Help me!! PLEASE, I BEG YOU!

Similar Questions

• 63 error DataSocket write in getWavelength_v80 EDITED.vi, help? Please, I beg you!

  Hey guys, I'm new to LabView and I myself thought about all I know.  I am a student at NC A & T.

  Good so I took a piece of code that I acquired Bristol, and it's for a Bristol Wavemeter V1.22.  First, I edited to get a graph in there to display the data and get a slope and the intercept.  Now I try to connect it to a computer that controls a ND6000 COntinuum.  We have the existing code for the ND6000 that allows to connect the two computers.  I took the code there which was the part that connects and now when I plugged everything up, I get the error "error 63 occurred at DataSocket write in getWavelength_v80 EDITED.vi" message.  He says; Possible reasons:

  LabVIEW: Serial Port receive buffer overflow.
  =========================
  LabVIEW: The network connection was refused by the server. For TCP/IP, make sure that the server is running and listening on the port you want to use. Firewalls can also cause a server to refuse a connection. To VI Server, make sure that you have enabled the server from VI tools > Options > VI: setting up the server. »

  I tried making sure that everything in the configuration is correct, and it is.  Can you guys please help me?

  Thank you.

  I have attached the folder located in because you don't have to have the library feature.  The file is located in the example of wavelength of Bristol meter V1.22\Programming Interface\LabVIEW I.

  Thank you once again!

  Then I realized the problem and it was because I didn't have the DATASOCKET SERVER running when I was running the program... Thank you guys for help

• 12 elements will not reinstall. error message 2343 specific path empty. Clean computer after the accident. Have serial No. Help! Please, I beg you.

  I'm trying to reinstall 12 elements. I had to clean my computer after a crash.

  This is a saved copy and I have the serial number.

  I downloaded the 2 files by following the instructions but cannot install.

  I get the error message is Error 2343 "specific path empty.

  I had previously uninstalled all Adobe files on the computer.

  Can someone help me please, I'm desperate,

  Thank you, Geoff

  In this case, you can try manually deleting registry keys.

  Well Yes, since the date or purchase, you may return the product within 30 days, I guess. You can go ahead and buy the upgrade 14 items. Same Support from Adobe can help you with the installation process, they can access remotely your comp and install the application for you.

  Please refer below link;

  Return, cancel or change an Adobe order

• Early flight, need help! Please, I beg you!

  I've updated my iphone 5 c for the latest softwear and now have forgotten my password. I am able to connect to my icloud to select Reset my phone but could not complete the reset bc, I can't my phone to connect to the wifi bc its coastline. I don't have a model to coonect it. Need help please, I have an early flight and need my phone to work!

  What follows has instructions for all methods: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Unable to send arbitrary signals of CC. Help. Please, I beg you.

  Hello people,

  I am a student of Btech working with Labview 2013. I managed to generate an arbitrary Signal through Labview 2013 version for my project. Now, I need to send the signal to Agilent 6642 power supply dc to ampilfication and it will be used for my experience. I am facing problem here.

  I use GPIB USB HS to send the signal, and when I send commands * IDN, is successfully reading and writing, which means I have all my software and drivers installed perfectly. I have installed in my pc control expert and NI MAX.

  I did a program (which is attached) in labview and the GPIB seems to read (signal ACTIVE/Green shows when it is executed).
  But I do not see it in the oscilloscope (Tektronix TDS 2024 B) which means something's wrong here. I need to see the signal as shown in the attached picture.

  I am new to labview and don't know much. Please help me with the Labview program as I want to see the signal in the oscilloscope as well.

  If a command is needed, let me know the order.

  I'm stuck. Help, please.

  Thank you.

  
  

• Generation of pulse type signals cannot be done. Help. Please, I beg you.

  How can I generate a computer signal in labview software but using is no DAQ?
  I need a continuous impulse which is essentially increasing and decreasing slowly WRT time. i.e. it is a pulse, it is already given in labview simulate signal option. I need the DC signal which can be will be the merger of more than 2-3 signals.  Please help me with the solution, if possible, or any solution as soon as possible.

  The image of the pulse is attached.

  The link of the pulse is: file:///C:/Users/Priyabrata%20Saha/Desktop/internship/pulse.JPG

  Have you tried "simulate arbitrary signals"?

• Need a help. Please, I beg you. the project long render times.

  Hi there everyone!

  If im new in the world of Adobe AE. I need help. Watched a 100 videos and searched, but... I did an audio visualization for my youtube channel and want to restore the mix of 50 min. My PC config is 8 GB ddr4, skylake quad intel. GTX 960 m. Then, when I try to make it take so long! 24 seconds to display a preview is about 5-7 min. and for 50 minutes, it would be around 7hours! my laptop from heating even after 7 min of render. How can I speed up the rendering, and I have to do with the size of the video? I made in adobe encode. h.264 - 8 mb full HD - advice read on youtube too for the best settings. People please help

  Have a great day and tons of positive emotions!

  Unless your 50-minute video is one-shot with effects applied to the same shooting and there is no cuts nuts is to try to do this in a single computer in AE. According to effects applied to only one made of several minutes, that a framework can be normal and expected. The usual workflow for a project of 50 minutes would be to break into small pieces, if the effects on each segment are complex or very slow return, then you make each room when this is done. If the effects are simple and fast make you can consider using Dynamic Link to each piece in Premiere Pro for final assembly. More than 90% of my comps AE are less than 10 seconds, because most of the shots in the films that I produce are less than 10 seconds. Several times my compositions contain dozens of layers and can take up to four or five minutes a frame to render. Most comps are effectively created composite or motion graphics restitueront at the rate of 3 or 4 frames per second. Nowadays about half of my work is 4K, and I produce masters 4 K that are made to the HD for final delivery using Adobe Media Encoder to create an h.264 MP4.

  I'm just guessing that you have very long shots in your comp with a sort of music visualizations. If this is the case, every time that the music changes or there is a break, you break the project down into a separate model and then make this model in a lossless format visually. Because your system is currently taxed I would use the Cue Render to render these masters of the production. When you have all the parts made I would bring them together in the final project in Premiere Pro, which is the only way you'll be able to get an overview of real-time editing. Then use Premiere Pro to make the file available. This will save you time in the long run because rendering Cue and the output module will make faster than Adobe Media Encoder because TEA running AE in the background to do the rendering, it is less effective. The probability that a rendering of 50 minutes will fail repeatedly during rendering is very high, if all this makes your system resources. This will also give you time to check each section to see if you like it before moving on to the next section.

  I hope this helps. I would never and have never tried to edit one to animate a sequence in AE who was only a few minutes longer because it is simply too inefficient. I put a whole feature in AE to make color correction, but he is already gone and it is a layer that already went to a master of production. Therefore, unless all your effects are applied to a single video track for 50 minutes together, break the project and make it into pieces.

• Help! PLEASE, I BEG YOU!

  I just bought a new computer, but my photoshop and my lightroom were on my old computer. Is it possible to move from my old laptop to my new laptop? Or if I buy again? I have an account with adobe.

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• a little help! Please, I beg you!

  

  Please check error: "Setup cannot initialize ' | Windows

  Hope this will help you.

  Kind regards

  Hervé Khare

• My lightroom 3 is updated. However, I bought a Canon 7 d Mark II and shot the FIRST... Now cannot get the CR2 files to load into lightroom... Help! PLEASE, I BEG YOU! Thank you!

  I recently bought a new Canon 7 d Mark II camera. I shoot mainly in RAW... However, I am owner of Lightroom 3... It is current version 3.6... No matter what... And it does not recognize the files... said 7DMIIs that they are "unrecognizable or are damaged. Can I covert them to JPEG using a converter of files... but this is a wedding I deal with in raw... what Miss me? I even downloaded the new free trial version of lightroom to try for 30 days... still nothing... Help, please!

  Suggest you convert CR2 raw DNG (Adobe) or purchase LR6. You can get the latest DNG converter for Windows or Mac 9.1 from following link. DNG files will then work with your current software (keep your originals as backups and for use in the software of the camera factory)

  To download click here-DNG Converter 9.1

  You can convert an entire folder of images raw with a single click. See this quick video tutorial:

  You Tube click here for the DNG Converter tutorial

• Why does my calendar disappear? Help! Please, I beg you!

  So here we are again.  When I drag down what to the timeline, it turns black and disappears until I do a file/save.  I am totally perplexed and frustrated.  I thought I solved the problem by buying an ATI RADEON HD4350, but it does the same thing even with the new video card.  I have a processor intel core i5, am running windows 7 and 8 MB of ram.

  Please someone help! I'm about to pay the $39 technical support to see if they can fix it... and I'm not optimistic that they can... UGH!

  I enclose photos of what happens... top pic is before I do drag... bottom is me drag an image down... as you can see, the display disappears except for article, I am dragging...

  opusf15

  There are a few posts on something similar to this just now, saying have a browser open can cause problems. Take a look at

  http://forums.Adobe.com/message/2981942?TSTART=0

  and there was something on the cow, which suggests that perhaps a graphical refresh problem

  http://forums.CreativeCOW.NET/ReadPost/3/902652
  Unfortunately, no one seems to still have developed a definitive answer.

• Need help. Please, I beg you!

  Hello world. I have a M17X R2 with bi - gpu HD5870M. I want to know how I can test the motherboard to see if his work? I get no signal on the screen, black screen and nothing on the external port (hdmi or vga). I don't want to buy a gpu and then if its still works do not buy a motherboard. The beginning of the laptop, the keyboard becomes power and the alien logo over the head on the upper lid. Load is no problem. It has 4 GB of ram. If the two are connected nothing happens. If only 1 RAM is connected then I get a flashing capslock and Numlock. Any thoughts? Ideas? I can hear the hard work and when I stopped the laptop it takes a few seconds. Tried to switch between GPUS and still no job change (perhaps the two GPU is dead). Or? Help, please!

  Is the product under warranty?  If not it honestly might not be a bad idea to send to Alienware for repair or at least to get a quote on their part.  Its probably the motherboard at this stage, but in reality, it could be many things.  It could be a trip expensive to know what is the problem with him almost blindly replacing components.  I see everything possible to replace the motherboard and still be at square one after spending the money to replace.

  More information on warranty repairs:

  www.Dell.com/.../en

• BlackBerry smartphones HELP! Please, I beg you! my phone cannot download applications

  Everything worked and now whenever I try to download an app, it starts to download and then he said: "there is a mistake... ect..". I don't even have facebook app and I could download games but they are not lance upward when I click on them! Please someone help me because I really need some apps! PS I am a user of Torch 9800

  Resolved, I went to my operator and asked to have my phone wiped and installed each unique certificate and the thing again. Everything works perfectly now!

• I just trid open creative cloud app and it ask to connect and when I do it says that I was disconnected. Can anyone help? Please, I beg you!

  The main application of creative cloud has started to act. Whenever I am trying to connect, he said while I'm out. I can always open applications where else and I can you line. It's just the application of cc. Does anyone know why this might be? Everyone knows the problem? I use win 10.

  Hello

  Please see the thread: error "You have been disconnected" whenever I try to connect to the Cloud creative office application.

  Please let you still face problems.

  Kind regards

  Shelly

• My Flash does not work... Help? Please, I beg you!

  I use the most recent update on windows 10 on a computer laptop lenovo... I did a test of DxDiag but I don't know how to read or find the question myself. and I have uninstalled and reinstalled the player. When the installation is says there is an installation problem and that I have a flash already installed but I know that it is not true that I uninstalled before hand. Any advise?

  Could you copy and paste the content of your dxdiag report thereon?  This is a text file, so you should be able to simply open it with Notepad.  My best guess at this point would be that it is audio related.  Please see this thread for more details.

  Re: Adobe Flash/Shockwave crashes immediately in all browsers WINDOWS 10

• After you turn off the root of the directory utility user, I went back to the main screen and all other user accounts showed is no longer at the start, as they were before you enable the root user.  Help.  Please, I beg you.

  I have activated the user 'root '.  It was an attempt (for the sake of granddaughter age) to check its history since I am the administrator.  Realizing that this method was much more complicated than what I am capable of managing, I returned the utility program directory and disabled the user 'root '.  I thought that everything was ok, as I did not made anything while connected as user 'root '.  Instead, restart the computer, all users, including myself were no longer at the start.  The only point was a blank user name and password.  No picture.  No guest.  No user.  How to return those and I did something to cause this?

  Else you being logged in as root?

  Activation and deactivation, then root should not have caused that.

  Also, having allowed root is one of the ways you get a login screen showing only the name and the password.

  You should be able to type in your user name and password to connect.

  One time connected, check users & groups system prefs, Connection Options and make sure he's on the list of users. You will have to click on the padlock at the bottom to make changes.