Help, my laptop does not charge 100%

Similar Questions

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• HP-gs61-110sa: help! laptop does not start

  Help, please! Laptop does not start. Looking at the black screen with cursor flashing at the top left.

  Hello

  If you do not, use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD ( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the CD to repair.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the CD from repair and try to restart the laptop.

  Kind regards

  DP - K

• Laptop does not charger and cannot get into the Bios, help!

  Hi, I own an Acer Aspire 6935 G, so far he treated me so. Recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but on my charger fuse blew!

  Then I took another replacement just to the case where there has been previous replacement I bought and nothing major, new replacement seems to work well (lighs load lights up) but it does not all power in the laptop. Witnesses of load lights as indicated, but the laptop won't before the Acer splash screen. Due to the battery being dead, I can't access bios set up so I can check the status of my laptop not enter recovery. I was wondering if it could be something other than a hardware problem, and if this is the case; It is expensive to do is fixed or am I better off buying a new laptop?

  Thanks in advance!

  This is a:

  Acer Aspire

  6935G

  Intel Core DuoT6400

  4 GB OF RAM

  Windows 7 Ultimate

  Edit: There is think beep when the chargers plugged into the lapto, if that makes a difference?

  Lugman > recently, the charger port broken (one of the wires came loose). I have brought a replacement and mounted in it, but blew the fuse on my charger! >>>

  Sorry, but it does look like a hardware problem. Sounds like the power supply may be about to blow another fuse. I think you have a short or large scale electric leakage somewhere that prevents charging of the battery and power - it but maybe not enough (yet) to blow another fuse or switch off the LEDs.

  First remove the battery and power connections before you tear things. The first place I would look is around the port of loading where your problems started and hope that it's not deeper in the system where it can cause some MB or more serious damage. Look for the places where the lines of welding on the System Board may be in contact with a screw or a metal on the ground. While you're there, reconnect both ends of all accessible Ribbon (like the video and keyboard) connectors. Also to the HARD drive, modules of memory vivid and all the other connectors for component for good measure.

  Once you have checked everything, and before you have wound all caches and screws, see if you can carefully insert the battery into the receptacle and plug the charger. Don't try to power. You can do this on an insulating surface to avoid the land of naked drivers. The LED light looks like he is in charge? If so, let it continue to charge without trying to power on. I think after 4-5 hours, the led that would indicate a fully charged battery. If so, I would try and then power on. If not, and it's still seems to be in charge, stop, do not try to and we will draw the next steps.

  Jack E/NJ

• Pavilion dv6: laptop does not charge when it is plugged

  Today my laptop stopped load so it was still plugged in, ive tried turning on with and without so that connected battery and still nothing is my battery or power cord my problem? The cord connected to the ac area seems loose also, but except that there's no damage.

  Ok. To solve your problem.

  The power\charge the light come on when the adapter is plugged in and the battery is removed?

  Shake gently the connector to the laptop or the power connector from the power adapter does the led flicker?

  The led charge\power is a diagnosis which lets you know if the power adapter is working or has failed.

  If the led does not illuminate the resolution of the problems that I have described is performed, then the power adapter has failed and must be replaced.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• HP Mini 210-1000: Please help! Battery does not charge even if it's plugged

  Hello! I'm writing this fear and despair because my HP Mini 210-1000 is defective and I'm working on my undergraduate thesis.

  The problem:

  The battery says it is plugged and charge but after giving a few hours to recharge, it is still stuck at 65%. Another thing is that I must keep the trendy netbook so he can stay in power. He started last night when I was finishing a paper, then the laptop stops suddenly. When I restarted, I thought it worked well. Then things started acting weird after.

  I already tried things:

  -cold reset

  -30 dry to hold the power button

  -HP battery Test and turned out the battery be "good."

  Data sheet:

  -HP 210-1000 (I got it for not more than 5 years already.) I just changed the battery cable last month. This is the first time, it acted weird)

  -10 Windows (32 bits) | originally from Wndows 7 Starter

  -Intel Atom

  -CPU N450 @ 1.66 GHz 1.67 GHz

  -BIOS Configuration: F.04 - 12/30/2009

  -Product number: WD344EA #ABV

  -Serial number: CNF005CBGQ

  Please help me.

  After five years of reliable use the battery is more capable of providing the power as it did once.

  So, Yes, it seems that the tests failed.

  In the wizard in the HP Support, there is usually a calibration option which restores the full charge, which is 100%, which is currently available.

  If the battery has no real ability to the left, then it will be in fact a bit of a moot point.

• Laptop does not charge

  Hi all

  my battery is charging, but my phone shows me who is disconnected. How can I solve this problem?

  Thank you in advance!

  Hello

  First, stop the laptop, unplug the power adapter, remove the battery and then press and hold the power button for a minute.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the PC, unplug the AC adapter, reinsert the battery and then start the PC on just the battery.  Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the PC again.  Now plug the power adapter (with the inserted battery always) and start the laptop to see if it helped the issue at all.

  Kind regards

  DP - K

• Dell Precision M6500: Reference DELL M6 500 computer laptop does not charge when the work and no start-up when which

  Laptop DELL M6 500, do not load when the work and no start-up when which

  just bettry lights blink when phone on Exchange when I plug laptop tap, on bettry

• HP ENVY Notebook PC m6: HP Envy does not charge while the laptop is turned on.

  Hello

  Well, I'm having some trouble loading with my HP ENVY. My laptop does not load as I'm with her. It will charge, but it does charge when the laptop is closed and sometimes if it has locked and disabled.  I don't know if it would be the battery or the power supply? Maybe something internally?

  Key points

  * Battery charge does that when the lid is closed (sleep mode). **

  * If I close the lid and plug in the charger, the light indicates orange and the battery will deliver to load almost exhaustive *.

  * If I open the lid before the orange light changing to white, battery icon always says: _ % available (plugged in, does not support). **

  * I tried to waste the battery. I removed the battery and the AC adapter is plugged in. I tried to turn on the laptop or don't put in place *.

  I don't have to replace anything yet. I was hoping to find out if anyone has had this happen to them before.

  Thank you

  Maggie

  Hi there @mdeely,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the battery not charging. I'll be happy to help you.

  Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?

  When I enter the product number, I'll get the documents to your computer.

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Edge 15 X 301 battery does not charge

  Browsing the forums seems to be a fairly common problem.  I hope I can find help here because I personally am really tired/frustrated a recent experience of Lenove service but that's another story and I'm here to try to resolve a problem of battery without spending a penny more on this laptop I'm seriously regretting buying.

  Question: My battery discharge (up to 38%), but does not charge.  Status, as in the myriad of other posts on this topic, is "plugged in, not charging".  Power Manager says battery is in good condition and there is no obvious reason I can telI.  My system tells me I have the latest firmware (0002-0004-4216-00C 0) and software (v6.32 Power Manager).  This just started happening a few days ago.  I called guarantee help and they told me they couldn't help me because I was out of warranty - their advice to download all the latest and greatest software and good luck.  "We refer to service centers in the cases where it's a hardware problem... ».

  As I said earlier, I did put more money in this laptop and if that ends up being a hardware problem (no obvious signs of damage not present whatsoever) I'll probably put this lemon on ebay and I hope make $100 and away from Lenovo all together.  Everything has been a terrible experience.

  Any help would be appreciated.

  I have the same problem on TWO computers 15 laptops on board. Periodically the battery stops charging a the only way out is to turn it off, remove the battery and press on & press and hold power for about 30 years. Plug the battery in, power cable and the power upward and it works very well - for a few days/weeks. Then the round, there it is again.

  everything is up to date and I'm under pw6.32. I think that the problem started with the latest bios BUT not sure.

  Turn on Lenova fix of this problem.

• Satellite A60 - laptop battery not charge/work

  Hello

  My stop laptop when you use the battery power. It will not re-start until I plugged in to the power supply. Every time I disconnected power laptop would shutdown. laptop does not work on batteries, no lights are working.
  When it is plugged seeing orange lights. Battery remains 90% fresh even after hours on departure av! I suggest that I can't use the battery power and the battery won't charge.
  Only a new battery in a month and has worked well up until now.

  I tried toshiba control energy saver but made no difference.

  I can't say with certainty if this happens because of the battery or something. In my opinion, it can be either battery or electronic power supply.
  Satellite A60's old laptop and everything is possible.

  Pre-installed software doesn t have a any influence on this. Toshiba power saver is preinstalled to consumption, Manager, with other words to help reduce battery power consumption and longer battery.

• Satellite L655-13V - battery does not charge

  I have laptop Satellite L655-13V and the battery does not charge while I plugged the AC/DC adapter.
  and give me this status: "plugged in, not charging."
  And when I connect the battery only work on computer, and when I connect the AC/DC adapter only without battery the computer works also.

  But when I connect the battery and plugged to the AC/DC battery adapter not charging and give me this status: "plugged in, does not support".

  Please, help me to overcome this problem.

  Hello

  Leave the AC adapter plugged into the laptop for a longer period of time.
  In many cases, the battery may not start to demand immediately, as his deeply discharged.
  In this case the adapter must be connected to the laptop for a long period of precharge the battery, then the battery should start loading as usual.

• HP dv6t 3100 laptop does not turn on (but the light)

  Hello...

  My laptop battery 3100 dv6t has is not good enough. It doen't take the load. Power goes off when the laptop on. Suddenlty it will turn off and now I can not turn on. But the charging light turns red for about 1 minute and it turns white after that. But the laptop does not light. What should I do? Help, please.

  Thank you!

  Hello kelum17,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that your computer will not start correctly. I will do my best to help you with this problem! For help, try the procedure described in this document from HP: computer does not start

  This document contains the steps such as resetting the laptop and more, corresponding to the exact symptoms. I believe that this document will solve the problem. If this isn't the case, I would contact HP support by phone using equipment. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide
  
  Please let me know if you have any questions or concerns. Thank you for bringing This problem on the HP Forums. Have a great day!
  
  Mario