help needed to connect to Canon 6 d for iPad remote app

Similar Questions

• Are there alternative software to connect my Canon 5 d for my Macbook Pro

  I had to dust off the cobwebs on my MAC power pc slow to pull a recent work that Canon has no downloadable software to hang my Canon 5 d for my MACbook Pro... that anyone has ideas... Save to invest in a 5 d iii...

  I know Aperture 3.4 hitch support of shooting for Canon 5 d via a USB cable.
  http://support.Apple.com/kb/HT4176
  But don't forget to use the free trial first to see if it works for you before you buy anything.

• Connect the canon PIXMA MG7120 for Mac

  Problem: Cannot connect computer and a canon PIXMA MG7120 printer

  Have it hard cable with a USB cable.

  Did all the set up with the printer.

  Have updated firmware today.

  I have not had any problems with the initial installation.  Close this printer for a few months and returned to

  working here, but failed to get a connection between iMac laptop computer and printer PIXMA MG7120

  Help, please!

  Two of these printers are in different places.

  Use the same computer at both locations.

  Suggestions?

  Hi bethbishop,

  We can reset the printer on your Mac and then reinstall the printer using the latest drivers on the Canon USA site to try to get the printer connected to your computer.  To do this, please follow these steps:

  1. go on the icon of your Apple in the upper left corner of your screen.

  2. click on System Preferences.

  3. click on Print & Fax

  4. right click your printer on the left, then select "reset printing system".  Note: If the right click does not work, press and hold the control key on your keyboard and then click the mouse button.

  5. If your printer is still on the left select your printer, and then click the minus (-) button to remove it.

  6. restart your Mac.

  Then please click here to access the page PIXMA MG7120 drivers and software.  Once on the page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, please, click the red arrow next to the "RECOMMENDED FOR YOU" section and click on the DRIVERS AND PACKAGE of SOFTWARE FULL file.  When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once the file is downloaded, please double-click it to install all the printer drivers and software on your Mac.

  I hope this helps!

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• I need to connect my HP 2200 printer for a 32-bit Windows 7 system with NO parallel port

  I have an older HP Business Jet 2200 printer coming to leave, and I love using it.  My problem is the upgrade to windows 7 and a computer-ish with NO parallel port.  I have seen cables with female parallel to USB connectors, but the cable I have has a male connector to my 2200.  I have a Dell XPS 600 former with no parallel port I want to use as a backup computer.  My system is Windows 7 32 bit.  Can someone help me? should I think about a direct stream map server thingie or I can just a cable for this?  Thank you all!

  I am VERY happy to share positive results for my project listed above.  I went on Ebay and raised his eyes to the parallel to USB cable port and found a 36 pin, which was what I needed.  I got it for next to nothing

  36 pin parallel USB IEEE 1284 Printer Adapter Cable - I got it home, plugged into the side 36 pins, the business jet HP 2200, then plugged on the side of the USB to the Dell XPS, I worked with - and immediately the cable acknowledged.  It took me a few tries to get the software and I didn't know if it was to be on the LPT or USB, so I played with both and it was released as an HPA installation, which worked like a charm!  With the fragility of the printers of today; This printer is one of the sturdies and I can still get parts for it.  He has been a workhorse for me for six years now and of course, it has been around since the beginning of the 2000s.

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• Help! I need to connect Linksys WAP4400N 3 to an existing linksys WRT350N router

  Please someone help me.

  I have a modem connected to a router (Linksys WRT350N). The router is connected to a PC and then connected wireless to 3 laptops. Everything works very well.

  Now I need to extend the network to 2 other floors and so just bought 3 Access Points (WAP4400N). The plan is to make a wired connection to router for APs on each floor. The router is on the ground floor. I asked the CAT5e cables to the location of the router for the 2 floors where the APs will be.

  Now, this is my problem: when I'm on the upper floors and plug the cables directly on my laptop (AP off and not connected to the cable) I can connect to the internet with the cable connected to the router on the ground floor. I can also connect to the internet via the AP when it is connected to and sitting on the same table as the router on the ground of grongd. However when I take the AP to the upper floors and then connect the cables already thrown for this on the uppr floors I am unable to connect to the internet, but get a 'LIMITED CONNECTIVITY' message.

  Please can someone give an instruction step by step how install and configure a Linksys WRT350 Wireless Router to a Linksys WAP4400N Access Point

  NB. whenever I tried to select automatic DHCP against IP STATIC on the WAP4400N installer it will just in an endless "Please WAIT... RESTART SYSTEM' and the screen remains like this for. So I was able to use STATIC IP in the WAP4400N configuration.

  Since yesterday and today, I have been on it.

  Any help will be much appreciated.

  Kind regards.

  Well done to death. You advice was more useful. However, I think I need to make this post

  The problem has been as a result of lower cable at my provider. The network is running smoothly. Has been in place since last week when I replaced the lower quality cat5e cable cat5e cable.

  A Board here please be careful and make sure you complete the cable correctly. A bad end can lead to connection problems I discovered in this case when my team confidence terminated cable incorrectly.

  Network is up to & operational

  Thank you death your help has been invaluable.

• Canon MG5650: Canon MG5650 printer/scanner that can I print using the wifi but HP spectrum says I need to connect to analyze

  I have a HP spectrum 13 and we operate a wireless LAN at home that includes the Canon MG5650 printer/scanner. The connection between the two devices works very well generally. I can still print without problem. Today, I am not able scan - the laptop says that I need to connect to the printer to be able to do, but I am well connected via wifi, I can print.

  I turned off the laptop and rebooted. I stop the printer and restarted. No action produces a change.

  The printer is conducting the analysis. If I perform the scan at the printer operation, the scan is successful and the printer sends the document scanned to the laptop of my wife - it's the primary printer that will recognize the cannon.

  This was not a problem never before.

  I would appreciate any advice on next steps to solve the problem.

  Thank you.

  Tony

  Eventaully problem solved by adding a new application on the Canon site on the desktop and removing the old app scan supplied with the laptop. It does not explain why the problem occurred in the first place but provides a "fix."

• BlackBerry, need help Urgent network connection problem

  Hi all

  I put an application Blackberry OS 6 and 7 of the OS, this application uses the salesforce connection and its other api calls.

  My application works well here in India, but when I deliver it to the customer I had connection timeout error (in the United States). I tried all the string connection possible but still unable to solve the problem at my end.

  Can someone help me with this problem?

  Its very urgent. I need to connect via WAP2 and the code for my connection parameter string is:

  "

  Dim connectionString As String ="";

  String carrierUid = getCarrierBIBSUid();
  String wap2 = getWAP2ServiceRecord();
  If (carrierUid! = null) {}
  Otherwise, use the Uid to build a valid transport BIBS
  request
  Logger.logEventInfo ("uid is:" + carrierUid);
  connectionString = '; deviceside = false; connectionUID ="
  + carrierUid + ";". " » ;
  } ElseIf (wap2! = null) {}
  connectionString = '; deviceside = true; connectionUID =' + wap2;
  } else {}
  A carrier coverage, but not the BIBS. So use TCP of the carrier
  network
  Logger.logEventInfo ("no Uid");
  connectionString = '; deviceside = true;
  }

  return connectionString;

  "

  the definations of function are:

  "

  private static String getCarrierBIBSUid() {}
  Reviews [ServiceRecord] is ServiceBook.getSB () .getRecords ();.

  for (int i = 0; i)< records.length;="" i++)="">
  If (records [i] .getCid () .toLowerCase () .equals ("ippp")) {}
  If (records [i] .getName () .toLowerCase () .indexOf ("bibs") > = 0) {}
  Records return [i] .getUid ();
  }
  }
  }

  Returns a null value.
  }

  private static String getWAP2ServiceRecord() {}
  Full book sb = ServiceBook.getSB ();
  Reviews [] ServiceRecord = sb.findRecordsByCid ("WPTCP");
  String uid = null;
  for (int i = 0; i)< records.length;="" i++)="">
  Search through all records of service to find the
  valid non-Wi-Fi and non - MMS
  Booklet of WAP 2.0 Gateway Service.
  If (records [i] .isValid () &! records [i] .isDisabled ()) {}
  If (records [i] .getUid ()! = null)
  & records [i] .getUid () .length ()! = 0) {}
  If ((records [i] .getCid () .toLowerCase () .indexOf ("wptcp")! = - 1))
  & (records [i] .getUid () .toLowerCase)
  .indexOf("wifi") is - 1).
  & (records [i] .getUid () .toLowerCase)
  .indexOf ("mms") ==-1)) {}
  UID = records [i] .getUid ();
  break;
  }
  }
  }
  }
  If (uid! = null) {}
  Open a connection WAP 2
  Returns the uid;
  } else {}
  Consider another action transport or alternative.
  Returns a null value.
  }

  }

  "

  I get "unable to select the descriptor of adequate transport for the url:

  "https://login.salesforce.com/services/oauth2/token ...". "

  any help is appreciated

  Thank you

  Manish Kumar

  Hi all

  I solved the problem.

  My connection setting requires '; EndToEndDesired' for HTTPS request (although it works for me without this parameter). I tested the app using deviceanywhere and after the addition of this application of the setting run perfectly.

  connectionString = '; deviceside = true; connectionUID =' + wap2
  + "; EndToEndDesired ';

  Thank you for your comment stone

  I was actually using reproductive WAP2.

  Version of the client OS is BB OS 7 (on the Torch 2 9810)

  Concerning

  Manish Kumar

• Unable to connect w / Canon Pixma MX860 printer now I ElCapitan.  Need to print today... any suggestions?

  Just upgraded to El Capitan and now cannot connect with Canon PIxma 860 and not financially able to buy a new printer... no workaround solution suggested?  Canon has written is not compatible with El Capitan.  I have to get off at Yosemite?  Thank you.

  http://GIMP-print.sourceforge.NET/MacOSX.php

  This link should make your printer work again.

  That said, I've not heard of Captan El is not not compatible. But this fix should work.

• How can I connect my Canon SX700HS of my iPhone5s wireless?

  I can't get my iphone to connect wireless to the Canon SX700HS. I am able to see Canon SX700 in wifi to my iPhone and I am able to select it. When I open the remote application EOS and select the connection of the camera, I see the camera appears at the bottom of the window as a Wi - Fi connection, but it does not appear as a camera detected at the top of the window. Y at - it a setting I need to change? Help, please. Do I need to enter my iPhone 5s RITS information? If Yes, where can I enter this informtion?

  Yesterday evening and quite easily, I managed to match my new Powershot SX600 HS with my iPhone ('old') 4S.

  Obviously, I think that you have downloaded 2 applicable Canon software apps on your phone.

  Now, I'm in a bit of a fog, but I wanted to share with you. I was helped by the manual modules Canon at this link, the 'Wireless' section somewhere about 89 p.:

  http://gdlp01.c-WSS.com/GDS/8/0300013588/02/pssx600hs-Cu2-en.PDF

  Canon wireless a windowsphone pairing is another story entirely.

  See you soon!

• Why do I need to connect to IEEE xplore?

  I use a computer at my University. Sometimes I need to search for articles in IEEE Xplore http://ieeexplore.ieee.org/Xplore/home.jsp

  Actually, since there is a computer in my University, I don't need no connection IEEE Xplore to get the document I want. When I use other browsers like IE, it automatically connect to an account (this is perhaps because of the IP address.). But whenever I open IEEE Xplore in firefox. It is said: «Institutional Sign In» Some say it is because firefox uses a proxy? I don't know. How to solve this problem?

  Hi qiaot,
  You may need to ask the administrator of these computers from the University if they have a mozilla.cfg file or preferences locked in the Firefox profile first.

  The parameter that controls how Firefox connects to the internet is as follows:

  1. Click the Menu of Firefox
  2. Click Preferences/Options
  3. A settings tab open, click the magic hat or the "Advanced" tab and at the top, click on 'network '.
  4. Click on the 'Settings' button and take a look at the second screen shot. If this second screenshot has no information on a proxy this could the question and you would uncheck "do not ask for authentication if the password is saved" (assuming that you have Firefox save your passwords: Password Manager - don't forget, delete, modify and import passwords saved in Firefox )

  Don't forget, if you connect to this computer with a name of ads may save the password for the profile account, however if it's a public computer, others will have access to the password if you save it to the Treasury. I hope this helps.

• Qosmio G20-139: What cable I need to connect a 5.1 system speakers?

  Hi all

  Does anyone know which cable or connector, I need to connect my Qosmio g20-139 to a 5.1 system speakers?

  I searched the forum and it seems that someone has used a "optical cable Toslink" - check link below:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=3665

  Anyone successful with this? Can someone please give me a link to a place I can buy something that works? (I put 'Toslink optical cable' in google and it gives like 1 million different things!)

  Thanks for your help.

  Chris

  Hello Chris

  I found a useful site on the required cables.

  Check out this link.
  http://www.mycableshop.com/2nd_Cat/Toslink.htm

  You wondering where you can buy these cables. I put t know you came but I m sure that every good PC or reseller of audio accessories can sell you these cables.

• my printer did not come with all the cables needed to connect to my computer

  I just got a PIXMA ip2820 and he came with all the cables needed to connect to my pc or is it wireliss and if so how I managed to connect wireless

  Hello.

  Our printers do not come with USB cables.  If you do not have a cable connected to a previous printer, you can buy any B USB standard cable locally has to establish the connection.  It is a pretty common cable located at most major retailers office supply or electronics.

  The iP2820 can only be used with a USB connection.  It doesn't have wireless capabilities.

  It has not responded to your question or problem? Find more help contact us.

• I need to connect to Microsoft to pay a Bill. I do not know my password and my email address does not work.

  I need to connect to Microsoft to pay a Bill.  I do not know my password and my email address does not work. Please help me how to do this.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/forgot-username-and-password-for-pop3livecom/7fa0ba83-0207-4dd9-9d25-135cc1e96dd6

  Hi PAULWILBURN,

  Here is a link to the MSN Support.

• Linksys NAS200 Network Drive help needed please?

  Hello, I would like to know if I can connect my Canon MP780 all in a multi inkjet printer in one of the USB ports on the back of my NAS200 training network and share my printer on the network, is it possible, or are these two dedicated USB ports only external drives?

  Thanks for any help with this issue.

  Cheers from MagicBytes

  Hello Arupis_Retpada, thanks for the reply, yes I thought that this would be the case, was hoping it was possible, oh well not to worry, thanks for the suggestion.

  At soon MagicBytes