help, my computer icons are like windows 95 and nothing will work properly
I can't get anything to work, all my icons look like a piece of paper with the corner folded, internet explore does not open. He repeated to me that there is a problem but I installed over and over again. Please can someone help
Hello
1. What is the operating system installed on the computer?
2. have you made changes on the computer recently?
3. what happens when you click on these icons?
4. What is the security software installed on your computer?
Try the following steps.
Method 1.
You try to run this fix it and check.
Difficulty of broken desktop shortcuts and common system maintenance tasks: http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
Method 2.
Step1:boot the computer in safe mode and check.
Start your computer in safe mode: http://windows.microsoft.com/en-us/windows7/start-your-computer-in-safe-mode
Step2:Try to set up your computer in a clean boot state, and check to see if the same problem happens. Tuning your system to start in mode minimum state helps to identify third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 3.
Changing the programs Windows uses by default: http://windows.microsoft.com/en-us/windows7/change-which-programs-windows-uses-by-default
Method 4.
System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore
Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.
Start the computer in safe mode with network and then run a full virus scan.
Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
I hope this helps.
Tags: Windows
Similar Questions
-
Windows 7 icons look like windows 7 and xp mixed.
Original title: style of windows 7.
Hello! I don't know what I did but my windows 7 icons look like this now:
It's like windows 7 and xp mixed (see this marker of the icon like in xp, not not like in 7 transparent square). I kinda like that, but it will be better if you tell me how to do it on purpose, because I did not goal! And that's why I'm worrying about I did not on purpose! And I even took this screenshot using way: Impr. xp screen then the paint. What's happening: I mixed system files with my windows 7 xp half?. Help, please. And after that you could tell me how to do it on the purpose – if possible? I can like it :).Well, what the...? :) I restarted my PC (I stopped last night and just started my PC today) and everything is normal. My icons once more the window transparent when I hover over them like originally in windows 7. Do you always think I do the tutorial or he didn't need? :))
-
I have a second, older people, computer that I would like to upgrade using my drive of the windows operating system 7. Can I install and expect a request for rights of Microsoft? How much they want to?
George
If you are referring to recovery discs that you made from your stolen computer, I suggest that you don't waste your time. If she even installed it will not have the right drivers for your old computer so unlikely to work properly. It will give you any time a black screen and no real reviews.
Save yourself some grief and buy a genuine windows or use the computer with the operating system, with which it came.Ref:http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/my-lap-top-was-stolen-all-i-have-is-a-copy-of-its/e535f759-59a6-44CF-9c9f-5698928177ab -
I'm trying to install updates for computer that are recommended, but they are for Windows Vista and I'm now running Windows 7 and receive errors. How can I fix it?
Hi Barcini,
· This error message do you receive when you try to install updates?
· What updates are you inviting to install?
You can run the Windows Update Troubleshooter & check if the problem persists.
Open the Windows Update troubleshooting tool
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Installed the updates, but the display looks like windows 98 and the Wireless does not work
Hello
I use a laptop with vista service pack 2 and I tried to update windows via windows update on the recommendation of the support page from microsoft on how to unload a debugger. There are only three optional updates available, I forgot what they are and after restarting the computer the theme looked like windows 98 and my without wire might work, and also, I was still having problems with the game with the question of the debugger.What should I do?
(And Norton) McAfee applications are known to not uninstall (or upgraded) themselves. The 'remains' of McAfee may be cause of your problem.
1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
4 test cycle.
NB: If the application pre-installed McAfee subscription or free trial period has expired before you install Threatfire, the latter may not have installed correctly and can not work correctly since you installed it.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
On my old computer (XP), I used app fast backup protection to back up my files to an external drive, Iomega hosted Media Network Hard (2 TB). I have a new Dell PC with Windows 7 (64 bit) OS. With the help of a cable I copied all the files from my XP to Windows 7 computer. All the files on the external hard drive, copied to a "network". I am able to view all the folders of the Iomega file, but I can't back up my files to protect fast has not been improved to work w/Win 7. Quick protect is divided into 6 different discs (photo-U, V-ActiveFolders, W-Music, X-backups, Public-Y, Z-movies), Iomega recommends using backup Windows and restore. "Before you start this process, I would like to know if Windows Backup and Restore will copy a new set of files and adding to what is there in the folder backup previous Player X or if it will start a"new"backup" folder on drive X.
Original title: BACKUP AND RESTORE
New.
Probably in a completely different format than you are accustomed to and accessible in a different way.
Although I suppose you could create separate jobs for each of the existing partitions, if you wish. But I would like to backup these partitions to something else before you start. Heh
-
Moose title: How can I get the age of Mythology to work on windows vista
every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer
Hi rew55545,
(1) is this problem limited only to the age of Mythology disc?
(2) what version of the game you are trying to install?
Method 1: Run the fixit available in the link below and check if that makes a difference
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2: run the fixit available in the link below to resolve any problems with DVD player.Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 3: Select the boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
-
Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
step by step information!Hello
I suggest you to refer to the links and check if it helps:
Create a homegroup
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup
Join a homegroup
http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup
Setting up a network home
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network
Remote Desktop connection
http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection
What types of connections remote desktop should I allow?
http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow
Remote Desktop connection: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
Let us know if it helps.
-
I bought 2 Adera for Windows 8, and it will not download. Whenever I click on the download icon, nothing happens. It becomes extremely frustrating that the account has been debited from my bank immediately... Still no game! Any suggestions please. Thank you
Hello
You must get in touch with the sales of Microsoft and Windows Store Support for help on this issue.
To avoid such problems in the future, you can try to reset the Windows Store cache, and then try to buy apps.
Reset the Windows Store Cache steps.
a. press Windows + R on your keyboard to open the Run dialog box.
b. type WSReset.exe, and then click/click on OK.
c. the information store now open and indicate the following: for the store cache has been cleared.
Please let us know in case you need assistance on issues related to Windows.
-
Microsoft windows fax and scanning will not start on my computer laptop windows 7
Microsoft windows fax and scanning will not start on my computer laptop windows 7
Original title: fax and scanning
Press Windows key + R
Type: optionalfeatures.exe
Press enter
Expand Print and Document Services
Uncheck the fax and scan Windows
Click OK
Reboot if prompted
Press Windows key + R
Type: optionalfeatures.exe
Press enter
Expand Print and Document Services
Check fax and scan Windows
Click OK
Reboot if prompted
-
I have a paid subscription to cloud creative Illustrator and photshop. I had to make a computer reset due to windows 10 and now when I connect it says start trial?
-
Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.
Original title: code 10
Hello
Read this link which has also a few solutions:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/--------------------------------------------------------------------------------------
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
I try to run windows update and it will not update gives error code 80070005
I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?
Hello
1. which Microsoft Fixit did you?2 have you installed new hardware or software before the show?
3. who is the antivirus installed on the computer program?
4 update you are trying to install?
5. are you logged on as administrator on the computer?
If this isn't the case, I suggest you to log on as an administrator and check for the issue.Method 1:One of the other reason for the 80070005 error is caused by software running on your computer security.Temporarily disable the security software on the computer and see if that makes a difference.Disable the anti-virus softwarehttp://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:I suggest you perform the steps described in the article:Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
http://support.Microsoft.com/kb/968003This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
Method 3:Perform a clean boot, and then check if it helps.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
See also:Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesI hope this helps. -
Windows Fax and Scan will not add an account to my internal Fax Modem
I tried all the work around listed Forums and Windows Fax and Scan will not add an account to my internal fax modem. The Modem is recognized by Windows 7 and test very well. I am running Windows 7 Professional 64 bit.
Hello michgaud,
To set up a fax server
Before you begin, make sure that your computer is connected to the network and you know the network address of the fax server (for example, \\mycompanyfaxserver).
Click the button start , click programs, and then click Windows Fax and Scan.
To use the fax mode, click fax at the bottom of the left pane.
Click the Tools menu and then click Fax accounts.
Click Add, and then, in the Fax Configuration Wizard, click on connect to a fax on my network server and follow the instructions.
Check the following settings:
In Windows Fax & scan settings, open tools/Fax and under the general tab.
Look at the 'Fax select device".
Your modem is listed here?
You have the, "allowed to send and/or receive" selected?This setting should be checked and selected until all accounts are created.
You can watch the post following TechNet with a suggestion that might help with your problem.
http://social.technet.Microsoft.com/forums/en-us/winserverprint/thread/18a5dba1-1bc5-49EB-923A-b81958e80727I hope this helps.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?
Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.
Maybe you are looking for
-
HP Pavilion Desktop PC 500-290: video card
When I want to run two models, I bought an additional graphics card, but when the pc restarts the two screens are black. even the monitor which is connected to the built-in VGA port. I need to remove the new graphics card so that the built-in VGA wor
-
Scan to pc error4 [(3,42,0)] Digital Image Monitor stops working. Scan Doctor repairs DI Monitor and she immediately stop woring before I even try a scan. I run hpqtra08.exe which initializes the DI monitor and after a few seconds it stops working ag
-
I have a new Gateway DX4870 with Windows 8 (64-bit) with some peculiarities. None of the programs MS video series appeared (with the exception of the music section) and there is a sort of an "ACER" section in my programs that I wouldn't think that w
-
On the integrated IAAS, application form he is an owner field that allows you to search for other users, and to assign the property to them. Someone at - he found a way to get something like that on a form of ASD? I was originally hoping I could us
-
Prem pro 2015 lost the project Panel!
Hey, this sounds crazy, but I completely lost the project Panel and have no idea how bring it back please can anyone help?Thank you