Help! No sound when importing MXF files

Similar Questions

• YET CS6 - glued pine Wheel Mode when importing video files simple

  STILL, CS6 - glued pine Wheel Mode when importing video files simple. I'm having the exact same issues on my IMAC (end 2013) and my MacBook Pro (late 2009). I'm on day 2 of this. STILL worked very well last week and I was told no upgrade or modules from. Any help would be greatly appreciated.

  NM

  Adobe has NOT made the decision to stop the upgrade again... see #8 here because why http://forums.adobe.com/thread/1337952?tstart=0

  If you want to use again, you must have an operating system supported... and Mac 10.11.4 is not supported

• Importing MXF files in timeline fills all audio channels! CS 5.5

  Hello

  just started using a Sony PWM 200, that I imported the files via the media browser in the project. But when I drag them in the timeline, the audio fills all 8 channels [I'll be mixing 5.1].

  Is this normal? I was expecting just four...  Can I pass just to import four somehow?  Ideally two, I just recorded sound on both channels, with covers of channels 3 and 4.

  Thank you

  [PC, win 7]
  

  Click with the right button on the clips, and then select Edit > Audio channels...

• Import MXF file in the first

  Hello

  I use a canon XF100 and first pro CS5 on a Mac Pro.

  I would like to know the best workflow, so I can get pictures from the camera, at first, so I can start editing.

  My attempts so far:

  1 import the MXF file directly in the first

  Result: When a visitor the clip on the timeline, the audio only appears

  2 using the XCam transfer to import images and convert to .mov

  Result: The audio and video appear on the time line, but the audio is shorter than the video skips and jumps

  Your advice and patience is greatly appreciated.

  Maxwell

  Canon mxf files import is not broken in 2015.

  Copy the entire hard disk map and place the folder CONTENT in a folder of its own video for example.

  Then import it via Media Browser.

  Or use the XF utility to export mxf files so unique.

• I see my .nef being adjusted automatically when importing raw files

  Sorry if this is a stupid question or answered before, but when I import files from my CF card in lightroom, import the files I can see them coming as I pulled on them and then adjust automatically to be darker.  I import with no presets.  Is this a function of lightroom see what camera images where shot with it and then make an adjustment based on the camera?  Is there anyway to eliminated adjustments because the files are imported.  Any help would be greatly appreciated.

  See this FAQ - http://forums.adobe.com/thread/358016?tstart=0

• FCPX crashes when importing MXF

  Jin

  the images, I am trying to import comes from SONY PXW - X 70, who gave me the MXF files.

  These files can be read by VLC, no problem, there is something in there!

  but as soon as I start to import into fcpx, it crashes

  I tried to import a different type of film and it worked fine

  This is a brand new imac 27 16 GB ram, video codecs updated, included pro

  restarted the computer, re-installed fcpx already

  I don't usually have no problems but images used come from alexa cam

  I thought fcpx might ingest MXF files without having to transcode.

  If you have an idea...

  Thank you

  ercorr

  Since February 4, you updated ProVideo codecs? Version 2.0.4 is released that day there and provides the necessary support for MXF files. (Check the App Store > updates page.)

• Mail crashes when importing MBOX files

  Mail crashes instantly when I select a MBOX file to be imported. In the brief moment before crashing it creates a folder to import and an MBOX, but the MBOX is empty.

  


  A few days ago I had a MBOX to import. It appears in the Library/Mail/V3/boxes to the letters/folder, then the MBOX container keeps messages from work. However, this MBOX does not appear in the sidebar.

  I went to a backup clone made shortly after the installation of El Capitan. I have replaced Mail and every file relating to mail that was in my user library. This leads to crashes instantly every time instead of intermittent partially blocks by an import.

  I made a secure boot boot. The problem remains.

  Reason 49 on why it is wrong to let the snow leopard. I wouldn't have moved to the Mail except that Outlook 2011 cannot search for emails or run unread simple as filters. (Recommendation from Microsoft is to buy Office 2016).

  Any ideas on how to fix the post other than to reinstall El Capitan?

  I have more information. I started in Snow Leopard and opened Mail 4.6. He had no problem importing the files MBOX to Outlook emails and attachments. I started to El Capitan. I deleted the folder/Library/Mail. I launched Mail 9.2. He created a new folder/Library/Mail that had obviously, no emails. I imported into the Mail 4.6 Mail folder. Everything imported perfectly. Yay! I then tested the capacity of 9.2 mail to import a MBOX to Outlook-created file small. Immediate crash.

  I hope that the problem was that Outlook 2011 on El Capitan generates corrupt MBOX files, but appears not to be the case. They looked good in BBEdit. Outlook had no difficulty to import.

• No sound when playing audio files

  the sound does not when I try to play music, but when I go into the Panel and test it, the sound works what should I do

  Try this: http://windows.microsoft.com/en-US/windows/help/no-sound-in-Windows

• How to import MXF files in CS4 first?

  The MXF file comes from a canon XF305 camcorder that I borrowed.

  I can play MXF files in VLC Player, but when to drop the mxf in first cs4 file, it gives an error and does not play.

  Y at - it a free solution to make it work?

  The platform is 8.1 64-bit windows.

  If I use ffmpeg demux the file into m2v file, I can then use premiere cs4.

  ffmpeg-i input.mxf - vcodec copy output.m2v

  I don't know why it does not work as an MXF file.

• Error header when importing Wav files

  The problem I'm facing is that first CS6 will not import my audio Wav files. When I try to import It gives the following message and is unable to import the file:

  "Cannot open the file due to a header error".

  The original audio file, which opened with happiness in FCP 7 (I'm at first project since a previous Final Cut Pro project) is in the following (as described in the film Inspector of QuickTime Player) format:

  Linear PCM

  16-bit little endian signed integer

  2 channels

  48000 Hz

  Although the files will not open in first, they will open in Adobe Audition, which gives their 32 bit depth (it also describes the original as "16-bit little-endian" format - I admit that this technical aspect of audio files is clear to me).

  Any suggestions of how I can coax first in import and opening these files?

  Thank you, Andrew

  After the opening of the hearing, re - save out them.  This should fix any errors of header.

• Error when importing WSDL file created in JDeveloper inside BS

  Hi all
  
  I am faced error when importing WSDL service DBAdapter created using JDeveloper inside my business service at the OSB.
  The error in OSB is "the mapped resource does not exist.

  What version of OSB are you using? Please download the schema (.xsd) files as well. WSDL has references to this pattern, but they are not downloaded from where this error. On sbconsole, if you click on a WSDL name to see a button comes with the name of "references Edit." Click on which points to the xsd, you downloaded.

  Kind regards
  Anuj

• Hi, I just upgraded from 6.1 to 6.4 LR LR. When importing new files LR6.4 cannot rename my files with a specific date format (import uses only the original name).

  Hello

  No problem with the LR 6.1, but now (LR6.4), it seems impossible to rename my files with a specific format (yyyy-dd-hhmmss and a suffix) importing memory cards. LR imports only files with names of origin. And I have a lot of files to rename...

  I hope that someone knows what's going on.

  Jean

  Jean,

  We found a similar question which is being implemented. If you shoot images at once in the first and jpg format and then import them using the option of renaming, the question is in place.

  Could you please check if you use the option "make a second copy? If so, please it deselect. It should solve the problem.

  The issue is addressed in Lightroom.

  Thank you

  Sunil

• No sound from imported m2ts file

  I imported a file in a project of first CS5.5 m2ts, containing the DTS audio and h.264 video. The audio is apparently not approved. How is it, DTS is not supported? How can I convert possibly the source?

  I don't think that you will never get the Audio DTS to import flows. I don't know about ripping the software or editing program audio that allows to efficiently extract this Audio stream, but suppose that there are some out there. If I do a DTS job, it's only for Audio extra on DVD, so have never been confronted with extract/rip it from a multiplex file. Maybe others will have a workflow and program suggestions for you.

  Good luck

  Hunt

  [Edit] If not, there is a good available extraction program, you may need to use a player that can manage the DTS and record from this, during playback. If so, save this material recorded in PCM/WAV 48 kHz 16-bit and who import the sync to the Video.

• No sound when importing. Video file M2TS in PP

  Hello I hope someone can give some insite on why I'm having this problem. I use the Hauppauge HD PVR to capture images of my DVR HD

  and I'm getting results mixed when I import in PP. The video is very good, and sometimes audio works and other times it doesn't, I left PP comform file before I try to change. Captures are @1920 x 1080 5.1 audio, if I capture with only 2 audio channels I have no problem and everything is fine but captures 2 channel audio kinda defeats the purpose to the Bluray highdef. When I view the same file that does no audio in PP with a player just plays and sounds great, so I know that the capture process is fine. Any suggestion would be appreciated!

  It is unlikely, especially with SD material. Reverse engineering AC3 encoders/decoders can often cause problems, but fully licensed are more expensive, so sometimes corners are cut to make an attractive market better/more price for certain products. Hauppauge is perhaps one of them.

• Error when importing complete file with many newspapers

  Hello

  I came across an error when you try to import an entire folder containing 118 newspapers (total size 63 MB), created by and imported to Signal Express 2012 (version 6.0.0).

  After about 80 of them have been imported without any problem, error, indicated in the attached file, see.

  The journal other files can be opened one by one after will have been delivered to market there is apparently no problem with files.

  My path to the folder that contains the log files are 81 characters long. I also tried a shortest path with only 9 characters, but it did not help.

  Looks like it's a bug in SE. Is there a solution?

  Concerning

  Jocke

  It turned out to be a bug in SigX2012. SigX opened the TDMS file handle but could not close during the import. So when a loading 118 connects at some point, SigX reached the memory limit.

  As for SigX2012, we have a solution for you. Newspapers, by half and each folder contains 59 newspapers. Launch SigX and import logs folder, and then save the recording project and exit SigX. SigX to restart and load the project you just save and import the other journal folder. Let me know if it works on your side.

  Once again, thank you for reporting the bug to us.