for a recovery.

    dose - does anyone know how this can be done so the I can reboot the system.

    Hopefully reinstall the wireless drivers?

  • can not connect wireless or implement a new file network xwizard.dll error

    I just moved and can't set up a new home network or to connect wireless

    It shows available wireless and when I click on connect to the network, nothing happens

    When I try to put in place the new network with the Network Wizard it gives an error of xwizard.dll

    I have tried everything I can at this point and I am at a total loss of figure

    Hello

    Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

    Maybe this can help.

    These steps and tell us where is the breaking point.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    ------------------

    The wireless card drivers much also install utility wireless of the seller.

    To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

    ----------------

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

    If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

    If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    party like Hello and NetMagic 3rd network managers can block local traffic too.

    ---------------------------

    Stack TCP/IP work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ---------------------------------------------------

    A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

    Above everything is OK, you must be able to connect to the router.

    Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

    If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

    Enable security wireless after you eat to make a functional connection.

  • BlackBerry smartphones can not connect BlackBerry Pearl 9105 for PC

    Hello world

    I have the following problem:

    After using my BB Pearl 9105 for almost 3 years, I can not connect to PC more (I still menu with choice of 3 options on my smartphone when I connect, but when I click on that option "usb" or "charge", the menu appears again).

    In addition, the PC does not recognize my smartphone as a usb device. Updated BlackBerry Desktop Software and the purchase of the new Micro-USB cable did not help.

    I can still load.

    Could anyone suggest me how to solve this problem?

    Hello and welcome to the community!

    Here is a list of troubleshooting items... I hope that something will be useful:

    • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
    • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
    • KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone because of administrative permissions
    • KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when user account control is enabled
    • KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when a full version of Roxio® Media Manager is installed
    • KB28456 BlackBerry Desktop Software is unable to detect the smart phone BlackBerry when the USB selective suspend setting is enabled
    • KB28444 The BlackBerry smartphone is not detected by the BlackBerry Desktop Software, when connected by USB to a USB hub or a docking station
    • KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when connected via USB
    • KB02640 Troubleshooting USB connections
    • KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
    • KB00125 BlackBerry Desktop Software cannot detect the BlackBerry smartphone
    • KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    • KB00019 PIN code not displayed in BlackBerry Desktop Redirector
    • KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
    • KB01451 How to enable Sync advanced logging if a wired synchronization fails
    • KB19717 The BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer
    • KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
    • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...

    In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

    Check also on the incompatible software... it was reported that NTI Shadow Ninja & software can cause a conflict; Remove and reinstall the desktop software BB allows to install correctly.

    My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these. Also apologies if all are not currently available... RIM takes their monte and descends at will as they revise things.

    I hope that something it is useful!

    See you soon!

  • Can I connect VHS Video Recorder for Qosmio G20 using the antenna in the Port?

    Hello.

    I connect my G20 a very old VCR. Can I connect it to the antenna in the port? Someone at - it tried? Because it will not need to buy a cable SCART. And for what I searched by linking to the video in Port, if I want to record the signal, I have WinDVD record I did more.
    So I was wondering if connect the VCR to the antenna port. I'll be able to find and record the VHS signal on media center?
    Thank you

    I already tried on S - video In and I get black screen

    More: When I connect the laptop to a TV it works only via the S-video port. When I use the D-video port it simply doesn't work. The black screen.

    Of course you can do it. On this Qosmio laptop TV tuner works on the same principle as usual TV. You can watch movies on Qosmioplayer or using Media Center Edition VHS. In both cases start movie VHS and let Qosmioplayer or MCE sweep all TV channels. On one of them, you will see the picture of VHS VCR.

    All that s. I tested it with Qosmioplayer and MCE too. It works without any problem. I also tested recording option. This also works. Later, I edited material recorded and created DVDs.

    With short words: with Qosmio G20, you can do whatever you want. It's really good multimedia laptop.

  • I can't connect wireless in my office, but I do connect to other wireless?

    I can to another wireless network and it works perfectly, but I can't connect to a wireless network in my office but other do.i traveled with the same wireless net work once and since then, so it can connect again. What is the problem? After a repair, he said "the problem with wireless adapter or access point.
    my computer laptop description are
    Description: Antheros AR9285 802.11/b/g/n/wifi adapter
    progress: Antheros communication Inc.
    version: 9.2.0.310
    supplier: Antheros communication Inc.

    Hello

    Try this link to several methods:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/using-a-computer-connected-to-wireless-Internet-as/5f012204-72e5-498C-AF24-4f11aa114a61

    B Eddie

  • HP Photosmart B109n-z can not connect wireless

    Sorry for my bad English (I'm from Belgium)

    I bought a Hp Photosmart printer and I can't connect to my router!

    I tried severell times, but nothing has worked

    I did everything as in the video and when it tries to download router configuration message appears it can not find the

    the router and the SSID.

    Networksetup program is allso connect to my router (even with the right user name and pasword)

    Allso the program USERHPNDU cannot find anything (no SSID, no WEP, no printer key)

    My pc is connected to my router with an ethernet cable. The system is win xp home sp3

    Router Linksys WAG160N IP is: 192.168.1.1

    I even disabled my firewall and no go!

    Networkconfig page: any IP address

    TestPage wireless network:

    -Wireless on: pass

    -Wireless function: pass

    -SSID: failure

    -Security: pass

    -connected: unfinished

    signal strength: not completed

    On the bottom of the page networkconfig is printed that he had found the SSID of my network!

    Now, my printer is connected to a print server and works fine but I want to connect wireless!

    What is the solution?

    Thanks in advance,

    Paul

    Thanks for your suggestions; It solved my problem

    changed from WEP to WPA and it works

    Thank you very much

  • OfficeJet Pro 8100 - new router - can't connect wireless

    Have an Officejet Pro 8100

    Has been configured on my home network for the USB connection or wireless printing before

    Old router has not installed this new router

    Cannot be configured for access through a new wireless router

    * When you run the installation of the printer asks to plug a USB cable - I plug in - then it passes to the ask for password wireless but then say errors

    "To configure the network settings for the selected device, please temporarily connect via USB. The device can be disconnected from the USB, once the network settings are transferred. »

    BUT the USB IS plugged

    Have tried completely uninstalling printer, software, drivers, etc and then make complete re-install-without success

    Router is an ASUS RT-N66U

    Wondering if there is a way to do a complete factory reset to clear the memory of the printers I've tried unplugging, wait 5 minutes and then plug it to a real reset without success complete.

    All of the suggestions that I am at a loss.

    Hi bketchy,

    This new router has two differnet built-in radio. You must ensure that you connect to the printer the correct SSID name for 2.4 GHZ radio. If you have both the 2.4 and 5.0 GHZ configured with the same SSID, you chnange the SSIP mame which should allow you to connect to the printer. Follow the steps outlined in the document below.

    Unable to connect to a wireless network

Maybe you are looking for