help me get this computer running right again

Similar Questions

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• Windows could not complete the installation. To install Windows on this computer, run the Setup again.

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hey Abraham G

  you use discs of recovery that are made for your brand and your computer model

  and if you have problems using the manufacturer's recovery disks, you will need to communicate with them about

  It's their recovery process not microsofts

  Walter, the time zone traveller

• «This computer running illegal Windows...» »

  In my laptop, I have a Windows 7 Ultimate since 2010 receipts through paid MS partnership program. Now I got messages like «this computer running illegal Windows...» ». What now? Windows 10 RELEASE?

  There is NO sign of any problem in the MGADiag report - which probably means that the issue is of a race condition.

  It is often the result of incompatible security software.

  What antivirus is currently installed?

  What other security software is also installed?

  What other AV has already been installed?

  Malicious software may also cause this problem...

  If please download and install Malwarebytes Anti-malware (free version) http://www.malwarebytes.org/products/malwarebytes_free/ - uncheck "Activate the free trial version of MBAM premium" at the end of the installation - and put to update, then run that a complete analysis of your main account and quick scan in user accounts.

  Quarantine everything he finds

• IAM trying to install Adobe In Design CS2 but only allowing the use of 30 days... Do you know how I can get this to run as needed?

  IAM trying to install Adobe In Design CS2 but only allowing the use of 30 days... Do you know how I can get this to run as needed?

  The activation servers have been closed several years ago. See Adobe - CS2 downloads

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily

• CREATE DVD WINDOWS STOPPED WORKING / CAN'T READ DOWNLOADED VIDEOS, I BURNED A DVD ON THIS PIECE OF JUNK AND NEVER COULD BURN AGAIN, IS WHY MICROSOFT DO NOT WANT TO HELP ME WITH THIS COMPUTER

  I DON'T KNOW MUCH ABOUT COMPUTERS I KNOW JUST THE STORE I BOUGHT THIS COMPUTER FROM IS OUT OF BUS. JUST LIKE ME I'M NO LONGER WORKS I WANT JUST THIS DVD PROBLEM SOLVED

  Hello
   
  The "WINDOWS DVD MAKER has STOPPED working" is a common error, and there are several causes for this.
   
  We recommend that you check the event log to find out what is causing the problem and view details of return.
  1. open Event Viewer by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click Event Viewer.
  2. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer
   
  After the details of the event log, so that we can help you better.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Whenever I try to open Outlook Express, I get this message: Run Time Error! Program: C\Program

  original title: cannot open outlook express

  I am running windows XP Professional

  Whenever I try to open outlook express, I get this message

  Run Time Error!  Program: C\Program...

  This application has requested the execution in an unusual way.

  Please contact the support team of applications for mor information

  I can not access my emails at all.

  Search for antivirus interference.  See www.oehelp.com/OETips.aspx#3

  If you can, open OE and click file | Identities and establish a new identity.  Then see if it works.  If you can not open OE to do this, then move all the dbx files to another directory of their current location.  To reset the message store, which you should be able to open OE then.

  Steve

• Can this computer run 64 bit?

  I'm going to buy a Dell Optiplex 745 and wanted to know if this computer can run Windows 7 Pro 64 bit.  Here are the specs.

  4 GB OF DDR2 RAM
  Processor Pentium D Dual Core
  750 GB hard drive
  ASUS ATI Radeon HD450

  Can only run a 64 bit OS?

  Also should I be worried even obtain 64-bit?  What I use my computer for is Minecraft, YouTube and Twitter.  I don't know the difference between 32 bit and 64 bit so if you could also explain that it would be greatly appreciated.

  Yes, he is capable of 64-bit:

  http://Ark.Intel.com/products/27515/Intel-Pentium-D-processor-915-4m-cache-2_80-GHz-800-MHz-FSB

  64 bit 32 vs

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Windows 7 64 bit comes in handy when you need to deal with at least 4 GB of RAM or more. Windows 7 32 bit can use up to 3.2 GB of RAM. Because the address space of memory is much larger for 64-bit Windows, this means that you need two times more memory than the 32-bit Windows to accomplish some of the same task, but you are able to do much more, you can have more apps open, do things like run a virus scan in the background it will affect the performance of your system. 64-bit Windows 7 is safer too, malicious code cannot easily infiltrate it, drivers are more reliable because they must be signed before it can work with 64 bit Windows 7.

  Regarding compatibility, you need device drivers 64-bit hardware devices, you may have. In addition, there is no 16-bit subsystem in Windows 7 64-bit, which means, your applications must be 32-bit only, not 16-bit Installer or programs uninstaller. Also, if you decide to switch to Windows 7 64 bit in the future, there is no way to upgrade from 32-bit Windows, clean install only.

• Have trouble getting this script runs on the 1 cluster and not others

  Hello

  I'm trying to get it to run on a single Cluster, currently I run it on a single host, but I would like to run on a specific Cluster.

  Get-vmhost host1.lab.local | Get - view). EnterLockdownMode() | Get-vmhost | Select Name,@{N="LockDown; E={$_. Extensiondata.Config.adminDisabled}} | FT-auto name LockDown

  I tried this, but this error message:

  (Get-Cluster 'Local' | get-view). EnterLockdownMode() | Get-vmhost | Select Name,@{N="LockDown; E={$_. Extensiondata.Config.adminDisabled}} | FT-auto name LockDown

  Error message

  The method call failed because [VMware.Vim.ClusterComputeResource] contains a method named "EnterLockdownMode".

  On line: 1 char: 51

  + (Get-Cluster 'Local' | get-view). EnterLockdownMode < < < < () | Get-vmhost | Salt

  ECT Name,@{N="LockDown"; E={$_. Extensiondata.Config.adminDisabled}} | FT-auto N

  SOUL LockDown

  + CategoryInfo: InvalidOperation: (EnterLockdownMode:String) [].

  RuntimeException

  + FullyQualifiedErrorId: MethodNotFound

  How can I run this for a single cluster and not the other clusters.

  Thank you

  Mike

  Try something like this

  Get-Cluster local | Get-VMHost | %{    (get-view $_).EnterLockdownMode()    $_ | select Name,@{N="LockDown";E={$_.Extensiondata.Config.adminDisabled}}} | ft -auto
  

• Help I get this error BEX and my game stops working, the game is called autonomous Dayz as you can see in the name of the application.

  I get this error message for my game. It starts well, but when I'm playing for about 5 to 7 to 10 minutes would make it stop responding so I looked more into it and found some info on what it is

  Problem event name: BEX
  Application name: DayZ.exe
  Application version: 0.47.124.641
  Application timestamp: 53d6411b
  Fault Module name: StackHash_0a9e
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 00000000
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 2057
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Try the solution in this link:

  http://segmentnext.com/2013/12/18/Dayz-standalone-crashes-errors-freezes-update-server-and-fixes/

• WD passport external drive breaks down computer hp amd athlon, vista 32. Get the computer running again after that 3 full restores.

  Have wd passport, it blocks the computer, (blue, white, green screen screen), the problem started when I tried to update the wd software from windows update, partially backed up files? Afraid to fix the unit on my computer I had to do 3 times system restore to return the computer to life a little somehow... but don't trust him more. A defender analyses and analyses of Kaspersky on wd drive and software, computer, crashed... again... and again. He is back on? So do shred computer and buy a new one? This is similar to what killed my Dell a few years ago... only without connection... computer external hard drive is HP (compaq cq60) AMD athlon x 2 64 vista 32 bit nvidia graphics (paralyzed, unable to start the control screen). No disk Windows vista. I think I have backup and restore disks but not enough savvy to use computer. Checked with computer shops, the Bill to fix is more than some new computers... 3-400 dollars.  At end of rope here, want to throw all this stuff of high technology on the window (pun!) and get back to newspapers and mail.

  Hello

  I suggest you run the fixit and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Also check the external hard drive for bad sectors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  It will be useful.

• I have a router Linksys WRT54G, a flashing power LED, and it does not connect what either. I downloaded a bin file from Linksys, but cannot open it. Can anyone help? I try to get another computer running for my children. Thank you

  The router will not connect to my computer. He repeats to me check the connections. They' fine rev.

  Hi Tweetytewe,

  This occurs on cable connections and wireless? If this happens on cable connections and wireless and your Windows installations are fine, you should contact linksys support to receive the best support.

  http://www.linksysbycisco.com/US/en/support.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Help me get this annoying popup program off my computer.

  I recently downloaded a program called FixCleaner to "expedite and improve the performance of my laptop." I had a problem with the download of latest version of iTunes and after Internet searches on how to fix your manual tools, a link in my search engine came with difficulty Cleaner. FixCleaner did nothing because he claimed so for me and my laptop. I want to take care of my laptop. After clicking on the button ' repair all ' on the difficulty Cleaner program, CF asked me to buy all packed. I don't have. I left quickly out of the program. If, after that, I went to my control panel and I uninstalled the program. Everything goes well at this point. However - the next time I reopened/turned on my computer, I saw the difficulty Cleaner home screen asking me to fix everything. To my knowledge, I've uninstalled it successfully the program. Why is it still on my computer? Someone help me please. This will really bother me if I can't do this thing on my laptop completely and forever.

  Try to do a system restore before installing the program:

  How to make a system of Restoration of Windows 7 or Windows Vista...

• I had a virus on my computer acer laptop and thought restoring factory setings it would solve the problem. It wiped everything, including my computer windows. How can I get my computer running again and what I look at?

  the screen that appears whenever I start my computer says "windows boot manager, windows did not start." a recent hardware or software change might be the cause.

  fie: \windows\system32\winload.exe

  status: 0xc000000e

  Info: the selected entry could not be loaded because the application is missing or damaged.

  A factory restore should you restore your computer to its state when you bought it. If the factory restore did not work, you have to be a problem with the hardware or the original image. Do factory restore using the recovery disks, not the recovery image on the hard drive. Alternatively, you can contact Acer technical support about the error since it is their original which has been restored. MS - MVP - Elephant Boy computers - don't panic!