Help-exporter

Similar Questions

• Hey. I need help exporting photos.

  My Lightroom exports without my changes to the photo. Even the photo that I initially exported started originals

  Hello Carolina,

  Please visit the below link and discussion.

  How do I export photos from Photoshop Lightroom

  How to save image Lightroom changes in the source file?

  Let us know if that helps.

  Kind regards

  Mohit

• Helps Export-CSV

  $vms = Get-VM -rental "somehost"

  foreach

  ($vm in $vms){

  $vmobj_hds = $vm. Hard drives

  foreach ($vmhd in $vmobj_hds){

  Write-Host $vm. Name, $vmhd. File name}

  }

  I need to change that to Write-Host to Export-CSV with the following titles, the name of VM, HardDisk2 1 hard disk, etc. 1 hard disk should be the. HarDisk.Filename info. I've always had problems with the select - export-csv cmdlets and property. Any help would be appreciated.

  Hello BrianGordon84-

  Try something like:

  ## get the VMs, sort descending by number of harddisksGet-VM | Sort @{e={($_.ExtensionData.Config.Hardware.Device | ?{$_ -is [VMware.Vim.VirtualDisk]}).count}} -Descending | %{    $vm = $_    ## make an object in which to put the info    $oInfo = New-Object -Type PSObject -Property @{VMname = $vm.Name}    ## for each harddisk, add a property to the info object with the harddisk name and filename    Get-HardDisk -VM $vm | %{        $oInfo | Add-Member -MemberType NoteProperty -Name $_.Name -Value $_.Filename    } ## end foreach-object    ## return the info object    $oInfo} | Export-Csv -NoTypeInfo C:\temp\vmDiskInfo.csv
  

  Sorting after the Get - VM is there to ensure that the first exported object has most of the hard drives, which is what makes the exported CSV have the right number of columns.  The headers in the CSV file are made based on the first object out.

  The code could be optimized a bit by using Get - view, but your question was about the Export-Csv.

  How do I?

• Please help: export of lots panels

  Hello world!

  I work in an animation studio where our artists work directly in Photoshop CS5 to draw story boards (3 panels everywhere). We have major difficulties to find out how to successfully convert our action (which exports the three panels in the form of tiff images) in a batch process.

  that would be incredibly helpful and save a lot of time.

  Basically just action selects each channel of the main storyboard (three lanes for three panel areas), copies/pastes the image into a new canvas, recorded this new image to TIFF on the desktop. For this, as for all three panels and yields three TIFFs on my desk, I have to then drag and drop in a folder before running the action on the next page, otherwise it will replace the former Tower of images (check on them).

  To help automate > batch does not work and I wonder if it is even possible to run a package or if the action is simply too complex because it creates three new image files. Does anyone have ideas of things I could try? Appreciate very much all the advice!

  Thank you very much

  Justina

  Yes, you use the alpha to crop load Alpha channel Panel 1as a selection then do menu Image > crop save Panel 1 does change not the name of the image, then use the history to return before harvest channel alpha panel2 etc., record the action I have described above,

• Need help exporting transparent gifs to flash - rough edges

  Hello

  I have a flash header that I'm building for a Web site. The layers I export for the web have a rough white edge (gif.s - save for web). Basically I'm transmitting to the flower of another color group, save a layer in Photoshop.

  A path would help? The image in the library is configured to allow smoothing.

  Here is a link to a screen shot in a new window.

  http://www.kineticcreativeco.com/forums/index.html

  GIF a no' soft 'transparent if I understand; are the psd or png-24 can be used for you?

• Help export multiple sounds with batch processing

  This can be a real noob question, but did not find anything on this. But let's say I have 20 unique files. All files have different names on them, but I want to export them as ex: from 'sound_file_01' to 'sound_file_20 '. How can I do this?

  sound_file_01

  sound_file_02

  sound_file_03

  sound_file_04

  .. and so on...
  

  
  

  It's just for me not having to manually save every single file in numerical order at the end.
  
  

  Well that's a difficult question because there is not a way to get him out in hearing unfortunately. That is why no other answer (s). If I did, I'd let lot hearing save files like it does and then rename them using a third-party application. There are loads out there on the net which can be able to do what you want. I use the feature name change in Directory Opus, which I use as my main PC file Explorer because it has many other useful features to manage files.

• Need help, export a sequence from Premiere Pro to import into Encore...

  I read that the first Pro CC does not offer the possibility to send an edited still sequence through the Adobe Dynamic Link, so I think that my only option then is to export the sequence in the form of audio and video media files and then import those in yet.  Could someone provide some guidance as to what the best settings are to export a sequence of PP to make a DVD?  I am new to the game and export first opens a window with terms largely unknown to me, if no offer of suggestion and/or clarity of these terms would be quite awesome!  Thanks for the patience.

  DVD I have are DVD + R 4.7 GB / 120 min.

  When you source is interlaced together HD mpeg2-dvd preset to higher areas.

  After export, you will have two files, an audio and a video.

  That are still important, do menu and burn.

• Help export the settings from CC to CC 2014

  Hello, our team, where everyone is on a Mac OSX 10.7.5 has recently upgraded to AI and PSD CC 2014.  Before we had synchronization problems with our settings, in which synchronization seem simply cannot travel between computers.  However, it is our new program, we strive to synchronize all our personal settings of Ia CC to CC AI, 2014.  We export our EDIT settings > MY SETTINGS > EXPORT SETTINGS in the CC and then in 2014 we run the import function, selecting the exported file and all get the same message "file contains no parameters valid illustrator.  Please select a valid settings file. "Please advise on how we can have our trip settings we don't need st until our workspaces again on all computers.  Thank you.

  You can manually move the files from the old location to the new settings:

  Workspaces: ~/Library/Preferences/Adobe Illustrator 17 parameters/fr_FR/areas of work

  Keyboard shortcuts: ~/Library/Preferences/Adobe Illustrator 17 parameters/en_US

  The new location would be the same, except 'Adobe Illustrator 17 parameters' becomes 'Adobe Illustrator 18 parameters.

• [Help] Export or copy a virtual copy of a library to another library?

  Hi all

  I have to be able to extract or export a virtual copy (VC) of a library to another library. The same image that depend on the VC is represented in both libraries, but as a friend is going to be edit some images on his computer and therefor, its library, that I need to be able to import the different VC he brings to my library later or maybe merge because he needs to the VC I.

  So please, can someone tell me how to do this. If we make only a few changes of a RAW we just save metadata and we ended up, but with the VC, it's different.

  Thanks in advance!

  Use file > export as catalog in the current catalog and using file > import from catalog

  Ask yourself if it's really a good idea to (a) works with several catalogues and (b) the same image in more than one catalog catalog. As you found, working with multiple catalogs introduced inefficiencies like trying to copy the VCs autour, while the same image in more than one catalog of cataloguing is a recipe for confusion. Maybe you should ask how to solve the underlying problem of workflow?

  John

• help export the DVD movie

  I did it before, but on Windows first CS3. I work on Mac with first CS4 now, is different. I am grateful not what function to use. Please remind me how to do this. Thank you.

  Dynamic links in Encore. Or AVI or MPEG2-DVD by Adobe Media Encoder export and import those in yet.

• Helps export jpg in the same folder with the psd files

  It's maybe a stupid question, but I can't understand this.  When I use CS4 for working on a photo it is important (self stacked) with the original CR2 (Canon) file without problem.  What I understand to convert the PSD file to jpg, it must be exported as a jpg.  When I do that and check the box to stack with original and then go into the library; I see not the jpg until I sync the folder.  Is it possible to have the jpg file appear in the stack without having to SNYC manually whenever I have it change?  I hope that makes sense!

  Alan

  In the export dialog box where you configure all of your options.  Under Export location, there is a checkbox "add to catalogue".  If you check that option can also stack the copies with others.

• Need help to export results to csv format script

  Hi guys,.

  Need help, export results to csv can someone help me. Thank you.

  Connect-VIServer test

  $cluster = 'test '.

  $clustername = get-cluster $cluster

  $Clusters = get-View - ViewType ComputeResource |? Name - as $clustername.name

  $Clusters | % {

  $Cluste = $_

  $VMHostsView = $null

  $VMHostsView = get-view $Cluste.Host - name, Hardware Config, property

  $VMss = $clustername | Get - VM

  $HostCount = ($VMHostsView |) Measure - Object). County

  $VMCount = 0 + ($VMss |) Measure - Object). County

  $VMsPerHost = [math]: round (($VMCount/$HostCount), 1).

  $vCPU = 0 + ($VMss: measure-object-sum - NumCPU property). Sum

  $allocatedram = 0 + ($VMss: measure-object-sum - memorygb property). Sum

  $avgrampervm = [math]: round (($allocatedram/$VMCount), 1).

  $pCPUSocket = ($VMHostsView | % {$_.}) Hardware.CPUInfo.NumCpuPackages} | Measure - Object - sum). Sum

  $TpCPUSocket += $pCPUSocket

  $pCPUCore = ($VMHostsView | % {$_.}) Hardware.CPUInfo.NumCpuCores} | Measure - Object - sum). Sum

  $vCPUPerpCPUCore = [math]: round (($vCPU/$pCPUCore), 1).

  $onenode = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - 1 first | (measure - object - property memorytotalGB-sum) .sum)

  $twonode = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - first 2 | (measure - object - property memorytotalGB-sum) .sum)

  $onenodepcpucores = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - 1 first | (measure - object - property numcpu-sum) .sum)

  $twonodepcpucores = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - first 2 | (measure - object - property numcpu-sum) .sum)

  $totalclusterpcores_failover1 = $pcpucore - $onenodepcpucores

  $totalclusterpcores_failover2 = $pcpucore - $twonodepcpucores

  $TotalClusterRAMGB = [math]: tour ((Get-cluster $cluster | get-vmhost | % {$_} | mesure-objet-propriété memorytotalGB-somme) .sum)

  $TotalClusterRAMFailoverOne = [math]: round (($TotalClusterRAMGB-$onenode))

  $TotalClusterRAMFailvoerTwo = [math]: round (($TotalClusterRAMGB-$twonode))

  $TotalClusterRAMusageGB = [math]: tour ((Get-cluster $cluster | get-vmhost | % {$_} | mesure-objet-propriété memoryusageGB-somme) .sum)

  $TotalClusterRAMUsagePercent = [math]: round (($TotalClusterRAMusageGB/$TotalClusterRAMGB) * 100)

  $TotalClusterRAMFreeGB = [math]: round (($TotalClusterRAMGB - $TotalClusterRAMUsageGB))

  $TotalClusterRAMReservedGB = [math]: round (($TotalClusterRAMGB/100) * 15)

  $TotalClusterRAMAvailable = [math]: round (($TotalClusterRAMFreeGB - $TotalClusterRAMReservedGB))

  $TotalClusterRAMAvailable_FailoverOne = [math]: round (($TotalClusterRAMAvailable-$onenode))

  $TotalClusterRAMAvailable_failoverTwo = [math]: round (($TotalClusterRAMAvailable-$twonode))

  $TotalClustervcpuperpcore_FailoverOne = [math]: round (($vCPU/$totalclusterpcores_failover1), 2)

  $TotalClustervcpuperpcore_failoverTwo = [math]: round (($vCPU/$totalclusterpcores_failover2), 2)

  $newvmcount = [math]: round (($TotalClusterRAMAvailable/$avgrampervm))

  $newvmcount_failover1 = [math]: round (($TotalClusterRAMAvailable_failoverone/$avgrampervm))

  $newvmcount_failover2 = [math]: round (($TotalClusterRAMAvailable_failovertwo/$avgrampervm))

  $afternewvmvcpu1 = $vcpu + $newvmcount

  $afternewvmvcpu2 = $afternewvmvcpu1 + $newvmcount

  $new1vcpupcpuratio = [math]: round (($afternewvmvcpu1/$pCPUCore), 1).

  $new2vcpupcpuratio = [math]: round (($afternewvmvcpu2/$pCPUCore), 1).

  New-Object PSObject |

  Add-Member-pass NoteProperty 'NOMCLUSTER' $clustername.name |

  Add-Member-pass NoteProperty 'TotalClusterHostCount' $HostCount |

  Add-Member-pass NoteProperty 'TotalClusterVMCount' $VMCount |

  Add-Member-pass NoteProperty "of AverageVM / Host" $VMsPerHost |

  Add-Member-pass NoteProperty 'TotalClusterpCPUSocket' $TpCPUSocket |

  Add-Member-pass NoteProperty 'TotalClusterpCPUCore' $pCPUCore |

  Add-Member-pass NoteProperty 'TotalClustervCPUCount' $VCPU |

  Add-Member-pass NoteProperty ' TotalClustervCPU/pCPUCore' $vcpuperpcpucore |

  Add-Member-pass NoteProperty "TotalClustervCPU/pCPUCore after 1 failover" $TotalClustervcpuperpcore_FailoverOne |

  Add-Member-pass NoteProperty ' TotalClustervCPU/pCPUCore after Failvoer 2' $TotalClustervcpuperpcore_Failovertwo |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB' $TotalClusterRAMGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB_Failover1' $TotalClusterRAMFailoverOne |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB_failover2' $TotalClusterRAMFailvoerTwo |

  Add-Member-pass NoteProperty 'TotalClusterRAMUSAGEPercent' $TotalClusterRAMUsagePercent |

  Add-Member-pass NoteProperty 'TotalClusterRAMUsageGB' $TotalClusterRAMusageGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMFreeGB' $TotalClusterRAMfreeGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMReservedGB(15%) '. "$TotalClusterRAMReservedGB |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB' $TotalClusterRAMAvailable |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB after 1 failover' $TotalClusterRAMAvailable_FailoverOne |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB after failover 2' $TotalClusterRAMAvailable_FailoverTwo |

  Add-Member-pass NoteProperty 'Allocated RAM by virtual computer on an average' $avgrampervm |

  Add-Member-pass NoteProperty 'NEW virtual machines that can be configured based on the average of RAM virtual computer' $newvmcount |

  Add-Member-pass NoteProperty 'NEW virtual machines that can be configured based on the average of RAM virtual computer after 1 failover' $newvmcount_failover1 |

  Add-Member-pass NoteProperty 'NEW virtual machine that can be provisioned littleboy average RAM per virtual computer after failover 2' $newvmcount_failover2 |

  Add-Member-pass NoteProperty "vCPU/pCore ratio after new VM provisioning with 1vcpu" $new1vcpupcpuratio |

  Add-Member-pass NoteProperty ' vCPU/pCore ratio after new VM provisioning with 2vcpu' $new2vcpupcpuratio

  }

  Get-cluster $cluster | Get-vmhost | % {

  $vmhost = $_

  $VMHostView = $VMHost | Get-View

  $VMHostModel = ($VMHostsView | % {$_.}) Hardware.SystemInfo} | Model object-group | Sort - down County | Select - 1 first). Name

  $VMs = $VMHost | Get - VM #|? { $_. PowerState - eq "Receptor"}

  $TotalRAMGB = [math]: round ($vmhost. MemoryTotalGB)

  $TotalRAMUsageGB = [math]: round ($vmhost. MemoryUsageGB)

  $TotalRAMfreeGB = [math]: round ($TotalRAMGB - $TotalRAMUsageGB)

  $PercRAMUsed = [math]: round (($TotalRAMUsageGB/$TotalRAMGB) * 100)

  $TotalRAMReservedFree = [math]: round (($TotalRAMGB/100) * 15)

  $TotalRAMAvailable = [math]: round (($TotalRAMfreegb-$totalramreservedfree))

  New-Object PSObject |

  Add-Member-pass NoteProperty 'VMhost' $vmhost. Name |

  Add-Member-pass NoteProperty model $vmhostmodel |

  Add-Member-pass NoteProperty Sockets $VMHostView.Hardware.cpuinfo.NumCPUPackages |

  Add-Member-pass NoteProperty Cores $VMHostView.Hardware.cpuinfo.NumCPUCores |

  Add-Member-pass NoteProperty son $VMHostView.Hardware.cpuinfo.NumCPUThreads |

  Add-Member-pass NoteProperty VMCount (($VMs | mesure-objet).) County) |

  Add-Member-pass NoteProperty vCPU (0 + ($VMs: measure-object-NumCPU of the sum).) Sum).

  Add-Member-pass NoteProperty vCPUperCore ((0 + ($VMs | mesure-objet-NumCPU de la somme).)) Sum)/$VMHostView.hardware.cpuinfo.NumCPUCores) |

  Add-Member-pass NoteProperty 'RAMGB' $TotalRAMGB |

  Add-Member-pass NoteProperty 'RAMUsageGB' $totalramusageGB |

  Add-Member-pass NoteProperty 'RAMFreeGB' $totalramfreeGB |

  Add-Member-pass NoteProperty 'RAMUsage %' $PercRAMused |

  Add-Member-pass NoteProperty 'RAMReservedGB(15%) '. "$totalramreservedfree |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB' $totalramavailable

  }| Sort VMhost | FT-auto * | Out-String-width 1024

  See the attached script

• Cannot export or download site. Help.

  Hey

  I get the MuseJAssert: error calling the function switch: TypeError: cannot read property 'style' null error whenever I export my site in html. Even download using FTP gives a problem "error creating the folder of images".

  The only thing I did was to publish the site (http://patanka.businesscatalyst.com/index.html)

  Please help export urgently.

  Thank you

  Are you still facing the same issue? If yes then please send the muse card to [email protected] with this forum link in the subject line.

  Thank you

  Sanjit

• I am unable to check my account to be able to synchronize Firefox because the button check, they sent me in an e-mail message has failed, can you help me?

  When I try to check my Firefox account since the AOL email they sent me to check, it goes to a white screen. I checked the results on Mozilla's Support page without success. Appartently others have the same complaint. I use Mozilla Firefox as my browser on a Windows 7 operating system, and AOL is my email provider.

  This article should help:
  Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
  The next step is to this email as an attachment to yourself, open it on the other computer (with any browser you use) and ta - da! You have your bookmarks!

• I can't export my bookmarks because I can't access the bookmarks icon in the address bar. It is hidden so I can't go to the library where it shows the export

  Described in section help export process works well on older versions of Firefox and I used this when I ran Windows XP, but now I'm on W7 and my browser does not display the bookmarks option to export bookmarks to an HTML file. How can this utility?

  Firefox hides the combo of the Favorites menu button when you have the full menu bar displayed: in this case, you can use the bookmarks menu in the menu bar. Or you can switch back to the button orange Firefox (with the menu two compact columns) such as described in this article: the menu of Firefox instead of the menu bar button.

  If you are a person focused on the keyboard, you can open the library section bookmarks dialog box by pressing Ctrl + Shift + b (for history, Ctrl + Shift + h, downloads, Ctrl + j).