Help and Support service will not start

Nice day

I use Windows XP Professional on my laptop HP DV9000.

When I try to open the help and support service, I get a message saying "Windows cannot open help and support because a system service is not ongoing enforcement. To resolve this problem, start the service named 'help and Support." »

I searched many websites for more information about this problem without success.

I tried to locate the program itself and once again without success.

I did nothing to my laptop in some time (months) and have installed SP3.

I tried to follow the instructions in my research, I hope, it's enough to find help here.

JC

Advertisement

Check here: Control Panel, tools, Services, administration, scroll down to: help and Support, and then double-click to open the page.

Startup type: automatic

The service status: click Start, click OK

Tags: Windows

Similar Questions

  • help and support service does not start

    I can't get the help and assistance, to start, it is said, cannot start the service help and support on local computer. error 126: the specified module could not be found

    Hi Pamiam2,

    ·         What operating system is installed on your computer?

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1:

     

    Step 1: Start in safe mode and check if the problem persists.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

     

    Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: Try the SFC (System File Checker) scan on the computer.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

     

    Let us know if it helps.

  • Help and Support service does not not XP

    I am running XP home.

    my help and support service will not start or operate.

    Help!

    I understand that assistance and support inside the command center is not running.

    It may be that the service has been disabled.

    Follow these steps:

    1. click on the Start button

    2. click on run, type Services.msc

    3. find and double-click 'Help and Support' entry

    4. double-click the entry "Help and Support" and set the startup type to "automatic".

    ' 5. in the left pane, click "Start the service", or restart the service ", according to what appears

    Restart the computer and check the result.

    Hope this helps

    Post back if necessary

    ___________________________________________________________

    If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Help and Support service does not

    Original title: Windows XP Services
    I would like to first of all a service that is running, but when I try to open system information, I get a message that the help and Support service is not running.  How can I start the help and Support service if I can't in the system services?

    Help and Support doesn't have to be set to automatic for her to work.  You can leave the Manual value and it will start when it needs start (if he can).

    You will see only the message you describe if the H & S Service is disabled if your H & S subsystem is afflicted in some way.  If the H & S Service is not disabled, you have a different problem.

    You don't describe symptoms suggestive of a need to run sfc/scannow or symptoms suggestive of a need to register the hhctrl.ocx file, but at least he has a link to a Microsoft KB article in this answer MSE.

    You can unregister the file hhctrl.ocx and H & S will always launch very well (but the Index button will not work).

    These ideas don't make sense to me.

    Do try these things and see how they work.

  • Help and support service in services.msc

    When I try and open help and Support under XP, I get an error telling me that I need to start the help and Support service. When I go into services.msc to do this, the help and Support service is not listed

    A service help and Support missing does not fit the symptoms of a corrupt user profile.  Aid and the Support Service is at the system level and does not belong to a particular user, and if you think that your user profile is damaged, you better not delete unless you want to lose all the things belonging to the user that you delete.   This isn't a good way to manage a corrupted user profile or suspicious - unless you want that users angry!
    Have you ever used third-party applications on your system where the product description includes descriptive as sentences:
    cleaner, mechanic, detective, priest, optimize, clean up, tune up, speed up, set towards the top, compact, compress, faster, power, boost booster, guaranteed.
    The Center help and Support sometimes get broken with overzealous cleaning and there are a lot of things to 'try' who sometimes work and sometimes they are not. Sometimes people drop everything simply and never reuse Help and Support Center, but it can still be repaired.
    We can reinstall the missing help and Service support in two ways, let's start with the less complicated:
    Using Windows Explorer, find and locate c:\windows\inf\pchealth.inf.  This is the file for installation help and Support information.
    Right-click on the pchealth.inf file and choose install.
    You may be prompted to enter your XP installation CD as he seeks the installation files.  The files are on your XP installation CD, or, if you don't have any XP installation CD, files will already be on your system from the initial installation (if help and Support was working before) - you just tell the installation where to get them.
    You can locate the files on your system before you begin the installation, so that you know where to say look when he needs a file of installation.
    If you don't have an XP installation CD, change the dialog ' copy the file of ' (by clicking the browse and try again) to point to the folder appropriate for each file.  Usually, the files in these folders.
    dataspec. XML (c:\windows\servicepackfiles\i386)
    pchdt_w3.cab (c:\windows\pchealth\helpctr\binaries)
    HCAppRes.dll (c:\windows\pchealth\helpctr\binaries)
    atrace.dll (c:\windows\system32)
    If these files are not in the same place on your system, you need to do a search for Windows on your system for the file you need and point the installation in the folder appropriate for your system.
    Reboot your system to make sure that the installation is complete and check in Services now to see the status of the assistance Service.
    If the service help and Support does not work, right click, start it and then make sure that the properties are set to auto, reboot again and remember that it starts on its own.
    If for some reason that gets your help and your support Service installed (perhaps you do not find the files) you can follow the other instructions of Riou:

    Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • Help... MSSE, and Security Center will not start... ?

    Security services will not start at all, just stay off... Is this a virus... ?

    1. research of virus with MBAM and McAfee...

    2 restart disabled services, but 5 seconds later they turn off automatically...
    3. update system...
    4 checked registry...
    5. now receive error message - "code 1058 '...
    S ' PLEASE HELP... Thank you...

    Hi SirSmythikus,

    Check to see if this article helps you.

    Service starts not and displays "Error 1058"

  • When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

    Rick2425

    When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

    It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

    Hello Rick2425

    See the thread below and let me know if it helps thanks.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

  • Bluetooth support service does not start on VISTA

    When I go into the Services Panel it shows of Support Bluetooth Service is set to automatic but not started. When I try to start this service, it gives me error: 1053 indicating that the service has failed within a reasonable time. I have a MX5500 Revolution keyboard and mouse combo that works very well. But when I try to put the mini hub so he could accept the other BT devices, it hangs, freezes or crashes. I tried to uninstall and reinstall the software several times with no luck. I know that the reason that this happens, it's the BT support service does not start. Any help is appreciated.

    Hello

    Hardware devices not detected or does not work - a Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    The problems with Bluetooth devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    Set up a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    The problems with Bluetooth devices
    http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

    How to set up a Bluetooth connection
    http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

    The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
    When you click on the element - for Windows 7 this check manually
    http://support.Microsoft.com/kb/960531/en-us

    If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

    BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
    devices around you. For each detected Bluetooth device, it displays the following information:
    The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
    Last detection time and more. BluetoothView can also warn when a new Bluetooth device
    is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREEhttp://www.nirsoft.net/utils/bluetooth_viewer.html

    BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
    the standard output. For each Bluetooth device, the following information is displayed: MAC
    Address, name, Major Device Type, minor device Type and possibly the name of the company of
    the device (if the external file of MAC addresses - oui.txt is provided) - FREE
    http://www.NirSoft.NET/utils/bluetoothcl.html

    ---------------------------------------------------------------------

    More information of possible interest to some:

    What is a Bluetooth personal area network (PAN) network?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

    Connect to a Bluetooth personal area network (PAN) network
    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Error 711; Remore access connection manager service will not start

    Error 711; Remore access connection manager service will not start

    Hello

    Thanks for posting your question in the Microsoft Community!

    When exactly do you get the error message?

    This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

    This problem may occur if some or all the following services are not started:

    • Plug-and-Play
    • Remote Access Auto Connection Manager
    • Remote Access Connection Manager
    • Telephony

    You can see test link following the steps and check:

    Get help with "Error 711" message

    http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

    Do not post the State of the question.

    You can always view in Microsoft Community if you need help with Windows.

  • Windows Vista, help and support service has disappeared.

    Windows Vista, help and support service has disappeared. When I try to use Windows Vista Help & support it does not load, it is as the program was never loaded, how up-load this file? Thank you

    See this tutorial apply to the question you:
    Vista - Help and Support in Vista
    http://www.Vistax64.com/tutorials/87497-help-support-Vista.html

    t-4-2

  • Windows Help and support section is not up-to-date.

    I get a pop window indicating that the content of windows help and support section is not up-to-date. Its tells me there is a more recent version of the help and support section, but it do not offer to fix it for me.

    Hello

    Have you done a recent software or hardware changes to the system?

    You can review the article and check if that helps:

    I can't open the help that was created in Windows Help format (WinHlp32.exe)

  • My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

    My help and support is does not and same time erorr code 0 x 80070424 shows and I didn't do the fix on erroe code no chance

    Hello

    (a) don't you make changes to the computer until the problem occurred?

    (b) when was the last time it was working fine?

    (c) what are the troubleshooting steps you tried to solve the problem?

    I suggest you follow the steps in the KB article below and check if it helps:

    http://support.Microsoft.com/kb/968002

    Hope this information is helpful

  • Computers button just flashes and the computer will not start

    Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

    Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

    Hey Bowers

    you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

    otherwise, it would seem that you have a hardware problem

    Contact the manufacturer of the computer or a local reputable computer repair workshop

    Walter, the time zone traveller

  • Windows 7 help and support progam does not work

    Windows 7 Edition home premium... when I go in my program options and choose Help and support, it is said that it does not work

    Hello

    1. have you installed program Bluetooth installed on your computer?

    2 have you made changes on the computer before this problem?

    Method 1:

    I suggest you to check the status of the issue to keep the computer in a clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    Method 2:

    I suggest you go through the following article

    I can't open the help that was created in Windows Help format (WinHlp32.exe)

    http://support.Microsoft.com/kb/917607

    Method 3:

    This could be a corrupt help file, this could be done by a Bluetooth software. I have
    f you have Bluetooth in this computer, the following should work:

    a. click on start and type regedit in the search field, then press enter
    b. If you are prompted for user account control, click Yes
    (c) in the left pane, navigate to
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Assistance\Client\1.0\Namespaces\OEM\en-US\Topics
    d. in the right pane, delete the "BCRM_Bluetooth_Help" string value (REG_SZ)
    (if the string is not in the topics, you can find it under titles.)

    Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows.

  • How can I get my help and support in my menu start to start so I can use it? one of the tech told me that I had to reinstall the exe file, but it didn't help me find to reinstall the file.

    My help and support does not come to the top in my xp home computer. If I need to reinstall the program exe file, I can find to operate here? It is not on my computer.

    Hi Rex-36

    You can consult the services to see if the service is running. Click 'Start', click 'run' and in the Run dialog box, type "services.msc". On the page that has ensued, scroll down to "Help and support" and right click. Select 'Properties'. .  Look to see if the service is running and if this is not the case, click on the button to start the service. In the box "Startup type", make sure that it is in the type of start "Manual" or "automatic" . Click 'OK' and exit.

    I hope this helps.

Maybe you are looking for