Help motherboard D10... PLEASE

I got this motherboard from outside of ebay. I thought he had two 8pin & connector 24 pin for power supply, I now see that the connector next to the main 24pin is a 10pin. I don't have the power supply provided in these systems was ryin to Thermaltake us1000w. I have two 8-pin connectors for power instead of the 10pin used on Delta power supply in these. Also, while looking into obtaining this advice have pulled up, I noticed a few mentions on the power supply diagnostic lights. The absence of this diagnostic configuration would keep the validation jury? When I try to start the system fans spin for about a second and then stops. The power led remains lit, but any other power seems to be cut as wel as the power supply, because the fan is not spinning. I got this power supply used and I know it cuts, but I have not tested under any load. He couldk wellbe my question, but I really am trying find out if there is any reason that this Council would refuse to post without being attached to the PSU oem? Or maybe the absence of another link (such as temperature sensor)? Does anyone have experience with this Board and the PSU afermarket? Or know anythin on the pinout of the psu and weather any deviate son of the game? I have a pair of x 5460, that would be a killer combo with this Council, even if it is a little dated. I did turn them in a poweredge 2950, but I need something with video options that are not only available with this configuration.

No offense to anyone, but please do not power of basic troubleshooting suggestions. I'm really looking for some information from someone who has had experience working with this material out of the reach of the inaccurate textbooks that are available.

Well, I went on the Thermaltake PSU for a XFX PSU and it displayed with one x 5460 I had installed. I plugged the connector 24 pin and 2 connectors 8pin to 8pin and 10pin on the motherboard connectors. As other comparable boards use 2 with 24 connector 8pin connectors pins I think it should be safe to ignore account PIN extra 12v on the 10pin connector. I hope this info is useful to someone else, like me, who has met one of these tips for a good price and are already equipped to use.

The next step is to install Win7 and see if I can run a pair of 260 gtx in sli with HyperSLI. In fact, I intend to get a decent map of Quadro FX to Midway for use with solidworks, etc. and find a better option of game use moderate to replace the gtx 260 with. Suggestions for compatible cards? Bios hacks?

Tags: ThinkStation

Similar Questions

  • I NEED A DRIVER for MY OLD BENQ DVD DD DW 1650 HELP if you please.

    I NEED A DRIVER for MY OLD BENQ DVD DD DW 1650 HELP if you please. I would like to burn DVD & CD

    I would go as far as to say that you you need a third-party software to burn the DVD. XP should be able to burn CDs, but I recommend the use of third party for both DVD and CDsoftware. I hope that this will have been provided with your PC and/or an optical drive.

    Keep away from products of packet writing if you can (for example, Nero InCD), I found that it is a very reliable way of writing optical media.

    Tricky

  • Help the moderator please

    Help the moderator please delete a post...

    OK, it has now disappeared.

  • I was told that I have to disable my account from my PC to add to another computer... I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

    I'm trying to load another computer with CC, I was told that I have to disable my PC mine.  I did once before and lost a lot of my images from LR, suggestions on this please.

    I do the LR back ups system too.

    Thank you very much

    PAM

    Hi goaliemom

    There is no way to disable CC products. When you enable a CC product on another computer, simply connect to Creative Cloud.CC will ask you if you it will activate on more than 2 computers.

    I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

    On the computer on which you will see that your images are not displayed?

    Catalog check the most recently used file > open recent in Lightroom

    Try opening a recent backup made on your newly added computer

    ~ Assani

  • Hello good I would like to cancel the annual plan of adobe audition, because I had problems with the software and the Bank, if I can help with this please.

    Hello good I would like to cancel the annual plan of adobe audition,

    As I have had problems with the software and the Bank, if I can help with that please.

    Please contact customer support for cancellation & refund of the next purchase. Contact the customer service

    Creative single-app cloud membership for Adobe Audition (one year) Subscription Office March 11, 2015

    In the case of any questions, please let us know, I can certainly go for you.

    Concerning

    Baudier

  • Help! CC of PHOTOSHOP: I want to reproduce the same project more than once and to modify their dynamic objects linked separately as different projects - can you help me? Please

    I want to reproduce the same project more than once and to modify their dynamic objects linked separately as different projects - can you help me? Please

    If related files please consult are located next to the file that contains the duplicate folder and edit files duplicate so corresponding should translate into changed content in the file duplicate.

  • Help me! Please give a DVD or ISO link restore Sony Vaio VPC-EA21FX. Thanks and greetings

    Help me! Please give a DVD or ISO link restore Sony Vaio VPC-EA21FX. Thanks and greetings

    Hello

    Looking for recovery discs?

    You can buy parts from Sony recovery discs and accessories team:

    https://servicesales.sel.Sony.com/Ecom/accessories/Web/contact_us.jsp

    Authorized Sony parts distributor:

    http://eSupport.Sony.com/us/Perl/support-info.pl?info_id=927#place_order_9

    However, this computer comes with recovery software, in a hidden partition. The recovery discs can be created using VAIO Care if the recovery partition is available. The steps are listed on the link below:

    https://us.en.KB.Sony.com/app/answers/detail/A_ID/35865/c/65%2C66/kW/35865

    Alternatively, you can perform system recovery using the key "F10". Restart the computer and keep pressing the F10 key. If you are able to access the recovery partitions, follow the instructions to restore the computer to factory settings.

    Press button to start edit, select start Recovery Wizard option and click on skip VAIO Care rescue (if you do not want to back up data) to start the system recovery process.

    If my post answered your question, please mark it as an "accepted Solution".

  • NEED HELP URGENT! PLEASE, I'M DESPERATE!

    First of all, I would like to apologize to the moderators and admins to repeat my request but I placed the first post in the wrong category and I posted the same thing in the category of recovery to have an admin lock! O_o I really want to have a discussion open on the recovery category so I was a little disappointed. But I hope I can repeat my request here so that I can receive assistance.

    I won't repeat the article but its here [http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=152942#152942]
    I have serious problems with my laptop and it is also in bad shape, I doubt that a genius can fix it... but I would like someone to help me, or give me some answers... I want to believe that Toshiba have made excellent products and I hope that this is reflected in the support community... so please help...
    I am a student of United... and without my laptop... it is so inconvienience.

    Check again your first thread. I posted my opinion on the matter!

  • Help with crashing please

    Hello guys,.

    Can you please help me and tell me why my iMac freezes?  Here is the report of panic:

    Anonymous UUID: AE5E012D-2EB1-D916-D689-4D425901F6DC

    Fri Jan 8 18:12:23 2016

    Panic report *.

    panic (cpu 1 0xffffff80128b47df appellant): "(default pager): [KERNEL]: default memory manager"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3247.1.106/osfmk/default _pager / default_pager.c:421 "

    Backtrace (CPU 1), frame: return address

    0xffffff80aca63db0: 0xffffff80128e5357

    0xffffff80aca63e30: 0xffffff80128b47df

    0xffffff80aca63e60: 0xffffff80128b462b

    0xffffff80aca63e80: 0xffffff8012945aa1

    0xffffff80aca63ef0: 0xffffff8012e26234

    0xffffff80aca63f10: 0xffffff80129c135a

    0xffffff80aca63fb0: 0xffffff80129f48b6

    The process corresponding to the current thread BSD name: logind

    Boot args: vm_compressor = 1

    Mac OS version:

    15A 284

    Kernel version:

    Darwin Kernel Version 15.0.0: Wed Sep 26 16:57:32 PDT 2015; root:XNU-3247.1.106~1/RELEASE_X86_64

    Kernel UUID: 37BC582F-8BF4-3F65-AFBB-ECF792060C68

    Slide kernel: 0 x 0000000012600000

    Text of core base: 0xffffff8012800000

    Text __HIB base: 0xffffff8012700000

    Name of system model: iMac11, 3 (Mac-F2238BAE)

    Availability of the system in nanoseconds: 3440709270920

    last load kext to 1987699976309: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f959a9000 size 32768)

    Finally unloaded kext to 2047745897309: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f959a9000 size 32768)

    kexts responsible:

    com.apple.driver.AppleBluetoothMultitouch 90.3

    com.apple.driver.AudioAUUC 1.70

    com.apple.driver.AppleHWSensor 1.9.5d0

    com.apple.driver.AGPM 110.20.19

    com Apple.filesystems.autofs 3.0

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.driver.AppleMikeyHIDDriver 124

    com.apple.driver.AppleMikeyDriver 272.50

    com.apple.driver.AppleHDA 272.50

    com.apple.driver.AppleUpstreamUserClient 3.6.1

    com Apple.Driver.pmtelemetry 1

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.kext.AMDFramebuffer 1.3.6

    com.apple.iokit.IOBluetoothSerialManager 4.4.0f4

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.AMDRadeonX3000 1.3.6

    com.apple.driver.AppleHV 1

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.0f4

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.kext.AMD5000Controller 1.3.6

    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

    com.apple.driver.AppleLPC 3.1

    com.apple.driver.AppleBacklight 170.8.1

    com.apple.driver.AppleMCCSControl 1.2.13

    com.apple.driver.AppleUSBCardReader 3.7.1

    com.apple.driver.AppleIRController 327,5

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 37

    com.apple.iokit.SCSITaskUserClient 3.7.7

    com.apple.iokit.IOAHCIBlockStorage 2.8.0

    com.apple.driver.AppleFWOHCI 5.5.2

    com.apple.iokit.AppleBCM5701Ethernet 10.1.11

    com.apple.driver.AirPort.Atheros40 700.74.5

    3.1.5 com.apple.driver.AppleAHCIPort

    com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

    com.apple.driver.AppleACPIButtons 4.0

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 4.0

    com.apple.driver.AppleAPIC 1.7

    com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

    com Apple.NKE.applicationfirewall 163

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

    com.apple.driver.AppleBluetoothHIDKeyboard 181

    com.apple.driver.AppleHIDKeyboard 181

    com.apple.driver.IOBluetoothHIDDriver 4.4.0f4

    com.apple.driver.AppleMultitouchDriver 304,9

    com.apple.driver.AppleHIDTransport 5

    com Apple.kext.Triggers 1.0

    com.apple.driver.DspFuncLib 272.50

    com.apple.kext.OSvKernDSPLib 525

    com.apple.iokit.IOSurface 108.0.1

    com.apple.iokit.IOSerialFamily 11

    com.apple.driver.CoreCaptureResponder 1

    com.apple.iokit.IOAcceleratorFamily2 203.7.1

    com.apple.driver.AppleSMBusPCI 1.0.14d1

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.0f4

    com.apple.iokit.IOBluetoothFamily 4.4.0f4

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.kext.AMDSupport 1.3.6

    com.apple.AppleGraphicsDeviceControl 3.11.31

    com.apple.iokit.IOFireWireIP 2.2.6

    com.apple.driver.AppleHDAController 272.50

    com.apple.iokit.IOHDAFamily 272.50

    com.apple.iokit.IOAudioFamily 203.8

    com.apple.vecLib.kext 1.2.0

    com.apple.driver.IOPlatformPluginLegacy 1.0.0

    com.apple.driver.IOPlatformPluginFamily 6.0.0d7

    com.apple.driver.AppleBacklightExpert 1.1.0

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.AppleSMBusController 1.0.14d1

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

    com.apple.iokit.IOUSBMassStorageDriver 1.0.0

    com.apple.iokit.IOUSBHIDDriver 900.4.1

    com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

    com.apple.driver.usb.AppleUSBHub 1.0.1

    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

    com.apple.iokit.IOBDStorageFamily 1.8

    com.apple.iokit.IODVDStorageFamily 1.8

    com.apple.iokit.IOCDStorageFamily 1.8

    com.apple.iokit.IOAHCISerialATAPI 2.6.2

    com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

    4.5.8 com.apple.iokit.IOFireWireFamily

    com.apple.iokit.IOUSBFamily 900.4.1

    com.apple.iokit.IOEthernetAVBController 1.0.3b3

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IO80211Family 1100.23

    com.apple.iokit.IONetworkingFamily 3.2

    com Apple.Driver.corecapture 1.0.4

    com.apple.iokit.IOAHCIFamily 2.8.0

    com.apple.driver.usb.AppleUSBEHCI 1.0.1

    com.apple.iokit.IOUSBHostFamily 1.0.1

    com.apple.driver.AppleUSBHostMergeProperties 1.0.1

    com.apple.driver.AppleEFINVRAM 2.0

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 414

    com.apple.iokit.IOStorageFamily 2.1

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 4.0

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com.apple.kec.Libm 1

    com Apple.KEC.pthread 1

    com Apple.KEC.corecrypto 1.0

    Model: iMac11, 3, IM112.0057.B02 of BootROM, 4 processors, Intel Core i5 2.8 GHz, 4 GB, MSC 1.59f2

    Graphics card: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe 1024 MB

    Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020

    Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54313235533654465238432D48392020

    Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0 - P2P

    Bluetooth: Version 4.4.0f4 16320, 3 services, 27 aircraft, 1 incoming serial ports

    Network service: Wi - Fi, AirPort, en1

    Serial ATA Device: ST31000528AS, 1 TB

    Serial ATA Device: OPTIARC DVD RW AD - 5680H

    USB device: USB 2.0 Bus

    USB device: Hub

    USB Device: Card reader

    USB device: Hub BRCM2046

    USB Device: USB Bluetooth host controller

    USB device: USB 2.0 Bus

    USB device: Hub

    USB Device: IR receiver

    USB device: ISight built-in

    Crush Bus:

    The system has been hacked to disable paging and memory compression. The effects will be intermittent failure to launch applications and, possibly, a system crash. To undo the hack, please reset the PRAM.

  • Help finding Cortana please Acer Aspire E17

    Hello from England.

    I hope I'm in the right place, please excuse me if I'm not.

    I got a new laptop yesterday and while setting up, he just put in place Cprtine and someone came to my door, so I left the laptop for a few moments, hoping that waiting for me, but he'd ontosetting something else... I wibdows 10, already installed... and so sad, I do not see... Cortana you can help me find her please.

    Acer Aspire E 17

    Intel i3 cor

    8 GB memory

    1000 GB hard drive.

    I'm always learing windows10

    Thank you very much

    Barbara

    Press the logo windows + s

    type cortana

    the first result will be Cortana parameters.

  • Help blue screen please BCCode: 50

    I had my hard drive replaced on my Dell Inspiron 1525 under an extended warranty.  If the Vista operating system and drivers have been resettled by the service people.  Then I needed to reinstall software, I've had.  I tried to update everything that I can think of, but still have the problem.  Today when I turned on the computer I got a message saying my Windows operating system is genuine, never had this before, and now my desktop background is gone, it's all dark now.  As I was looking for solutions, the computer crashed again.  Now, in the lower right corner, I get the message "this copy of windows is not genuine."  I bought new computer and yes it is authentic.  In any case, here are the details of the most recent crash problem:

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 50
    BCP1: FD448FA8
    BCP2: 00000001
    BCP3: 81F347D5
    BCP4: 00000000
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Please help as this is getting really frustrating.  I hope I've put this in the right forum, I guess it's a matter of hardware/driver.
    Thank you!

    There were two reported stop error, a KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e) and a PAGE_FAULT_IN_NONPAGED_AREA (50).

    One KERNEL_MODE_EXCEPTION_NOT_HANDLED_M error was caused by the avgmfx86.sys, an AVG pilot.

    I would say to uninstall AVG and see if the problem resolves.

    Subsequently, you can reinstall AVG or go with other security such as Microsoft Security Essentials software.

    I also run a scan with the following application just to see if she picks up anything:

    TDSSKiller:

    http://support.Kaspersky.com/FAQ/?QID=208283363

  • HP ENVY notebook - m7-k211dx: password BIOS/Power-On. Need help if possible, please.

    Hello, I have problems with the password BIOS Power-On.

    When I enter the password I considered correct, that three times I get the following code.

    [50413568]

    Any help would be greatly appreciated. Of course, I'll thumbs up for help, regardless of the result.

    Please try = 45571568

    Kind regards

    GBL84

    I work for HP

  • HELP or advice please

    I'm trying to work on an application for BB10 running on the Alpha Dev Simulator. When crossing the Simulator, I see the app icon in the bar of the app, but when I do not get the list of the grid when loading I coded for the only thing that shows is a blank screen. I posted my code if someone can help me understand where I was wrong. I have the css bbui - 0.9.3 and JS and JS webworks - 1.0.1.5 in my folder packed files.

    index file:

    
    
    
        
            
            
            
            
            
        
        
        
    
    

    The House file:

    
    
    

    Assignment Assistant

    Please choose a class below

    Please choose a class below
    Writing and literature
    Solving equations
    Inquiry based studies
    Civilizations past to present
    Spoken around the world
    Special interests
    Special interests

    Configuration file:

    
    http://www.w3.org/ns/widgets"
            xmlns:rim="http://www.blackberry.com/ns/widgets"
            version="1.0.0.0" id="AssignmentApp">
        Assignment Assistant
        D. Rentz
        quick copy and retrive Homework Assignments
        
        
    
    
    

    Any help to get this figured out would be a great help, so I can move on to the next step. Thank you in advance for taking your time to help.

    Drentz wrote:

    Can someone check this. Is it possible that my index file is loading but don't push is not on my Home.html page? If yes what can I do to push my home.html page.

    You push a http://www.sigling.is/IMO/imofishing/home.htm, not home.html as stated in your source above:

    ..
    
    ..
    
  • BlackBerry Smartphones Blackberry WIPED HELP THEM! PLEASE

    Hi there, ok so I did something stupid. I put the password wrong and totally wiped blackberry itself. (I guess it's a safety device so that no one gets my information if stolen) and I lost everything. Tried to take battery out so he wouldn't keep dashing, but didn't ' work. Now it says JUM error 513 (Reset) can someone PLEASE help me? Thank you very much!!!

    Not good... you have a recent or not so recent appliance backup?

    I would recommend that you download the OS for your BlackBerry model, connect your BB via USB to your PC and follow the instructions for YOUR model of BB, found at the top of this link... one of those highlighted in yellow State "attention"...

    http://www.BlackBerryForums.com/General-8300-Series-discussion-curve/

  • I know the picture is weird, I'm sorry, he is not a troll, please help me. Please, I beg you.

    OK, first of all, I know the picture is a little inappropriate, I'm not trolling, it is be the photo I'm editing. Please help me. After installing photoshop on my PC (I usually work with this stuff on the mac, so the fact that it is on a pc is new to me) and photomontage, formed horizontal lines (it seemed it was glitching and panic, but the lines ceased to move in this model and are always there) on the layer and the layer mask , I was working on, and I can't turn the tide. I have tho9ught it was something wrong with my computer, so I backed up and restarted the computer (probably a mistake), and it is always the case. I don't want to do it again, can anyone help with this problem?Capture.PNG

    I have seen this problem before and it is caused by file corruption. And it is usually only 1 bit misplaced. This lost 1 bit causes this problem. So maybe try to go back to the client and the file zip before sending through or any way to go back to the original file. You have to somehow go back to the file origin either by the customer or if you take back your smart if this is an option. Otherwise, I have a manufacturer who invented the BetterLight back scan that might have a fix. Let me know if you can revert to the original file?

    Randy

Maybe you are looking for