Help? 100% CPU in Vista usage

Similar Questions

• Vista Enterprise using 100% CPU countiniously

  I use Vista business on dell Inspiron 6400 (had vista with laptop). The laptop has dual core processor and a CPU is used 100% without interruption since install. I have installed all updates using windows update utility. I have also disabled the indexing service and also to adjust Visual effects for best performance. The problem still exists.

  In the Task Manager, I see a peremptory touch 100% CPU graph and another pretty normal CPU graph. I have 2 GB of ram and still 1,3 GB free. I have not yet installed any software. In the list of process System Idle Process takes, 90 + CPU usage no other program uses much CPU.

  For this reason, my laptop is very slow to respond and almost useless, please help me.

  I think that I found the correct culprit this time. I tried to disable the edge of BIOS devices implemented and it worked. When narrowed "Media Card and 1394" device was causing too much hardware interrupts. My PC works fine and no CPU usage after you turn off the device. I think that the fault was in Media card on board the aircraft.

  It took me a long way to reach this solution, so to help others here you are a few steps to take to limit the problem.
  -Task Manager open to see if any software uses the CPU more than expected. If you notice any software then its easy to uninstall or disable the program at startup etc.
  -If Task Manager processors are normal and yet one or more CPU is used close to 100% and then download and run http://live.sysinternals.com/procexp.exe ProcessXP and run
  -If material interruptions take up too much cpu, then try to disable/remove your attached devices, like modems usb, wireless lan, lan card BIOS Setup etc.

  Hope this will help.

• Satellite P200 - 1EE 100% CPU with Toshiba Flash Cards usage

  Resource monitor shows 100% CPU usage constantly in recent weeks (no problem for the first 6 months that I have owned the machine) with 85 to 99% of my CPU used on 2 entries each shown as "Toshiba Flash Cards", no idea why and how I can sort this out as it slows everything down? Thank you very much

  Andy

  Hello

  The utility of Toshiba Flash Cards is a part of the Vista Toshiba value added package and it controls the functionality of buttons FN.
  Kody said already that it is advisable to reinstall the VAP to check if it would prevent the high utilization of the processor.

  You should also clean the operating system using the CCLeaner. After PPV remove you must run the CCLeaner to ensure that all of the VAP files have been deleted.

  Good bye

• 100% cpu usage

  my computer has 2002 SP3 microsoft windows xp and has 100% cpu usage, and I don't know if I can fix it.

  Iexplore is mem usage more. The computer is so slow.

  Please help me

  Thank you

  Teresa

  I think first we should know something on your system, then you should run some respectable malware removal tools and then only start troubleshooting of any problems (unless you just want to start guessing and try things).

  Because the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know almost nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  No matter what you use to antivirus/antimalware protection please follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• 100% CPU usage when playing online.

  Original title: 100% CPU utilization

  CPU USAGE XP MEDIA CENTER SP3 100% WHEN ONLINE GAMES IS NORMAL

  ALSO PC STARTS TO MAKE BIG NOISE. SWEET STARS CAN GET REALLY LOUD

  Hello

  Glad to know that the CPU works normally now. Thank you for the accommodation that we know. If you have any questions on Windows then post in this forum.

• How to list users oracle with the 100% CPU usage

  Hi Hussein.
  
  Sorry it is not really related to EBS :)
  
  EBS R12 (12.0.6)
  4.6 RHEL
  
  I see high utilization of the processor for the "frmweb" process intermittently Sometimes they show once a week.
  Here is the result of the 'top' command

  top - 17:02:38 up 132 days, 20:16,  5 users,  load average: 1.17, 1.10, 0.89
  Tasks: 523 total,   2 running, 521 sleeping,   0 stopped,   0 zombie
  Cpu(s):  9.9% us,  2.8% sy,  0.0% ni, 87.4% id,  0.0% wa,  0.0% hi,  0.0% si
  Mem:   8309152k total,  8287716k used,    21436k free,     7652k buffers
  Swap: 10482308k total,  1987192k used,  8495116k free,  3741056k cached
  
    PID USER      PR  NI %CPU    TIME+  %MEM  VIRT  RES  SHR S COMMAND
  21680 appldev2  25   0  100  26:47.62  5.9 3071m 476m  14m R frmweb
  27832 root      16   0    1   0:00.41  0.0  2576 1268  780 R top
      1 root      16   0    0   2:21.02  0.0  3504  444  416 S init

  How to get this list using ps - ef or any other linux command (without using the 'top') so that I can write a cron to kill this fugue jobs everyday at midnight.
  
  
  Thank you very much

  Hello

  There are a lot of links that should be useful here. Some links are referenced below:

  UNIX command to find the CPU usage
  http://www.Cyberciti.biz/FAQ/UNIX-command-to-find-CPU-utilization/

  How to Linux CPU utilization?
  http://blogs.Oracle.com/Pranav/2009/02/how_to_find_out_cpu_utilizatio.html

  Google search for "Use of the UC Linux" and you will get many occurrences!

  BTW, why do you want to kill these processes manually? You should find out the reason, so having a high utilization of the processor rather than kill those processes.

  Note: 745711.1 - process forms (FRMWEB) consumes 100% CPU in Oracle Applications R12
  Note: 789659.1 - how to generate a stack of forms with Applications R12 Trace

  Kind regards
  Hussein

• Firefox and Shockwaveflash 14.0.0.145 using 100% CPU

  Firefox (v30.0) normally uses the CPU of 2 to 6%.
  When I start a video using shockwave flash 14.0.0.145, firefox uses 20 to 40% of the CPU and shockwave 50-80%.
  For the most part resulting in a total of 100% CPU usage.
  This problem occurs for a week or two.
  I am running Microsoft Vista.

  You can check for problems with the current versions of the plugin Shockwave Flash and try this:

  • Check updates for your drivers drive graphics
    https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration
  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)
  • turn off hardware acceleration in the Flash plugin

  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• Svchost.exe (netsvcs) 100% cpu - update of Windows *.256 cause - update forever checks as does Defender.

  Hi, I got 100% usage cpu choking my system Toshiba laptop L300 Vista 32-bit, cause - (netsvcs) svhost.exe in time real trouble was unknown and tried everything has failed. So I did a complete new installation and fully updated to SP2 then the next update and it required me to download the latest update to terminant.256. My system is now unusable with constantly check and update svchost.exe using 100% cpu. All is well until I start to WU and I restore prior to this Windows Update Agent... Also if I close just the update it is still short in the background using 100% cpu by svchost.exe (ntsvcs) until I have manually stop the service.

  I have:

  Disabled Windows Firewall and Avast antivirus.

  I tried all the things as well in safe mode.

  Installed costs.

  Followed the instructions found on the net

  In offline mode, downloaded and installed the latest update which is the same as that.

  Whenever I have restore before this update, it works very well. The download of the update even if I have restore and install only the off-line version, it cripples even with 100% cpu and without end of audit. He made also Defender without end of audit.

  How to fix something that is a solid wall. You cannot uninstall or go around it. If I restore before it, that's all I can ever be updated Vista.

  I admit, I'm going nuts with this thing. I can't be the only one, it is 100% Windows update agent question.

  They have started to issue updates, default update clients cannot manage. Under Vista, install all the missing updates listed in the table above to this page:

  http://Wu.krelay.de/en/

  On Windows 7, install KB3172605.

  KB3172605 32-bit

  KB3172605 64-bit

  Best regards, VZ

• W7 100% CPU all the time - what can I do about it?

  Hi and thanks in advance for the help. My computer has very little memory, so I keep it really clean. Do just about everything with him, it is browse the web and stream media. Recently, it has been very slow, and Firefox (49.2) has suspended all the time. At first, I thought it was Firefox, and I followed all of their instructions to identify the high resource using plugins, etc. I deleted the history, ran CCleaner, etc.. Then I realized that even if I close FF I always see spikes frequent (approximately five seconds) to 100% CPU usage, and it often extends by 50% even if I don't do anything. I ran Avast and Malwarebytes and MSE - full scan with each of them and none of them found nothing. Is it possible that my computer resources is hacked and used by someone else?  As for mining bitcoin or something else?  How I understand this and stop it?  If it is little likely, what can I do to improve performance. It seems kind of ridiculous that open a document or a web page to "forever".  Even to write this post, I type, and then look at the screen, while the letters slowly appear...

  Not sure what is relevant for the problem, but I have 4MB of RAM, but the single 80 GB hard drive (hope I said that right), which only 29GB is free. Right now I am 1480 Cached, available from 1725 and ~ 320 is free, there are 69 total running processes. The only applications that are running are FF and two documents LibreOffice.  I checked a few days ago, and the system says that I don't have to defragment.

  I don't even know if all this has nothing to do with the peaks of the processor, so it's how little I know!

  Any help is very appreciated!

  Try running task Mgr, looking for running applications, locate the (s) using all the resources, R.click on this subject,

  Properties, see what/why use that much... In addition, 69 process is quite a bit, will try to run or cmd,.

  type: services.msc scroll through, double click on one, properties, clear the value or manual start. Manual start

  Are available on request. Also, open the event viewer, get the details of the operating system, looking for event/warning,.

  R.Click, Properties. Also streaming video uses a lot of pc resources.

• My PC spikes to 100% cpu

  My pc on 100% cpu spikes, I checked my task manager but at the top of the list is only google chrome takes up to 500 k Ko, sometimes I open a game which takes 1 KB mill, but it's okay if I opened the game or not his claws still at 100% I got intel xeon 4-core pc with geforce 4 graphics GB 16 GB of ram and more powerful avast first anti virus prog.

  Original title: CPU

  Hi Kibertrons,

  Thanks for the reply with the status of the issue.

  Here in this situation, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the troubleshooter of System Maintenance and check if it helps. This troubleshooting will help you solve common problems with Windows.

  Follow the steps to run the Troubleshooter:

  (a) press Windows + W on the keyboard.
  (b) type Troubleshooting in the search box and press ENTER.
  (c) select Troubleshooting. Click view all , and then select System Maintenance.
  (d) click Next and follow the instructions to run the troubleshooter.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. This will help you to determine which third party/PPP program causing this problem (it will determine if there any other program/third-party application another Chrome is causing this issue).

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• distnoted consume 100% cpu

  Every now and then my mbp will be completely insensitive because of a process called "distnoted" consume 100% cpu on a period of time.

  Why is this happening? Is this a virus? I have 16 GB of RAM + SSD - surely that should be record high enough to run OSX 10.11?

  The good news is that this is not a virus. This process was created by Apple and runs along the side to provide iTunes supported mobile devices. I would just try and force them to leave the application. http://www.groovypost.com/HOWTO/distnoted-exe-process-running-background-safe/

  Alternatively, you can try going here ... Step by step to fix your Mac

  Hope this helps, good luck to you.

• 100% cpu

  FF uses 100 + CPU on my MacBook, if not totally quickly updated. This, despite making all the suggested fixes, several times.

  It got so bad that it overheats my Mac constantly, causing my fan go on uninterrupted full breath, even when he is in the background, so I basically have to stop using it.

  Mozilla should take seriously and review this off-road browser.

  When they can. Many other users also need help.

• Safari more than consuming 100% CPU

  I am currently working with Safari 9.1.1 and whenever it is open it consumes 100% CPU and causes fans on my 13-inch MacBook Air to the race. For example, while describing the problem in Safari with only this tab open my CPU is 102.3% (33.2 MB memory). Besides the closure of the only open tab CPU usage remains high until I have completely quit the application. If I open the same page in another browser, the CPU of the other browser usage is much lower. Any ideas as to what is the cause and how it can be fixed will be very appreciated.

  A simple reset of the SMC should solve this problem. Please read this article to know how to do this in your device:

  Reset the management system (SCM) controller on your Mac - Apple Support

• Why Firefox uses 100% CPU when I am connected to eBay?

  Firefox uses 100% CPU when I connect eBay.

  Hi apdubois, it is useful to know that Flash is the problem but, as you point out, life without Flash is not very interactive.

  It is a standard orientation that addresses the most common reasons for problems of Flash in Firefox. I'm sure you've seen some of it before, but just in case:

  (1) make sure that all recorders/downloaders who interact with Flash media are as up-to-date as possible, or disable them temporarily.

  (2) disable graphics hardware acceleration in Firefox and Flash

  (A) in Firefox, uncheck the box here and restart:

  the button Firefox orange (or the Tools menu) > Options > advanced > General > "use hardware acceleration when available.

  (B) in Flash, see this article from Adobe technical support: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues

  (3) turn off protected mode (Windows Vista/7/8)

  See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode?

• process of LSD causing 100% cpu and beachballing

  Hi guys,.

  I hope someone can help me with this.  My computer has recently started using 100% cpu on a process called "lsd".  It totally freezes my computer and I have to hard start it again by pressing the power button.  I can force him to do it is I select a video and then choose 'Open with' as it is pulling up the following windows, it will be beachball and go to 100% cpu due to this process.

  I read something that LINC Davis had previously displayed on the console, so I went there and here's the dump for "lsd":

  11/05/2016 10:51:39.103 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:39.107 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:39.110 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:39.113 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:39.602 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:39.605 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:39.608 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:39.612 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:39.615 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:39.619 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:49.392 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:49.451 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:49.467 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:49.484 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  11/05/2016 10:51:49.502 lsd [354]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  They are all the same, so I'm not going to post it all but there are 4,000 of them in the last twenty minutes.

  Here's my imac:

  

  Thank you very much for ANY help someone can give me

  hardtofin

  You may have a corrupted the Launch Services database.

  To reset the database:

  (1) triple - click anywhere in the following line (it's a very long line) to select; Press command-C to copy

  Ework/support/lsregister /system/library/frameworks/CoreServices.framework/frameworks/LaunchServices.fram - kill - r-domain local - domain-domain user system; Killall Dock

  (2) press open Terminal, on command-V to paste, press ENTER to execute the command

  (3) restart your mac.