Help! My operating system does not work with disc
When I installed the DIGITAL SOLUTION DISK for my new EOS 7 d mark ii a window pops up stating:
This software is not compatible with your operating system
I use an old dell works well with XP, is there a way to get around this, I already have photo professional, eos utility etc. of my rebel...
ANY help would be greatly appreciated
Having been forced to upgrade too because I need to process RAW images from the 2 7 using Photoshop, I can tell my updates went well. I bought Win 8.1 & done a clean install on a new hard drive & waited to win 10 out & from my old programs would continue to operate. 10 once was readily available that I made an another clean install on another hard drive as an installation & nine 64-bit (added 16 gigabytes of memory also) & things was great when working in Photoshop, BUT for all those who 7 2 treatment check CR2 what device profile is best. By default, it chooses an Adobe profile that works very well with my other camera files but Standard camera looks better with 7 2 files.
(My computer has provisions for 5 internal hard drives & I 5) I can easily re boot for XP or Win 8.1 if I need to use one of my old programs, but so far, I've been running Win 10 on my office & XP on my laptop.
Tags: Canon Camera
Similar Questions
-
Qosmio G10: The operating system does not work corectly
Hello. My problem is that my windows xp does not work corectly, mousecursor, sounds, videos, games, programs, everything turns into a ' stop and go '. as the cpu slows all the 1-2 seconds. I reinstalled windows now 4 times and any document in the format hd´s.
Don t know what to do...
and a second question... maybe this could be the answer for the first ;-)
in my hardware-registration of my system windows are two elements, for I can't find a driver.
-PCI-Device
-videocontroller fuer multimedia (German ;-))
in English systems, maybe it's the multimedia "media control device" or "videocontroller" or something...does anyone know if I can get the drivers, because they´re not listed on the toshiba site. and my backup-disk system was stolen. (sounds strange... I know :-))
OK, please give me some advice, if you have any ideas!
THX a lot, patrick
Hello Patrick
First of all, it will be interesting to know if the unit is pre-installed by recovery media. The installation of Qosmio is quite complicated, and I recommend you use the restore CD.
In this way it is not possible to give a precise answer because I don't know what kind of things is installed on your device. I guess in your case, some application (such as the virus scan) runs in the background and your HARD drive can be pointed out.
If your recovery DVDs is stolen, you can order a partner of service authorized in your country.
Good bye
-
Serial port under guest operating system does not work
Running VMWare Workstation 7.1.3 on win 7-64 bit. Guest operating system is win 7 32 AND Windows XP (32 bit). I followed the instructions on connecting to the host serial port. However, there is no access to serial port a guest OS. Serial Port sniffer running on the host shows NO ACTIVITY on the port operating system serial host.
Even serial device, attached and if running on the host works very well.
Any ideas?
Steve
I doubt that the documentation is correct for what is with VMplayer 3 on Windows TGV serial ports is.
Read my notes http://faq.sanbarrow.com/index.php?solution_id=1007I removed the option of thinprint and reconfigured the serial port in the vmx file attached.
Turn off the virtual machine and replace the existing by the attached vmx file.
Then try againIf it still does not - change
Serial0.yieldOnMsrRead = "FALSE".
TO
Serial0.yieldOnMsrRead = 'true '. -
operating system does not work
My laptop runs bt I dnt know why it is said that installing the operating system.
Dear customer,
Welcome to the Support Forum HP and we are happy to help you
According to the message that you posted, I suspect that this could be due to the recent changes are applicable
I'd like to request you to perform the procedure to solve the problem below:
Step 01. Turn off the computer
Step 02. Turn on the PC and keep pressing the F8 key
Step 03. Select "Safe Mode" in the early startup Option list
Note: Wait until you get to the Windows desktop
Step 05. Please remove unwanted startup items and uninstall unwanted applications
Step 06. Please reboot / restart your PC normally
Note: Incase if these steps don't work you can continue to troubleshoot the issue once again
Step 01. Turn off the computer
Step 02. Turn on the PC and keep pressing the F8 key
Step 03. Select "Last known good configuration" in the list of the early start Option
Note: Wait until you get to the Windows desktop
Step 04. Please remove unwanted startup items and uninstall unwanted applications
Step 05. Please reboot / restart your PC normally
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
K N R K
I work on behalf of HP
-
NIC Vista guest operating system does not work
I am running VMware Workstation 5.5.5 build-56455, on a Win XP Pro host system.
I just installed Windows Vista business as a guest operating system, but I can't get the network to work.
How to make this work?
The 'real' my Dell workstation NIC is a Broadcom NetXtreme 57xx Gigabit Controller, if it is relevant at all.
Concerning
MazH
It seems that the virtual NETWORK adapter is not installed on the client, otherwise, you would see an adapter in the comments "ipconfig" with an APIPA address.
Install the VMware tools in the comments (you always do). It contains the correctdrivers for the virtual card.
AWo
VCP / VMware vEXPERT 2009
-
How repairing when HP Pavilion dv7-4065dx will not run the operating system, disk hard main self-test result 303.
Hello
303 error seems to indicate that the drive is defective and must be replaced - it is also compatible with the problem you describe.
If your laptop is still under warranty, contact HP and arrange for the disc replaced.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.
Kind regards
DP - K
-
I have Windows XP Professional as the operating system.
The computer used to be connected to our network of offices. My wife brought her home computer, and to my knowledge because the computer was not connected to this network for several months, there is a security problem that will not allow it to connect to the internet. To connect to the router, it will not provide access to the internet.The computer sat for several months, as it was useless to do not be able to connect to the internet.We bought Windows 8 as a solution to overcome this problem we are not computer scientists.We strive to use the disc drive is a Sony CD - RW disc. It works fine with any disc in there BUT NOT disks of 32 or 64-bit.The disc of going just in and nothing else, I can load it, cannot Explorer, nothing. It's like nothing is there.Any help would be huge, 1) either you connect back or 2) get the installation to work.I wanted to make a clear 100% boot, but I do know and am confused about ISO / ZIP bootdisk stuff with no internet connect.Hi Chris_556,
I suggest you to refer to the help article and check if it helps.
Wireless and wired network problems
For you reference:
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060
Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
Problems of migration to a new system - guest operating system does not work
I've been running VMware Player on a Win 7 64 bit laptop. I have 3 computers of customers, which is 32-bit Win XP. I've just set up a new machine, also running Win 7 64 bit, but a processor more recent (i7) and more memory (32 GB). I use the same version of the player on both machines (4.0.1 build-528992). I copied all the files from the laptop to the new office. Ubuntu and Mac OS X Lion customers will work perfectly. When I try to run the client Win XP, I get the following message:
File not found: Windows XP Mode base.vhd
This file is required to power on this virtual machine. If this file has been moved, please provide its new location.
I don't have a VHD file, I have a VMDK file (again, which works fine on the laptop). I tried turn off the virtual machine on the laptop, then copying the files to the desktop, and I also tried to suspend, both with the same results. When I try to change the settings of the virtual machine on the new desktop, clicking on the adjustment of the hard drive (IDE) causes the following message:
The parent of this virtual disk could not be opened.
The VMDK file is 19.2 GB. I've searched and searched trying to find why this could happen and found nothing. The XP machine has a good bit of responsible software that I use on a daily basis. Last resort, I could create a virtual XP machine on the new desktop and reload all the software, but strongly prefer not to do it - it would be a tedious task.
Does anyone have any ideas as to what could happen and how to fix it? I copied the files several times to ensure that it is not something simple like a damaged copy. I'm puzzled. The XP machine was NOT initially a WIndows XP Mode machine, even if the message indicates that VMware Player seems to think it is (and, again, it works fine on the laptop). The name of the virtual machine is "WIndows XP Mode" - maybe that's why he complains. Is it possible to rename all of the files and references to files to resolve this problem?
Any help would be greatly appreciated!
Welcome to the community,
We can be able to know if the virtual machine is one any "Windows XP Mode" VM or not to take a look at VMware.log virtual machine. Please attach the last file vmware.log file XP VM (that of the laptop), as well as the PC to your next post.
André
-
New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!
That is right. The requires iTunes 12.3.3 and in order to get it, you will need to update OS X to El Capitan. That's how Apple has created for better or worse, I'm sorry.
-
Having saved palettes of colors and values CMYK in the color picker, how do I add Pages 5.6.1 color picker in my MAC (OS 10.10.5) system directory, so it does not work with other programs e.g. Word? I saw way back with Tiger BONES.
What you want to replicate from El Capitan in Yosemite?
- The file containing all the samples stored color of the Apple color picker?
- The color picker itself?
- Both?
Question 1 is a simple transfer of a single file.
- From the Finder, press shift + cmd + G keys to go to the folder. Copy and paste the following in this dialog box:
~/Library/colors - The file has your stored color swatch is: NSColorPanelSwatches.plist
- On Yosemite, quit Word, Pages and other applications that use the Apple color chart
- Repeat step 1 on your machine of Yosemite
- Rename (do not remove) the Yosemite NSColorPanelSwatches.plist existing NSColorPanelSwatches.plist.old
- Copy the color swatch file El Capitan in Yosemite file location
- Launch the applications that use the color chart to see Apple El Capitan from swatches.
-
I updated my Apple ID, but only old man always appears when I try to update my password does not work with the old id. Can anyone help?
You can try to log in to your old account and then sign in with the ID again. Your applications will be always related to the original account - you must use the old account to update.
-
my life chat lx-3000 does not work with Windows 7 help plz__
my life chat lx-3000 does not work with window 7 help please
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to the it.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?
Visit the HP website and look.
-
The latest version of Lr does not work with the last WIN10, I need help
The latest version of Lr does not work with the last WIN10, I need help
Finally I understand it by putting at level c ++ Redistributable Package, surprisingly it works. Anyway, thanks for your answer...
Good day!
-
I have Photoshop CS5 extended version 12.04 with camera RAW version 6.7. It does not work with files. NAVE generated by NIKON 610. What can I do?
Hi danielem,
Need you minimum Photoshop CS6 & Camera Raw version 8.3 use of Nikon 610 RAW files.
see the related link: supported by Adobe Camera Raw devices
However, if you cannot upgrade to Adobe Photoshop CS6, then you can use the DNG Converter to convert your images to DNG and use it with Photoshop CS5
Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.3
Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.3
Let us know if that helps.
Kind regards
~ Mohit
Maybe you are looking for
-
Request help second addition, internal hard drive [HP Pavilion Elite e9290f]
Hello Quick question here. I am a music producer and you can always use a ton of extra space as some of my projects are 17 to 20 GB in size. My HP e9290f comes with a stock of 1 TB Seagate (I think) internal hard drive. I intend to add this DeckStar
-
Some of my measurements of screws are back with an extremely long string of decimal points. Is it possible to have TestStand overall trim it down globally or individually for the report? Thank you JVH
-
VAIO rz54G backuip? restore? replace?
I have a rz54g Vaio that came with Windows XP Media center edition and now gives me some trouble. For while now, when I start or restart during POST, I get an error "the chassis fan is abnormal." What I do is to hit F2 to get the program installation
-
laptop light shop and was asked to check the internet connection, he tried his, but he said that without internet conection will not work even the wireless
-
upgrade of vista home premium, Ultimate
When I try to upgrade family vista premium sp2 to vista ultimate sp1 upgrade option is grayed out and advised that I need to upgrade to a version that is newer than my current,.