Help! My Apple Watch is stuck on the screen of weekly activity

Hello

My Apple Watch is stuck on the screen of the weekly activity. I tried setting down, I tried the button dial spinning and nothing. There is no done either button. Do I let my Apple Watch lose all batteries, or is there a way to solve this problem!

Hello

There should be a link to the upper left corner of the screen.

Even if you don't see (after verifying that you have reached the top of the summary page), try to tap into this area to exit Preview.

Tags: Apple Watch

Similar Questions

  • my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

    my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.

    HI - try the following steps:

    On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):

    -Double-click the Home button, and then drag upward on each of the app previews to close.

    It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the Apple logo.

    If this does not resolve the problem, try next disconnect and rematching of your watch:

    -L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.

    -Choose to restore the watch (backup restore) when provided the opportunity during the whole.

    -Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

    - Pairing your Apple Watch and Support Apple - iPhone

    - Set up your Apple Watch - Apple Support

  • My locks of Apple Watch every time that the screen turns off.

    From the past week, whenever my screen goes black on the Apple Watch, it crashes. Whenever I want to check messages, use siri or do anything outside the eye at the moment, so I have to unlock it with my access code. It's pretty boring.

    Hello

    Check your settings.

    • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > enable the detection of wrist.
    • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake > turn the Wake screen on wrist lift.

    Also, make sure you wear your watch sufficiently well adjusted. If worn too loosely, your watch may believe that he had been removed from your wrist. With access code also allowed, it would then automatically locks. Performance of the sensor can also be affected by temporary changes or permanent on your skin, such as certain wrist tattoos.

    If you have not already done so, it can help to upgrade your iPhone and look at the latest version of the software, from your iPhone:

    More information:

    Port Apple Watch - Apple Support

    https://help.Apple.com/watch/#/apd748b87e2a

  • I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

    I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1

    does anyone have a solution to this?

    Hello

    The following steps can help (try again after each):

    • On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
    • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
  • I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

    I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.

    Hello

    Follow these steps to clear your locked watch and re-pair it with your iPhone:

    • Connect your watch to its charging cable - with power connected.
    • Hold down the side button until you see the cursor off the power.
    • Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.
    • Then re-pair your watch by using the app shows on your iPhone, choose restore backup when the possibility.

    More information:

    Set up your Apple Watch - Apple Support

    If you have forgotten the password for your Apple Watch - Apple Support

  • Apple Watch heart rate monitor, the signal can be shared with other devices such as the Garmin Edge 520?

    Apple Watch heart rate monitor, the signal can be shared with other devices such as the Garmin Edge 520?

    Hello

    No, that it is not currently possible.

  • I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

    I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

    I understand that if my Apple Watch is unlocked (or on my wrist) incoming Message notifications will be displayed on my watch. This allows to bypass the notification on my iPhone for messages.  I would like to find a way for Message notifications to simultaneously alert me on my iPhone and Apple Watch.

    Thoughts?

    Hello

    If you disable the detection of wrist (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection), it will make all notification alerts to be delivered to both devices. However, you will not be able to benefit from features including screen Wake on wrist lift, Apple pay and one unblock after placing the watch on your wrist.

    If you want Apple to consider adding an option for notification alerts to be delivered for both devices regardless of the other settings, you can suggest here:

    https://www.Apple.com/feedback/watch.html

  • What is the steps of double Apple Watch already saved on the iPhone?

    When I look at my health application, it shows the two steps saved on my iPhone in my pocket and not on my watch. Are these steps counted twice? How does Apple make them accurate and not counted twice?

    Hello

    No, your efforts are not counted twice.

    Health and fitness data from other sources, iPhone, and Apple Watch are grouped within the app to health on the iPhone, which allows you to adjust the results to avoid any double counting of data from different sources.

  • Why Whatsapp disappeared on Apple Watch after having installed the 2.1 OS

    To cancel the possibility of using Whatsapp for my Apple Watch was a good idea!

    When I boutgh my Apple Watch a guy in the Apple store told me that: "whatsapp now receive only notifications but, in a certain time, you're going to use it fully.

    It seems to me that we return instead to go further.

    Hello

    To receive notifications on Apple Watch WhatsApp Messenger:

    On your iPhone, in the application of the watch, go to: My Watch (tab) > Notifications > under the heading "alerts iPhone mirror of", scroll down to WhatsApp Messenger > turn on notifications.

    Also on your iPhone outside of the app shows, go to: settings > Notifications > scroll down and tap on WhatsApp Messenger > check allow Notifications is turned on and also the show in the Notification Center and display them on the lock screen are both enabled.

  • iPad2 9.3 upgrade stuck at the screen of the unavailable activation server

    I tried an ota on my iPad update 2 and it is stuck on the screen of activation with an error message - activation server is temporarily unavailable. tried rebooting, connect to iTunes - nothing works... Any help on this would be welcome.

    BTW... my iPhone6 and mini ipad updated very well...

  • Stuck on the screen of HP recovery and cannot start windows

    HP Pavilion
    Model: 17 - 1215dx

    If you need the serial number or the fn, just ask. I didn't post too much sensitive information.

    It was originally 10 64-bit windows... but now has 8.1 Windows 64-bit
    i5 8gig of RAM processor

    Literally just close the lid and open it upwards and it wouldn't boot windows. It is stuck at the screen HP saying it's diagnose my problem. Tried a soft reset and a hard reset when you remove the battery and put it again while it is unplugged. Did not help. I can't start in safe mode. I tried to do a restore which has been a success but it restarts when he says "there was a problem, restart your PC. I'm frustrated and reset a factory and the same factory reset was successful and was when he came back to 8.1 because it's the OS, I bought it with but then it still wouldn't let me in windows. I was going to try and start to repair, but if I had known this would require an administrator I'd never have done the factory reset. I know I've been reckless, but I just wanted to work. But yes, I don't know what the problem is. I feel like if it was a hardware problem is just something to keep windows to operate. Should I try a repair disk? Would that help?

    The SecretLight

    Hello;

    Let me welcome you on the HP forums!

    I read your post you need to grab your laptop and wanted to help - but we need more information.

    You said that your laptop came originally with Win10, but then later, you said you tried to go back to Win8.1, you can then said, it's the original OS.

    So, who was the original - Win8.1 or Win10?

    Ask because if it came with Win8.1 and you UPGRADED to Win10, while Microsoft tells you that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly matter faction is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!

    The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.

    What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.

    You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers

    Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.

    Or, if you prefer, you can do the same by contacting HP Customer Service:

    If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

    If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

    NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

    Good luck
    ========================================================================
    I'm a volunteer and I do not work for, or represent, HP.
    ---------------------------------------------------------------
    If my post helped you, please click on the thumbs-up symbol to say thank you.
    If my posts resolved your issue please click "accept as a Solution.
    ========================================================================

  • Stuck at the screen of the POST - R500

    I have a R500 that one of my users has me just. It is stuck on the screen of the POST (ThinkPad splash) and does not respond to any keys pressed. I tried holding down the blue button "ThinkVantage" while turning on and still no response.

    I pulled the hard drive and plugged into another machine to be excluded as a possible problem. Which works very well. It seems that the system must be suspended during any of these POST I can't even access the start menu or the BIOS settings.

    Any help would be greatly appreciated so that I can get this user online.

    A quick search on Google and I've already found my solution. A broken USB port is to blame. Looks like it's a problem on early model R series machines. Here is a link to the post where I found my solution.

    -Kris

  • Weather gadget stuck off the screen

    I installed Vista to Windows 7 on my Dell laptop. The Weather Channel gadget is stuck off the screen, with only a small part visible. I can't move it, but I can open it from the small arrow is the only thing that I can see. How can I take off it to move on the desktop?

    Hello Smarski,

    I don't know what you see for the arrow. I installed the Weather Channel widget and find the normal buttons, including relatives, gadget drag more big size, Options. Try to right-click on it and using the menu shortcut or select move and move the gadget, or select close and then open again to place it in the default location on the desktop.

    Hope this helps

    Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 Enterprise - screen is stuck on the screen 'your computer is locked.

    Hello

    I have a computer for no reason while not using it decides to lock and stuck on the screen "computer lock you."

    I already have several times, power options changes since I work in a corporate environment all the machines are defined with the same question. All the computer we have, this is the 1st time that this issue has already shown. Do not know what could be causing the computer to be lock up on this screen.

    The computer in question are pushed constantly updated and have all the updates of the system. It is a desktop Lenovo M93p 8 GB if ram and a 256 GB SSD running off a Core i7. A reboot clears the problem for a while, but do not recur.

    Event logs see the errors for Schannel, application of group policy management and a problem of Netlogon. Not sure if they are related to the issue.

    Any help will be appreciated

    Hello

    I suggest you to post your query on our Forums TechNet social as this question should be better there.

    Please refer to the reference to the link below to send your request:

    https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

    Hope this information helps.

    Please get back to us with an update on the issue, we will be happy to help you.

  • The computer is stuck on the screen of the Aptio Setup utility.

    My asus laptop is stuck on the screen of the utility facility aptio how this return to the start screen

    Here is the Article of the same

    Try a 2nd

Maybe you are looking for

  • How blurredscript fixed?

    The script on Firefox is blurred. This has happened on several computers. My computer at home, my laptop and my work computer. It is only on Firefox. Is it a problem with the program, or do I have to erase something on my computer? I tried to clear t

  • 120 GB HARD drive is compatible with Satellite L35-SP4090

    Hello ervery body. I have a Tosbiba Satellite L35-SP4090 and I want to buy a 120 GB hard drive.My question is?This hard drive will be compatible whith my laptop? Please, I need their help.Next time.

  • Having problems installing the update

    Whenever I try to install this update, the system tries to install it for several minutes, and then frozen for a few minutes, then the 'blue screen of death' appears. The system then restarts.

  • Mini Compaq 110 enter current password help pls!

    CNU9406YZ8

  • SPAN and TCP RST

    I know that a Cisco IDS allows to inject a TCP RST in a SPAN port in order to kill a connection. My question is: this technique works only when you switch ports SPANing, or will it also work when SPANing VLAN? I was told that is not possible. Suppose