Help me to solve the problem with modem hspa usb on Windows Vista and Windows 7

Hi, I have a problem with my USB HSPA modem when I tried to install in my Windows Vista 64 - bit PC. Sometimes it's OK, but sometimes it has encountered an error trying to install it. After the installation of the almost complete progress, reports of windows as "Unknown material" or "driver is not found. Maybe after a few tries, I was able to install the modem. But later, its happened again. I take the modem at the other PC with XP, it is still OK, but it happened again with Windows 7 Ultimate 32-bit home version. so could you help me to fix it? is it a bug of Windows Vista and windows 7? Thank you very much

Hello

go to the website of modem manufacturers and look for the last vista and/or firmware for windows 7

Tags: Windows

Similar Questions

  • Need help to solve the problem with the margin at the bottom of the converted pdf file.

    Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

    Hi jerrio1949,

    There is no way to change the margin, you settle back into your original file & then convert to PDF format.

    Kind regards
    Nicos

  • How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

    How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

    It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

    Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

  • The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

    The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

    Hello

    Control Panel - SOUNDS - Audio peripheral devices configuration-manager

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
    the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
    Just make sure that the version you have installed appears in the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
    and show disabled devices - check your micro - highlight them, then lower right properties. Do
    of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
    and APPLY / OK changes.

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Need help to solve the problem with worm:win:32 / cridex.e

    Please help me to solve this problem worm:win:32 / cridex.e

    Hello

    Scan of Malware in Safe Mode with network.

    http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    Once in Safe Mode with network, download and run RKill.

    RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

    http://www.bleepingcomputer.com/download/rkill/

    Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    See you soon.

  • Log file of NOD32 which can help diagnose the problem with svchost.exe, WScript.exe, mshta.exe and windefender and update please someone help does not!

    HHmmmm bears ok I will answer your questions, but I don't really see the relivence of them for the progs anti, spy, virus, malware are not the problem.

    (1) a little more than two or three weeks ago or not.

    2A) about two weeks ago.

    No. 2B) I don't buy anti progs that do not work. Why would I? He did not set the blocks just prob the random load IE 8 to a maleware site addresses.

    (3) I got the updated version of Avast for almost two years. He simply blocked addresses saying something was trying to use svchost and WScript mshta.exe to attempt to load IE to a maleware site. I disabled Avast but since the installation of NOD32 if she does not interfere.

    (4) I don't remember what I used before I think it's Norton or macafree but I don't know about two years ago, I had the computer taken, wiped and reinstalled windows and they gave me Avast for free.

    (5) Yes, I tried Norton and Macafree, and they do not work to correct the problem. I uninstalled them well and they are no longer on my computer.

    (6) no they were not preinstalled.

    If you're going to ask me to do a system restore it will not help I already tried. Useless program when you can't use it. I tried several times with different dates, even in safe mode. I already ran on Microsoft Live Onecare, MSRT, Fix and MSE. I have spybot, malwarebytes, superantispyware, synematic and have tried them all. Nothing can solve the problem. Now NOD32 blocks the random addresses loading IE but it is very annoying seeing this thing pop up constantly. The only thing that it does not stop is when I use IE occasionally it will load a location for a Wal-Mart gift card, but I've just close it. If I use a different prog or any it constantly blocks the random addresses loading IE. I don't have IE loaded. Yes I have popups blockers, but it does not block another page being loaded on the card gift wlmart site. everything else works well.

    Please don't give me no matter what more links to the help pages for Microsoft because I already looked through them all and tried a lot of useful advice and none have worked. What I really need Bear is a set of instructions on what or the files to search posibly containing a script that gives orders to the system files to try and load IE maleware sites. I need to know where to look, what I'm looking for and how to rewrite or erase the command or script. Probly get rid of some files HKLM or commands too if there are orders as well. I'm sure you'll tell me its probly in both registry keys. in any case if you can help with a set of instructions on how manually enter and take care of the problem that would be great.

    I have seen the manual of instructions on how to repair scvhost.exe but I'll not go messin' and delete this file cause I know that you need so that windows run. I'm sorry for the poor fools who go on Ehow and follow the instructions. in any case if you can help it would be greatly appreciated I don't have the money right now to put this thing in the shop with Christmas around the corner and all. Peace!

    bear oppss sorry I forgot to say of windows has been completely updated in time and yes I was able to connect to windows update and defender update as well before that happens, but now I cannot connect to a, but can connect to anywheree else apparently on microsoft or other juice of sites not not both.

  • Everything has been done to solve the problem with the FileVault have to be disabled in order to get the lights on the keyboard turns on at startup on the macbook pro?

    Everything has been done so far to solve the problem associated with the FileVault have to be disabled in order to get the keyboard lights turn on at startup on the macbook pro?

    I use FileVault. The keyboard on my MacBook Pro lights work perfectly. I'm under El Capitan 10.11.3.

  • HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

    Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

    Hello
    If please try following the steps below and check if this can solve the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7. run the installation file and check all difference.

    Kind regards
    Shlomi

  • Comcast has a new IO program to solve the problems. It displays a 401 error code and will not install

    Comcast is offering a new PROGRAM to solve the problems of internet connection called.  My computer it does not open.  An said Comcast error code 401 error code.  Does anyone have an idea why it won't work?

    What internet connection problems that you think you are EasySolve of Comcast could correct?

    Related...

    http://www.broadbandreports.com/forum/r27178355-Comcast-EasySolve-

  • How to solve the problem with Windows Update on Windows 7 64 bit Home Premium SP1; Module Windows install encounter error 126, impossible to run/scannow sfs or TrustedInstaller. Help, please

    Hello

    First of all, thank you in advance for any advice for any help, you can offer.

    A week ago I noticed that Windows Update had a backlog of updates (30-40) as I had it value updates but let me choose whether to install them. As I tried to install, I noticed download election for hours but no visible progress in the taskbar and only a few updates installed on restart. Try to check the updates of similar results. I tried a number of solutions suggested here as a tool for troubleshooting Windows Update, but it made that seem to clear my list of updates to uninstall and make sure Windows Update has been under the impression that I had never checked the updates, apparently a worsening of the problem like today no update appeared and I encountered error 8007000D.

    I've tried other options like Windows system update readiness tool and tried to run the sfc/scannow System File Checker, but what who would not (cannot start service repair) I grew more and more worried. On recommendation from other forums, I tried also to start TrustedInstaller in command prompt, which does not. Unfortunately, I had run a Disk Defrag and clean-up recently which had been deleted and (unbeknownst to me) my last restore point. The root of the problem seems to be the Windows Modules Installer, which does not start when you are prompted in Services (error 126), something wrong with the registry may. So reluctantly, I tried to perform a repair installation using a downloaded iso, I burned onto a DVD (insured was also Windows 7 Home Premium 64 - bit SP1). However, even if it doesn't seem to work, it is constantly check for installation updates (unless this is supposed to last several hours?) or if I opt not not to check, it pass the compatibility check and then fail in the second stage (collection of files, settings, and programs). I tried several times, once in offline mode with my disabled (Norton) antivirus and once in clean boot mode.

    I don't know what other options I have. I would like to avoid a clean as much as possible installation, because my computer (HP laptop) still seems to operate normally (for the moment) outside the impossibility to install Windows updates (via Windows Update or directly from Microsoft, it seems), but I think it would just leave vulnerable more and more over time. Has anyone else had similar problems and has found a way to solve? I'm not a computer expert so any help would be greatly appreciated.

    Hello

    Try the troubleshooting steps in this link: error message when you start the service installer of Modules of Windows (TrustedInstaller): "system error 126: the specific module could not be found".

    Let us know how it goes.

  • How to solve the problem with the BSOD errors of memory?

    Original title: Windows 7 BSOD "memory management".

    So basically, I made a similar post about 3/4 weeks ago and only received assistance to a certain extent.

    My problem is that I get a BSOD "memory management".
    Dumps are here for you to watch (you need to perhaps copy and paste the link in your URL):
    https://SkyDrive.live.com/redir?RESID=871E879B9D5671EC! 186 & authkey =! AL1N44iVMCM3JFw

    My OS is Windows 7 Pro.

    There are a few changes I made in recent weeks. Before, I had a Netgear USB wireless adapter and when I had that my PC had this crash at least once a day. But I now have a TP-Link wireless card. However, my PC crashes again every 3 days, no more and no less. Weird huh?

    Record PC hardware:
    Power supply 650W Powercool,
    Motherboard Asus M5970 Pro
    AMD processor with Six cores bulldozer 6100 3.3 GHZ
    Corsair Vengeance 8 GB 1600 MHZ RAM.
    Western Digital drive hard 500 GB.
    Western Digital 250 GB hard disk
    SAPPHIRE RADEON HD 7750 1 GB graphics card

    I also tried to buy the new RAM, but this did not improve the situation. I still had the accident itself, so I changed back to my old RAM and got a refund because the question is obviously not with the memory RAM (so please not a single mention to run the memtest).

    In addition, with the second disc HARD (250 GB) connected inside with my XP on, sometimes I hear it make a noise as if it is off, which is obviously because of the PSU not put enough power, I read about the BSOD memory management can easily be solved by upgrading the PSU and just want to collect some more experienced opinions before eventually trying this , I really don't want to buy a whole new PSU and then send it again that the problem is still happening (like I did with the RAM).


    I arrived at my own theory that perhaps I may need to lower the frequency of the RAM in my BIOS, or maybe overclock. If someone could help, it would be great. Thanks to all in advance

    The trickiest part is the every three days, not more not less. I shouldn't have overlooked than before.
    This could possibly come from a program that tries to access Windows or the
    Internet in this time (automatic update?). Perhaps something to do with your wireless network card, or even something like your anti-virus.

    "Hmm maybe it's the question then? the RAM is running at 1600 mhz, and even if my processor is a 3.3 Ghz, it is still running at 3.6 Ghz (even if I haven't myself)"
    Ooops sorry :) - looks like I got confused somehow your message with one using a Phenom 945.
    Your processor can execute with a max of 1866 Mhz RAM, but your mobo still has a 1333 Mhz max
    If the system is not what OC'd
    The 3.6 Ghz is "turbo" (auto overclocking) processor speed. If the speed of the cpu is still at 3.6 Ghz
    Perhaps because of the RAM being set at 1600 Mhz. If you set the RAM by default in the BIOS, it won't
    stop the cpu of the use of turbo mode when he needs extra grunt.
    It is also possible (I have not used a processor with turbo, then only speculate) the cpu OC is the RAM at 1600 Mhz in turbo mode.
    This could be checked if the speed of the RAM is the default value (which would be 1066 or 1333 Mhz)
    in the BIOS.
    The mini dumps have nothing conclusive. That there is a memory management problem. They suggest a possible driver conflict but cannot identify the driver.
    A possible such driver comes with Daemon tools. If you have Daemon tools installed, then
    the link below shows how to get rid of the driver.

    BSOD in the use of the high memory, fltmgr.sys - Windows 7-Forums

    A msinfo32 report is usually suggested to be included with the mini dump and can
    reveal something more.

    .

  • updated eligible for adobe to solve the problem with the brushes?

    As you know I tryinf to find a solution to my problem with Adobe Photoshop cs5 Extended version with updates more recent - I ve you have a problem with sight corectly overview of brush on my screen and bugs with it - always changing cursor used, exactly this:

    http://www.YouTube.com/watch?v=UAwav8h41o0

    I already have contact INTEL:

    Try to find some updates to my video card: INTEL HD GRAPHICS 3000

    But on El told me that it isn't their problem and they're going to do not help me, they told me that I need to contact APPLE.

    So I contact apple:

    Apple told me that they have no responsibility to 3rd party like ADOBE and their software company: Photosohp CS5 and they me as well as I need to contact ADOBE.
    OK, I try out adobe:
    but I can't find some contact on official site-e-mail, where I can deteailed describe my problem, so for that I'm trying to find information through the forum of the community here:
    PLEASE IF CELA READ SOMEONE FROM THE TEAM OF DEVELOPERS OF ADOBE:
    Can you give some advice how can I solve my problem?
    Thank you very much

    Wait 10.7.3 out. The rumor that the bug to Apple graphics driver for the Intel 3000 has been corrected.

  • Please help me to solve the problem of the icloud blocking...

    Hello

    My girlfriend can't activate the iphone locked 5 as she forgot her password to icloud and also answers to secret questions... She just remembers his apple ID, birth date, and access to the e-mail of recovery she provided creating his Apple ID... Is it possible to recover her icloud password or unlock his account icloud with these data?

    Go to https://getsupport.apple.com . Click on "see all of the products and services ', then 'More', then 'Apple ID', then 'other Apple ID subjects' then 'security issues forgotten Apple ID". If you have problems with this test of this form: https://www.apple.com/emea/support/itunes/contact.html

  • How to solve the problem with the Gmail password that worked before and works online?

    1 thunderbird worked very well with my Gmail account for months, then was unable to send a message, but can still receive messages.
    2. I asked me to re-enter my password and it has not fixed the problem.
    3. I went to Gmail online and connected to verify that my password has not changed. Success.
    4. I have reset password in Thunderbird, but still could not send test message to myself.
    5. I deleted the account in Thunderbird. I then added a different Gmail acct that wasn't in Tbird. Success. Then I sent the test email, success.
    6 then I added the original Gmail acct, failure! He finds the correct settings automatically, but when he tried to check the password, it failed. I repeated to enter the password several times but always failed.
    7 WIN7 64 bit HP, Tbird 24.4.0
    8. all other AOL accounts work fine on Tbird.

    Authentication using two-factor with this account? and ask for passwords? as it seems!

  • Help! What is the problem with my rocket?

    I got my rocket radio play when it is cut. Now the ring around the scroll is turned on but the screen went black. What does that mean? What should I do? How can I solve this problem?

    Thanks, fixed it.

Maybe you are looking for

  • Satellite A80 - problem of product recovery

    Hello world! I have my Satellite A80-144 for almost 4 years now, but now my baby seems to be not more happy and were on strike. I have used my product recovery DVD-rom in the hope of bringing back the good old days No go! What are the lost areas warn

  • Is it possible to install WIn7 on Equium A200-1V0?

    Is it possible and how to do it? I already have an a * e to install xp, so I thought I could really a * e things going win 7. I never touch Toshiba laptops again, I've never done worse, it was to buy this. I never met anything so hard in my life. I n

  • Power AC Pro yoga 2 compatibility

    I just got 2 Pro Yoga, I have also more old Thinkpad 65W 20V power supply with one cable conversion electric Slim ThinkPad, so it will fit, but is it OK to use? All specifications correspond except my new Yoga 2 adapter has no power in this matter. T

  • I forgot my password of user login. How to get in & change?

    Login user password I forgot my password of user login. How to get in & change?

  • ORACLE WORKFLOW - HIDE ACTION HISTORICAL REGION

    HelloI have a requirement of the company, that I've created a workflow custom via Oracle Workflow Builder.I want to hide action historical region.I go through the Oracle Doc:https://docs.Oracle.com/CD/B14099_19/integrate.1012/b12161/defcom35.htmTo re