Help! Downloads and programs in the system tray do not work!

Similar Questions

• How to remove programs from the system tray without removing them from the startup?

  How to remove programs from the system tray without removing them from the startup on Windows XP folder?

  Hello

  The first step is to identify the program that represents the icon and decide whether it should be in the system tray (most are not necessary). Hold the cursor of the mouse on the icon to see the name of the program that launches the icon.

  The best bet is to click the icon to see if this opens the box of the program options. If so, look for a selection similar to "remove from the system tray.

  Alternatively, you can hide the icons in the system tray.

  Here's how:

  1. right click on the taskbar and select "Properties".

  2. in the "Notification area" click "Hide inactive icons" if she already unchecked and then click on the button "Customize".

  3. click on the ' column next to each of your current behavior and choose one of the three behaviors for each program icon that appears in the system tray: "Hide when it is idle," "Always hide", or "always show".»

  If you hide an icon, but then see it again the next time that you log on to Windows, you may need to uninstall the program to permanently remove the icon. Uninstall the program permanently removes the program from your computer. For more information, see Uninstall or change a program.

• All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work.

  Original title:. Nothing works.

  All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.

  Safe mode?

  Looks like you have a virus/trojan/worm infection pretty good...

  Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility.  Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Last night, I bought Adobe Pro XI and this morning the serial number does not work.

  Last night, I bought Adobe Pro XI and this morning the serial number does not work.  [deleted by Moderator]

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to copy and paste into the search engine does not work?

  How to copy and paste into the search engine does not work?

  It should be.

  Restart your Mac and try again.

  Other than that, make sure that OS X is updated.

  Open the App Store, and then select the updates menu.

• I have XP and had a virus. I removed the virus, but now the system restore will not work. I tried Safe Mode but clings to the confirm restore point selection. Help

  System Restore will not work

  Hi FriendFriend,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you receive an error message when running the system restore?

  I suggest that you put the computer in a clean boot state, and then try to clean boot.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to examine the system restore service errors.

  (a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.

  (b) click on the category System .

  (c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• XP pro have two problems: the system restore will not work and rdpclip seems to work computer

  I had a virus, trogan, stopzilla online to fix the problem after allowing access to my computer, (it's a virus) tried to uninstall this program, finally just disabled and removed from the start menu.

  Now, in the pc Registry mechanic tool the first thing listed is rdpclip as run from my computer.
  Since that time I have been unable to use system restore from windows system.   only restore I access is
  from backups of registry mechanic even if I went and set on system restore after that I checked the settings and discovered that they had been handed over to OFF.
  I used the restore before so I know it worked before the access help online.

  Is the solution just to disable repclip?   I have access to my computer so that I have to allow access by external connection...
  computer programs run more slowly, there is always time to wait before the update when I try to use wp-admin to make changes on my Web site.

  Former title changed, but explains the problem
  XP pro, has had a problem with virus removal program, it turned off because it wouldn't uninstall.  Now when I run Registry mechanic it shows my system being run by rdclip.  I can't use the windows system restore.  Points on the calendar are lit up but do not work.  Can I use mechanic registry to disable the rdclip? in auto start menu?  If so this might restore ability to use the system restore?

  Hello

   
  1. you receive an error message when running the system restore?
  2. which antivirus app do you use?
  3. what happened when you try to uninstall the program?

  4, are service packs installed on your computer?

   

  To uninstall the application:

  Method 1:

  Run the hotfix, restart the computer and try to uninstall

  Problems with programs that cannot be installed or uninstalled.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

   

  Method 2:

  I suggest to keep the computer in a clean boot state and check the status of the issue.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: While perform analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost
   
  To solve the problem of system restore:
  I would sugggest you to go through the link following.
  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP.

  http://support.Microsoft.com/kb/302796

   

• My computer sometimes suddenly restart after disk defragmentation and applied restore.it system still does not work. Can someone help me? : ()

  I need help on my computer, it's a window Vista Home Basic. Sometimes my computer rebooted or encountered problem blue screen. Is it related to my anti virus program or any hardware or software failure? I try to solve it, Defrag disk and system restore, but it still does not work.

  Do you have an antivirus installed? Otherwise download, update and scan with this

  http://www.Microsoft.com/security_essentials/

  Follow these steps

  http://support.Microsoft.com/kb/929135

  and this

  1. Open an elevated command prompt. To do this, click Start, click principally made programs,Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833
  http://www.howtogeek.com/HOWTO/Windows-Vista/verify-the-integrity-of-Windows-Vista-system-files/

• Okay, so my problem is that Disk Defragmenter, disk checking and the system restore will not work.

  I tried to go to the c drive and right on it and going click Tools then error checking, but it did not work. I tried dfrg.in and right click to install. I tried to use cmd fixes, I found on the net. I tried a lot of bugs, but nothing helped. Any ideas? Thanks for your time. Here are some links with difficulties, I've tried. I don't know he said that my c drive is dirty my c drive is mt RAW disk fnctions used due to the command chkdsk/f.

  http://www.theeldergeek.com/forum/index.php?showtopic=28251
  http://www.andreasroom.com/blog/archive/2004/01/18/Defrag.aspx

  xador,
  If you start the command prompt and run Chkdsk/r you get an error right then or after restart and tries the kick-off of the check?  What is the error message you get?  You have all the maintenance of the system or registry cleaner program installed or running?  You have your running antivirus software?

  Let us know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help the evolution of security questions and answers that the quick instructions do not work because they say to click on / use the prompts are not there!

  Went to quick help with trouble with memory security question answers, b/c I don't remember my answers of course. And so... the instructions were to connect to the Apple ID account, then click on the security option, and then he said to click on security questions of rearmament (1st issue), which was NOT the case to be found. It has been mentioned that if it wasn't an option, then that may mean that you do not have a rescue located in your account email, BUT I DO. Another potential problem that was mentioned was that I could possibly try to answer the questions too often wrong and there will be some time before the option reset the q would be available again (or at all exist in the 1st place, I expect). But the actual amount of the supposed time out time is never mentioned anywhere, and the reset option is not appear after a period of time I wait and start again to try again. So, what's the problem? Idk what to do, if someone knows the answer or can help so I must not call technical support that would be amazing! Thank you very much!

  -Sincerely, daughter of Tech-illiterate.

  If you know your password Apple ID, what ever you do the call will last about 3 minutes.

  Is - not worth the time to solve the problem?

  If your email address of rescue has never been verified, it cannot be used. The time-out period is not mentioned as part of the character course of these processes. Why share with someone trying to hack your account how long they have to wait to try again?

• Messages arrive, but the "Inbox" or any other folder open even if the content still there (and almost all the menu items do not work)!

  Using last Thunderbird on Windows 7. Had problems with the operating system and had to use a system restore. When I opened TB, it displays the folders in the left pane, but the credits of "Thunderbird Mail-...» "and the 3 topics: E-mail; Accounts; and advanced features. None of the files would open. I used the "Search messages" function and has been able to show existing and new messages in the 'Inbox '. Also wanted to know if files are always in my 'profile'... and they were all there where they should be. (And almost all the menu items are disabled).
  I wonder if I need to reinstall Thunderbird... maybe the OS issues this morning - and restore - have corrupted or damaged key elements of the program?
  Thank you...

  System Restore is not always a very good thing for applications.

  Reinstall is unlikely to help. But if your accounts are all imap and that you do not have a lot of other data (address book, for example) in Thunderbird, you could start from scratch.

  But before that, you should try Thunderbird started in SafeMode https://support.mozilla.org/en-US/kb/safe-mode-thunderbird

• The system image does not work on win7 Home Premium HP Pavilion Elite HPE 250f

  The system image (and Windows Backup with and without Image system options) just do not start with the same error message indicating insufficient space for "Volume Shadow copy".

  HD has about 100 MB for the operating system and other files more about 11 GB for HP Factory Image.  Trying to backup to an external drive, Iomega USB with 650 GB of capacity.  External hard drive now empty but has been used before.

  HP support has no answer!

  April 24, 2013

  Just thought I'd give you the answer to this old problem.

  Windows 7 (for earlier versions) work as described in the help of the screen except that the VSS mode

  must be turned on.  This allows Windows to actuall save parts of the operating system

  Although these parts are involved in the actual backup.

  Shame on the HP technical support for not knowing this.

  In addition, the original tech support suggestion was to call Microsoft.

  With a new HP PC you have no direct support from Microsoft (free).

  It took me a while to work with Paragon Backup (wonderful product) to realize that VSS

  must be enabled in the operating system for these virtual backup features to work.

  {Information}

• I have a game called lego rock raiders that it installs but wont run with d3drm.dll. I tried to download this file, but the game still does not work

  I tried the compatabity program and went to the site of lego looking for patches and found nothing

  Hello

  D3DRM. DLL is the library of dynamic links for Direct3D Retained Mode

  Check out this link. It should help

  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/thread/a0c2561b-492C-42d7-8f92-c55fe278808d

  It may be useful