Help keyboard Simulation

Similar Questions

• IdeaPad Z710 help keyboard replacement!

  I just bought a referbished ideapad z710 and I wanted to replace the keyboard. I have Googled it and have yet to learn more. I'm pretty possitive keyboard has a screwholding in there. Can someone help me know where it is?

  Good day and welcome to the community.

  Please take a look at your hardware manual pg44: https://download.lenovo.com/consumer/mobiles_pub/ideapad_z710_hmm.pdf

  It seems that the keyboard needs a helping hand underneath.

  I hope this helps.

  Kind regards.

• Behavior of virtual keyboard - Simulator version 0.9.1

  I have problems with the virtual keyboard. Sometimes it grows my application upwards, sometimes it covers only half of my application, but I don't know what will be the actual behavior of the device.

  Can someone please clarify whether the keyboard will indeed push to the top of your application?  Otherwise, I'll have to build something that moves "the fold" top text boxes

  Thank you

  Try it in the Simulator current 0.9.3.

• Simulate a keyboard in Captivate 5

  I am eager to find a way to simulate a keyboard alarm in Captivate 5.  I have the image there, but what I want is for the user using the keys on the keyboard to enter a PIN and have Captivate branch depending on whether or not they are entered into the right AXIS.

  So it would be necessary to register (variables?) somehow pressed buttons and branch then after you press the Enter key on the keyboard.

  I glanced quickly at a few options but do not seem to be getting anywhere - I had thought that something to do with clickboxes and advanced actions?

  Thanks in advance for any help (even if it's just to tell me that it cannot make Captivate).

  Hello

  Has published an example with explanations in an article. You can find the link in this blog post:

  Create a keyboard simulation

  Lilybiri

• Changing keyboard settings

  How can I change my keyboard so that when I type "and"letters such as e and u can I get them directly from the keyboard?

  OMG, I finally found the answer!

  I contacted HP support by phone and they gave me the following links:

  http://Office.Microsoft.com/en-us/Word-Help/keyboard-shortcuts-for-international-characters-HP005186562.aspx

  http://answers.Microsoft.com/en-us/search/search?searchterm=how+to+enable+to+short+cut+using+special+symbols&CurrentScope.ForumName=Office&CurrentScope.filter=&askingquestion=false

  The second link, I was able to find the following document:

  http://support.Microsoft.com/kb/306560

  Which describes the exact layout that I wanted. In order to obtain foreign language characters (for example ' and e = é) the default language (in the region and language in Control Panel) must be changed to English (United States) - United States-International. If you do not want the foreign language characters (for example ' e = ' e) then the default language must be English (United States) - U.S..

  I think that my settings have changed when I said to Microsoft Word to make the default language in English (Australia) so I just need to change the default language - in the region and the language for English (Australia) - United States-International (Australia) rather than English US.

• I use LR5.  I have not a selection in the edit tab allows you to create keyboard shortcuts?

  I use LR5.  I have not a selection in the edit tab allows you to create keyboard shortcuts?

  Lightroom keyboard shortcuts are coded hard and cannot be changed by the user.

  See here for the list:

  Lightroom help | Keyboard shortcuts

• What are the keyboard commands to apply the outline of the elements

  I can't see a list of keyboard commands that can be used to apply elements of contour as scene position, Action, character, etc.

  Is there a quick reference list somewhere?

  Thank you

  Check this: http://helpx.adobe.com/story/help/keyboard-shortcuts.html

• TabGroups Manager use/uninstall deleted view - toolbars - tabs on the top menu.

  After using the TabGroups Manager addon for a short period, I decided to remove again. One of the options that it allows him to use tabs on the high function, I was using. He puts his own groups of toolbar in the title bar, but it seems buggy, so I removed it, with tabs on top still operational. I had been using it via the main menu, by using Alt-V-T-T. After you remove TabGroups Manager according to the normal procedure, from the extensions page and restart, I realized that I had tabs on top and went to restore it, but the element is missing from the menu. I don't know any other way to change this, but the biggest concern is that the menu items have been removed at some point. Please could you tell me what may have caused this and how to restore the option.

  The status bar is no longer used in current Firefox releases and is replaced by the add-on bar (view > toolbars).

  Current versions of Firefox only show the menu entry "Tabs" at the top menu "view > toolbars" and "Firefox > Options ' and in the shortcut menus toolbar if the tabs are not in the default position on the top.

  If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.
  A restart of Firefox is necessary for updating the menu entry to display or remove.

  Note that this pref will no longer effect when the code Australis lands on the output channel (which will be in Firefox 29,0).

  • http://www.gHacks.NET/2014/01/31/Mozilla-decides-uplift-australis-Firefox-Aurora/

  Some menu entries in the main menu bar are hidden if you are using the mouse and only appear if you use the keyboard to open the menu.

  Some entries in the View menu and history have been deleted to clean up the UI, because studies showed that it was low-use items.
  
  On Windows and Linux, these were already hidden when serve you the mouse to enter the bar of menus and only appeared when you used the keyboard.
  
  You can click on the button Home (far-right on the Navigation bar) or the keyboard (Alt/Option + Home).
  
  You can find backward, forward and reload from the context menu in the navigation area or the use of the buttons on the Navigation toolbar.

  See also "help keyboard shortcuts >.

  • https://support.Mozilla.org/KB/keyboard+shortcuts

• What is the key race to recharge

  In safari, the key to reload is Apple + R
  What is main features to reload in Firefox

  See also "help keyboard shortcuts > ' for easy access.

• Problem laptop new

  Ovako, laptop uzeo computer sam E. I have sad sta is desilo, ja sam hteo da ga pustim da is skroz isprazni. DOsao I do jedno 7% I ja pustio muziku da is sto pre isprazni. Odsviralo I you'm, dve pesme I sve zakocilo, nije mogao da is ugasi nor na Selma. punjac isti ali problem sam stavio. Izvadio sam bateriju, vratio, nije hteo da to ukljuci, stavio punjac I ukljucilo to. Proverio baterije status, receive 4%. E sad, jel to neki problem? ILI uobicajena pojava?

  I bought the new laptop Lenovo g575. First, I use a PC to force the discharghe battery, because I want to unload completely and full charge. That's happened.

  Came to 7% and I play music to speed up the process of unloading and laptop is a gel after 2.3 songs. Closure with button did not help. keyboard also freeze. I took out the battery, returned and try to turn on the pC. It can not. Nothnig happened. When I put the charger it's turing. What may be the cause? Battery not adjusment or something else?

  Hello

   
  It's a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
   
   
  If above does not work, I would say to contact Lenovo for better assistance.
  http://support.Lenovo.com/en_US/

• custom textfield click event do not consume of RET.

  Hi all

  I implemented a custom text field that extends the BasicEditField...

  public CustomTextField (String txt) {}
  Super ("", txt, 300, BasicEditField.EDITABLE |) BasicEditField.FOCUSABLE | BasicEditField.ACTION_INVOKE);
  isSearchBox = true;
  textFieldFont = textFieldFont.derive (Font.PLAIN, 12);
  textFieldHeight = textFieldFont.getHeight ();
  textFieldWidth = Graphics.getScreenWidth () - 90;
  setText (txt);
  }

  It's my constuctor...

  When textfield already contains text, it does not consume event back.  It shows all the other essential characters but when at the beginning, I click back (from keyboard simulator) no action will take place. Although he has to take because I have no overrided any other method to do anything manually.

  Please if anyone know what to do. Please let me know.

  Thank you.

  Do not use onfocus and unfocus handle and the text field

  {} public boolean keyDown (int keyCode, int time) this method with caution... never return true for all keydowns...

• BlackBerry Smartphones, increasing the font size for received emails?

  Is it possible to increase the font size of emails/texts received on this unit?  My eyes have trouble read standard size.

  you know you have a request for assistance within your device?
  who can help you find that kind of information.

  Home screen > help > keyboard and display > display options > change display font

  For more convenience, it is also available on the Web here:
  http://NA.BlackBerry.com/eng/deliverables/4652/Set_the_display_font_26179_11.jsp

• The key macro for windows touch mouse explore

  Hello. I'm a new user in OneNote and one of the features that I love is the copy - paste into OneNote.

  To access this feature with the keyboard, the key combination is 'Windows key + s'.  I bought the Explorer touch mouse with the intention to reassign one of the buttons of the mouse to perform the 'Windows key + s' command.
  There is the possibility to add a macro in the basic commands and there is the possibility to choose a special key (Windows key), but this does not work in the implementation of the macro. When I press the assigned button, the taskbar appears for a second or two and a letter 's' appears on which window is active, but I can't figure out how to get the "Windows key + s' feature.
  Ideas?

  Hi Roger,

  You can change the shortcut to a macro, to so proceed as follows:

  a. open Microsoft Office word (changes will reflect on all Microsoft Office applications)

  b. click the Microsoft Office button, and then click Word Options.

  c. click Customize.

  d. side of keyboard shortcuts, click Customize.

  e. in the categories list, click Macros.

  f. in the list of Macros , click the macro that you want to change.

  g. in the field Press new shortcut key , type the key combination you want to choose.

  h. check the current keys box to make sure that you're not assign a key combination that you already use to perform a different task.

  i. in the list record in , click the option that matches where you want to run your macro.

  Important: To allow your macro in all documents, do not forget to click Normal.dotm.

  j. click close.

  You can also see the following article for more information:

  Keyboard shortcuts

  http://Office.Microsoft.com/en-in/OneNote-Help/keyboard-shortcuts-HP001112536.aspx

  I hope this helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I want to accept only Arab characters in the input text

  Hello

  Is it possible to let the user just write in Arabic in the af input text?

  If he enter English tank when you use keyboard ENG that I want to prevent this event and not let him write without error msg and if it helps keyboard AR I want let write

  Thank you.

  You can implement something like this using javascript. You should prevent the addition of English characters of:

  -Keyboard

  -By using ctrl + v (in case you have copied English words)

  -Using right-click + spent (in the case where you have copied English words)

  To do this test to track the following:

  1 - inside af:inputText add 2 clientListener. One to accept only Arabic characters and the other for the deactivation of ctrl + v as:

  2 - Add af:resource with type = "javascript" and inside this write three functions:

  -an acceptArabic function.

  b disabledPastFunction

  c disabled right click on the page.

  as:

  
  
          = 1560 && k <= 1610) || k == 32)
      {
      }
      else
      {
        evt.cancel();
      }
    }
    ]]>
  
    function disabledPastFunction(evt)
    {
      var k=evt.getKeyCode();
      var e = window.event;
  
      if(e.ctrlKey)
      {
        if (window.event.keyCode == 86)
        {
          evt.cancel();
        }
      }
    }
  
    function dis_rightclickNS(e)
    {
      if ((document.layers || document.getElementById && !document.all) && (e.which == 2 || e.which == 3))
      {
        return false;
      }
    }
    if (document.layers)
    {
      document.captureEvents(Event.MOUSEDOWN);
      document.onmousedown = dis_rightclickNS;
    }
    else if (document.all && !document.getElementById)
    {
      document.onmousedown = dis_rightclickIE;
    }
    document.oncontextmenu = new Function("return false")
  
  

• After Effects. Refocus view Comp?

  I did my research and found nothing so far.

  The question:

  In a view of the model pane, if you use the tool hand or shortcut to move the view model around, is possible to refocus the default view?  This would be useful, if I have three or more comps I want to click on the tabs to compare the differences.  As it is now, each model has a shift parameter view recalled.  I want to refocus the view of model for one or all the comps.

  Is this possible?

  Thank you!

  We'll find keyboard shortcuts by clicking Help-> keyboard shortcuts

  Shift + /.

  Zoom to fit in the Panel Composition, layer, or film

  /

  Zoom to 100% in the Composition Panel, layer, or film

  ALT + /.

  Zoom up to 100% to fit in the Composition Panel, layer, or film

  For more look here under "Views" https://helpx.adobe.com/after-effects/using/keyboard-shortcuts-reference.html#panels_viewe rs_workspaces_and_windows_keyboard_shortcuts