Help! Laptop problems after firing AC cord...

Similar Questions

• Toshiba laptop problem after Gaming/Windows Update.__No solution on the web.

  Hello! I use a Toshiba laptop.

  I was playing a game and windows update popped up!

  He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.

  He will appear with the options
  'Safe Mode '.
  "Safe mode with network.
  "Safe mode with command prompt.
  "Last good known Configuration".
  "Start Windows normally".

  Whichever one I choose Windows XP logo appears, then crashes immediately, restart.

  So I tried to use "do not restart in case of shutdown"

  And the blue screen appears

  "stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).

  What is this error? I can't enter safe mode by the way!

  Thanks for your help.

  It's http://support.microsoft.com/kb/330182

  Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.

  If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.

  If you cannot start the computer, go to the next method to update the BIOS of the computer.

  For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:

  315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode
  314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

  Method 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.

  Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:

  1. If a driver is listed by name in the Stop error message, disable or remove that driver.
     • If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
     • If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
  2. If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
  3. Disable or remove drivers or services that you recently added.
  4. Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:
     http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)

  Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XP

  Method 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:

  1. Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
  2. Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
  3. Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.

     Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.

  4. Restart the computer.
  5. Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.

  Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.

  -----------------------------------------------------------------
  You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you!

• Need help with problems after you download Service Pack 2 for Windows XP Home Edition

  I downloaded the havce to uninstall Service Pack 2 only because when I rebooted the computer system has 4-bit color without the possibility to change and everything was HUGE. I need to have installed so I can play Sims and get the rest of the windows downloads. I can't do anything until this issue is resolved. Has anyone else has this problem? I'm working on a new hard drive (180 MB) and I don't know if I need to update the drivers that came with my gateway first, before I can install SP2 correctly. Please someone can help me I got appriciate it! Thanks in advance! If you have any other questions I can answer.

  ~ * Heather * ~.

  aka

  ~ * Slicky * ~.

  If you get just to install WinXP SP2 for the first time ever, keep reading. If not, tell us why you need to reinstall SP2.

  ==================================

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• laptop HP P3Z69EA #BHS: problems after downloading Skype

  the pc began to send me problems after l had downloaded windows 10 for the first time and therefore due all l again and re-download windows 10 because l had reset it but now struggling. whenever l download Skype his pc screen becomes black or it will just freeze. so my question is how l fix that and y at - it a Skype recommended for computer hp laptop or it has a problem somewhere.

  Hello

  Make sure that the version of Skype you download is compatible with windows 10.
  
  If you are having constant problems with Skype good it is compatible, please try to use another app - webcam cyberlink Youcam GOLD
  
  for support of Skype: https://support.skype.com/en/skype/windows-desktop/

• Help! R40 problems after reformatting

  I meet a lot of problems after reformatting the laptop using the IBM recovery tool that comes with windows xp. After installing the drivers and xp

  -I can't use the trackpoint (mouse) and I see no mouse pointer on my screen

  -the system detects any USB or flash drive

  -Problems of drivers even after installing the latest drivers ethernet network card and mouse. When I tried to install the latest drivers, he said: "the i/o operation was abandoned because of a thread exit or an application request.

  -Tried to install xp sp3 but I said the installation did not complete.

  -Cant even repair windows xp because he says "systemroot system32/ntdll.dll c0000221 unknown hard error".

  Well just solved the DIF. The edition of the ibm recovery software xp sucks. What I did was deleted all the data on the hard drive and install xp using my cd. Then, everything works perfectly.

• I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly fee

  I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error

  Hello

  This link may help: the application failed to start properly (0xc0000022).-Microsoft Community

  Kind regards

  Sheena

• Pavilion g6: my laptop stuck after its original windows is installed and updated drivers

  Hello team HP;

  I recently get the support of the HP team and installed my original windows 7 Home premium using my product key. Then installed the updates wireless, Internet and network at home, but in a short time, my stuck laptop and keyboard no could not work at all except the power button. Then I installed my original windows 7 Home premium and it is, I can access although I could not installed other programs and my personal ducoment.

  My computer laptop detials:

  Note the model: HP Pavilion Notebook PC g6

  Model: g6-1320so

  So please help my problems, I don't know what to do?

  Thank you

  Hi @EID

  Thank you for your query.

  I understand that you did recently resumed, reinstall your original Windows 7 with the help of HP.  You were then installation updated drivers when the laptop froze and the only thing you could do was power, it works. You then reinstalled Windows 7 again, but can not install other programs or your personal documents.

  Have you tested for hardware failures? Screening of hardware failures (Windows 7, Vista )

  Have you checked against viruses and malware?  Malicious software removal tool

  Like you just HP support help with your original Windows 7 installation and the problem appeared after that, I suggest you contact HP support for assistance, especially since you have reinstalled again and are always problems.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Lenovo T400s problems after cleaning

  Hello

  I have a Lenovo T400s, which was full of dust, due to the high temperatures and the slow performance, I decided to clean the cooler all by myself.

  After carefully removing each part, I managed to reach the cooler and clean. I put up successfully each piece of hardware, with the temperature now to a maximum of 70 degrees Celsius in mode performance. Yet, there are a lot of questions that I am yet to repair:

  1. the overall performance of the laptop are slower than before, with the browser and all other apps clearly slowed by something, even after the start of the laptop.

  2. sometimes when I plug in the power cord, the laptop suddenly crashes. It happened to me several times during the loading of the operating system or when I was working on the laptop. After I cleaned up the laptop, I got an error saying "plugged in, not charging", but I fixed it by removing and the battery connection.

  3. the Bluetooth adapter doesn't seem to work. Whenever I try to connect a Bluetooth mouse, the laptop freezes.

  An idea about the origin of these problems and how I could fix them? Thanks in advance.

  I'm under Winodws 8 and the standard hardware configuration of the laptop, with no upgrade.

  
  

• my laptop stops after 7 min listening on netflicks, why?

  My laptop stops after having watched 7 minutes from NETFLICKS, why is it happening?

  Hi Deb,

  1. What is the brand and model of the computer?

  2 is the limited issue while watching specific videos?

  3. what version of Windows operating system is installed on your computer?

  This problem may occur because of display drivers.

  Try the following and see if it helps.

  Method 1:

  I suggest you to update the display drivers and check if it helps.

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Method 2:

  This problem could occur due to Silverlight is corrupt.

  See the following Microsoft article.

  Silverlight

  I suggest you to search for error messages that are described in the observer after return of information and events.

  Open the event viewer: http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)? http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-event-viewer

  Keep us informed on the status of the issue.

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• HP ENVY 15 l: I have a lot of problems after windows 10

  Hello

  I have a lot of problems after the update of Windows 10

  1 - what sleep mode the screen is not working! (I already tried to change the keyboard, but to no avail)
  2. the footprint does not work after the update!
  3 programs Microsoft Office cannot be installed after purchase! (Whenever you download the package, I get an error message)
  4 - when I walked in the updates (windows) tells me that there is an error message!

  Windows 10 home unique Language، (error)

  ....
  Please help me as soon as possible! I have a cousin reviews

  Hello @shySmile,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I came across your post about the problems associated with Windows 10 and wanted to help!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:

  How can I find my model number or product number?

  Try to see the next post to solve the problem of the Standby Mode. and let me know how it goes:

  How to troubleshoot upgrade Post-Windows 10 on HP laptops

  Can you give us more information about the print does not work after the update?  For your problem regarding the purchase of Microsoft Office, contact Microsoft Product Support.  To solve the problem with the update of Windows, try using the following tool found here:

  Open the Windows Update troubleshooting tool

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• AVG 2011 problem after 4 days of use got broken!

  Hello, I would like to have help please. My computer hp compaq nc6220 laptop has a named AVG 2011 antivirus which I use several years ago. After formatting my laptop, I install the first device controller and other antivirus in the laptop and it is now over. I run a scan of the original computer for more security for my laptop. After complete, it is now ok but after 4 days of use of the AVG 2011 the last stop and now AVG broke and it does not work properly, they said it should reinstall, but I did it several times in my other computer with the same problem as this. Can not reinstall because of some other issues. I come to the conclusion that this is happening because I have use a portable photoshop software. This has happened before because of this. So, please if you could help me, other computer geeks it and IT professionals help me...

  You need to ask in the forums of AVG.

• Computer Acer laptop failed after Vista SP1 update

  original title: computer Acer laptop failed after Vista SP1 update - help!

  I accepted an update from Microsoft for Vista SP1 on my Acer 5920 laptop. After re-boot to complete the update, the Acer is no longer wakes up. What happened and how I can fix itplease?

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Dell XPS Ultrabook 12 has network using WIFI connection problem after upgrade to Windows 10

  I have a Dell laptop XPS Ultrabook 12 that worked fine on Windows 8.1. When Microsoft prompted me to sign up for upgrade to Windows 10, I hesitated, but finally, I signed up for it. In recent months, I have been asked several times upgraded to Windows 10 but I just ignored and delay the update as much as possible, because I need to work with the laptop and I can't afford to have problems after the upgrade.  To my horror, Microsoft forced an install of Windows 10 this morning without allowing me to delay and just after the upgrade, I can't connect to my existing network. I have therefore no access to the internet and I am currently typing this complaint using another PC. I noticed that the laptop can connect to the network automatically when I walk my router but the connection will last only a few minutes, and then he'd cut off. I tried to connect and the message I get is "unable to connect to this network. I checked with "ipconfig/all", wifi said media disconnected. I checked with the Dell support website and downloaded and installed a newer driver, but the problem persisted. Apparently the surf on the internet, this problem is faced with a number and any suggestions to fix do not work (after that I tried).

  Help, please.

  You should be able to go back to 8.1 for Windows by following the instructions here:

  https://www.YouTube.com/watch?v=2Y3uc2FWlK0&index=3&list=PL1RkaknDn7v-w5LEVIDvTCvmKZ_1_NcZz