Help for resettlement after that computer has been deleted.

Similar Questions

• instructions on how to get your photos back after your computer has been deleted and the

  my computer has been deleted and my photos from my photo file. so I wonder how I can get all my photos if I can at all... my computer was giving me problems and saying that the hard drive has been mess up so I went back and restored my programs and it restored everything but my photos and other files, that I would just get my photos.

  How exactly do you run restore?

  If you have used a disk recovery or a recovery Partition...
  to reinstall your system as it was when you first
  bought it... your personal files may be missing
  unless you do backups on an external support.

  There are programs of software designed to recover the
  deleted files. The following freeware is an example...
  a Google search will find more.

  If there is no file on your hard drive with
  not been crushed... There is a little chance that
  You may be able to recover some of them.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Recuva - file recovery
  http://www.Recuva.com/

  Introduction of Recuva (tutorials)
  http://docs.Piriform.com/Recuva/introducing-Recuva

  The following article can be also worth a visit:

  How to recover files deleted with free software
  http://Lifehacker.com/393084/how-to-recover-deleted-files-with-free-software

  Good luck.

• After that computer has been idle, error installation about DriverCure

  Get the message box on my screen after that computer remained inactive during the night of DriverCure saying Setup error. I was not able to locate to uninstall / reinstall. I don't remember always to help or even try to load this product. How can I get rid of this?

  If you go to start and type msconfig. Then go to the tab startup look to see if you see a program called DriverCure here. If so, then uncheck the box and restart your computer to see if you get the Setup error.

  Before going any further, do a manual system restore point.
  Right-click on the computer icon in the desktop, then choose Properties
  In the left pane, click System Protection
  Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  In the System Protection dialog box, type a description, and then click on create.

  If you find DriverCure, then look at the location and copy the path. It would be something like: HKeyLocalMachine\Software\Microsoft\CurrentVersion\Run
  Then go to start, type regedit. Then highlight the path you have copied, if drivercure present in the key, and then delete it.

  Then reboot and see if you still see the same error install DriverCure.

  Please answer back with an update.

  Sincerely,.

  Marilyn

• I downoladed and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do

  I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do to get loaded and enabled on my computer?

  That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• Windows Media Center could not update Playready after that kb3004394 has been installed.

  Windows Media Center could not update Playready after that kb3004394 has been installed.  I then uninstalled kb3004394 and tried everything I can find on the web for difficulty playready including this procedure

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e

  and this procedure

  http://www.hydrous.net/weblog/2012/08/20/resetting-PlayReady

  Nothing worked and I'm pulling my hair out.  I use WMC with an HDHomeRun and a map of Time Warner cable.  This facility worked well for more than a year before installing this update.  The machine is a Dell XPS 8300 running windows 7 SP1.   I'm unable to watch all channels protected by DRM and I lost all my legally registered content.  It is a disaster and cost me 30 hours and counting.  Anyone have any ideas?

  I don't know your problem, but 3004394 has caused a lot of problems for a lot of people - https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-kb3004394-issues/ace25277-7f65-4486-bc44-c1b106907a18.

  Microsoft have apparently released an update of replacement/deletion for it - https://support.microsoft.com/kb/3024777?wa=wsignin1.0

  But to a few other posts on this forum, it seems to fix everything for everybody. If all goes well it can help you.

  If not, allows to see what MS themselves have to say.

• The standard games on my computer has been deleted and my hard drive went out is there a place I can download the standard games

  original title: games

  The standard games on my computer has been deleted and my hard drive went out is there a place I can download the standard games

  ---------------

• I'm on mac, I mind open it because he says that preferences has been deleted, I reinstalled it twice and it does not

  I'm on mac, I mind open it because he says that preferences has been deleted, I reinstalled it twice and it does not

  Press Command-Option-shift and launch Photoshop. When you see the dialog box to delete the settings file, release the keys, click Yes and I hope that the preferences will be recreated.

  Gene

• Email for my live account xbox has been deleted, how can I change it?

  Dear community,

  My Yahoo email account, which I use for xbox live, has been deleted because of inactivity on the yahoo site. For this reason, I can't sign on the xbox live account when I try to change the e-mail address. Help, please!

  Hello

  Xbox is not supported in the Microsoft Community.

  Try the solutions proposed in this thread:

  http://forums.Xbox.com/xbox_forums/xbox_support/f/12/t/1534318.aspx

  There may be a charge of telephone support (last).

  More: Support technique Xbox http://support.xbox.com/en-US/

  Don

• Xbox 360 will not connect to the Media Center after that PC has been asleep

  My Xbox 360 connects to my Media Center as an Extender initially. When it works, it works very well. However, after my PC has spent time in a suspended state, it is at 75% chance that my Xbox won't be able to connect to the Media Center. Sometimes it will work, but more often it won't.

  Restart my PC will allow the Xbox to connect immediately, but this isn't an ideal solution. I wish I could have my PC of a suspended state wake and correctly connected to the Xbox media extender.

  Hello

  (1) did you make any changes before the show?

  (2) is the specific question when the computer wakes from sleep?

  This problem may occur when the power is suspended in the media extender. I would have you go through the articles that might be useful.

  Method 1: Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Method 2: Windows Media Center Extender: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Reference:

  Set up Windows Media Center on the Xbox 360 (Windows 7)

  http://support.Xbox.com/en-in/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Windows-7

  Let us know if that helps.

• Any help for a phone that had his account deleted and deleted contacts?

  Basically, took my phone out of my Pocket earlier, home screens were completely blank, my phone has lost its contacts and accounts of motoblur has also apparently have been deleted. SIM card works fine, I can always ring numbers and the text, but these numbers are not recognized as my list of contacts have been lost. However, the downloaded applications are always present. Import the contacts from the sim card does not work, even though she says she did.

  Any help?

  FOR INFO. MOTOBLUR also seems to store information to focus on the provision of your home screen as well. I had to Exchange my first Cliq due to the failure of LCD and when I got the new phone and entered my motoblur account inside loaded with all my contacts and the widgets and houses screens exactly as I had them on the first phone. You will need to re-download applications 3rd party well so the links on the screens of homes for those who will be gone.

• Internet E8 freezes, usually after the computer has been idle for several hours or overnight

  When I run internet explorer fix - it tool, it gives me an error message - "has encountered a problem and cannot continue." What is one to do?

  Hello

  • What fixit did you run?

  If your Internet connection is very slow, you can follow this link.

  http://support.Microsoft.com/kb/926449

  You can also try this link.

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Note:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• For some reason, my computer has been commissioned in protection mode and will only allow me to connect in that with networking...

  It of frustrating and does not allow me to do much... How can I fix, why used it start up normally?

  I tried to restart, trouble shooting and download assistance programs that I bought... but I turn off the computer and reboot and it does the same thing and downloads never what I installed.

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard - follow UAC prompt.
  4. The System Configuration utility opens
  5. Make sure the Normal startup is selected
  6. then click on the STARTUP tab at the top
  7. Make sure that the startup is disabled
  8. Apply - OK - then follow restart guests

  ________________________________________________________________

  If above does not try a Startup Repair:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• How to reconnect my remote site after that Dreamweaver has been charged on my computer?

  Once a system restore and Dream Weaver reloading I lost connection to my remote. All files the and remote are in place but the updated not validated at the remote site files? I don't want to reload all Web pages, because they are all on the server. Any way to re-login again? I tried to use manage sites to establish connections, but it does not work.

  
  

  Seems to me that you can download in the wrong place, or you can have a case mismatch in the name of the file.

  Make sure you have the root directory defined correctly in your FTP credentials and that you do not have this directory appear anywhere in your local files.

  For example, if the root directory of your site is "public_html" it must show in the field of root directory / Directory FTP host your site and NOT in the files of the window list. If it appeared also in your files window, you would be able to find your new pages at www.yoursite.com/public_html, which is obviously not wanted.

  Another question may miss the root of the server entirely, in this case, your files would be downloading to a top directory of your site on your server and totally inaccessible to the world online.

  A mismatch could take effect if you have index.html on the server, but the Index.html or INDEX. HTML on the spot. On Mac and Windows, all 3 of these file names are the same. They are not case-sensitive, but on the server, these are all 3 separate files. If this is the case of the navigation to the INDEX. HTML will give you the correct page online because it does not replace index.html.

  For this reason, it is always best to use lowercase names only when you are working online.

• How to regain possession of the file on my Vista PC after that it has been hijacked by my Windows laptop, 8...

  I plugged my external drive to backup on a laptop Windows8 and Windows8 cell phone apparently took possession of the file that I accessed from the external drive.  Now I can't access this file from my Vista PC.  He tells me that I don't have permission to access the file, even though my account is administrative and the file was written from Vista computer!

  Help!  These are image files and as a photographer, I need to access the files on the hard drive on my Vista computer!

  Type in the start - Help and Support

  appropriators

  I installed a new version of Windows and now I can't open a file.

  This problem may occur because some of your user account information has changed, even though your user name and password have not changed. You may be able to solve the problem by taking possession of the record.

  To take ownership of a folder

  1. Right click on the folder that you want to take control and then click Properties.

  2. Click the Security tab, click Advanced, and then click the owner tab.

  3. Click on change.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Click on the name of the person you want to give to the property.

  5. If you want that person to be the owner of the files and subfolders in this folder, select the Replace owner of subcontainers and objects to check.

  6. Click OK.

  What help does not say, it is after taking possession, that you actually need to give yourself permissions to access the files. Use the permissions , rather than the owner above tab tab.

• Webcam works only with Windows 7 after the computer has been cleaned.

  original title: Webcams

  I had to get my computer cleaned. After it was cleaned the windows installed person 7. I used Vista. I have a webcam built into my computer. I used to be able to use it to take photos and videos. Now, I can't. When I search for the webcam all I can find general information about it and its properties. Anyone know how I can get my webcam back up the way I used too?

  Hello

  Each manufacturer of system or camera maker provides their own software to control the camera so
  You should check with their support, their books online and ask in their forums (if any).

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.