HELP, my laptop hangs when starting

Similar Questions

• Pavilion TX2623: Laptop hangs when starting Windows

  Hello

  When I start the laptop, I see the HP logo, the blue window of Microsoft and the white dots turning in a circle and then everything freezes after 5 seconds or more. If I force the power off I can restart without problem. At the start, I can hear the fan, player and I see that the player accesses (blue led).

  I tested the memory and the disk with tools (diagnostic) which you can access from the start. The results were very good.

  I did a hard reset, search the forum for similar problems.

  What bothers me is the fact that force a shutdown will lead to a normal start. For several days, the model has been the same. Computer hangs at the first attempt, I force shutdown and then everything works fine.

  Any idea?

  Concerning

  I managed to find a solution.

  It seems that the fast start feature is at the origin of the problem. I turned he took and no more freezing, at least so far (several departures and stops without problem).

• System hangs when starting

  Someone had problems with t he laptop freezing on the screen of the Toshiba logo when starting? The only way to turn it off is to pull the battery, no other button works. Cannot, press F2 or F12 or button / stop. No response from either of them. After several attempts, the computer will boot. and run ok. Thinking it might be the motherboard or hard drive, but the two discover ok with diagnostics.

  Any thoughts would be welcome.
  Thank you
  Harvey

  My PSA has always been very helpful, but to be honest I didn't noticed this problem on my laptop.

  Generally if the laptop freezes during POST (power on self-test) then an error on the motherboard could be detected
  Eventually he s RAM related question
  If the RAM is faulty or malfunctioning, then the laptop could freezes

  Try an other Rams. Maybe it helps, if not, then a motherboard must be verified

• HP-gs61-110sa: help! laptop does not start

  Help, please! Laptop does not start. Looking at the black screen with cursor flashing at the top left.

  Hello

  If you do not, use another PC to create a Windows 7 repair CD.  Download the ISO from the link below.

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD ( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the CD to repair.  Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the CD from repair and try to restart the laptop.

  Kind regards

  DP - K

• Photoshop cs5.1 hangs when starting

  My cs5.1 photoshop freezes in reading preferences when starting.  I've tried resetting preferences, did not work, tried a new installation, it freezes again... help?

  Solve problems of launch | CS6, CS5.5, CS5

• Setellite A665-5170 - hangs when starting certain applications

  Hi, just got this phone 5 days ago, nine from Best Buy and cannot get it to work...

  Details of HW & SW:
  It has a built-in Intel HD GPU.
  Windows 7 Home Premium 64-bit

  When you try to run certain applications, the impression that the HARD drive is constantly used, and the symptoms are that this request, nor other can operate.

  Example:

  Installed Skype 5.2, launched the program. He began
  For more than 5 minutes, I tried to start "Task Manager" to monitor the activity.
  "Task manager" window comes after 3 minutes and doesn't show anything in the 'processes' tab (Skype is still loading) trying to move the window will become grayed out and "Non-response" appears for a few seconds.

  When "Task Manager" finally shows info, I see that the CPU is almost not used (once again, the HARD Drive LED is constantly lit).
  Forcing of Skype to the 'end' can take another 10 minutes, after which the laptop becomes usable, once more.
  Uninstallation has taken more than an hour and only succeeded after a few reboots.

  I tried older versions - same result.

  Same effect is noticed in other scenarios (i.e. navigate on the internet while playing music with Windows Media Player).
  Although I doubt it, this can be related to Windows 7 64 bit does not completely supporting 32-bit applications.

  P.S. I do not live in the USA so I can't just go back to BestBuy and get their support.
  I feel lost and don't know what to do... Pleas help.

  Hello

  Because the laptop is new, I recommend that you set the notebook back to factory settings.

  Check the available applications. It must be called Creative Software recovery disk Toshiba.
  Create a recovery disk and after creating recovery disk, retrieve the device.
  This will set the laptop to the State as on the first day of purchase.

  Hope this helps you solve this problem

  Good luck

• G42-461TU: Laptop hangs when the charger is not connected in

  Hi all

  I use HP G42 - 461TU Notebook.I have a problem with my laptop. He often gets crash when the load increases. Once when the charger is plugged in, it works fine. But when the charger is disconnected, it gets even once block. I thought it might be due to problem of memory and I added extra 2 GB DDR3 RAM too (totally 4 GB now), but the problem persists. Now I use windows OS 10, but I faced this problem with windows 7 too. Can someone please help me diagnose the problem with my laptop? Thanks in advance!

  Hi @Dinesh_R,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that your notebook crashes when the charger is not connected. You can start with this document: computers HP - computer is slow (10 Windows)

  Let me know if that helps the problem.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• [Personal information deleted]: Support HP support hangs when starting the

  

  On HP Support Assistance to start up, I get this message.

  

  Whenever I click on 'OK', it is on this same screen.

  I had this problem until I upgraded to Windows 10 (upgrade to Windows 10 July 30, 2015) and I guess it's never resolved. I thought he would go himself after a few reboots but unfortunately that was not the case. It was a bit difficult to find my information to computers because I didn't want to remove the battery. I also do not have a tag on the bottom of my laptop. Never came with one when it was purchsed. Is it possible that I can have this problem? Help, please. The system is going on 3 years, wifi, replaced card, fell (but it's been a great soldier!), hinges replaced, battery sealed with a tape or paste will fall due to a fall and hinged battery broken, battery is in the descents, & scratches little couple on the screen but nothing major. To use the computer for school work until I graduated in may 2014.

  Ms. Gettings

  Hello @gettingsb,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I read your post on the HP Support Assistant and wanted to help!

  For starters, can you provide me with the number of product of your laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

  In the meantime, please consult this document, to see if the problem can be solved:

  HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Win XP Pro SP3 hangs when starting.

  My copy of close to ten years of Windows XP Pro served me well... it has been updated a number of pious UN time (and that was just the first few days after I first bought!) is the current state of the SP3.  I've never had a problem with the start of the BONE, until two days ago.  He simply refused to start.  There had not been updated, there had not been any virus, (Norton 360 first version 5, SpyBot Search and Destroy, AVG Security Suite Pro) full... it worked and works well, I stopped him and when I went to restart, it is hanging in the first screen of Windows XP (black one who lights up for a few seconds and scan blue dots everywhere under the name "Windows XP").

  I was able to restart in safe mode, no problem.  I then went through all the lists of things to try that I could find on here and any other support area of Microsoft.  Clean boot didn't work, start diagnosis does not work, no matter how configure msconfig, the result was the same. hang in the first XP screen.  I found an article that said to use the Windows installation disc and do a "set up"... essentially replace the operating system without affecting any of the other programs or data on the disk.  I did this, and of course, it still hangs on the first XP screen.  The kicker is NOW, I can start is no longer in safe mode, because it comes in saying that it is a 'NEW' XP installation and as such must be activated before first use... and because activation cannot be done in safe mode, please restart the computer in normal mode and proceed with the activation...

  IF I COULD START THE COMPUTER IN NORMAL MODE, I WOULD HAVE NOT HAD TO REINSTALL THE OPERATING SYSTEM AND SHOULD NOT ACTIVATE OR HERE BEGGING FOR HELP!

  Hi RonaldHaywood,

  It looks like the Windows XP installation is damaged and that the only option is to reinstall Windows XP on the computer after saving the data.

  You will need to take the computer to a store local tech to save data and then perform the clean installation.

  Install, reinstall, or uninstall Windows

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• Windows hangs when starting

  Hello..
  am on vista Home premium on a Toshiba satellite computer laptop.my laptop crashes or freezes while loading windows during startup, the loading sign window will pass and stops. It does not move again. Please I would like to know how to solve this problem.
  Help me please
  Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• HP 6530 b hangs when starting

  Hi all!

  I have a HP 6530 b hanging while I'm trying to start. Basically what happens is it starts to boot and then it stops. I got Windows 7 Pro 64 bit installed with a Linux 12.04. I was doing my job on the computer a few days when it shut itself down, without warning. The screen will not suddenly goes black, but it was as if I had told her to stop, that I did not. As he was closing down, there the screen on the fact that she had installed updates. Anyway, it restarted itself and it could not boot into Windows. It got to the point where the Windows Logo appears, but it froze right there.  I waited for about 20 minutes to see if she would do anything, which he did not. Tried to restart that and it froze before he even got the Windows Logo. Now, it happens on the screen that indicates that Windows could not start and needs to be started in recovery mode. I tried and it failed too. I could remove the hard drive and connect it to another PC and starts very well under Linux, he said that the installation of Windows has been damaged. From what I can deduce, I think I can give up this install of Win7, but I can't understand what is causing the PC to hang during startup. any suggestions are appreciated.

  Thanks for the advice, but I already understood that the motherboard is bad. Thanks anyway!

  -DogLover

• Help! Laptop won't start up. BSOD "Stop: c000021a {fatal system error}...". »

  I have a laptop Dell Inspiron 1750. Since Sept 09.

  Starting from Saturday, may 8 my system won't start up

  I turn it on it loads the Dell logo, loads the windows logo, and then flashes a blue screen for a split second (the blue screen flashes so quickly that it is difficult to read what he says, so I recorded it and it comes up with "STOP: c000021a {fatal system error} the verification of a knownDLL failed.") system process finished unexpectedly the status of 0xc000012f (0x0007c220 0x00000000) the system has been shut down.) and restarts after the dell logo loading again it goes to a black screen with the options to launch start up repair or start windows normally.

  I have Launced the Startup Repair, after loading files and checking for problems it says then Startup Repair cannot repair this computer automatically. I made the diagnosis and he says there is no problem, I have contatced dell as it is still under warranty but they said this isn't a hardware problem, it is a software problem and infact NOT covered by the warranty and I have to pay £60 to have the support of the software. I don't have a recovery disc and tried to restore the system to an earlier stage. But no luck!

  Was hoping someone here, perhaps a solution. Please please please help!

  Thank you very much
  Ship

  Status 0xc000012f is "STATUS_INVALID_IMAGE_NOT_MZ" - "the file specified image did not have the correct format, it did have an initial MZ." (anecdote: binary windows start with MZ - the initials of Mark Zbikowski - who was a promoter of the MS-DOS product)

  That, with "a knownDLL verification failed."  Basically telling you that you have corrupted files on your system.  Any chance you are able to boot into safe mode or safe mode with command prompt to run SFC/scannow?  Can you somehow shoot out of the system event logs and check the events worthy of attention?  Are you all able to run chkdsk on the drive through the command prompt in the System Recovery Options?

• Premiere Pro CS6 hangs when starting

  I have install Adobe CS6 Master Suite. All the other programs I ran into this suite very well work. However, when I try to start Adobe Premiere Pro (either just the program or by double-clicking on a project), the program crashes before it can end the commissioning. I use Windows 7 Ultimate, that displays the message

  "Adobe Premiere Pro CS6 has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  I tried to uninstall and reinstall the program, which did not work. I also did the same with the sequel, which has worked for me yesterday, but today when I tried to start Premiere Pro, it broke again.

  I use an Alienware 14

  Intel i7-4910MQ 2.90 GHz

  16 GB memory

  64 bit

  I don't know what other information would be necessary to solve this problem. And I thank you for any help, as Adobe does apparently not care enough about their customers to provide support for their products.

  Update:

  I tried to install an earlier version of the Adobe Suite (CS5) after using the Adobe tool to clean all my system facilities. I met the same problem, I've never seen with this version. So, I guess it was something wrong with Windows. I was going to return my PC to its factory settings, but decided to first update to Windows 10. The update corrects the problem. Thus, there was apparently a problem with the installation of Windows, or possibly a program that changed the Windows somehow he couldn't run Adobe Premiere Pro. In any case, I am using it without problem with creating for a few days now, so the problem seems to be resolved. Thanks John Smith, to try to help me to troubleshoot this problem. I'll keep in mind that double graphics cards are likely to cause problems when I have problems in the future. I didn't know this before. See you soon.

• Adobe Photoshop CC 2015 hangs when starting

  I terms of photography, and I used it for over a year now and all of a sudden now when I try to open PS I get that the application stopped working when the program starts. I'm running Windows 8.1 and I tried to uninstall and install the program and all my programs adobe and Adobe CC entirely with no luck. The only thing that have changed before that I had this problem, it is that I changed the graphics card to a ti GTX 980. Help, please!

  Well in this case I advise you to contact the customer service where the agent can remote into your machine in order to solve the problem.

• Prelude for Mac CC hang when starting

  On my MacBook Pro with the display Retina running OS x 10.9, I've updated for NVidia. Veda pilot 5.5.28 and FxFactory 4.1.1. After this prelude (latest) block when I start the program. A pop up dialog box said that there is no compatible video module on my Mac.

  It is a mistake to FxFactory dialog box and prelude simply close.

  Help please

  I found the solution

  install Media Encoder and first

  go to /Users/ [username] / Library/Preferences/Adobe/Premiere Pro (Adobe Media Encoder or another program)

  Delete the make folder called 8.0 and 8.0. Cmd + i on this issue, press the lock icon, and set [rwx] for everyone.

  Enjoy

  PSIF works try to copy and replace AdobeCoolType.framework (or amtlib.framework) other Adobe app $APP$ / contents/frameworks.