Help fix the husband XP2 system (we have home network, mine is Vista, its XP)

Similar Questions

• Adobe still the software that is used to decode the media is not available on this system. install the correct decoders for the file you are editing can help fix the problem

  Hello

  I got this message after the import on ten H.264 files that I coded for Adobe media encoder.  "It is not available on this system from adobe yet the software that is used to decode the media. install the correct decoders for the file you are editing can help fix the problem. »

  The files that we have shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with always the same error.

  I also tried a new project and after about ten or so files imported into a timeline, the breakdown of the system.  I tried twice...

  Thanks in advance

  Please report to us. I don't know the exact specifications. for stills in still, the limit is 4000 pixels in the largest dimension for PrPro.

  Now, I must add that in PS. resizing algorithms are better, in my opinion, than those of PrPro and again. This means that there is nothing to gain and quality of untying, important images much larger than the size of the frame of the project, i.e. of 720 x 480 for NTSC SD projects yet. The size of the image will be the limiting factor, so scratch that.

  Even in projects PrPro, I resize to exactly what I need. If I will not pan on a zoomed image, I resize it to the size of the image of the project. If I move on a zoomed image, I resize just what I need.

  Good luck

  Hunt

• During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista.

  7 Windows vista upgrade problem

  During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista. No idea what could be the cause of the crash?

  Hello

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7

  Check out the following link for more information about how to upgrade Windows Vista to Windows 7

  Upgrade Windows Vista to Windows 7

• Residential Group / Network ID Issuee as I can't get the homegroup to connect to my home network

  I am running Win 7 Pro on my laptop and can't get the homegroup to connect to my home network. I have two other computers (wired, one wireless) which are connected and share without problem and can even see (that) the name of my laptop on the network home.

  When I run the troubleshooter to homegroup, it is to identify a network problem, but the next step cannot identify a because my laptop connects wireless both at home and on the road. I think that the problem is in my setting of the network ID and the Discovery Mode as when I try to change the setting for network ID for 'Home' instead of 'Business' it resets right back to business. Same thing happens with trying to turn the discovery mode 'On', it is 'Off '.

  I appreciate all the help that I have been fighting this issue for awhile now and just have not had time to fix.

  Thank you

  Robert

  Hello Robert,.

  Here are the network discovery. Since they may not appear in the Windows Firewall, the place to download Simple Service Discovery Protocol (SSDP-In) and outside, you try to check these services whether or not they are running.

  Follow ' Sebastian Woolley"" "response on August 18."
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4BFF-4DD3-ACEC-ffc3524d44a4

  I hope this helps. Feel free to write us back for assistance.

  Thank you

• How to scan a document HP MFP127fn for my Ipad Air2 (the two are connected to my home network)

  Hi, how to scan a document HP MFP127fn for my Ipad Air2?

  The two are connected to my home network - the HP printer is connected by ethernet cable, and the Air2 Ipad connected by WiFi.

  I can print from the Ipad to the printer but cannot scan.

  The printer is properly connected (IE, it scans to another laptop (windows 7) without problems)

  Hi @regtown,

  My bad

  Looks like you won't be able to scan to PC or Mac with this printer. HP ePrint app is certainly compatible via iOS for printing, but it won't help you analyze for iPad.

  Kind regards

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• I can connect to the internet, but not to my home network

  I have a PC running Windows XP SP3, which is connected to a Linksys WRT300N router. I have access to the internet. I can not connect to my home network; don't know what happened. all (3) computers are set to the same workgroup name. I can't find anywhere in the network settings for WinXP that relates my network name. Help!

  Thanks for any help you can provide.

  John

  I guess that the other two computers are working properly and that it can network together and that the only problem is the XP machine.  I'm also assuming that this problem persists when the firewall was disabled (including hidden like the one in the Cisco VPN client).  I also assume you mean by "is no longer connect to my home network" that you can't see other computers in your network neighborhood. See if this article helps you:

  "You can't see the other computers in the workgroup on the network on a Windows XP computer"
    <>http://support.Microsoft.com/kb/903267 >

  If this does not help, try to walk your way through the following:
  "How to troubleshoot network domestic in Windows XP"
    <>http://support.Microsoft.com/kb/308007 >

  HTH,
  JW

• Unable to connect computer with Windows 7 operating system to XP Home network

  I have a home network cable, put in place with the primary being my XP computer. All other computers on the network are working perfectly, but since the purchase of a new computer with Windows 7 OS, I could not connect the new computer to my network.

  Any help is appreciated!

  http://social.answers.Microsoft.com/forums/en-us/w7network/threads

  Connect to the Internet, a host group and e-mail.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Set up a home network on a Vista computer. Added my XP computer on the network. I can go on the internet but the signal strength is 'very low' 98% of the time.

  I used a d-link WBR-1310 Wireless G router to set up the network on my Vista computer.  On my XP computer, I used an adapter G USB 2.0 Wireless d-link WUA-1340.  Both computers are single room apart and most of the time, the doors are open, so there is no major obstacle to interfere with the signal.  This is my first experience on the implementation of a network and I must admit I was a little unsure of myself.  I don't know if I have some incorrect settings or if the problem may be something else.  It is a WEP secure network but I don't think that's the problem.  My XP computer on the network automatically signs as soon as it starts.  I am trying to download the LLTP from Microsoft on my XP machine, but I don't know if this could be the problem.  I've been struggling with this problem for almost 4 weeks and I'm getting very frustrated.

  PLEASE, I WELCOME ANYONE WITH AN IDEA OF WHAT I HAVE DONE WRONG, TO ANSWER!

  I'm sorry, but I read your post and I do not understand what the problem is you want to solve.  Is something that does not properly?  If so, please give us the details: what you're trying to do, what happens when you do that, the text of the error messages, etc.

• Why gadmai 208/pt218 does not work with the 64-bit system (I have just a 32-bit driver)

  hardware driver not installed

  Hi Andry,

  Thanks for posting your question in the Microsoft Community.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. What is the brand and model of the computer?

  2. What is the error message that is accurate or complete?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

   

  For more information:

   

  Contact Support Gadmei:

  http://www.gadmeisrilanka.com/gadmei-contact-details-numbers.php

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• How to fix the "material changes may not have been detected.

  Hello

  Today, I have install Windows, does everything that I usually do after installing for example installation drivers etc... But I have this problem that I can not set my brightness, I can't fix it. So I have lots of suggestions how to fix, she didin't worked. So I decide to check the resolution of the problems and has found (photo below). So how to fix it? Maybe it will fix my problem with brightness. My PC is HP 2000 Notebook PC

  http://www.part.lt/perziura/25ad002d7ffb45e1d5cc5ac27e40f3e880.PNG

  http://www.part.lt/perziura/2854669ba4565f4a6f78711ee19b88ca473.PNG

  Hi Artur,

  We understand that you need to adjust the brightness of your laptop HP 2000.

  Here's what you can do to get this resolved:

  Hold down the F2 key to decrease brightness screen Fn key and press the F3 key to increase brightness.

  If it doesn't, you can contact HP directly to HP customer care.

  Kind regards.

• Please help fix the Decode function

  DECODE (p_resp_key,'|) "' AP" ' |', LINT_LOGI_STG_ITEM_DETAILS_PKG. Description of the AS GET_AP_ITEM_CATEGORY_DTL (ol.inventory_item_id), ldmf_istore_order_pkg.get_wwdb_prod_description (ol.inventory_item_id))
  
  I'm getting errors during execution analysis. I believe that something is incorrect in Decode statement. I call this statement of Decopde in the package. Help, please.
  
  Concerning
  M

  I think I've found the error:

  p_resp_key is a parameter to your home...

  If it could work.

   := 'select ... DECODE('''||p_resp_key||''',''AP'',LINT_LOGI_STG_ITEM_DETAILS_PKG.GET_AP_ITEM_CATEGORY_DTL(ol.inventory_item_id),ldmf_istore_order_pkg.get_wwdb_prod_description(ol.inventory_item_id)) AS description ...'
  

  I still very strongly suggest to do not to use the dynamic version of this code. You have a couple of potential Sql Injection issues in there and it will be better if its not done dynamically.

  Published by: W. Sven on September 11, 2009 14:15

  Published by: W. Sven on September 11, 2009 14:17

• bought LR 6 upgrade, requires the 64-bit system, I have 32 with x 64 based processor. Any solution?

  I bought LR 6 upgrade (have LR 5), did not know that he needs a 64 bit system.  Is there a solution to this?  Apart from a new computer?

  Unfortunately not.

  You need a 64-bit computer.

• How can I fix the error 87. I have no installer and literally no file, adobe on my PC, but I still get the error code. If adobe wants either too much of a hassle and I cannot ffix it I'll just find another supplier for these programs.

  As stated above, I have no installers or the files on my pc, but the installer CC adobe still gives me 87 error code

  Thanks too you two to try to drive me to the bottom of the right way to difficulty it but none of you are guys suggestions worked, I had to completely reboot my computer in admin mode suppression of swathes of my hard drive, even the parts that were not affects adobe cc just so that I can make it work

• Help fix the glare of the Sun

  I use Photoshop Elements 9.0 on Windows 7 Home Prem 64 bit and have spent hours trying to figure out how to remove or improve reflections of a photo. I tried every tutorial I found (for the most part on eHow) and may not relate to their procedures, because I can't find items in the menus they consult or obtain results as they suggest. (http://www.ehow.com/how_7341725_remove-photographs-using-photoshop-elements.html) when I try to select and extract the glare as a new layer, I can never see it, the corrections that I do are all the original background image. I followed the instructions implicitly when I try to brush a selected sample of the part of the image that I want to correct, he just smears other parts of the photo on it instead of what I selected. It is not a large photo of high resolution, it's just a friend took with a cell phone camera and I wanted to practice on it to eliminate glare.  http://dl.dropbox.com/u/18225693/klausb.jpg. Certainly, there is a good tutorial somewere, I found not just not it.

  Please click on the link to the screenshot.

  Reduce the size of the cursor with the keys of support on the keyboard next to letter increase [decrease] P.

  http://www.pixentral.com/show.php?picture=19yexX4ccKYRDFU0JAHJTpDsDUFSu1