Help! Not clear the system specifications? Desktop compaq CQ5320Y... Want to upgrade CPU

I have a Presario CQ5320Y desktop computer and I was looking at upgrading the processor to an AMD Phenom II X 4 965 Black Edition Deneb 3.4 GHz Quad-Core, in the specification system, it says the TDP is 95 Watts, but he has forward processer mentioned, who take 125 watts according to AMD, on the list of upgradable processor. I don't know if I blow on the motherboard or if it is designed to take this particular amoun just for this processor t?  Help!


Here are the specifications of your desktop Compaq Presario CQ5320Y and its card mother M2N68-(Narra6). Based on the specifications, this model supports the following processors;

Type of socket: AM3

TDP: 95 watts

AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

AMD Phenom II X 2 5xx (Callisto)

II AMD Athlon X 4 6xx/6xxe (undactylopodite)

AMD Athlon II X 3 4xx/4xxe (Rana)

AMD Athlon II X 2 2xx/2xxe (Regor)

AMD Sempron 1xx (Sargas)

It's very clear... the system supports a subset of the list up to a maximum of 95 watts. If the CPU is valued at more than 95 watts, it is not supported. In addition, "Black Edition" processors are not listed and therefore are not taken in charge.

Please send Bravo

Tags: HP Desktops

Similar Questions

  • installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

    installed pes 2013 on laptop when you select game get error message "video card does not meet the required specifications (GPU:VRAM 128 MB)" can anyone help?

    This means what he says.  You do not have the minimum required VRAM.
    The minimum specs for the game is listed as 128 MB of VRAM, but is supposed to work
    on the graphics card integrated Intel 2000/3000.
    The amount of VIDEO memory dedicated on laptops is apparently determined by the FAB of the laptop.

    Without knowing which laptop, or if it is one that has a dedicated graphics card, I guess that your laptop uses integrated graphics that devotes too little of VRAM (64 MB?),
    If it does not the minimum requirement of 128 MB of VRAM.

  • How to clear the system (SALT) on PE1650 event log


    Can someone please tell me how it is possible to clear the system (SEL) event log on a PowerEdge 1650 server and also how to display the entries.

    I have a Poweredge 1650 and the amber light has recently started to Flash indicating a fault. I checked what is obvious and all components appear to be well, but when I run the Diagnostics tool I downloaded from Dell website, it begins to test and all first check the system event log but comes back with an error message saying FAIL cannot continue his tests "in the system event log is full and must be eliminated."

    Can someone please tell me how I can clear this log so it can then test the system, as verification of the system event log is the first test and it's not beyond the first part of the test which it is defective on the log of the events being full, this way it can then run the test further and if all goes well He will show me the problem.

    Also how the system event log is visible so I can see the Scriptures as it obviously has a problem because it fills the event log.

    Any help would be greatly apreciated.

    Thanks in advance :-)

  • Cloud creation is more open and not in the system tray... Windows 7

    I have an annual subscription to creative cloud, but it is no longer open and not in the system tray.

    I am running Windows 7 and had no problems until recently.  I still have the shortcut icon on the desktop for Adobe Creative Cloud, and when I double-click it to open it, it runs briefly in the Task Manager but then disappears with no other result (and no other Adobe applications/processes currently running in the Task Manager.

    Photoshop (or other previously installed applications) can still be opened by double click on a PSD, or finding the individual executable, but even in this case, CC does not appear in the system tray.  So, cannot use cloud or add other applications, etc.

    Any help would be appreciated

    If please OOBE and rename OOBE.old to C:\Program Files (x 86) \Common Files\Adobe & remove Adobe Creative Cloud folder in C:\Program Files (x 86) \Adobe

    Try to install the creative cloud, hopefully it should work.

  • Can not recover the Windows 7 desktop after replacing the hard drive

    I bought a new HP Pavillion Elite (HPE-240f) in August 2010. A week ago my hard drive has no SMART short self-test during systematic hardware diagnostics. I installed a new hard drive of the same size - 1 TB and could never make it work properly. I tried the following (in that order).

    1. using a system repair disc, I got the system from a previous image (which I did shortly after the purchase, install my own software and configuration of all). It worked, but then I noticed that Windows Update was not working. I ran various Microsoft diagnostic tools and discovered that some (unspecified) system files have been damaged or missing. All the fixes I tried didn't work. I ran hardware diagnostics extended, but no problem not found.

    2. I tried to restore the system to the default settings by using the original image on the D partition. At first it seemed to work, but at the last moment when the system started, I saw a message on the screen that Setup is starting services and then got a warning saying that services failed because of (unspecified) problems with hardware.

    3. I tried to restore the system from the system recovery discs and a message "system recovery disks do not support this computer."

    4. I found this Cyberlink utility on the HP website, dealing with precisely this issue. I created a CD tried and it didn't work.

    5. I found this document on the HP Web site, saying that if you are replacing a hard drive with sectors of 512 bytes with a new advanced Format (AF) drive (with areas of 4 096 bytes) and your system was manufactured before October 2010 (as mine was), you must get the new HP recovery disks. I thought I finally found the root of my problems (since the new drive is indeed AF and the old man is not) and ordered HP recovery discs.

    6. the disks arrived today, and I noticed that the version number of the software (for Windows 7 version) is almost the same as on the computer, except that the last digit is 9 on disks and 6 on the computer - I guess it's an update to deal with the problem hard drive AF. However, I get 'system recovery disks do not support this computer' error, if I use the utility from CyberLink recovery disks or not. To be on the safe side, I even used a new hard disc (new 1 TB) right out of the box (never partioned and installed previously) and connected the original keyboard supplied with the computer (I also unplugged everything except the monitor, keyboard and mouse). However, I get the same message. Just out of curiosity I tried to put back the original hard drive (certainly not in best shape, even if the system always starts with him) and still could not recover the system.

    What else can I try?

    Any help will be greatly appreciated.

    An alternative to try. > If you can read the Microsoft Windows 7 of 25-character license key attached to the Tower, you can download a Windows 7 ISO file to burn to a DVD. The version must match that on the sticker COST Microsoft. for example Home Premium

  • Structure of the event does not clear the queue after his release from the Subvi

    OK I'm not sure if this is a stupid question or not...

    I was trying just a few tips and stumbeled on this problem...

    So I created a sample (not exactly)

    In just press PressMe

    (it opens a Subvi

    There are two buttons to stop "Alt1" and "pylone2".

    To close the Sub - VI press either on "pylone2".

    or press "Alt1", then "pylone2".

    with the latter method of the value of closing change pylone2 is registered outside the while loop and after the closure of the Subvi should not it be erased? (Or should manually clear us it?)

    For this reason not clear, the second time I press 'PressMe' change the value of pylone2 even goes off before you press anything

    I can't look at your code at the moment, but according to your description, it seems that the system works as expected. I guess you do a completely static record of events (open the event configuration dialog box and select the controls and event).

    The first thing to clarify is your use of the term "registered". In this case, it's a problem, because the registration in the context of the protests means asking to receive the event when it happens.

    Now that you know it's important to understand where the recording is happening, because that's what determines which events are stored in the queue. When you use this type of static record, registration happens from the VI the event structure is in run mode (Note: this does not mean that the VI is actually running, but just that it's the of running or reserved for the race) and the cancellation of registration only happens when the VI mode of execution. Who is right for which you get the events in the queue of the previous run of the VI - the VI is still in run mode, then the event is added to the queue and still waiting in the queue until the structure of the event to run again.

    You can work around something like that by switching to dynamic registration of events, where you can unsubscribe to empty the queue at the end of the VI, but requires more code. Also, in 2013 LV there are a few features added to events that could allow to do this statically (I don't study all the additions, so I don't know if this is possible for static recording).

    There is a good presentation on the events of NIWeek 2013 by Jack Dunaway. You can find details of how to download the video here -

  • Volume control not in the system at boot tray

    Good question?  Mebbe.  Driver issue?  Mebbe.

    When I restart the computer, the volume control is not in the system tray.  If I go into Control Panel, see the volume control is checked.  If I uncheck, click on apply, check and click on apply again, it seems.

    I tried to remove the sound drivers and reinstall them but that did not help.

    Any ideas?

    Thank you.


    Try the steps of troubleshooting provided in the link below and check if the problem persists.

    Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

  • lost my card character, not in the system 32 folder, how can I get that back?

    lost my card character, not in the system 32 folder, how can I get that back?

    lost my card character, not in the system 32 folder, how can I get that back?

    It's a pretty good trick, considering that charmap.exe is one of the files that Windows File Protection is supposed to protect.

    Do a full disc search for charmap (without extension), making sure to look into the hidden files and system.

    If charmap.exe is not in C:\Windows\system32 (where it belongs), he probably is not in C:\Windows\system32\dllcache (where it also belongs).

    If you have a directory (which is common for systems with Windows) C:\i386 pre-installed, you should find charmap.ex_, which is a compressed version of the file.  You must use the EXPAND command from a command prompt window (start > run > cmd > OK) to decompress:

    Expand c:\i386\charmap.ex_ c:\windows\system32\charmap.exe
    copy c:\windows\system32\charmap.exe c:\windows\system32\dllcache

    Don't forget the space before the c:\ at two locations in two lines

    You will also find the charmap help files in C:\i386 and can expand those as well if necessary.  The expanded files should reside in C:\windows\help

  • Have inadvertently made my banks logo my background on my table, please help, not found the answer anywhere.

    Have inadvertently made my banks logo my background on my table, please help, not found the answer anywhere.


    See if this helps you:

    "Change your desktop background (wallpaper).

    See you soon.

  • How can I fix this "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." Error if please restart and try again. » ?

    I'm trying to install Microsoft FreeLancer on Windows 7 64 bit Home Premium edition (according to WinVer: Version 6.1, build 6701, Service Pack 1).

    After inserting the DVD in the drive and run "Setup.exe", I am invited by the UAC to elevate permissions - who I am agreement - then the following error message appears: "Setup was unable to find (or could not read) the language specific setup resource dll, unable to continue." If please restart and try again. »

    The only valid technote, I found the issue was The below is the list of the things that I tried after reading this technote - but no avail.

    • Of course, I tried to restart.
    • I checked the DVD is in good condition, even with regard to the attempts to install from the disc to a friend and even went up to compare the MD5 of all files on two DVDs, the checksums match.
    • I tried using the compatibility mode for XP, although according to the report of another user on the statements of the Windows Compatibility Center that this should not be necessary.
    • I ran a full "chkdsk" (i.e. one scheduled for after a reboot, rebooted) and chkdsk reported no error.
    • I deleted all files "di - use ' %TEMP%, immediately after the restart and before you run setup.exe.
    • I've looked at this the EMET tool had an exemption for 'setup.exe' and my tool anti-virus was disabled before installation.

    Everything I try seems to have no effect on the resolution of this problem.

    Can anyone suggest any possible causes of--and, ideally, solutions to-this issue?

    Kind regards


    ... "Step 1: perform the clean boot to verify if it's a software conflict matter. '...

    -Tried but not given to impact.

    ... "Step 2: System File Checker tool"...

    -Tried but not given to impact.

    ... "I would have you check the same DVD on another computer and check if it works. '...

    -The only other machine that I use Ubuntu. My other half uses only his Mac.

    I managed to work around this problem by using the following workaround solution:

    I installed Freelancer CD on a Windows XP virtual machine running in VMWare Workstation. I then moved the installation directory (C:\Program Files\FreeLancer) off the coast of the virtual machine on my Windows 7 computer in (C:\Program Files (x 86) \FreeLancer).

    The game seems to work fine as long as it is run with administrative privileges (that is, the freelancer.exe running). Without administrator rights, the games is never recorded. With them, they are registered under "C:\Program Files (x 86) \FreeLancer\EXE\Accts\SinglePlayer" successfully.

  • I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements made n

    I can't download lightroom cc because "adobe does not support the system" I use. How the hell am I supposed to know what system he supports and how do I get the system that God Adobe says that I have? Googling lightroom cc requirements does not help.

    System requirements | Creative cloud

    The system requirements (lightroom)

  • CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)


    Can someone help on this

    CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)

    I just installed esx 4.0 update, one under vmware workstation and get this error

    Try to do this:

    Client-> ESX vSphere / vCenter-> left click on the ESX Server-> Configuration-> advanced-> vmkernel.boot.usenumainfo-> Vmkernel-> uncheck the box (this may require a restart if she does not take effect immediately)

  • Could not locate the system volume

    I have a very similar problem that has been published before; However, the posted solution worked.

    I can't find in the newspapers, what is actually wrong.  If anyone can help, I'd appreciate it.

    "Then the conversion of a server to ESX 3.5 Server 2003 I received this message after only 95% complete.". Failure of the Reconfiguration of the error. With the State: FAILED: could not find the system volume, reconfiguration is not possible.

    I use VMware vCenter Converter Standalone 4.0.1"

    Newspapers reported the following errors (which are equivalent):

    Impossible to reconfigure a source that doesn't have a system volume


    It seems that there are 2 physical disks in the system

    > Drive:
    . \PhysicalDrive0 a type of adapter: 1

    > Drive:
    . A type of adapter \PhysicalDrive1: 1

    Converter is to see the C:\ as long as the system volume, but there is no active flag set on it.  The second disc is recognized, but according to it's Converter:

    > is a dynamic volume. No significant partition information may be associated with him

    So, it looks like there's a mirror of software on the source physical system or the original system was dual boot between something like Windows 2008 and 2003 Server.

    If it's a mirror of the software, you can:

    -remove the mirror and conversion

    -Use gparted on the virtual machine to set start-up/active at the first vmdk file flags, and then reconfigure the virtual machine via converter

    If it is a dual-boot configuration, then I do not think that it is supported.

    Kind regards


    VMware vExpert 2009

    NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

  • Help me choose the HP Pavilion Desktop PC


    Please help me choose the HP Pavilion Desktop Pc which has 3 features-

    1 150 - 200W power consumption.

    2. easily extensible.

    3. must have Windows 7 Upgrade offer with it.

    I'm of the India, I chose only the PC models to choose among them.

    Kind regards


    HP Pavilion dv6516tx Intel Core 2 Duo T5250, 2 GB DDR2, 160 GB SATA, Nvidia GeForce 8400 GS, Segate wireless LAN, remote Media Center, Windows 7 Ultimate OEM, Authentec fingerprint reader.
    HP Pavilion m9430in Inter Core 2 Duo E7300, 4 GB DDR2, 1.5 TB Seagate SATA, Nvidia GeForce 9300 map THE, WLAN, TV Tuner, DVB - T integrated with remote control, wireless HP keyboard - mouse, 2309 m TFT LCD, Windows 7 Home Premium OEM.
    HP Pavilion p6040in Inter Core 2 Duo E7400, 3 GB DDR2, 500 GB Seagate SATA, THE Nvidia GeForce 7100, LAN, wireless keyboard - mouse, HP 2009f TFT LCD, Windows 7 Home Basic OEM.

    Already a customer of HP for the past 6 years. HP has impressive Technical Support (phone Support + Service Center Support) - India

    I have the following models-

    1 HP Pavilion Elite m9430in PC with HP Full HD 2309 m LCD TFT (Brilliant ++ purchase ever)

    2 HP Pavilion Notebook dv6500tx

    And the new that I bought last week is -.

    HP Pavilion p6040in with HP Full HD LCD TFT 2009f.

    A big thank you to everyone for their suggestions!

    Kind regards


  • I lost my WiFi signal after having placed a time Capsule in the system. Now the Airport Extreme will not recognize the system. Any ideas?

    Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.

    Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.

    What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?

    Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?

Maybe you are looking for

  • iPhone will not connect to my wifi

    I did no update. This morning all of a sudden my iPhone does not connect to my wifi. As there is a block or? on this subject. Weird

  • Whats an OP?

    I ask how to get a substantive theme for the new tab page, and the answers say, when the OP opens? So, how do a background theme for the new tab on the page.Thanks people, I love Firefox.

  • How to exclude software is inaccessible from SDM

    I'm trying to remove some software, we don't use SDM so that it never installed on any computers screw SSM. Examples: HP protect tools, McAfee Total Protection ect. Face recognition software (our laptops don't have webcams) Manager software, Hp suppo

  • Why I can't access "clear recent history" in the Tools menu?

    When I use the drop down menu to the tools, I can not use "clear recent history" or "stop private browsing' because when I click on it nothing happens and they aren't printing darker than the other menu listings. I have been having this problem for a

  • System removed

    I am currently connected with a 'temporary' profile and cannot access my files or programs.  I can implement new applications, but the warning message indicates that they will be deleted when I go out.  The warning message says wait and try again. Th