Help function Win32 API GetPrinter

Similar Questions

• Error of the 2 Win32 APIs, impossible to find ShellExecuteExW form AgWorkspace.shellExecute

  I get this error: error in the 2 Win32 APIs, impossible to find ShellExecuteExW form AgWorkspace.shellExecute

  When you run my gout, that worked a few days ago.

  Have been install and reboot a new install of WIN 10 and LR, PS CC
  Hope someone can help me.

  JohnRellis,

  interesting.  When you run DNG... 11 seems to be my limit... even in LR, CC PS updated to the current.

  I just ran "Processor of Image" in PS CC... and it seems that it can last forever (done properly).
  BUT, Yes... the problem... and time killer is, you must import it in (I do a SYNC)... and then manually regroup with the DSP on the top.

  Wish Adobe would update image processor to... Auto Import and group with the DSP on the top of the stack.

  Thank you John for all the help.

  Ross

• Export results in error of 2 Win32 API

  Hello

  I try to export an image to print commercially, and I get an error: "an internal error has occurred: error Win32 API 2 (" the system cannot find the file specified."). ...

  "Tried to search troubleshooting for this error - ' nada."

  Suggestions? Thank you in advance...

  John L

  Several replies already posted on the forum. I don't know how to thank each precisely, but I hope that my gratitude will make its way into their accounts of karma...

• Failed to export.  Receive a notice of error 2 Win32 API whenever I try to export.  Says it can't locate the files.  Huh?

  Ok

  I get a system error whenever I try to export. "An internal error has occurred: error in Win32 API 2 (the system cannot find the specified file) when the Shell Execute ExW of the AgWorkspace.shellExecute." "  Scary sounds.  In essence, LR 5.6 has just crashed and burned.  Anyone out there have a clue?

  Thank you

  Russell Abraham

  [email protected]

  I use Windows 64, but I get the 2 Win32 API error when exporting?

• error message win32 API error2 when calling ShellExecuteErW from AgWorkspace.shellExecute

  After the export command I get the message: internal error: win32 API call ShellExecuteErW of AgWorkspace.shellExecute error2. System is only export Thumnails.

  The system is windows8, 64 bit Lightroom 5.2 (latest version)

  At the bottom of the import dialog is a popup marked post processing.  No doubt it is currently empty.  Set it to nothing do and try the export again.

• Adobe Photoshop CS5.1 reinstalled because the help functions gives an error message (7).

  Hello

  When I tried to use the help function Adobe Prhotoshop CS5.1 a pop-up message shows errorcode (7) advise to reinstall the product. So I did, but it did not work. What can I do more? Mind you, the help in bridge function works as it should and the two products are installed at the same time.

  Kind regards

  AAD

  Thanks, I found a few topics on the error. I reinstalled and now it works.

  AAD

• The 193 Win32 API error. Cannot call the C function: private_load_AgCoreTest

  Hi guys,.

  When I try to run Lightroom, I get the following error messages:

  • Win 32 API error 193 ("(erreur inconnue)" ") when you call: load the getCFunction library
  • Cannot call the C function: private_load_AgCoreTest

  So I can't access my library or to make a new library by importing files.

  I run it on a laptop with Windows 10 64-bit, Nvidia GeForce 850 m GTX and a processor Intel Core i7 with 12 GB of RAM and a 500 GB SSD (Samsung 840 EVO). All with the latest drivers.

  I tried already to unninstall and reinstall the program, all my packages of Visual C++ and the dll. I also already checked my permissions for the folder from catalog and granted full access. I also tried to run Lightroom as administrator.

  None of these solved the problem.

  What should I do?

  According to the notes, they followed the instructions here to fix the problem: error: "unable to start correctly (0Xc000007b)"

• Help function LabelField

  Hello

  I use many LabelField controls in the project do not wish to repeat the same code & would like help in creating a reusable function.

  Example:

  Import net.rim.blackberry.api.phone.Phone;

  LabelField lfOwner = new LabelField ("owner:" + OwnerInfo.getOwnerName (), DrawStyle.LEFT)
  {
  public void paint (Graphics g)
  {
  g.setColor (Color.DARKGREEN);
  g.setBackgroundColor (Color.WHITE);
  Super.Paint (g);
  }
  };

  LabelField lfOwnerInfo = new LabelField ("owner:" + OwnerInfo.getOwnerInformation (), DrawStyle.LEFT)
  {
  public void paint (Graphics g)
  {
  g.setColor (Color.DARKGREEN);
  g.setBackgroundColor (Color.WHITE);
  Super.Paint (g);
  }
  };

  As you can see, the two are LabelFields with graphics by placing of the same color. It makes no repeat the code point and would be better to be able to pass information to a function to set the color for label... Creating a class using a variable public to access the info above which is converted into a string before being passed to the LabelField control. Each LabelField will be in the same format:

  LabelName (sText + ":" + sText2, DrawStyle.LEFT);

  or

  MyLabelName ("owner", PhonesOwner(), DrawStyle.LEFT);

  producing a

  Owner: [name of the owner of some here]

  Following label:

  The owner Info: [info from the owner here]

  and so on

  That's what I wrote, but doesn't seem to work:

  ' Public Sub SetGreenLabel (field field, String sLabelText, String sFunctionName)
  {
  field = new LabelField (sLabelText + ":" + sFunctionName, DrawStyle.LEFT)
  {
  public void paint (Graphics g)
  {
  g.setColor (Color.DARKGREEN);
  g.setBackgroundColor (Color.WHITE);
  Super.Paint (g);
  }
  };
  };

  May extend to pass the ForeColor as parameter

  ' Public Sub SetLabelColour (String sLabelText, String sFunctionName, PlayStations color field, field)
  {
  field = new LabelField (sLabelText + ":" + sFunctionName, DrawStyle.LEFT)
  {
  public void paint (Graphics g)
  {
  g.setColor (cColour);
  g.setBackgroundColor (Color.WHITE);
  Super.Paint (g);
  }
  };
  };

  Perhaps an overload of the function as follows:

  SetLabelColour (String sText, String sText2)

  SetLabelColour (String sText2, String sText, color cForeColour)

  SetLabelColour (String sText2, String sText, cBackColour color, color cForeColour)

  My public variable

  MyClass mc = new MyClass();

  Label

  LabelField lf1;

  MC. SetLabelColour (lf1, 'Owner', PhonesOwner());

  Any ideas on how to write the correct functions?

  Thanks in advance

  Sure. Here is a more elaborate version of the idea of the subclass that has multiple constructors, commented to indicate what is happening. I have also set the colours.

  public class ColorLabelField extend LabelField {    /** Foreground color */    private int fg;
  
      /** Background color */    private int bg;
  
      /**     * Construct a ColorLabelField with empty text, default     * colors of dark green foreround and white background,     * and default style as determined by LabelField.     */    public ColorLabelField() {        this("", Color.DARKGREEN, Color.WHITE);    }
  
      /**     * Construct a ColorLabelField with indicated initial text,     * foreground and background colors, and default style.     * @param text the initial text     * @param fg the foreground color for the text     * @param bg the background color for the text     */    public ColorLabelField(String text, int fg, int bg) {        super(text);        this.fg = fg;        this.bg = bg;    }
  
      /**     * Construct a ColorLabelField with indicated initial text,     * foreground and background colors, and style.     * @param text the initial text     * @param fg the foreground color for the text     * @param bg the background color for the text     * @param style the style for the field     */    public ColorLabelField(String text, int fg, int bg, long style) {        super(text, style);        this.fg = fg;        this.bg = bg;    }
  
      /* No Javadoc comment. Just because. :) */    public void paint(Graphics g) {
          g.setColor(fg);
          g.setBackgroundColor(bg);
          super.paint(g);
      }
  }
  

  If you wish, you can add accessor functions to set the foreground and background colors after the ColorLabelField was built. As written, once you create them, the colors are immutable. (As far as the style of any field bits are immutable). If you add these accessor functions, you should consider if disabled then automatically the field when colors are changed or if it must remain until the client code to invalidate after everything he's done.

• Need help with the API getJSON

  Hello

  I am trying to build a personal portfolio, and I try to use the API of Behance. I am VERY new to all this so any help would be greatly appreciated. So far I understand how to get my projects, but I want to be able to click on each one and dive more deeply to see more screenshots. Essentially, it would work as the Behance when you click on a project to users.

  Here is a link to my files https://DL.dropboxusercontent.com/u/9159616/adamperlis.zip

  See the code in compositionReady. Maybe you guys can help me understand what I am doing wrong.

  
  Thanks a lot for your help!

  Adam

  Dear Adam

  I did research too for undrestanding how function each() work and finally I figured out and did a sample with mover slide and I think it will load one of your projects page and after clicking on your project, it will show a photo of your project and I'm still working on it to see how I can do as a slideshow

  Here is the link to the project and I hope you like: http://www.mediafire.com/download.php?g5da3axbcbwikz2

  Zaxist

• Need help on IOM API

  Hi all
  
  Have we not all API IOM to validate the challenge questions and challenge responses specifically?
  
  I was trying to restore the password functionality using the API of the IOM resetForgottenPassword(). But, for the first time it has been reset the password perfectly and then from the 2nd time... it gives an error message that is mentioned below.
  
  ERROR, April 13, 2010 06:16:55, 982, [XELLERATE. SERVER], class/method: tcUSR/changePasswordForSelf error: password cannot be changed.
  ERROR, April 13, 2010 06:16:55, 984, [XELLERATE. SERVER], class/method: tcUnauthenticatedOperationsBean/resetForgottenPassword some problems: error occurred while resetting the password.
  ERROR, April 13, 2010 06:16:55, 984, [XELLERATE. SERVER], class/method: tcUnauthenticatedOperationsBean/resetForgottenPassword some problems: error occurred while resetting the password.
  Thor.API.Exceptions.tcAPIException: An error has occurred just by resetting the password.
  at com.thortech.xl.ejb.beansimpl.tcUnauthenticatedOperationsBean.resetForgottenPassword (unknown Source)
  at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession.resetForgottenPassword (unknown Source)
  at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl.resetForgottenPassword(tcUnauthenticatedOperationsSession_j7uqe_EOImpl.java:77)
  at com.thortech.xl.ejb.beans.tcUnauthenticatedOperationsSession_j7uqe_EOImpl_WLSkel.invoke (unknown Source)
  at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
  
  Can someone help me please on the thing. If not, please suggest no work around for this.
  
  Thanks in advance.
  
  Siva NAKI.

  Here are the API under tcUserOperationsIntf:

  compareChallengeValuesForSelf
  Boolean compareChallengeValuesForSelf (java.util.Map phQuestionAnswer)
  throws Thor.API.Exceptions.tcNumberOfChallengesMismatchException,
  Thor.API.Exceptions.tcAPIException,
  tcAPIExceptionCompares questions and answers entered by the user against those stored in the database

  Parameters:
  phQuestionAnswer - a map of questions / answers for the current of the connected user.
  Returns:
  true if all the answers are correct to the appropriate questions
  Throws:
  tcNumberOfChallengesMismatchException
  tcAPIException

  You must post as a user, so you will need authentication by private key code in your adapter for this specific user during the validation of the challenge questions.

  -Kevin

• How to implement a callback to the help function call library function node in LabView?

  I try to call a fuction from a SDK.dll library by using the node call library feature. The SDK has been provided to

  me and I don't have the source code, just the .dll and .h files.

  The SdkSetPropertyEventHandler function has a function of recall as one of its parameters. How to apply the

  callback using the NSI node? I'm a good programmer LabView but this is my first time using the library to call

  Function node. I read all the info I can find on the web site of NOR and the discussion Forum, but can not understand

  This one out. I'm using LabView 8.6.

  The deacribes SDK.h function as:

  Function: SdkSetPropertyEventHandler

  (SdkSetPropertyEventHandler) SdkError SDKAPI
  SdkCameraRef inCameraRef,
  SdkPropertyEvent inEvnet,
  SdkPropertyEventHandler inPropertyEventHandler,
  SdkVoid * context);

  //
  Description:
  Registers a callback function to receive the status
  change the notification events for the States of property on a camera.
  //
  Parameters:
  In: inCameraRef - designate the object camera.
  inEvent - designated one or all the events will be completed.
  inPropertyEventHandler - designate the pointer to the callback
  function to receive the camera property-related events.
  inContext - designated application information must be passed
  way to the callback function. All the data necessary to
  your application can be passed.
  Output: no
  //
  Returns: A sdk errors.
  -----------------------------------------------------------------------------*/

  A separate header called SDKTypes.h file contains the following data:

  typedef SdkUInt32 SdkPropertyEvent;
  typedef SdkUInt32 SdkPropertyID;
  typedef void SdkVoid;

  typedef struct __SdkObject * SdkBaseRef;
  typedef SdkBaseRef SdkCameraRef;

  /*-----------------------------------------------------------------------------
  SdkPropertyEventHandler
  -----------------------------------------------------------------------------*/
  typedef SdkError (SDKCALLBACK * SdkPropertyEventHandler))
  SdkPropertyEvent inEvent,
  SdkPropertyID inPropertyID,
  SdkUInt32 inParam,
  SdkVoid * context);

  Thanks for your help.
  Alejandro

  Andrew_E wrote:

  Hi Rolfk,

  You are absolutely right. This article describes what you were talking about? I'm just trying to get as much information as possible on this thread if the solution is easier to find for the future. Thank you.

  Yes, but I find the idea of using .net to call a LabVIEW VI as callback function C a bit as using a roll of Steam ironing your pants. Why do it? Well the steamroller has extra security guards that make it less likely that you'll break your pants in the process, but it's not elegant IMHO.

  Write a C DLL that translates between a C callback and a user event LabVIEW using the PostLVUserEvent() of the interface of the kernel to run LabVIEW function seems so eleganter for me. Yes, it's a bit of programming in C, but good!

  Rolf Kalbermatter

• HELP function - new VI doesn't seem to work in built Application

  My Application is designed to coordinate several separate test (16) of control stations. Test stations can operate independently. I have a Test Manager application that starts the execution independently Test Runner live when the user has selected a test to be performed and the conditions to run with. There may be 0 to 16 Test Runner screws running at any given time. Each Test Runner VI uses the same model code of Test Runner.VI but is given a unique name based on a randomly generated GUID. I use a sequence of the function again, VI, VI. FP. Open and VI. Run VI to create the VI based on the template, give it a unique name and then launch it to run independently. Fragment JPG see attached.

  This design works perfectly well when it is used in the LabView 2010 development environment. But it does not work when I build the Test Manager as an EXE application. There is no errors generated, but the new VI is not launched, and I think that one of the functions of the sequence never returns. I don't know if the new VI is created or not.

  Does anyone know how to change this option so that the screws news can be created, unique, named and launched, it will work properly, regardless of if the creation VI runs either development (for debugging) or as a built application?

  Because of the sequence of the new VI, VI. FP. Open and VI. Pass the VI when used in a built application? Is there another method that will strive to meet this need?

  Is there a function in LabView that will launch an exe as WinExec done? Maybe I can use it.

  Thank you VERY MUCH for any advice.

  'New VI' is scripting.  It is blue. Scripting is explicitly not accessible at run time.

  what you want is 'Open VI référence' on a VI that is configured for the execution of reentry, with appropriate options defined in the properties of the VI and wired at the entrance to the REF VI open node Options (you want to 0x08 to returning with placeholders for data).  You can use a .lives, but this is not what they are for.

  Take the time to read the help file for reference VI open, it'll be worth it.

  other comments:

  Use the method fp.open, not property.

  "Auto has Ref" = true acts more like a standard VI call: LV will automatically close the ref when the called VI is idle.

• Problem setting up base appeal of the DLL (win32 API?) for the control of coherent laser Verdi-G

  I'm trying to set up a call to the DLL to control a coherent laser Verdi-G.

  I can't know the right way to set up calls. In the attached Demo.cpp, there is a function "RunTests". It's kinda my final goal. Functions send some commands to query the device. I'm going to need to send commands like this (along with several others, some of which take arguments... but I think I can understand that on mine)

  My problem is getting started. I can't even talk about the device. I tried a few different ways to set up the call to the DLL, but they have always will plant the computer. I don't know if I am missing a few parts such as the initialization of a method to speak via USB or other parts.

  I added my own .vi tries as well as some of the .c, the .cpp & the .h files associated provided with laser control software. I may have missed the relevant records; I'm happy to add them if someone sees a necessary file / referenced.

  Any help would be appreciated.

  Thanks for your time!

  Turns out I missed the included .vi which belongs to install them the package. I was looking directly on their CD.

  I would mark this closed if I saw a button for this?

• The Win32 Api hook

  I did a scan Trend Micro Housecall, he said: I have 1 problem he can't fix: Hooked_Service_API, Service Api: ZwTerminateProcess

  Image path: C:\Windows\System32\Drivers\SPINProc.sys

  Manager of origin: Service 0x805c866a CurrentHandler 0xeee9f416 number 0 x 101

  ModuleName Psinproc.sys

  SDTType 0x0

  From what I know about it, that it is spyware or viruses, that modifies the behavior of the pc during the game, which is exactly the problem that I had lately, but I can't find a solution to remove.  I ran several other scans, they found, but all say that they can not fix it.

  I have windows xp pro 32 bit on my pc

  Hello
  Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It provides detailed instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Help using office-API - getStatsOfResourcesCSV with Powershell Invoke-RestMethod

  Hi all

  I want to extract metrics data vRops in CSV, I found getStatsOfResourcesCSV but can not do work... the file comes out in JSON or XML, but never in CSV.

  The documentation isn't really clear to me... anyone know how I can CALL him to display the data in CSV?

  Part of the script.

  $ContentType = application/json"; charset = utf-8 ".

  $header = new-Object "System.Collections.Generic.Dictionary [[String] [String]].

  JSON output #For

  $header. Add ("accept", "application/json")

  #For XML output

  #$header. Add ("Accept", "application/xml '")

  Call-RestMethod-method GET - uri " " https://192.168.0.3/suite-api/api/resources/stats?resourceId=UUID1 & resourceId = UUID2 & statKey = cpu | costop_summation & statKey = cpu | usage_average & statKey = mem | statKey & request = mem: usage_average & statKey = cpu | costopPct & rollUpType = AVG & intervalType = DAYS ' - Credential $cred - ContentType $ContentType - Headers $header - OutFile 'Output.csv' '.

  Hello

  A blog around vRops API in general vRops API consumed with Powershell - Michael Ryom

  I haven't played with getStatsOfResourcesCSV and have not had the time to do so - but in general in vRops API, you must specify the format - if you look at my blog you can see that I used '& format = csv' out data in csv instead of xml (I belive you can also do it this way to json).

  Hope this helps