Help! Girl used wrong disk to fix my Dell b120!

Similar Questions

• Using recovery disks (windows 8.1) to re-install on a replacement hard drive

  Hello, I just ordered a DELL Inspiron 3000 desktop computer. I read that DELL power supply is no longer reinstallation DVD.  What happens when (if) the hard drive in the new PC goes wrong? Could I then form a new hard drive in my machine and use recovery disks (which I'd as soon as the PC happens with DELL to the top and recovery) to reinstall everything on this new hard drive? That's how would this work?

  Thank you

  Dominocat

  It's a ridiculous bunch of B.S. should not have to ask a recovery media for a system they bought which comes with the ability to make its own recovery media. I used the USB Flash method and the DVD I did when I bought the PC, and none of them works. Never do an option to install Windows. Refresh PC and PC Reset are just as useless when told your recovery media is not "valid". If I had my Windows product key that I have just to run Windows Setup, enter the key and be on my way.

  I tried to use the application form to request the media with Dell, but because I am out of warranty web page just a loop and does not always actually apply. It seems that I might have to call Dell technical support and pay by the minute (cell phone), while it is pending. Even the Support email link disappears once the warranty expires. Thank you, Dell. Appreciate the help.

  I think part of the problem is that the PC came with Windows 8 (so then the recovery DVDs were made) and since then I've upgraded to 8.1 making it "invalid". But this does not explain the new recovery USB support flash a few moments I did there are that still does not work for 'Refresh' or 'Reset' to my PC. It indicates that lack of recovery files. Should not have checked everything while bringing the recovery media?

  At this point, I have now downloaded the free version of Reflect and use to clone the old hard drive before he finally died, and I hope it will work. Good luck to all.

• How to format and re - install Windows 7 using recovery disks/Partitions?

  Hello..

  My product-

  HP DV4-5109tx

  Windows 7 (64-bit)

  I have a free space of 78 GBs that I'm not able to use... As when I try to use the "disk management" and right-click on the free space to "format partition" this option has been grayed out... !!

  Please suggest if I can use this space without formatting? (I was suggested for formatting)

  In addition, due to some other issues too I want to format my Windows (and reinstall) IE drive C so that the free space problem can be solved... Also I don't want no data in my other drives to be formatted...

  I have the recovery partition and the recovery disks sent by HP...

  Please help me how I can use them to solve my goal...

  Thank you

  It's simple, as I suggested in my previous post.

  Once you have a drive like the one on the image management window simply click New Simple Volume. Create a new partition called "New Volume". Make a right click on it and the option to format it will appear.  The strips on the 75,38 GB of free space in your image indicates that the selected action will take place on this point in the disk management window. You can change the name for the new volume in Windows Explorer.

• Can I use a disk Windows 7 Home full version and just use the key to version upgrade license?

  Original title: the reconstruction of my PC - Windows 7 issue.

  I will be rebuilding my PC which has Windows 7 Home 64 bit installed.  I did the upgrade from Vista to Windows 7 with a family 3-pack.  Can I use a disk Windows 7 Home full version and just use the key to version upgrade license?  Seems a little ridiculous that I have to install another OS and do the upgrade.  I searched the forums and could not easily find an answer to this question.  Help, please.  Thank you!

  Also note that as you change not the motherboard Windows should not require re-installation and activation.

  J W Stuart: http://www.pagestart.com

• With the help of Workstation 6 disks in ESX 3.5

  Hello

  I read on the displacement of the Workstation to ESX from VMWare KB disks (KB article: 900). I tried to use the vmkfstools - i, but I always found with a wrong format.

  Should what settings I give the vmkfstools to be able to use the disks in ESX 3.5?

  I don't have a license to the converter, or I can buy one.

  Kake says:

  The free version is unable to convert a physical machine directly ESX...

  In fact, it can.  However, you can do a "remote" converted to a physical machine.  You must install the converter on the machine that you want to convert and run it from there, select "local computer", then you're allowed ESX as destination.

• With the help of the utility Disk Recovery HD

  IF I use recovery disk HD utility to repair the hard drive, I lose my files? Should I do a backup first?

  No, you shouldn't lose your files... However:

  YES, you should always have a full backup.

  Glitches to occur.

• Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?

  Can I use the disk utility on an external hard drive Mac os 10.6.8 to repair the drive on my macbook pro running mac os 10.7.5?  My Macbook Pro does not start after that I upgraded to mac os 10.6.8 Lion and I have a bootable backup just before the upgrade.

  OS X: on OS X Recovery - Apple Support

• Need help in using the ActiveX to retrieve a VARIANT

  Need help in using the ActiveX to retrieve a VARIANT.

  Variant is shown as var {VT_Ul1, 1} in debugging

  By using the following

  HR = CA_VariantGetShort (& var, &value);)

  I get 0 for my answer instead of 1.

  Answered my own question.

  VT_Ul1 is an unsigned char and not a short.

• If I have a computer with Windows XP, can I use a disk given to me with Windows Home Vista on a download to update my Windows XP it

  I have a computer comes with a Vista disk to the Windows Welcome page and now have acquired another (employee) computer that has Windows XP, service pack 3 on it.   Can I take the Windows Home Vista disc and put it in my computer that has Windows XP on it and use the disk to upgrade to Windows Vista Home page?

  Simple answer - No.

  If the Vista machine is preinstalled, the software is locked to this motherboard and cannot be moved or installed on any other machine.

• I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS?

  I have a computer that has Windows 2000 Pro, I can use the disk to upgrade to Windows XP with this OS? It's

  an old computer, but it works very well.  I want to switch to XP using the Windows upgrade disc. But

  in the specifications it lists only 98, 98 Second and ME as an operating system you can upgrade.  Thanks John

  Provided the specifications of the computer meets Windows XP you can switch from 2000 to XP. If it does not meet the specifications, you may upgrade the computer first or get a new one which is more cheaper today.

  In addition, please note that you can only switch to Windows XP Professional. If it is a home edition you have then it will not work. You can refer to the link below on how to update your copy of Windows 2000 to Windows XP Pro.

  http://support.Microsoft.com/kb/978307

• My XP desktop seems to have thrown my 'system tools' function and I want to use the disk cleanup and defragmentation... How to get back the system tools?

  My computer is as I said above a desk with the microsoft XP program and is a little less than five years.  It has been slow and it dawned on me that I hadn't used the disk cleanup or some defrag for a while, but I clicked on start, all programs, accessories, System Tools was is no longer.  I have not been able to access the disk cleanup or defragment option and hope that out there, can someone advise me how to get this feature.

  You can run Disk Cleanup and Defragmenter disk since the start > run box by typing the following

  Cleanmgr
  Dfrg.msc

  You can restore all of the 'Accessories' group (including system tools) by following the directions here--> http://windowsxp.mvps.org/Accessories.htm

  Or you could just create shortcuts to

  C:\Windows\system32\dfrg.msc
  and
  %SystemRoot%\System32\cleanmgr.exe

  Note that % SystemRoot % is the directory where Windows.  You can use this form or explicit as in the example for the shortcut from the Defrag.

• Using recovery disks that I created.

  I recently had to wipe my hard drive clean by using the recovery option on my com computer system Before that, I created 2 recovery discs using the SonicRecordNow program that came with my computer. I saved images, word documents, e-mail settings, etc. on the 2 discs.

  Now that my computer has been restored to factory settings, I can not understand how to use the disks created to restore my files, pictures, etc...

  You just copied the files and folders to CDs/DVDs, or have you used a backup solution that has been delivered with RecordNow?  HP computers were called "Backup" associated with some old versions of RecordNow.  As far as I know, this is no longer available, but if that's what you used, see this article .

• I need help to use my gateway as a monitor for mini mac 2011 2012

  OT: installation.

  I need help to use my gateway as a monitor for mini mac 2011 2012

  You should ask the community of Apple Mac

  Community: Mini Mac | Apple support communities

  Apple Mini DisplayPort to VGA adapter. Use: Use the adapter Mini DisplayPort to VGA to connect your Mac to a standard analog monitor, projector, or LCD that uses a VGA Connector or a cable. Compatible with: MacBook Pro (retina, 13-inch, late 2012) and later versions. November 11, 2015
  On Apple and cables - video cards Support Apple

• Hi microsoft... Please help im using firefox, how the task i hidden bar when I watch YouTube... its always show when I watch any video please help

  Hi microsoft... Please help im using firefox, how the task i hidden bar when I watch YouTube... its always show when I watch any video please help

  You can ask the Firefox forum.
  http://forums.mozillazine.org/index.php?c=4

  I hope this helps.

• I have a new iMac and used the disk to install version 6 of photoshop, but I have upgraded to version 12, but its installed version6. How can I get version 12? I tried to uninstall, but it does not ask the serial number version 12. Thank you

  I have a new iMac and used the disk to install version 6 of photoshop, but I have upgraded to version 12, but its version 6. How can I get version 12? I tried to uninstall, but it does not ask the serial number version 12. Thank you

  If you want version 12, then you don't need to install version 6, you must install version 12.  If you are really talking about Photoshop Elements, not Photoshop, then the link below, you should get to the download.

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html