Help PC after reinstalling goes berserk

Similar Questions

• After reinstalling vista and get the updates, I've "lost" more than 10 GB on my hard drive

  can anyone help? After reinstalling vista and by then setting automatic updates, I find after the download and installation of updates that I "lost" more than 10 GB on my drive hard, why is that?

  Updates must be stored somewhere, and installed somewhere 10 GIG is in the normal range.  Did you do a disk cleanup?

  have you saved or set a restore point?  It has been a decade since I used Vista, but I think that any time you install something made Vista a restore point.

• activation of the xp SP3 after reinstalling on the same laptop computer. pls help

  Original activation key (removed product key) helps to activate the xp SP3 after reinstalling after formatting C:\ due to the virus on the same laptop computer. pls help

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  Please DELTE YOUR KEY - before it gets stolen and subsequently blocked.

• Received error 0xC004F063 after reinstalling Windows 7 on a new hard drive for laptop even. Help

  I have connected my pc today and noticed that my activation stated that my product key is not valid after several months of use!  I always been updated on system updates and activated the pc after reinstalling windows 7 ultimate on a new hard drive.  I receive the error 0xC004F063 of the activation process.  This indicates that the BIOS is missing a required license.  I contacted Microsoft by phone and by the representative of the India was not attentive and no help at all!

  All I want is my key is valid again so that I can continue on with the help of my pc normally.  Help, please!  I have a genuine Windows 7 Ultimate key and it has been installed on a new SSD for the same computer laptop that I use the key.

  Click Start, right click computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link change product key

  Enter the product key located on the COA sticker at the bottom of the laptop and click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Cannot see network on XP Server after reinstalling the operating system

  After reinstalling the operating system on our server, I can't see our server on the network. In the Service list after going to TCP/IP--> INSTALL network, I do not see "Sharing files and printing for Microsoft networks" in the category of SERVICES.
  I see all the other nodes in the network (which consist of several Win7 and Win XP machines).

  Hi BigGtheDood,
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• cant conect to internet after reinstalling windows xp

  system crashed and had to reinstall service pack 3 system operations. all files lost and now I can not even conect to the enternet. tried everything. need help making a wireless connection... Theres not even a frame local-lan or wireless on my computer

  After reinstalling you installed all the drivers for your system? For example for the motherboard (chipset), audio, video, LAN (network adapter) and so on?

  If this isn't the case, you will need to do. Support web site of the manufacturer of the computer to check for the drivers for Windows XP for your model specific computer/specifications. You may need to get some drivers directly on the site of manufacturer support / Unit equipment for material or devices you have installed.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Kind regards

• HP Dm1 3025DX network controller drivers are not installed after reinstalling windows

  Hello

  I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100668-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102448-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90955-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  Judging people, see if they install.

• Restore access to My Documents after reinstalling XP, I get the message: 'access denied '.

  Original title: restore access to My Documents after reinstalling XP

  Recently, I acquired a virus with which Microsoft Security Essentials could not cope.  Then one day the computer refused to start.  I wrongly assumed that my hard drive was dead, so I installed a new HD and reinstalled Windows XP.  [Actually, I first tried the upgrade to Windows 7, because program upgrade windows 7 Microsoft has already said that my computer was compatible... but Windows 7 disk says otherwise!]  Then I tried to install the HD original in an another drive Bay and discovered it still worked, but I could not boot from it.  Apparently, the virus has killed the OS (Windows XP) but my files, programs and documents are still there.  The problem is that when I try to access my old "My Documents" folder, I get the message: 'access denied '.  I believe that this is because the files are stored in a password protected user account.  I know the password, but I do not know how to access the files.

  I tried to create a user account on my new HD (with the operating system Windows XP reinstalled) with the same name and the password that I used on my original (with the Windows operating system XP corrupted) HD to create all the document files.  However, opening a session with this account name and password did NOT restore my access to the My Documents folder on my original hard drive.

  I'm out of ideas.  Help, please!

  Hello

  Try the steps from the article below and check out them.
  "Access denied" error message when you try to open a folder
  http://support.Microsoft.com/kb/810881

  You may be interested to have a look at the article below.
  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/kb/308421

• No sound after reinstaling XP on Dell 5150 Demision

  Original title: no sound

  I have no sound after reinstaling XP on Dell 5150 Demision ideas please help!

  It is likely that you will need to go to Dell.com and download and reinstall the software, patches, and drivers designed for your computer model and the OS.

• How can you recover files, folders, software and drivers after reinstalling windows xp family?

  original title: How can you recover files, folders, software and drivers after reinstalling windows xp family? Please help, I've lost everything!

  When the update Norton Internet Security 2009 to 2011 on reboot, windows cannot open.

  Root\systems32\hal.dll Windows prevented windows from opening.  My machine in a Dell dimension 8300.

  On a Dell website, I found a method of recovery if you can reinstall windows xp from cd.  I was able to do it, but lost all my files.  How can I recover all my fortune, images, software, drivers, etc.?  There must be a way to extract this information from the hard drive.  Any help is the material and can save my marriage!  Thank you.

  Hi MarkS_02127,

  Since you've reinstalled windows, you will need to re - install applications once again, you will be lucky (if you format the drive) data on your computer. You remember that location, it was in my documents? If yes it just open C:\Documents and settings and locate your old username, you will find your old desktop, Favorites and Documents.

  I hope this helps.

• Cannot connect to Internet after reinstalling vista.

  * - Original title - OUR Dell laptop came with the vista operating system

  OUR Dell laptop came with the vista operating system. Myhusband dislike vista.  Exp of Windows has been installed on our laptop.  recently, virus disabled the jury mouse & key.  I reinstalled vista. How can I connect to the internet.  I get an error msg.  the underlying ethernet connectivity required for the broadband connection was not found. pls install activate the ethernet adapter.

  Fran

  Hi Joseph,.

  I see that you can not connect to the Internet after reinstalling vista. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2 have you installed all necessary drivers after installing vista?

  3. do you format the disk hard while re - install vista?

  4. who is the ISP?

  I suggest you to refer to this article and check if that helps.

  Wired and wireless network problems: http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-vista&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Cannot install printers after reinstalling Windows Vista

  Thanks Ajay, your info has reinstalled me, there is one thing that's happened maybe you can help me aggain. After reinstal I find that I can not install, or any of my printers with the printer installation discordant from their web sites. I looked around drives c: and cannot find something that refers to printers or drivers can you help, mrk.

  Hi Rudy,.

  (1) what happens when you try to install the printers?

  (2) that you get the error messages?

  Step 1: Run the fixit available in the link below and check if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/GP/printing_problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• ProBook 4530 s sound does not work after reinstalling sound driver

  Hello

  Lately I noticed this weird sound while I was playing music or other sounds from my computer. It is difficult to explain what it sounds like but it was as if the distorted sound for one second every now and then, a little sound like a robot. I looked if I could solve this problem and found that reinstalling the audio driver should solve the problem. That's what I did, but after reinstalling and restarted my laptop it says "Nou Audio output device is installed" I made clear on the site of hp. For the moment, I have no sound. I tried to install an earlier version of the audio driver, but that no longer works. I'm sure that I have installed the correct drivers (I tried sp59291 and the sp57776 of earlier version).

  I don't know what version I have installed first.

  Additional information:

  -To install a new audio driver, I went to the Device Manager and uninstalled the current sound driver.

  -Manager At of devices under the IDT High Definition Audio CODEC there is a line called "Intel(r) Audio display.

  -In the Device Manager there is a yellow triangle with an exclamation to IDT High Definition Audio CODEC

  -J' have Windows 7 Home Premium 64 - bit installed, service pack 1

  I hope you can help me!

  Myxx

  Guess I have solved the problem, I uninstalled the audio driver, close my laptop computer and rebooted. It starts automatically install the correct driver. I hear that weird no sounds either!