Help help BSOD on startup
Hi guys, I'm having a huge problem here. In the last 3 days I got a BSOD on startup. I can start on the desktop, but less than 2 minutes, BSOD.
The message indicates a driver in the kernel stack is trying to corrupt the system. He said Stop: 0x000000c4 (0 x 0000000000000091., "Windows has recovered from an unexpected shutdown" gives C:Windows\minidump\070515.18392-01.dmp
in the form of files that describe the problem.
Only, I can start safe mode. However when I do the block driver files list at classpnp.sys for at least 30 seconds. before continuing on the desktop. What should I do? I really need help.
Unless there is a reason you run the driver verifier you should disable by typing auditor/reset in an elevated command prompt. Auditor of may be the cause of the problem. 37 of the 50 BSOD were related to the auditor running and there was no clear underlying (and unifying) cause.
Blocking it also does not work in safe mode because the auditor is disabled in safe mode.
I would also like to launch malwarebytes
Do a full scan of the system
Let us know the results at the end.
I had the opportunity to reset to "help stop the startup slow browser" option. He did his thing and now all bookmarks are gone. How to restore or find which profile these bookmarks are on.
Sorry to hear about this. Your old data must be in a folder on your desktop named old data from Firefox. You will find this file? If you go down the old profile folder (name is random semi, but often ends by default) and look for a folder named bookmarkbackups can you will find a file named recently along these lines:
In this example, 9 876 bookmarks have been saved on 11/12/2016.
If you have a good candidate for the restoration of your new Firefox, this article includes the steps:
Note: the recovery menu may show a fresh backup, but you should probably use choose a file and point Firefox in your old Firefox data folder to find the one you want.
My girlfriends laptop (I'll post it) is relatively new, October 2011, but was making BSOD and startup repair issues.
I don't know what is happening, but I posted the Minidump to Skydrive here folder: http://sdrv.ms/S4MyUF
Use the methods in the convenience store posted
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
I have a little problem with a Toshiba laptop, I got (for a friend) and I was wondering if I could get advice on what to do?
Basically, you cannot start the machine past the Windows XP OS loading screen. I don't know what they were doing, but it seems as if a critical system file has been deleted or corrupted because whenever you try to start, the machine is showing just a blue screen (BSOD), and the same thing occurs if you try to start in safe mode.
It is impossible to get a BSOD code as the laptop restarts after displaying the message for 1 second, and the cycle starts again. I don't think she has a recovery disc for the machine either, but I have a copy of Windows XP Home hanging out somewhere, if need be.
Any suggestions on what I can do, because the only thing I can think to do is to reinstall Windows (I imagine will also be a problem).
No matter what?
For the most part the BSOD occurs because of the serious software error or malfunction of the equipment. In case you I would say, its software.
Help BSOD messages don t usually because you will get dumps of memory common user is not able to read such messages.
I think you should try to reinstall the operating system. If you haven t CD recovery, then you use the CD of Windows and after this installation, you could install the drivers of Toshiba of the page.
I have a satellite Pro 4300, running W2K SP4. He had since 2001 with no problems.
Recently I get "unexpected kernel mode trap" and sometimes "ACPI BIOS is not fully ACPI compliant" BSOD at startup (before it comes to any type of graphics). Happens in secure and normal mode.
By experimentation, I found that I get no BSODS and boot normally if I F2 during startup and just hang out for a while (five minutes or more), then start.
If I run a memory test after starting in the Ultimate Boot CD, sometimes I see a lot of bad memory, sometimes not. I think it depends on how long I waited to boot from the CD.
Everyone like to hazard a guess, be it hardware or software? I guess rather than the former. I guess it could be the memory that went wrong, or worse on the motherboard power control began to go.
In both cases probably don't bother to fix, but I have the opinion of anyone.
I don't know with certainty what can be the problem but the spare part for this old good classic are not expensive and you can try to do some experiments. Check eBay. You'll find everything to implement. I imagine that together for this oldie mainboard should not be expensive.
Check the price and decision.
A few months ago, I lived three or four power outages in the coming days while my computer was on. I don't have a UPS. Since then, I get a BSOD at startup intermittently. Sometimes the Vista recovers on restart, sometimes, I get another. Usually, after the second, Vista gets - I had a third only a few times and never a fourth. When Vista covers, it works perfectly normally, except after that my desktop, I get a totally white screen for a few seconds, then returns to the office and everything is fine. Is there something I can otherwise only reinstall Vista? I did a chkdsk and a test of memory vista, no problem.
The good news is that from a windows update from 12/6, 7 or 8, the problem is GONE. All of these updates were to Windows Defender, so that is what was causing the problem obviously.
I had my T410 since the end of last month and had a BSOD on startup several times so far. Whenever I caught, I noticed that the driver nvlddmkm.sys nvidia was the cause. Each time the BSOD, I get the prompt "windows did not start successfully", how by selecting "Start windows normally" translates the fine start System. Since this BSOD is only presented to a cold start, I'm not too hampered by it outside my boot up times by doubling the time it does. I ran the update of the bios/driver Thinkvantage, as well as I'm running with the latest updates for Win7 Pro x 64.
Everyone knows this? If so, have you found a solution? No matter what Lenovo personal support out there have an entry?
Hi well it hade to get to my laptop does not start and was working fine last night all the I get a message from chesy "We apologize for the inconvenience, but Windows did not start...". »
Safe mode with networking
Safe mode with command prompt
Last known good configuration
I tried all the options and not start Windows even safe mode all I get are some instant loading files then blue screen and reboot (too fast to read).
Pressing F8 gives me more options:
Enable Boot logging
Enable VGA mode
Last known good configuration
The Directory Services Restore mode (your most recent...)
Disable the automatic restart in the event of system failure
Start Windows normally
Return to the operating system choices Menu.
Help? What am I, I guess that anyone do?
I disabled the restart on system failure, I get the following message:
A problem has been detected and Windows has shut down to prevent damage to your computer.
IF this is the first time your saw this screen, retart your computer stop error message.
STOP: 0X0000007E (0XC0000005, 0X3F3F3F3F,...)
My laptop is the Equium A60 - 181
Have you ever tried to use the System Restore tool to restore your device to an earlier time?
I have never actually solved a BSOD problem, and I hope that this will be my first time! :)
Here is the link to my Minidump file: http://1drv.ms/1eGOvpv
My utility BlueScreenView says that ntoskml.exe is somehow involved - but other threads on this site of questions and answers suggest that this is probably just a symptom, not the cause, of my BSOD.
All of your help, input and advice is much appreciated!
Well, my problem is SOLVED and you played a huge role to solve. But... it has not been resolved as we both waited. Unfortunately, the new external hard drive enclosure did not prevent the BSOD little once the drive has been removed safely. But! :) Helped you eliminate so many root causes (AVG, Norton...) and you had raised the possibility of a pilot did not cooperate, so I was wondering what (s) may be involved in my external hard drive is disconnected. By chance, when I searched on Google, I've included a search term that I never thought about you: eSATA! My external hard drive is connected via eSATA. So when I search Google Dell, BSOD and eSATA, I soon saw a page which seems to indicate that I should check that I had the last pilot technology Intel Rapid Storage Technology. And sure as heck, I had not installed at all! Then, installed this driver and - bingo! -everything works perfectly now!
But I NEVER would have gotten there if you had not encouraged me before and help narrow my focus on the external hard drive and drivers. Yes, thank you Patrick! So far as I am concerned you have solved this mystery, more than any! And I am eternally grateful!
I saw many items, to try to fix this and it wouldn't work on my laptop.
I use a Lenove Thinkpad Edge E430c
I had this BSOD error:
STOP: 0X0000009F (0 X 00000003, 0X864B9908, 0X833419E0, 0X9A99BC28)
The last thing I did was update my cd/dvd driver. My laptop cannot read any cd, so what I did is to update its driver automatically using program windows 7 that updates your drivers and it worked! I can read CDs and DVDs now, but that's when the BSOD has started. When I tried to check my cd/dvd driver, she'll tell me that everything is fine.
the BSOD will appear at random and not when I try to restart or shutdown my laptop.
I hope someone could help :)
Send a copy of your dump file in a shared file on your disc of sky with a link here.
The dump file will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.
What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?
Please download and run the display driver and download a copy of the report he produced on your sky player. To obtain a report all drivers Select Edition, select all followed by file, save selected items.
Please provide a copy of your system information file. Type system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download your disk from sky to share with everyone and post a link here. Please say if the report was obtained in safe mode. The request for a copy of this file is additional to answer the question about the brand and the model.
Help with Sky Drive see section 9.3:
I use oracle 10g on 32 bits of windower server.
I try to start my database today and it gives me error, and that's my production database.
I need very urgent help you. (I have no rman backup, and data are not n6cessoires so, since it is the practice of the student).
SQL> startup open ORACLE instance started. Total System Global Area 524288000 bytes Fixed Size 790180 bytes Variable Size 250343772 bytes Database Buffers 272629760 bytes Redo Buffers 524288 bytes Database mounted. ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY' ORA-01115: IO error reading block from file 34 (block # 1) ORA-27070: async read/write failed OSD-04016: Error queuing an asynchronous I/O request. O/S-Error: (OS 23) Data error (cyclic redundancy check).
I need further assistance on your side, I restarted the server, but the same problem.
as there is a way to drop and re-create a system tablespace? given that the 34 file belong to the tablesapce system.
So just create a new database. Who will have every ten minutes. And to say that your students to create new storage spaces. Who will be the two minutes.
Looking for someone to help me read a minidump file.
The file can be found hereThese accidents were related to the corruption of memory (probably caused by Symantec).If you are overclocking anything reset by default before running these tests.In other words STOP! If you don't know what it means that you're probably not
1-Driver Verifier (for full instructions, see our wiki here)
2-Memtest. (You can learn more about running memtest here)
This morning, I found a window on my PC (vista home prem SP 3) who said he had a problem with my departure upward. And that characteristic fixed departure could not fix it. I tried to restart my PC and he had charge green/starrt infinite loading bar. I tried to start in safe mode, but can apparently do not have start that is. I grabbed my system recovery DVD, tried to have either boot with the DVD or are looking for a repair-start feature. But when I try to start from the DVD he wants to restore then only of factorry. Did I miss something there at - it something I can do? I don't want to do a restore with since I have given, I don't want to lose and he's going to take me with all my software and udates about 1 week at least for good install and configure my PC.
· What is the exact error you see on the screen?
· You did changes to the computer before the show?
Check to see if the following is useful.
Method 1: Remove non-essential external devices and reboot the computer.
Method 2: Repair of the boot from WinRE (Windows Recovery Environment) mode. Follow the article mentioned below, to do.
My computer is an Envy23. I have Windows 8.
There is a problem when I try to boot my monitor: I see the HP logo, and then it disappears (as usual) but the screen remains blank. I tried leaving it there for hours to see if there would be a change, but absolutely nothing happened. I did several tests of diagnosis on the computer, but still can not solve the problem.
Any ideas on what should I do to get rid of this?
Thank you very much.
Finally, I tried to restore the computer once and it has actually worked so it starts right now!
I worked on a rugged notebook.
But he sometimes bluescreen.
Could someone please take a look? Thank you.
111115-12792 - 01.dmp 11/11/2015-14:44:02 DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1 00000000'00000074 00000000'00000002 00000000'00000001 fffff880'056ec16c NETwsw00.sys NETwsw00.sys + a016c x 64 ntoskrnl.exe + b 75, 80 C:\Windows\Minidump\111115-12792-01.dmp 2 15 7601 290 781 14:44:55 11/11/2015
Here's the minidump file.
https://onedrive.live.com/redir?RESID=AD5D61C4C5A57E0F! 1248 & authkey =! AFt983Vv-v_uea0 & ithint = file %2 c
Thank you again in advance.
Associated with the Netwsw00.sys Intel® Wireless WiFi Link Driver of Intel CorporationRemove the driver current completely and install the latest driver available. For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here
Maybe you are looking for
the balance of my iTunes does not appear that I just bought a gift card to iTunes
This message p [ops upward when I run iTunes] Money cannot connect to the store purchases. If you have any firewall software, make sure it has been set to allow communication on port 443. How can I fix it?
I can't understand how to download service pack 2 on my computer. I continue to download free service pack 2 because I think that's what's causing my computer does not recognize microsoft office suite 2010
Hi, I do not know if I am in the right section, sorry if not.I have problem with Oracle SQL developer 184.108.40.206.48 (also SQL developer Data Modeler), which does not load under win 8.1 update 1 (fully implemented win8 to date).I get only start screen w
Has worked with the provider of the ISP for 3 hours and determined with the computer problem. Has been able to access the internet using a desktop computer and excluded the modem as the culprit. Literally arrived the day after. Connection status