HELP of Cisco MOVI
Dear,
I have the Starter Pack of VCS Cisco implemented in my office with double network interface but I'm using only a single port network and his teeth to one ip address public static address and endpoint of c60 who is regesterd for vcs I have, and I can access my VCS on the internet via the public ip or domain in any case FULL name address I have a cisco MOVI installed in my house, I have followed cisco vcs starter pack deployment guide and I managed on the basis of rigester my movi of VCS, but when I try to call C60 endpoint I see the call is connected, but I get no audio and video.
Please note that I am not an expert here, is there any other configuration as CLI commands that must be there please advise I only followed the Deployment Guide
Commissioning doesn't have an internal external model like you would with TMS.
You must therefore also a split DNS if you do not use both interfaces with commissioning.
But when you deploy it appropriate also a model with the external ip address (with or without NAT, but always
to connect to the external ip address) and the second interface on the network internal.
I just use the public IP directly on the first interface and connect with all customers to the public ip address.
(If your router supports to connect to IP using NAT outside that should also work).
Please remember useful frequency responses and identify useful or correct answers.
Tags: Cisco Support
Similar Questions
-
Helping compress large mov for vimeo! Thank you!
Hello, I have a mov 2.69 GB 60 min 1280 x 720, exported to FCPX as a default master file I want to compress & download on vimeo. I tried different settings in compressor - video sharing in 720 p, 1080 p & 540 p and each created a file size of 4.03 GB. I also tried "publish to vimeo" setting which took 3 hours to upload to 5%. Any suggestions gratefully received. I have more the original PCF file.
Thanks a lot for your help!
Please open the 2.69 GB file in QuickTime format and open the movie with the Hotkey Cmd - i Inspector. Then post a screenshot of the Inspector's report.
Russ
-
Need help with copy/move programs and Admin files to other users of the account.
I created 'connect users of accounts' and 'lost' the original Admin, now I know how to access certain programs and others in shift, click with the right button on connection as an administrator. but can't seem to copy or move some things into "shared folder" can someone help me please? Thanks for any help! No real computer smart right now, but im learning :)
Hello
You can also try to connect to the original administrator account by pressing CTRL + ALT + DELETE (all three keys twice at the same time), you will get the classic login prompt. Type the administrator user name and password. You should be able to connect.
To activate this visible account to the Welcome screen, once logged in click on Start-> Run Type &-> Regedit-> ok.
Navigate to HKEY_LOCAL_MACHINE-> SOFTWARE-> Microsoft-> Windows NT-> CurrentVersion-> Winlogon-> SpecialAccounts-> UserList
Select the username administrator and set the value to 1-> of the close Registry Editor and restart your computer.
I hope this helps.
-
Support stand not provided my replacement WRT-ngn350 - need help with Cisco contact
Hello!
I'm starting to feel like Michael Douglas in the movie Falling Down and need help.
History:
Finally, I sent to my bad WRT-ngn350 router and when I got the replacement of all but the plastic leg support has been included. I want to have my router stand up to save desktop space, but now I have no foot."OK, should not be difficult to get Linksys to send me the missing foot stand" was my thought. Now, I called the online RMA and also emailed them and I get a similar response as Michael Douglas took with a smile
I hear that I can't get the part because it is not on the list the content of the product. As this is * my * problem. I want the part and do not care if it's on a list or not. It is the part on the router in the image. I even asked the representative of Linksys to Google a little bit WRT-ngn350 and there are foot stands on almost all of the images and it is certainly included in the box. I was told that I could go nowhere elsewhere to help with that. I really some doubt but fail to find a channel of Linksys, which may be able to help.
If some representative of Linksys sees this please help me!
Thanks, Niklas
RMA XXXXX - lack of router support/foot
(Mod Note: under the guidance of the compliance of the directive.) E-mail deleted conversation.)
SOLVED!
The representative of Linksys has managed to dig a booth for me to a warehouse. It is mentioned that it is a unique thing because some parts should be sent. Don't forget to remove the stand and send only: router, power and eventually cable NW.
Thanks to Linksys representative.
-
I need help setting up a Cisco PIX 506th Version 6.3 (5)
I use the PDM to configure the device, because I don't know enough of CLI. I want to just the simplest of configurations.
Here is what is happening, I set up then I hang the Interface 1 to my laptop and use DHCP to get an ip address, but I can't get out to the internet like that. Thanks PDM tools, I can ping outside the IPS very well.
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of DkreNA9TaOYv27T8
c4EBnG8v5uKhu.PA encrypted passwd
hostname EWMS-PIX-630
domain ciscopix.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
object-group service udp test
port-object eq isakmp
inside_access_in ip access list allow a whole
access-list inside_access_in allow a tcp
access-list inside_access_in allow icmp a whole
Allow Access-list inside_access_in esp a whole
inside_access_in tcp allowed access list all eq www everything
inside_outbound_nat0_acl list of permitted access interface ip inside 10.10.10.96 255.255.255.240
inside_outbound_nat0_acl ip access list allow any 10.10.10.192 255.255.255.224
pager lines 24
timestamp of the record
recording of debug trap
host of logging inside the 10.10.10.13
Outside 1500 MTU
Within 1500 MTU
IP outdoor 75.146.94.109 255.255.255.248
IP address inside 10.10.10.250 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 10.10.10.1 255.255.255.255 inside
location of PDM 10.10.10.13 255.255.255.255 inside
location of PDM 10.10.10.253 255.255.255.255 inside
location of PDM 75.146.94.105 255.255.255.255 inside
location of PDM 75.146.94.106 255.255.255.255 inside
location of PDM 10.10.10.96 255.255.255.240 outside
location of PDM 10.10.10.192 255.255.255.224 outside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 0 0.0.0.0 0.0.0.0 0 0
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 75.146.94.110 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-RADIUS (inside) host 10.10.10.1 server timeout 10
AAA-server local LOCAL Protocol
Enable http server
http 10.10.10.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
ISAKMP allows outside
ISAKMP peer ip 206.196.18.227 No.-xauth No.-config-mode
ISAKMP nat-traversal 20
ISAKMP policy 20 authentication rsa - sig
encryption of ISAKMP policy 20
ISAKMP policy 20 md5 hash
20 1 ISAKMP policy group
ISAKMP duration strategy of life 20 86400
part of pre authentication ISAKMP policy 40
encryption of ISAKMP policy 40
ISAKMP policy 40 md5 hash
40 2 ISAKMP policy group
ISAKMP duration strategy of life 40 86400
ISAKMP policy 60 authentication rsa - sig
encryption of ISAKMP policy 60
ISAKMP policy 60 md5 hash
60 2 ISAKMP policy group
ISAKMP strategy life 60 86400
Telnet 10.10.10.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 10.10.10.2 - 10.10.10.5 inside
dhcpd dns 68.87.72.130
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd allow inside
btork encrypted Ww3clvi.ynWeGweE privilege 15 password username
vpnclient Server 10.10.10.1
vpnclient-mode client mode
vpnclient GroupA vpngroup password *.
vpnclient username btork password *.
Terminal width 80
Cryptochecksum:5ef06e69c17b6128e1778e988d1b9f5d
: end
[OK]any HEP would be appreciated.
Brian
Brian
NAT is your problem, IE.
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 0 0.0.0.0 0.0.0.0 0 0presumanly first NAT is fot your good VPN that acl looks a little funny, what exactly are you doing with that?
The second NAT is the real problem but for outgoing internet access - the NAT statement, you said not NAT one of your addresses 10.10.10.x which is a problem as 10.x.x.x address is not routable on the Internet.
You must change this setting IE. -
(1) remove the second NAT statement IE. "no nat (inside) 0 0.0.0.0 0.0.0.0.
(2) add a new statement of NAT - ' nat (inside) 1 0.0.0.0 0.0.0.0.
(3) add a corresponding statement global - global (outside) 1 interface.
This will be PAT all your 10.10.10.x to external IP addresses.
Apologies, but these are some CLI commands that I don't use PDM.
Jon
-
With the help of Cisco ACS 5.2 (GANYMEDE +) with other than Cisco devices
Hi all
I was hoping that someone could help me with what might be a silly question. I'm trying to implement a solution whereby an operator can control all their nodes (other than Cisco) network via GANYMEDE + involved nodes are
Juniper M10i running Junos 9.2, M120
M320 running Junos 8.5 Juniper
Extremes of BD8810 and BD8806 running 12.4.1.17 XOS
3804 Alpine extreme Extremeware 7.8.3.5 running
My question is, can I use Cisco ACS 5.2 (or 4.2) to authenticate using GANYMEDE + to these other than Cisco devices. Has anyone else done this or I have to use RADIUS? If someone has done this are problems of interoperability with Cisco CS and Junos or XOS extreme. Thank you
/ John
John,
We have a very large deployment of Juniper (T-series, series MX, etc.). We use Cisco ACS and GANYMEDE to manage these devices. The configuration of the ACS is fairly simple. You'll want to create users to connect and match them to the classes on your JUNOS routers. Here is an example:
set system login user uid of engineering 2000
Set system login user engineering genius-class class
set the connection user uid to NOC 2001 System
Set system login user AC AC-class classdefine the system connection Engineering-class idle-timeout 15
define a connection system class engineering-class permissions all
define the system connection AC-class idle-timeout 15
define the connection class AC system class view permissions
Set connection AC-class permissions see the system configurationWe use two classes of genius and NOC. One is defined as a read / write and the second read-only. This is in turn then mapped in ACS (in our case version 4.2) by user or group (preferred). First, you change the configuration of the interface and add a Ganymede junos-exec service and do not enter the Protocol field. Then, you change the attributes of the user group. I've attached screenshots for both on this subject.
Hope this helps.
Derek
-
Need help on Cisco UCS Certification
Hi all
I need your help.
I intend to take the certification Cisco UCS. Please help me on this I am confused that you take as it is DCUCI or guide DCUCD please if it is DCUCI how to start and if DCUCD how to start.
Currently working on vmware support and little UCS. I am after reading docs, and communities through videos from train signal UCS.
Can some expert guide please, how further will be a great help
Thanks in advance
Vincent
Vincent,
Since how long did you ask? I want to mention that CCNA/P DC was relesed in November, before a review as DCUCI was a full certification and it is now part of the CCNP instead.
CCNA has 2 reviews, DCICN & DCICT
I couldn't find a link where it is specifically stated that you must follow a specific order, for example here:
http://www.Cisco.com/Web/learning/certifications/specialist/DC/uc_support.html you can find specialized support requirements are:
642-999 DCUCI (one of the basic tests I mentioned) & DCUCT 642-035 (one of the troubleshooting tests I mentioned as well)
For CCNA, there is no choice, only 2 exams available, it does not matter for CCNP, but 4 you access CCNP, different combinations will give Add tax certifications.
However, keeping in mind the names of examinations, which can give you an idea of what you want to learn first:
DCUCI: implementation of Unified Computing DC
DCUFI: implementation of DC Unified Fabric
DCUFD: Data Center Unified Fabric Solutions Design
DCUCD: Data Center Unified Computing Systems Design
DCUFT: Troubleshooting Cisco Unified Fabric data center
DCUCT: Troubleshooting Cisco Unified Computing data center
I hope this helps clarify.
-Kenny
-
Newbie Help Needed: Cisco 1941 router site to site VPN traffic routing issue
Hello
Please I need help with a VPN site-to site, I installed a router Cisco 1941 and a VPN concentrator based on Linux (Sophos UTM).
The VPN is established between them, but I can't say the cisco router to send and receive traffic through the tunnel.
Please, what missing am me?
A few exits:
ISAKMP crypto to show her:
isakmp crypto #show her
IPv4 Crypto ISAKMP Security Association
DST CBC conn-State id
62.173.32.122 62.173.32.50 QM_IDLE 1045 ACTIVE
IPv6 Crypto ISAKMP Security Association
Crypto ipsec to show her:
Interface: GigabitEthernet0/0
Tag crypto map: QRIOSMAP, local addr 62.173.32.122
protégé of the vrf: (none)
local ident (addr, mask, prot, port): (192.168.20.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (192.168.2.0/255.255.255.0/0/0)
current_peer 62.173.32.50 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 52, #pkts decrypt: 52, #pkts check: 52
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errors
local crypto endpt. : 62.173.32.122, remote Start crypto. : 62.173.32.50
Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0
current outbound SPI: 0x4D7E4817 (1300121623)
PFS (Y/N): Y, Diffie-Hellman group: group2
SAS of the esp on arrival:
SPI: 0xEACF9A (15388570)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 2277, flow_id: VPN:277 on board, sibling_flags 80000046, crypto card: QRIOSMAP
calendar of his: service life remaining (k/s) key: (4491222/1015)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE
Please see my config:
crypto ISAKMP policy 1
BA 3des
md5 hash
preshared authentication
Group 2
encryption... isakmp key address 62.X.X... 50
ISAKMP crypto keepalive 10 periodicals
!
!
Crypto ipsec transform-set esp-3des esp-md5-hmac TS-QRIOS
!
QRIOSMAP 10 ipsec-isakmp crypto map
peer 62.X.X set... 50
transformation-TS-QRIOS game
PFS group2 Set
match address 100
!
!
!
!
!
interface GigabitEthernet0/0
Description WAN CONNECTION
62.X.X IP... 124 255.255.255.248 secondary
62.X.X IP... 123 255.255.255.248 secondary
62.X.X IP... 122 255.255.255.248
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
card crypto QRIOSMAP
!
interface GigabitEthernet0/0.2
!
interface GigabitEthernet0/1
LAN CONNECTION description $ES_LAN$
address 192.168.20.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
automatic duplex
automatic speed
!
IP nat pool mypool 62.X.X... ... Of 122 62.X.X 122 30 prefix length
IP nat inside source list 1 pool mypool overload
overload of IP nat inside source list 100 interface GigabitEthernet0/0
!
access-list 1 permit 192.168.20.0 0.0.0.255
access-list 2 allow 10.2.0.0 0.0.0.255
Note access-list 100 category QRIOSVPNTRAFFIC = 4
Note access-list 100 IPSec rule
access-list 100 permit ip 192.168.20.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 101 permit esp 62.X.X host... 50 62.X.X host... 122
access list 101 permit udp host 62.X.X... 50 62.X.X... host isakmp EQ. 122
access-list 101 permit ahp host 62.X.X... 50 62.X.X host... 122
access-list 101 deny ip any any newspaper
access-list 110 deny ip 192.168.20.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 110 permit ip 192.168.20.0 0.0.0.255 any
!
!
!
!
sheep allowed 10 route map
corresponds to the IP 110
The parts of the configuration you posted seem better than earlier versions of the config. The initial problem was that traffic was not in the VPN tunnel. That works now?
Here are the things I see in your config
I don't understand the relationship of these 2 static routes by default. It identifies completely the next hop and a mask the bytes of Middleweight of the next hop. Sort of, it seems that they might be the same. But if they were the same, I don't understand why they both make their appearance in the config. Can provide you details?
IP route 0.0.0.0 0.0.0.0 62.X.X... 121
IP route 0.0.0.0 0.0.0.0 62.172.32.121
This static route implies that there is another network (10.2.0/24) connected through the LAN. But there is no other reference to it and especially not for this translation. So I wonder how it works?
IP route 10.2.0.0 255.255.255.0 192.168.20.2
In this pair of static routes, the second route is a specific subnet more and would be included in the first and routes for the next of the same break. So I wonder why they are there are. There is not necessarily a problem, but is perhaps something that could be cleaned up.
IP route 172.17.0.0 255.255.0.0 Tunnel20
IP route 172.17.2.0 255.255.255.0 Tunnel20
And these 2 static routes are similar. The second is a more precise indication and would be included in the first. And it is referred to the same next hop. So why have the other?
IP route 172.18.0.0 255.255.0.0 Tunnel20
IP route 172.18.0.0 Tunnel20 255.255.255.252
HTH
Rick
-
Hello
I wonder how do I know the total number of licenses for Cisco Jabber Movi of TMS?
Hello NeyBa-
You can find the license numbers of commissioning available and used in TMS by going to:
Administrative Tools > Configuration > General settings
It is located near the bottom of half of the page, just above the keys installed option.
-
Help! Drag / move does NOT work!
Hello - I'm using a simple drag and drop quiz, but it does NOT work correctly . When I play the movie, the mouse takes the movieclips but never falls, even when they are in a target area. Help, please! I have attached my FLA - any help would be much appreciated!
Thank you.
Just for starters, you change startDrag line to be: event.target.startDrag (false);
Then see what's left more questions. While I had other changes at different times, changing only one line was let down when I let go.
-
only to learn... helps on the movie clip buttons
I tried tons of tutorials and I can't seem to get my movie clip button to work when I put the mouse over the button.
I've included a screenshot of my line of time and code.
Layer 10 Framework 1 where is the script.
layer 'actions' has my codes 'stop' in frames 1 and 20
code and schedule
Thanks for your help.replace 'home' with 'this '. and if the compiler complains about your code in e.currentTarget as a MovieClip.
-
To save space on my Macbook Air, I want to spend all the music a laptop Samsung 250 GB drive.
On the laptop, I tried to drag the iTunes folder to the portable player. A message says that there is not enough room.
How can he not have enough room? My iTunes library is about 56GB.
I've deleted all backups on the Samsung for free space, but still not enough space message.
If I have iTunes game, is to go all my music to iCloud I have to do? I would like to access my music on all my Apple devices.
Any help is appreciated, thanks.
Select the samsung desktop drive icon.
Press CMD + i
How much free space is on the drive?
-
Help! CISCO WAP54G BUTTON
I had my WAP54G for about six months... works very well, but I accidentally pressed the CISCO while wiping clean logo and now it does not work! I tried to reset and nothing not past, .the installation disk keep saying that a wireless access point is not found... and modem/router from my phir no longer sees the WAP54G connection.
Now what?
Manny
I agree with Fredz... As reset you the router, now you must re - configure WAP from scratch. Try the link provided by Fredz and you will be able to configure your Access Point.
-
I'm doing a project at the moment to help widows live movie maker...
I am doing a project at this time using windows live movie maker for windows 7. In College, they use Windows XP.
Director of Windows. So when I do my homework and then try to open it on Windows XP at the College, it does not open.
What can I do? Thanks, Hilda
Live Movie Maker. WLMP project files are not
compatible with XP, Movie Maker. So, you will not
be able to continue to edit the project WLMM in
XP, Movie Maker.One possibility would be to Save the Live Movie Maker
the project in the. Video format WMV and you should be
able to play the video in Windows Media Player
the XP system. You can even try to import the. WMV
movie in XP Movie Maker file just as you would for any
another video file.How to save the project in Windows Live Movie Maker
http://www.YouTube.com/watch?v=ZyqZm5MBc7oGood luck...
-
When I play the avi file, Movie Maker will appear not video although I can hear the audio. There is no problem with wmv and mpg files. So how to view avi files?
I have Windows Movie Maker 6.0 and it came with Vista on the computer I bought. Thank you.
When I play the avi file, Movie Maker will appear not video although I can hear the audio. There is no problem with wmv and mpg files. So how to view avi files?
I have Windows Movie Maker 6.0 and it came with Vista on the computer I bought. Thank you.
=========================================
It might be worth a try to download and install
a pack of codecs:(FWIW... it is always preferable, if you create a system restore
point before installing any software or updates).* Proceed at your own risk *.
K - Lite Codec Pack (full)
http://www.filehippo.com/download_klite_codec_pack/Good luck...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
Maybe you are looking for
-
ieatch. Sports watch just went blank. It is fully charged. Will not come. Tried to release the side button. Tried to fix the charger. Nothing works. Can anyone help? Thank you.
-
Download plans of fertilizer Talk
HHey guyz, someone has already tried to downloa Straight Talk for an iPhone 5 will not my Sim Card except # and invite you to call me. Offices closed English speaking! Pretty sad Memorial weekend and I am a veteran! Tracphone typical scam marketing t
-
I have two users put in place on a macbook air. Each user has his own iPad and their own identifier apple. Each user gets their own storage 5 GB iCloud?
-
Open the Numbers ' 09 docs in iPad app?
Have made a sizeable worksheet in Numbers ' 09. I'll be able to open in the application of number of iPad? Thank you.
-
Disable Outlook as default e-mail
How to disable the outlook mail as my default, in other words, how can I make my gmail account my default link when on the internet and to select an e-mail link that I found? At the moment it by default Outlook, and I tried all settings on IE and my