Help on Checksum error, BIOS freezes... Windows XP

Similar Questions

• Pavilion p7 - 1227c: checksum error BIOS error

  When I launched HP Support Assistant, I received a notice of updating the Bios from the tab "updates to the updates and".  When I tried to follow the instructions I got 7-BIOS checksum error during installation of HP

  My current system bios is 7.07.

  What I do need to update or was it a mistake?

  It's just a warning... Please see the document from the following link that helps you solve this error message:

  http://support.HP.com/us-en/document/c01368145

• Need help with the error code Udates Windows 0 x 80070424

  Hi, can someone give me some advice on how to enable Windows Auto Udates back, they seemed to have close the cottages and after trying to use all the options available I knew I am now facing an error code when I try to use the Microsoft Web site myself to get them. He responds just error Code 0 x 80070424. Thanks, any help would be great so if you "ve had this problem before or heard about what's going on could you please send me one. Brad

  See: http://support.microsoft.com/kb/968002

  -steve

• Can anyone help with 66A error when running Windows Update?

  Hello. I'm trying to update Windows with an important update, but every time I try it says update failed and gives me an error 66A. Any suggestions? Thank you.

  RobertGallo,

  See the MVP MowGreen response to a previous post, involving the error:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/error-code66a-installing-updates-please-help/b716e9f3-1a83-E011-9b4b-68b599b31bf5>

  05/22 / 1112:38: 48 pm

• Need help with the error Code 80244019 Windows Update

  From: Doug

  I get code 80244019 whenever I try to use Windows Update. I tried to change the DWORD in regedit nothing helps... Norton has recently found and 'resolved' trojan.zlob in 128 files in the registry, 21 cases (10 of which were in system32) and 1 browser cache. Whenever I try to use IE to go to http://windowsupdate.microsoft.com I am redirected to msn.com.

  Any advice or solutions would be welcome.

  From: PA bear [MS MVP]

  Chances are that ZLOB was not completely removed and she was accompanied by infections Vundo and SDBot variant, all protected by a rootkit infection. You are going to need specialized assistance to clean this machine,

  Unexplained computer behavior may be caused by deceptive software

  http://support.Microsoft.com/kb/827315

  Run a check of /thorough/ for hijackware, including post your hijackthis on a proper forum log.

  Verification / help with Hijackware

  http://aumha.org/a/parasite.htm

  http://aumha.org/a/quickfix.htm

  http://aumha.NET/viewtopic.php?t=5878

  http://wiki.CastleCops.com/Malware_Removal_and_Prevention:_Introduction

  http://MVPs.org/winhelp2002/unwanted.htm

  http://inetexplorer.MVPs.org/data/prevention.htm

  http://inetexplorer.MVPs.org/tshoot.html

  http://www.MVPs.org/sramesh2k/Malware_Defence.htm

  http://defendingyourmachine2.blogspot.com/

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  When all else fails, HijackThis v2.0.2

  (http://aumha.org/downloads/hijackthis.exe) is the tool to use.

  It will help you to identify and remove any hijackware/spyware with

  assistance of an expert.  * Post your log to

  http://aumha.NET/viewforum.php?f=30,

  http://forums.Spybot.info/forumdisplay.php?f=22,

  http://CastleCops.com/forum67.html, or other appropriate review bodies

  by an expert in the field, not here.* *.

  If the procedures look too complex - and there is no shame in admitting

  isn't your cup of tea - take the local machine, good reputation and

  independent computer repair shop (i.e., not BigBoxStoreUSA).

  --

  ~ Robear Dyer (PA Bear)

  Another response of the community of Windows Vista discussion groups

• Impossible to install an update from windows. Error message is - Windows Update error 80073712

  MS wrote to install my DVD of microsoft, but I did not.   I don't think I had one for the last 3 computers I've owned.

  I made a disc repair system if that helps and you have run the MS malicious software tool and the update tool.

  So far I have not found anything that even begins to point me in the right direction to solve this problem.

  The computer is a gateway. NV 59 laptop w/windows 7 and 64-bit i5 processor

  The update is;

  Microsoft MS10-034 security bulletin - Cumulative Security Update critical Kill bit ActiveX (980195)

  any help would be great.

  ankles,

  See if this sugesstion can help you:

  Error 80073712 with Windows in Windows Vistahttp://www.windowsreference.com/windows-vista/error-80073712-with-windows-updates-in-windows-vista/updates >

  The "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive the "0 x 80073712" error code when you try to use Windows Update http://support.microsoft.com/kb/931712

• HP model #A6000n Bios Checksum error after update Bios!

  I did update the Bios posted on the Hp website... After the reboot, all I get is this error, "BIOS Checksum Error", the black screen then looks for a boot diskette drive (this computer has not), then it looks for a boot on the CD drive disc.  Now, I talked to HP support and they say I have to order the recovery disks.  Someone can send me a bootable file that I could burn it to a CD for this model machine and get it operational?  I have an older machine here that would allow me to make a bootable CD, but I have no idea where to find some sort of update of the BIOS and or file bootable to Flash the BIOS.  I am so angry that HP wanted me to buy this CD recovery program has just returned in Windows Vista.  But, I don't know what to do because the update of the BIOS must have been corrupted when I flashed the motherboard ASUS.  This computer is my aunts and she failed to save restore disks and now I'm lost as to lift this thing up and running... Help, please!

  Thank you!

  As I said, if you have a floppy is easy, especially since the computer diskette is XP. OK, let's go.

  (1) place the disk in the drive

  (2) open my computer and right-click on the floppy drive

  (3) choose the format on the menu that appears

  (4) put a check mark in the box "create an MS-DOS startup disk".

  5) click on 'start '.

  When 6) filled the awdflash.exe on the diskette copy

  (7) right click on the file of BIOS from HP

  (8) to move the mouse cursor in 7 - zip and click "open archives".

  (9) double click on the folder icon in the new window

  (10) right click on the ROM file - in this case 513. ROM

  (11) choose "copy to" from the menu and browse it on the floppy

  (12) when it is completed, the disk should be ready to work

  (13) move the floppy drive cable and the Ribbon in the Vista computer.  He didn't need to be mounted, but make sure that it does not touch something metal (participation of books will be good) and connect the water and the power supply to the motherboard and the power of the Vista computer (of course, it is done with both computers turned off and unplugged)

  Now ready to go on the Vista computer. When you press the power button on the computer, there will be a splash of HP come screen upward.  From this screen, press her "enter the BIOS' or 'Boot to install' as shown.  I forgot to ask if this screen appears in the previous posts.  If this screen does not appear then it will be much more difficult.

  When in the BIOS, look for boot order and then set it can boot from the floppy first.  Save the selection to get out.

  (14) reboot - should end up with a cursor blinking in the upper right

  (15) type AWDFLASH 513 rom/py/sn/cc , and then press ENTER.

  (16) when and if he finished power down and remove the drive from the computer disk

  That should do it.  If this does not work or there are problems come back with an explanation of what was happening.

  Of course, to do this at your own risk.  I'm just trying to help.

  
  

• BIOS rom checksum error

  I have a bios rom checksum error on my hp pavilion a6530f. I replaced the battery on the motherboard and reset the CMOS but it still shows the black screen of death with the messages.

  BIOS ROM checksum error

  IDE ATAPI device detection...

  Found CDROM, try to start her... In case of failure

  Detecting A floppy drive media...

  Insert system disk and press enter

  and beep every few seconds.

  I do not have a system disk and when I try to press F10 or F1 to access the window with the version of the bios information, according to the instructions I found on the HP site, nothing happens. I can't also find a download for any bios drivers for my pc on the Web site.

  Before this past that I have had some freezing problems and a lot of questions of adware.

  I used to operate and maintain fuji printing and developing of films but I'm kinda a tyro when it comes to PCs.

  Is that mean that the motherboard is fried? Or if not, where can I get the download that I need to solve this problem?

  Hello again cienerose,

  If you type the F10 at startup and nothing is happening on your computer (you don't get in your BIOS) then the problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.
  
  I want to thank you for display on the HP Forums. Have a great day!

• HP divided x 2: BIOS Checksum Error (502) HP Split x 2

  A couple of days, I turned on my laptop (product number: G6Q88UA-#ABA) to see a black screen with white text saying he had a (502) BIOS Checksum error and press ENTER to reset the values and continue with my system startup. Once, I have to update to the current time. As the days passed, I noticed that I was unable to turn on my laptop without plugging it into the wall, and disconnect it would cause my computer turn off and therefore lost all of my work (and time settings). My poking around led me to him or the other being the CMOS battery, or a corrupted BIOS. I believe that my BIOS is up to date, and my model does not appear to be a CMOS battery.  Can anyone help? Thanks in advance.

  Hello @MValdiv,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I came across your post about the BIOS and wanted to help!

  I have not seen a BIOS update for the operating system Windows 10 of your product.  You can try to install the BIOS for Windows 8.1.  Also, try to review the following document and let me know how it goes: HP PCs - BIOS HP Application selected is corrupt or missing

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Have a great day!

• Checksum error message incorrect A250 aftetr Bios Update on Equium A100

  I received the message 'bad checksum A250' to restart after update Bios on Equium A100 - psaa4e Windows XP home sp3.

  Update 20070709121820 installed BIOS downloaded through this Web site.
  I installed directly from the downloaded file.
  System seems to not operate normally if have I messed up anything?

  Hello

  This message always appears during the clean boot procedure or it appeared only once?

  Generally 'bad checksum' error message if the CMOS battery does not work correctly.

  But I have no idea why you get this message after update BIOS... Anyway if the laptop works correctly after updating the BIOS then you should t be worried.

  See you soon

• BIOS rom checksum error does not start

  Compaq

  will not boot at all

  When I turn it on it automatically goes to a black screen that says:

  Award Bios BootBlock v1.0

  Copyright (c) 2000, price Software Inc.

  BIOS Rom checksum error

  keyboard err or no keyboard present

  IDE ATAPI device detection...

  Found CDROM tries to boot from the pass it...

  can anyone tell if this can be fixed if it can and you know I would appreciate it a lot

  Oh and I got a windows vista disc to see if it downloads it, but just on the same screen

  The "boot block" needs to load the rest of the BIOS of a memory chip. Since it doesn't, either the battery on the motherboard (a piece the size of a $0.25 coin silver) has failed, either the content of the memory chip cannot be read.

  Replacing the battery is fairly easy.
  First of all, notice the writing on the top of the battery.
  You will need to put the new battery into the socket,
  with similar writing facing face up into the socket.
  Look on the edge of this battery to a small 'finger' which holds the battery in its socket. Push this "finger" of the Center, and the battery must be able to be raised.
  Remove the accumulator at any computer store and get a replacement.
  Insert it, and then try again.

  If the problem persists, then either he must:
  * Replace the motherboard
  * replace this chip memory (which can be soldered on the motherboard at all times).
  * replace the computer, taking the disc drive of the old computer and its connection as a 'slave' the drive in the new computer.
  * take your computer to an expert technician.

  The attempt to boot from the CDROM is a process "emergency", to use when you have a specially created CD disc that contains a copy of the software to load into the memory of the BIOS chip. It is not a 'normal' start (to load the Vista disc).

• Boot fail error bios checksum after bios update

  Oh, im so nervous I "update" the bios of my Compaq SR5027CL with this http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-66758-1&lc=en&dlc=en&cc=us&...

  I have download and run this patch and the program tells me that the bios has been updated sucefully and push me to restart, so I click ok to restart, but now doesn't boot men, does not show the compaq logo, no nada, shows only a black screen with messages following:

  BIOS AWARD 2000

  BIOS CHECKSUM ERROR...

  TRIYING TO BOOTING FROM A FLOPPY...

  TRIYING TO BOOTING FROM CDROM IDE...

  BOOT DISK ERROR BLAH BLAH BLAH AND THEN BEEPS SOUND, THEN SHOWS

  TRIYING TO BOOT FROM THE DISKETTE HAS...

  that can make an i?, please help me

  Hi Louis,.

  I see that the options for the F1 / F10 and F5 do not appear. I do not recommend that you try the AFUDos BIOS disk once. I have researchedthe plug on your motherboard and you are right. The BIOS for motherboards series M2N68 ASUS sitewill not help because they have a different chipset, The ASUS motherboards using chipset from Nvidia 630A instead of the Nvidia 430 chipset on the motherboard Hp used to your motherboard.

  Here is a link to the solution to the problem on the motherboard you have. I downloaded HP SoftPaq Download manager to see if I can locate the SoftPaq you need with the original BIOS 513 file. bin. I'll let you know how it goes. If I succeeded, I'll explain how I got the file you can do the same thing. You will need WinRAR to extract the BIOS file, once we find the sucker. The BIOS 514 bin file is the one who caused your problem. You must also Awdflash.exe worm 8.59E. The link located in the forumthat I hyperlinked to above.

  Update:

  I found the SoftPaq file appropriate in the HP website. You will need to follow precisely the instructions provided in the first hyperlink above. It's possible!

  Kind regards

  Eric

  Published by erico on 14/01/2009 14:12

• Desktop M8000 giving Bios Rom Checksum Error

  Hello

  My brother-in-law gave me their old tower to see if I could not going again for their children to use, the decent machine actually, he had 2 internal hard drives in it and he said it was more than ever and lock up often.

  The pc don't was not start (sitting at an empty screen) even if it had worked before, so the first thing I did was to remove the two hard drives and their hung outside for my main pc, he said, I wanted to see if they were healthy and if they had the virus on them, etc.

  Health check, past, defragmented both drives them (OMG they were horrible) and on the storage disk ran a virus scan and spyware scan (zero problems) spybot seek and destroy and completely updated avast updated etc.

  On the main C drive, I did Defrag, ran the spybot captured about 10 things mostly of cookies, nothing horrible, then ran avast, it is 17 things in temporary files, remove hit at the end of the scan, re ran the scans and it came out clean.

  Then the two drives are checked as work/healthy, defragmented, virus and spyware cleaning, put it back in the system and I still get the screen white, but maybe 1 out of 10 times I get

  BIOS Rom Checksum Error

  Detection Decivce IDE ATAPI

  Detection Decivce IDE ATAPI

  Detection Decivce IDE ATAPI

  Found the CDrom, boot from it...

  But no matter what I (F-keys, deletion etc.) I can't get the pc to answer or do anything.

  I also removed and then re-inserted the cmos battery thought he could do something to help her back running but no luck, I have a new battery to install to try it but thought to take a few minutes of waiting and re - install could lead to something.

  FTLOSM wrote: my power supply Tester digital antec today, plugged everything in and am get no flow in readings or error beeps, so I guess it's ok (nothing much wise instruction comes with it), but I have the 24-pin and 4-pin connectors in the right places here, that's what they give

  + 5V said 5.1

  + 12V1 said 11.9

  + 3.3V said 3.3

  -said 12v - 12.1

  + 12v2 said 11.8

  5VSB says 5

  PG said 350 ms

  These values of 12 volts out worrying par.2 1 tension or limits?

  The unit announces it will sound in case of errors, I get no flow in the readings or beeps, I just wanted to confirm on this.

  Cuz at this point, I checked the ram, hd, battery changed, makes the integrated reset cmos jumper option, but I don't always get anywhere then I suppose that its cpu or motherboard at this stage.

  Hello FTLOSM, reads that you list are fairly normal. A difference of one or two points on the readings should not be a problem, especially if the power supply is connected and powered. The 12 volt rails are mainly used for engines on the disks, so a small difference in the actual 12 volts would be well within tolerances. If 3.3 volts reading falls below 3 volts, then I'd be concerned.

  I would tend to think that the motherboard is the culprit, since it is rare that a processor will fail under normal circumstances.

  It usually takes a voltage spike to get a processor.

• Pls I need help to reset my bios of my computer compaq mini CQ10. The error code is CNU9513HB4

  Pls I need help to reset my bios of my computer compaq mini CQ10. The error code is[personal information deleted]

  Hello

  Please try (all lower case):

  e9loq3fzpv (3rd tank is a tiny l).

  Kind regards.

• How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3

  How to fix this error "generic host process for win32 services has encountered a problem and needs to close ' help me please I am using windows xp with SP3.

  When I close this error or click on send or do not send, my session network remote also network mapped drive United Nations accessible then I restart my computer and I can access my network grows but after awhile once again this error and the same network behavior that I discussed earlier.
  someone has a better solution that take care of this problem.

  Hello

  Given that the problem is related to the server of the IRIS, IRIS Contact support for assistance:

  http://www.IRISLink.com/C2-1967-189/I-R-I-S---technical-support.aspx

  Hope the above information is helpful.