Help! My ideapad s110 turns on if I press the power button

Similar Questions

• Help - HP Pavilion a6030.uk desktop computer. Have to press the power button several times to start?

  Hello

  I have a HP desktop computer. The model is HP Pavilion a6030.uk, Opertating system: windows vista.

  My computer has had no problems at all until yesterday for some reason, I had to push the switch several times to start until he finally turned and did normal starts. As I would press the power as normal to start button, but all of a sudden, it turns off after about 2 seconds and so I would tap on the switch several times and each time it will not start and turn off, then the power button could be pressed again until it would finally turn on and start and run as normal and seems to work correctly. And it was the same thing today, I pressed the power button mutiple times (for example 6 times) until she finally started as usual.

  Savvy/computer im not very well informed or wise in this area, please someone will help me and give me some advice/help to fix/resolve this problem.

  Thank you for taking the time to read this and any help would be appreciated for this problem.

  Thank you.

  Vonbon90, welcome to the forum.

  When I see these symptoms on an old computer, I think it may be a power supply (PSU) failure/ing.  Here's a guide that will help your troubleshooting it.

  In addition, you could test the memory.  This can be done by removing all modules of memory and replacing them one at the time and start.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash

  I have a Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash. I need help...

  The brother of contact support.

• Lenovo Y40: Must only press the power button two times to turn on

  Hello

  A few months ago, I bought my Lenovo Y40 on the Lenovo Web site and recently, to turn on, I have to press the power button twice. When I press that once, the Lenovo logo is displayed on the screen, but after 2 seconds it turns off. On the second attempt, finally the laptop turns on and the windows is started.

  In addition, rarely the phone stucks on the lenovo logo screen, is necessary to contain the power to reset.

  Someone had some problems like these describe above?

  Thank you.
  Pedro Lopes.

  Hello

  I contacted Lenovo's Support and they recommended to perform a full recovery of the system. Apparently, it worked because I did not suffer these problems since I got windows. Probably, there was a problem with the partition that has been responsible for the initialization of the system.

  Thank you, Pedro h. Lopes.

• The HP printer won't turn on or respond when the power button is pressed

  The HP printer won't turn on or respond when the power button is pressed

  The HP printer won't turn on or respond when the power button is pressed

• When my computer goes into sleep mode, I have to press the power button to turn it back on.

  original title: sleep/hibernation

  When my computer goes into sleep mode, I have to press the power button to turn it back on.  I used only having to press a key on the keyboard.

  Can someone tell me how to solve this problem, as if it was before?

  Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel.  Then go back and put them in the way they were and OK your way out.  Occasionally, it will reset the internal parameters and things can return to normal.

  HTH,
  JW

• Windows XP will not be closed. I have to press the power button to turn it off.

  original title: WINDOWS XP WONT SHUT DOWN - I HAVE power to the BOTTOM BY pressing POWER BUTTON COMPUTER

  WINDOWS XP DOES NOT - STOP I HAVE TO POWER COMPUTER DOWN BY PRESSING THE POWER BUTTON

  I had a computer that had posted these symptoms.

  In the end, I did the following:

  1. in Control Panel, "Power Options."

  2. click on the "tab APM" " ".»

  3. check "Enable Advanced Power Management Support"

  4. click on OK

  Check the result.

  Reference: http://support.microsoft.com/kb/313290

  Hope this helps

  Post back if necessary

  ________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• all in a single j6480 won't turn on or off by pressing the power button

  my all in one j6480 won't turn on or off by pressing the power button. from pluging in the power cable to the output, the display panel stays on by a flashing point moving from left to right, repeatedly. also, there is a faded beeps coming from the printer on the left side. See no empty self am unable to do anything on this subject.

  There may be a problem with the power supply/power cord module brick.  Try following the steps described in this document.  If that does not receive the printer works properly again, you can try to contact tech support to buy a new power module (if still available), or you need to replace the printer.  You can join the 1-800-474-6836 technical support to the United States and the Canada International users click here.  Let me know what happens.

• HP-G62226TU: my laptop won't turn on when I push the power button

  Hello

  My laptop does not turn when I push the power button / stop and nor adjacent to the plug adapter lights turn on when I put the power supply. It behaves like completely dead. I pressed the button for 30 seconds as suggested in the following thread.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/my-laptop-won-t-turn-on-when-I-...

  My laptop is 2.5 years old and was working fine without any problems so far.

  Please suggest.

  Thank you

  Himanshu2303 wrote:

  OK... I learned to get the motherboard changed. How much it will cost in India for my laptop?

  What do you suggest I should do?

  How much will it cost in India?  I have no idea. I live in Europe.

  I suggest to ask a repair shop of PC or laptop.

  If the cost of repair is more than 50% of the current value of the laptop, you would be better sourcing of a notebook replacement.

• Pavilion 15, G8D9OPA #ACJ: my laptop does not turn on after pressing the power button

  HII, after a week that I have on my computer hp laptop 11 months but its not get. I even removed the battery and tried to get by pluging the adapter, but it doesn't work. What I would do. Please help me.

  Hi @Swati_20,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I understand that your Pavilion laptop not turn on.

  When I did a search with the product number, you provided I have no results.  Would you be kind enough to verify this information.

  How can I find my model number or product number?

  What operating system do you use?

  When you connect it to the power light on the power supply?

  Here is a link to the HP laptops - tests and using the AC adapter that can help.

  You can also try a hard reset.   HP - notebook computers use the hard reset to solve software and hardware problems

  Please keep me updated.

  Good luck!

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to resolve your problem as " ""Accept as Solution"" " to help other members of the community!

  To show the appreciation for my efforts, please click the 'Thumbs UP' icon' below.

• My computer will turn off not when I use the start menu, it is as I have not yet hit shut down. I have to press the power button to turn off.

  It happened once before and I don't remember what I had to do to fix and I can't find this post to remember.  Thank you in advance...

  Hello

  You did it all change hardware or software on your computer before this problem?

  You can follow this link & check if the problem persists:

  Windows stops responding during Windows XP shut down

  Advanced Troubleshooting for shutdown problems in Windows XP

  Hope the helps of information.

• My sansa e260 suddenly is energized when I press the power button. Help please

  Hey, today my 260 just stop feeding up out of nowhere. I don't have the latest version of the software package, and when I tried the update, he couldn't. It lights up when I connect the usb cable, but not when its disconnected. Before this he repeated bad tracks on all my songs even if their were not all and kept cutting. Can anyone help me please with this problem?

  It seems that the battery is detached. Open the back (4 small screws, don't lose them), take out the battery, put in comfortably recharges. If it does not reload it, he could be dead - they have no last forever - and you can get a new one on Amazon or eBay.

  For bad tracks, ChkDsk. Might as well do it first, since you can connect.

• I can't see Start button and have to turn off my computer using the power button / stop

  When I use Mozilla, I can see no longer the button 'Start' at the bottom left of the computer. The only way that I can disable the computer is holding the "Power" button What I did to cause this.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

• HP Slate 6, (problem: do not turn on the display, by pressing the power button once)

  A month ago, I bought the HP slate 6. The screen does not light by pressing the single time power button. But if I press the power button three times, then it lights. I also make sure that the switch has no problem. I think it's a software problem not hardware.

  Do not forget that I have improved my slate to kitkat. This problem alone caught up in not before Kitkat.

  Best wishes for you

  Topic: Alxhan cc

  Thanks for the info!

  Usually, if a factory restore temporarily solves the problem, but it returns that it is because of the apps to steal resources.

  Try going through this guide that will give you some useful tips for monitoring resources and reduce delays in system:

  5 common causes of lag Android devices (and correct)

• My NEX - L 6 freezes after I turn it on, then press the film. Need to remove the battery.

  I have the NEX-6 with a 16-50 lens and it freezes when I turn it on then press the movie button. If I wait longer before pressing the button, it seems to be OK, but if not, the goal remains unretracted and start and stop again does not help. I have to remove the battery and restart the device. It took me a while to understand why it was freezing upwards, and there is at least one situation where I seen it happen on a regular basis. Does anyone else have this problem? I hope an update of the firmware wouldn't be now, but have not seen.

  No when I turn it on, it gets stuck, like a windows pc stuck with the sandclock or the circle around truning

  Its either a bug software or a problem with the 18-200mm lens, it doen ot havppen with the 16-50mm lens.

  Also, sometimes he will, but refuses to focus, as the engine focum does not report you to turn.