Help!  Can not go beyond "a plugin (shockwave flash) is not responding.  What to do?

Similar Questions

• IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks

  Hello

   

  Thanks for posting the question in the Microsoft Community!

  You can't use the wireless connection and the message that the DNS server is not responding.

  The problem may occur if the computer is unable to connect to the DNS server.

  To check, I suggest you follow the steps:

  Method 1: Re-register the DNS

   

  a. Click Start. Type cmd in the search box and press ENTER.

  b. at the command prompt, type the following command and press ENTER:
  ipconfig/flushdns (there is a space between ipconfig and /)

  It will display the message properly emptied the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:
  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
  If this is the case, try this:

  i. enough at the command prompt ipconfig and press ENTER

  II. ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Method 2:

  a. click Start and then click Control Panel.

  b. go to the networking and sharing Center and then click on change adapter settings.

  c. right-click on connection to the Local network and select Properties.

  d. Select Internet Protocol Version 6, and then click Properties.

  e. choose the DNS server to obtain an address automatically , then press Ok.

  f. Select obtain IP address automatically.

  g. Repeat steps for Internet Protocol version 4 as well.

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/2e81fca4-35bb-4af9-86a1-7326d2fe91b3

   

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• get #0 x 80004003 error message indicating a problem that occurred when opening my Windows Live Mail and I can not respond to mail that comes in

  get message #0 x 80004003 error indicating a problem that occurred in openiing my windows Live Mail and I can not respond to mail or transmit it when well even I can receive.   Please notify.  Judy

  Hi Judy,.

  In dealing with the problem with the Windows Live Mail account, you can post your question in Windows Live Mail support for assistance.

  Hope the helps of information.

• I want to download all versions are necessary, but I can not understand what are the dated versions are currently installed in my PC?

  Re: "drivers and downloads" my computer dell laptop inspiron I6400 / E 1505; Windows vista Home premium, 32 bit OS: I want to download all versions are necessary, but I can not understand what are the dated versions are currently installed in my PC?

  Hello

  I suggest you try the given below steps that would help you to view the details of the driver.

  (a) type devmgmt.msc into the search box start and press enter.

  (b) in the Device Manager, right click on the device you need to display the version.

  (c) select Properties.

  (d) click the driver tab and display the version of the driver in the Driver Details.

  Hope this information is useful.

• I bought membership CC photography... but still my request as downloaded as a trial... and advising me to buy... When I click to buy it tell you already bought... Please help do not know what to do

  I bought the membership CC photography... but still my application at first instance... and advising me to buy... When I click to buy it tell you already bought... Please help do not know what to do

  Lightroom trial has expried so I can't use it anymore and photoshop is downloaded as a trial for 30 days

  Hi Ali,

  Please see this document to activate it:

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Double post.

  Let us know if that helps.

  Concerning

  Megah Rawat

• I have to cancel my subscription of stock of adobe, but I can not connect, what can I do?

  I have to cancel my subscription of stock of adobe, but I can not connect, what can I do?

  Hello

  I see that you have contacted the support team and your subscription has been cancelled.

  Kind regards

  Bev

• My creative cloud icon is suddenly turned gray and I can not open, what should I do?

  My creative cloud icon is suddenly turned gray and I can not open, what should I do? Should I uninstall and reinstall creative cloud?

  I have a fixed Mac (a bit old).

  Thank you in advance.

  Bladlus please use the steps listed in the "failed to install" error Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to reinstall the creative Cloud Desktop application.

• A FCP user gave me .mov PP CS5 can not open, what can I do? (Link to attached file)

  A shooting game of FCP gave me .mov PP CS5 can not open, what can I do? I guess she re-tensioned files because as they try to import in cs5 a FCP loading diologe box opens indicating: FCP XML import... Then he says that I don't have the codec necc.

  I am PC based only.

  Here is a link to a short clip which can be downloaded.

  I'm really stuck here guys. Can not reach the shooter.

  The second clip 5 can be seen and downloaded from Vimeo:

  http://Vimeo.com/27230969

  FFmbc has 32-bit, I think... so should work on Windows 32-bit or 64-bit.

  No, I can't code to save my life. FFmbc is an offshoot of FFmpeg, into a vein a little more professional/broadcast. Read more here: ffmbc - FFMedia prod - Google Project Hosting

  I just worked (a lot) to try to understand how to use it to create files that Premiere Pro will accept. There are some things a bit to roll up his sleeves and they're really more useful and more publishers of FCP switch.

• need help, can not attach the image file to my yahoo mail.

  need help, trying to compose e-mail... can not attach the image file to my yahoo mail... using firefox. Vista starter edition

  using 3 G hsdpa usb modem, model huawei E156G

  download stats is 0.00 KB its not not download, http://img337.imageshack.us/img337/2547/3ginterface.jpg

  the strange thing is that if I only download small file/pic as 50 KB download data passes through, but as 1 MB image file or more it will not pass and remained at 0.00 kb

  I tried to run administrator (always on the standard user account)---> cmd---> ipconfig/flushdns, still the same problem.

  Hi korgmeister,

  1 when was the last time it was working fine?

  2. do you have security software installed on the computer?

  3. are you able to access all Web sites?

  First of all, I suggest that you try to download the file with Windows internet explore.

  If you are able to download using Windows internet explore, then there may be a problem with the Firefox browser.

  Uninstall and reinstall Firefox browser and check.

  If you are facing a similar issue when you use Internet explore, then it may be Internet problem try to download some other file or document check if it works.

  Also contact your internet service provider to check if the connection side there is fine.

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Help: can not download even if CC & always get error 201...

  I tried all these steps on an iMac 27 "(fin 2013, OS X 10.10.5, 3,5 Ghz/32 G) and a member of the CC photography since Dec2013:"

  -Tried to update CC different times of the day/night (always get error 201)

  -Uninstalled CC and restarted.

  -Ran CC Cleaner (deleted PS CC and Lightroom too *) and restarted

  -Tried to install CC with firewall off

  -Tried to install CC in Safari and Chrome

  -Tried with disconnected laptop

  -Connected back out signed to Adobe

  -Run the iMac permissions

  -Disk checked (end)

  -Physically removed all Adobe of the library too

  -Reset the PRAM and reset the network

  -Reinstalled Adobe flashplayer and AdobeReader

  -Tried to install the version of assessment-CreativeCloud (received error 201)

  -Tried to install an older Aug2015 CreativeCloudInstaller (error 204)

  I am running out of ideas and can not find stuff more troubleshooting.

  * Note: I had to remove LR because CC has broken several months (during the previous update) and I could not update my application of LR.  As a result, the old version of LR could not read the LR library of my Macbook Air (a newer version).

  Anyone have any ideas?

  Help is really appreciated that I just returned from a trip photo with 650G new images.

  You can install anything up to (but not including) the latest versions of 2016 using direct downloads.

  You can use the appropriate link below for your installation files

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.5 | 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Please help can not activate pscs2 what he says that he cannot find an internet connection

  Please help I can not activate pscs2 - he says that he can not find a connection int5ernet

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Why Firefox always turns off "activate" on the plugin Shockwave Flash in Firefox 39

  Impossible to always select "activate" on the Shockwave Flash plugin since the upgrade to Firefox 39 today. I refuse to use this browser if I have to type "Allow and Remember" on every page that contains the flash code. He does not remember preferences, period. Have already rebooted my system, reinstalled Firefox flash and reinstalled twice. I tried uninstalling 39 and install automatically with a 37 talon but he upgraded me at 39

  Flash has been blocked yesterday had to break and actively exploited security vulnerabilities. Please update flash today to be able to use it again.

• Can not see what is placed on the disk

  On my Lenovo 3000 N200 with Vista Home basic C: (using the property) Watch 101 G used 4.2 free G but when I add up the size files in C:, they add only up to 20 G.  I understand there is a service partition that is invisible, and it is about 20G.  But where's the other 80G? Help!

  Be careful with any of these ideas, your system can be configured differently.

  Before you start deleting things, determine what exactly is take up space.

  1 could be Lenovos rescue and recovery of backup,

  I think that these can be removed by the program. I do not use it

  so can not tell you how.

  2 or maybe windows Vistas to restore the files and shadowstorage.

  Try cleaning disc, part of vista? Delete the restoration and then create

  a new restore point.

  3. I used this command from a command prompt window,

  Right click, run as administrator. Website link with explanation;

  vssadmin resize shadowstorage / For = C: / On = C: / MaxSize = 4 GB

  MaxSize is editable.

  Type vssadmin /?  for the parameters.

  EDIT: Change the syntax of the command.

• scratch the numbers on the card and can not read what do I do?

  I've wiped off the map of the SPINDLE too hard and can't read the last few numbers do - what I do?

  I guess that's the PIN to upgrade at any time?

  My PIN code does not work, what should I do?

  If your PIN does not work, try the following:

  1. check that the PIN has been entered correctly. PIN code is not case sensitive and is alpha-numeric.

  2. make sure that the PIN has not already been used to obtain a product key. A PIN can be used only once to get a product key. If the PIN has been used, you can connect to your account with your Windows Live ID (if you have it when the PIN has been entered) to access your product key or you can check your email for the confirmation e-mail, that you have received when the PIN has been consumed to access your product key.

  https://Windows.getmicrosoftkey.com/support-home.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact customer service at the:

  https://Windows.getmicrosoftkey.com/support-home.aspx

• Hi I can not understand what happened to my stroke tool.  Try to make a white border around a picture inside the canvas and he does not.  No border even after setting the parameters.  Please help someone

  Hi just trying to use my race tool to make a white border around a picture in my Web.  Simply, it does not add the white border.  Very annoying and don't know now where I made a mistake, or is it a fault.  Someone please help?

  Is it the Edit > STROKE or STROKE a path?

  What is the size in pixels of the image?
  What is the width of the line in pixels?

  Viewing at 100%?

  Is the layer stroked you the top of the layer stack?

  What is the layer blend mode and opacity?

  What has been the race blend mode and opacity of the value?