Help for Kodak camera driver download
Original title: Driver Download
I lost my software for my Kodak digtal camera and it was uninstalled quite some time. My computer does not recognize my camera or a memory card. I went to download the driver, and what I got was a "pilot Device Manager." I uninstalled. Keep the failure of my USB ports. Where should I go and what I need to do to get my USB ports, memory card and compatible camera? Thnx.
The chipset installation utility mother advice gets USB will get to youre
chipset boards, he withdraws (intel, amd, etc.) ... Install first.
Then go to the kodak website, download the drivers/software for your camera
Usually, for any product material, once the material & the cd get set
Tablet of retailers, the original cd software/drivers are outdated, these items updated
All the time.
Tags: Windows
Similar Questions
-
How to change the Windows settings to allow for the camera driver must be installed
My laptop doesn't recognize my digital camera. The correct software is responsible for the camera. An error message indicates that Windows will not allow access to the driver. How can I change the settings in Windows so that the driver for the camera is recognized?
Help please!
Hi Brian,.
1. are you able to install all device drivers?
2. which antivirus program is installed on your computer?
3. don't you make changes to the computer before the show?The question seems to be as a program is blocked.
I suggest you perform the clean boot and check if the problem persists. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.
I hope this helps.
-
Original title: printer problems
I recently bought a new Kodak 310 printer. I can't print. Tried to fix the problems, but it still doesn't work. Any suggestions?
I recently bought a new Kodak 310 printer. I can't print. Tried to fix the problems, but it still doesn't work. Any suggestions?
If you are referring to the Kodak C310 printer:
Download and install the drivers for Kodak C310:
http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/trueInstallation instructions
- Check that your computer meets the system requirements.
NOTE: WINDOWS XP 64 - bit Operating System only is not supported. - Disconnect your all-in-one printer from your computer.
- Make sure you have connected to the computer using the administrator account.
- Close all programs.
- Download the software on your computer.
- Double-click the *.exe file, and then follow the on-screen instructions.
- Once the installation is completed, connect your all-in one to your computer.
- Select Start > programs > Kodak > Kodak AiO Home Center.
- Check that your computer meets the system requirements.
-
For the NVIDIA driver download problem
When trying to download the latest version from NVIDIA, it says
Error during execution". ' / / setup.exe. Access is denied
Hello
Make sure that you are logged as ADMINISTRATOR to update the drivers.
Check with Nvidia Support and forums.
NVIDIA forums/communities
http://www.nvidia.com/object/nvidia_zones.html-NVIDIA drivers
http://www.nvidia.com/download/index.aspx?lang=en-usNVIDIA - Support
http://www.nvidia.com/page/support.html-------------------------------------------------------------
References to Vista also apply to Windows 7.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods
above it is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to for many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Need help for the device driver - device Base system
Model - 6930p
32-bit Windows 7 Home Premium
Hardware ID:
PCI VEN_1180 & DEV_0843 & SUBSYS_30DC103C & REV_14
PCI VEN_1180 & DEV_0843 & SUBSYS_30DC103C
PCI VEN_1180 & DEV_0843 & CC_088000
PCI VEN_1180 & DEV_0843 & CC_0880Thank you
John
Hi John,.
Download and install the driver from the link card reader.
Kind regards
DP - K
-
SIS D7496A number HP Pavilion 4509 model 530 need help for upgrade hard drive
I have a desktop HP Pavilion 4509. and have a hard drive 3,5 "(4,3 Go)." I want to replace or upgrade to 20 GB / 40 GB hard drive. is this possible? I also upgraded the memory (sdram) also. If possible, can someone tell me how I update my hard drive? should what brand I use?
Thank you
Dilip Kumar
Dilip KumarPC will have 40 GB of HDD (any brand). Make sure that the drive is PATA (parallel). SATA (serial) will not work.
-
HP Pavilion 15-p201TU: help for the driver download (windows 7 32 bit/64)
Dear
Monsieur le President/medamI am computer purchase hp laptop pavilion 15-201tu in a 8.1 only support window
but my working software only support Windows 7so pls giveme window 7 driver (32/64 bit)
pls send driver download link for Windows 7
Hello:
Website is down at the moment.
You should be able to use the W7 x 64 drivers and the software of the 15 t-p000 on your model except the BIOS and firmware files.
HP does not support your model of 32-bit operating systems.
-
Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?
The duplicate thread information:
Cannot connect Epson scanner/Nikon camera to printer!
Hi Carolyn has Culp,
Thanks for asking this question to Microsoft Community!
I understand that your scanner and Nikon camera is not getting recognized in windows vista.He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.1. have you made changes on the computer before this problem?
2. What is the brand and model of the scanner?
3. are you an error message or error code?
4. is that your other USB devices work?I would suggest trying the following methods and check if it helps.Method 1:
Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.Method 2:Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-usMethod 3:Remove and reinstall all USB controllers.To remove and reinstall all USB controllers, follow these steps:
(a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the Hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
Method 4:To update the chipset drivers and check if it helps.Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
Reference:The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problemsIt will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.
-
Camera driver for Windows 7 (64 bit) notebook VGN-SZ780
My laptop came with Vista and after that I installed Windows 7 (64-bit), the camera does not work. Where can I find the driver for the camera (it seems that it is Ricoh) to Windows 7 (64-bit). The Sony Web site doesn't have. Help, please!
Hello
The WebCam Companion Software for Windows 7 is available for download. You can download the same link below:
http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=VGNSZ780&upd_id=5051&os_group_id=6
You can install the drivers of webcam in Windows 7 operating system. Try the procedure described at the link below:
https://us.en.KB.Sony.com/app/answers/detail/A_ID/32582
If my post answered your question, please mark it as an "accepted Solution".
-
Download PDF for my camera manual cannot be found after downloading
I downloaded twice a Nikon manual for my camera. This is a PDF document. It is not in the downloads, documents or no share elsewhere that I know where to look - can you help me?
You use Firefox 4 and I've not used it before, but maybe I can help you.
Try to use the XP search to search for the file. Click Start and then click on search and search for files and folders.
Name of the file to search for, put in *.pdf and start the search.
It will search all PDF files on your system. It may take awhile, but if you downloaded the file, it must be found.
I don't know if Firefox 4 has the same function, but look in the Tools menu (or its equivalent for Firefox 4) for a way to display the downloads window.
This will contain a list of what you have downloaded. If you are looking for the manual of the device in the list, right-click on it and select open folder - maybe it's different in Firefox 4.
I hope this helps.
Stan
-
I have windows xp 32-bit 11gigs of free space on the hard drive.kodak said that the software is not installed properly.they tried repeatedly by SANDRINE remote access
Hi georgeey,
Please report the problem to the Microsoft Community Forum.If we understand it, you cannot scan with the kodak camera.
We will help you solve the problem.1. What is the model number?2. have you made changes on the computer recently?3. do you get an error message when you try to scan?It is possible that Kodak may have an older version of its software that works.Method 1:Try to install the software to clean boot, and then try to scanReference:From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Note: Reset the computer to start as usual after a repair.Method 2:If this does not help, please uninstall and reinstall the device driver.a. go to control panel and select the device of scaningb. right-click on the device and select Uninstall tab drivers.to reinstall the driver to see the link given above manufacturer Web site.Hope above links help you. If the problem persists, you can write back to us and we will be happy to help you more -
How can I re install a Driver for my cam ASUS USB 2. 01.3 M UVC in Vista?
Dear all, please let me know how can I re install a Driver for my cam ASUS USB 2. 01.3 M UVC, using Windows VISTA
* original title - re install usb 2.01.3M UVC for asus computer webcam *.
Hi mounthalakongvongsa,
What is the number of model of your laptop or desktop?
You can provide the model number on the site below and search for the drivers.
http://support.ASUS.com/download/download.aspx?SLanguage=en-us
-
Hello
Sorry, but I'm really frustrated trying to talk to Microsoft/Toshiba/Nikon. PnP on vista for nikon camera doesn't work simply in PTP mode (in camera). I tried to restart, USB drivers uninstall and reload, reinstall all the nikon last edition software, java/sp2/firmware update on nikon and removing the INFCACHE.1 on vista, but nothing works. I don't know what I can do to make it work. I would appreciate if someone can help me on this.
Here is the description of the problem
Description
Windows encountered a problem installing the device drivers for your NIKON D70 DSC
Signature of the problem
Problem event name: PnPDriverInstallError
Architecture: x 86
Win32 error: E0000219
The INF name: nkctlptp.inf
Driver Package hash: 6994238a841a4009328cd36fb0be54c40686c5ed
DDInstall section name: NO_DRV
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Files helping to describe the problem
DMI626B.tmp.log.XML
oem84.inf
Description
Windows encountered a problem installing the device drivers for your NIKON D200 DSCSignature of the problem
Problem event name: PnPDriverInstallError
Architecture: x 86
Win32 error: E0000219
The INF name: nkctlptp.inf
Driver Package hash: 6994238a841a4009328cd36fb0be54c40686c5ed
DDInstall section name: NO_DRV
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033Files helping to describe the problem
DMIF1E3.tmp.log.XML
oem84.infHi Photog09,
Remove the upper filter and see if the problem is resolved. Otherwise, you can run the Microsoft Fixit who will make changes in the registry automatically. Open the link below and click it on the Fixit button.
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
Bindu S -Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Need to download drivers for my camera digital fuji @xia SLIM SHOT
Original title:<@xia slim="" shot="" fuji="" digital="" camera="">
I'm todownload a driver for this camera its @xia called SLIM SHOT... his digital camera
Hello
1. what happens when you connect the device to the computer?
2. do you get an error message? If Yes, what is the exact error message?
3. have you received a disc with the camera?
Connect the device to a different USB port and allow windows to automatically download and install the drivers.
In addition, contact Fuji technical support and check with them if they have drivers available for the camera.
@xia> -
Where to find driver for digital camera Panasonic Lumix DMC-FX33 8.1MP
How to get a driver for my camera to be recognized by my computer?
http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Panasonic%20Lumix%20DMC-FX33%208.1MP%20Digital%20Camera&v=Panasonic&uid=&l=en-US&pf=7&pi=4&c=Cameras%20%26%20Photo&sc=Digital%20Cameras&os=64-bit seems to imply it doesn't need one. Windows should detect I guess?
If it does not detect, what operating system are you using (W7 starter/Basic/Home Premium etc., 32-bit or 64-bit)
What have you tried to 'install' the camera? Are there specific instructions in the user guide (if you have not, take a look at the Panasonic support for your region site, they are generally available here as a PDF download)
Maybe you are looking for
-
Which Intel processor I can go to? Also, I added a second hard drive, how to remove the fron of recovery first hd?
-
How to upgrade my grapics gameing and buisness
I have vista home premium
-
Error codes & corrupt file problems
Hi, can you please help. I have problems with the installation of the updates and software on my laptop: -. updated Windows, I get the error code 80200053,Microsoft Security Essentials updates, I get the error code 0 x 80240022 (it is a new installat
-
I want to put an ssd instead of a dvd on my laptop drive but does not fit the encrassante
Is there an adapter to fix it is too late for the dvd to replace its all in several room now it of weird cable are like leaves
-
I used CC for a year now, updated regularly and have never had this problem when rendering. This message appears:Movie compilation error.Export error.Error rendering completion.Writing with the exporter: MPEG overviewWriting to the file: \\?\D:zAdobe