Help internet wiith does not not & light on the ethernet modem. Should I replace my card?

Similar Questions

• Windows Defender does not light in the center of the Action. I deleted Norton

  I have Windows 8, firewall, & cancelled Norton. I want to erase Norton. Windows Defender does not light in the center of the Action.

  Thank you in advance.

  If you turn your active antivirus protection on the Defender will run in this case too. I tried it on my Windows 8 Pro PC. I managed Antivirus and when I disable its protection active and turn the Defender Defender works with accuracy.

• I don't know but its all white: my tablet screen does not light, but the sounds and touch are ok. Please help me!

  I dropped it and now the screen does not light, but sounds like the notifications are on.

  Hi!, Sensei:

  Welcome to Forum!

  To help you, is necessary that you enter make, model (without serial number) and operating system.

• Help, INternet explorer does not work after windows update

  One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
   
  After installation, my INternet explorer does not work.

  It reads:

  Windows could not access 'ie.redirect.hp.com '.
  Windows received an HTTP error message: 403 (refused).
  -> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.

  Then I click ok, and then try to go on 'www.google.com '.
  It still does not work, so I click on diagnose connection problems
  This time, it reads:

  Windows not found no problem with the network connection on this computer.

  You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
  Send information

  But when I send, I can not because I have Canon go online on my Internet Explore.
  When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.

  I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.

  I tried everything, but I can not do it by myself, so help please!

  @ceda only: See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371

• Internet Explorer does not open in the metro interface

  My IE does not open in the metro interface. This is my default browser & I disabled all add-ons. What can I do now?

   

  Hi Wendy,.

  I understand that you can access the modern user, Internet Explorer interface, but desktop Internet Explorer works fine. To better understand the question, please answer the following questions:

  (1) what exactly happens when you try to open Internet Explorer to the modern user interface?

  (2) has received no message/error code?

  (3) what are the changes to the system prior to the question?

  (4) you are able to access other applications for the splash screen?
   
  (5) you are able to launch the desktop Internet explore?
   
   
   

  Method: Please delete the following registry key

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.

  (a) go to: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_DLLs

  (b) delete the value: (C:\PROGRA~2\WI3C8A~1\Datamngr\datamngr.dll C:\PROGRA~2\WI3C8A~1\Datamngr\x64\IEBHO.dll)

  (c) reboot and retry launch browser IE10 Immersive

  Important: Serious problems can occur if you modify the registry incorrectly. For added protection, back up the registry before you edit it.

  Back up the registry:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
   
   
   

  Hope it solves the problem, if you have other questions about Windows, feel free to post.

• Dell Dimension 4600 with pack 1 XP does not connect to the cable modem

  Hello, I have a Dell Dimension 4600 older XP. The hard drive is dead and I replaced and then reloaded pack 1 with the intention of making all the revisions on the internet. The problem is that I cannot now connect to the internet via my broadband router directly connected to the computer. It seems that the wizard to connect only wants to use the dial upward and does not connect to the router. Just recompose. It seems to ignore the connection from the router to broadband and wants to use the dial upward only.

  Go to control panel of control/Internet options/connections, then set it - never establish a connection - then click on apply.

• Linksys Router WRT160N - Wireless does not connect to the cable modem

  I installed the Linksys WRT160n router to replace an existing G router. When installed the new wireless router works, but the router does not receive a connection (IP address - look under status) of the cable modem (so no internet). When I reconnect the old router and then connect the new router, I get any internet connection through two routers (so the old dishes router the IP address that accepts the new router).

  I have configured the router N new for

  "Automatic configuration - DHCP", no need for connection, IP address dynamic, etc (as required by ISP - Timewarner)

  I tried to renewal and release IP address by the router N when it is connected directly to the main switch (the switch to connect to the cable modem). In so doing, shouldn't that assign a new IP address to the router?

  I am allowed 3 IPs from the cable company (because of the switch) and I use all three with three different internet IP cameras to each address for home security system.

  Any suggestions on why the router is not connecting to the internet? Do I need to reboot physically everything on the network, including the cable modem?

  If I understand your post, you said that your ISP gives you 3 Internet IP addresses and you have 3 cameras that use one of these Internet IP addresses.  If this is correct, then that leaves no IP Internet address for your WRT160N use - so that would explain why your WRT160N cannot get an Internet connection.

  If I misread your post, and you have an Internet IP address available for the WRT160N, you might have a problem with your modem and two WRT160N tries to use the same 192.168.1.x subnet.  To check this, follow these steps:

  (1) Please indicate addresses that use your cameras (IE before you take the test below).  If the addresses do not begin with 192.168, then erase the last half of each address.

  (2) Please indicate your ISP

  (3) Please indicate the make and exact model of your modem (not the WRT160N) number.

  (4) Please do the following test:

  Put your entire network.  Disconnect the switch (including cameras) to the modem.  Using an ethernet cable, connect your modem directly to your computer.  (Do not use the WRT160N for this test).  Turn on the modem and the computer.  Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

  Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key.   Copy all results in your next post.  To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys.  If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

• I need help my pc does not connect to the internet after installing updates

  My internet does not work after you install the updates so I uninstall and they work fine.

  It happens all the time as I paid for the program and downloaded on my PC and they need to access the internet at work and when I click on it it say failed to connect or unable to connect to what happens with that?

  I downloaded mozilla fire fox and that no longer works and the same for IE8 after instalation my internet does not work why?

  I need serious help to what I at least need these programs, I bought to work.

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  OR

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  Post back with update KB number, you are having problems with.

  See you soon.

  Mick Murphy - Microsoft partner

• Screen does not light after the start, but after standby on Satellite M100

  Hello
  I have some experience with computers and laptops, but this problem exhausted all of my knowledge.
  My girlfriend has a Toshiba Satellite M100, PSMA1E. He currently works on Windows XP, SP3.
  The laptop has always had problems closing/stand bye. He would stand bye and the screen would not. She would usually be manually turn off (holding the power button) and restart.

  Same thing happened last week, but with me. I turned off the power button but when I turned it on the screen was completely black. After a few attempts, I realized that everything worked; I could hear the usual audio files and XP Boot, but there was no way I could get the job of the screen.

  The strangest thing is that the CMOS/BIOS, one with the Toshiba logo settings screen, also does not appear. If it's an OS problem, I thought that I would be able to access the BIOS at least, but it does not work. FN + F5 does not work.

  Then, strange yet something happened. I was turning it on and off with keyboard shortcuts and I realized that if I put on stand bye using shortcuts and then go back on the screen turns on perfectly well (there is a cause of adjustment resolution icons are irrelevant, but it works perfectly fine).

  From that on I tried everything I know. Update the BIOS, all Windows XP updates, all Toshiba QuickFix, cleaning the registry with different tools, uninstall and reinstall the video driver (ATI Radeon X 1400) utility, shortcuts keyboard, power saver, tools hardware Toshiba, looking to start up programs, services, everything I could possibly think off.

  What intrigues me is that the Toshiba start screen will not be displayed. I can't access the BIOS, but I tried to restore the standard values of the BIOS with Toshiba hardware tools. It did not work. I don't even know if reinstalling XP will work because whenever I turn it on it is all black and I have to make the stand bye / Tower on Tower.

  When I have it plugged into an external monitor, I could see all starting the process (initial screen of the BIOS and Windows). I then tried to access the video driver display configuration but it would show only the external monitor. It would only detect the laptop screen after a stand bye / turn back on, and then it worked perfectly: the screen two screens simultaneously, extended, everything. Ah, changing BIOS selection automatic the LCD + external monitor does not work.

  I am really puzzled here and I can't understand it. I really don't think it's a hardware problem, because the screen works 100% after the stand bye. I guess that XP is do something during the closing down that completely 'stops' my screen, even after starting, and then I can only turn it on with the thing stand bye.

  Any help would be really appreciated!

  Best,

  Hi guys

  I had a similar problem on a series of Satellite A200 and I could solve works to update the BIOS and update the graphics driver.
  In addition, you must make sure that all available MS fixes and patches have been installed.

  Unfortunately, but that's all I can suggest. If the problem persists and you would not be able to solve update components then an ASP needs to check.

  Good luck

• Internet Explorer does not open on the computer running Vista

  Internet Explore has not opened. I don't know what problem I think it is uninstall the laptop cannot help me on the. I I click this icon on the desktop but it wasn't open. and that I was the guy in the beginning years serch internet explore so i saw portable internet explore and when I click on that it was open, but I can't type as they removed the registry key. so please help me

  Internet Explore do not delete open on computer

  Hi jayrajpatel,

  See the article after some troubleshooting for your question:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My satellite phone battery does not light and the battery won't charge (rest on 2%)

  Basically, my laptop is 3 months old and I don't know why it's acting weird. First of all, when I bought the laptop in June 06... the first week the laptop has no power in battery mode. So I stopped using the battery mode and still had to use my power adapter to power my laptop.

  Now 4 weeks later, I removed the battery to the rear and put again. Guess what the battery started working. Now 2 months later the same problem occurs, only that this time after removing the battery to it still turn on and the battery says 2% and also fails to load.
  So I m stuck with my son again... can anyone help?

  Hello

  In my opinion the best solution is to confront your local dealer with this problem. If I were you I wouldn't waste time. Unit is fairly new, warranty still valid and unit should operate.

  Perhaps is there some problem with electronic supply power.

• Intermittently, Time Capsule does not connect to the cable Modem

  Capsule time bought a few weeks ago.  Barely implemented.  TC does not recognize the cable modem.  These forums to get help.  Tracking the specific set of sequence with long delays between the steps and the modem and the TC.  It worked for about a month.  Now about once a day the TC works but not internet wireless or ethernet through the CT.  If I unplug the TC and let it restart and initialize internet connection returns.  During the internet cuts I have ethernet and Wi - Fi at transport CANADA, printers, and drives on the network as well as the time Capsule backup drive and your data.  If I ever lose ethernet and Wi - Fi to TB.  In addition, the modem works fine.  If I cut the TC and to the cable modem ethernet connection I have access to the internet.

  Thank you.  All were huge last time assistance.

  If it's always the same modem... a SB6141 of Arris... There have been a number of reports of trouble with this product with Apple routers. There is no mention that in your first post a month ago, because we wanted to see if a reset of the good modem would get things works well for you.  I had the same experience as with the same exact modem you have.

  The SB6141 is a good product, and the time Capsule is as well. But for some users, these two products do not work as well together. If you call people to support for modem, they show sure to like the question time Capsule. If you call Apple, they will have a different view on things. The bottom line when you go to a support group... because it of always the other guy that you are having problems.

  At this point, the only real solution would be to decide if you want to try another brand and model of modem and keep the time Capsule, or keep the modem and try another brand of router and then connect the Capsule to the router.

  In my case, I replaced the SB6141 (I tried 3 different SB6141s previously because the ISP admitted having difficulties with this modem and some routers) with a 5341J Zoom, and did not have a single falling Internet connection since I installed the Zoom for more than a year. If your Internet service provider indicates that the Zoom is a product that is compatible with their service, you might want to try this modem.

  But unfortunately, there is no assurance that the "solution" that has worked for me will be the solution that suits you. Such is the nature of the beast, when you work with products from two different suppliers.

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• Router WRT54G wireless does not work with the new modem

  Hi, I use my router WRT54G (Firmware version v2.02.7) on 4 computers for more than four years now, without any problems at all. However, today I had to replace my old modem with a brand new modem Speedtouch from my supplier, and although I made sure each cable has been connected properly, it just doesn't.

  The connection between my PC and the router (http://192.168.1.1) is good, but the problem must be between the router and the new modem. When I click on 'Status', he said: ""connection status: disconnected".

  After clicking on the 'Connect' button, it tells me that it "can not connect to the PPTP serverbe"

  Help, please

  Hi Matt,

  Although the resolution of this problem was a little simpler, I still thank you for your answer.

  The neighbor boy came up with the following response:

  «It just check the Type of Internet connection, cause you got an old type of modem before.» It will probably be set to PPTP. If this is the case, simply change it to "Automatic DHCP Configuration", click on "Save Settings" and everything should be ok then"

  And he was right!

  I am so happy

  BR,

  Niqui