Help, please! my Eee netbook will not start!

Similar Questions

• FOR SOME REASON, MY WIFE LOST BOOTMGR AND HIS NETBOOK WILL NOT START I TRIED TO OBTAIN DE FACTO

  FOR SOME REASON, MY WIFE LOST HER NETBOOK HP BOOTMGR AND IT WILL NOT START I HAVE TRIED TO GET THE FACTORY SETTINGS, BUT IT WILL NOT DO THAT CAN HELP YOU

  
  

• NetBook will not start

  Hi, so I got a virus on my netbook a few days ago. I was going to get rid of it, but I'm lazy and waited and tried to start it until today. I got a blue screen, and I think that the error was bad_system_config_info. It is difficult to say because it disappears so quickly and restarts. I guess that the virus has damaged an important file, but I don't have an external DVD drive, or a Windows xp disc.

  I tried for hours to fix my flash player. None of the guides I did worked. I don't know what to do. Can anyone help?

  Also, I have windows xp.

  Hey Buddy,

  What netbook you have exactly?

• Need help. Suddenly, several programs will not start. Do not know why.

  All of a sudden I can't get most of the products Microsoft start, as well as other programs.

  They worked fine 2 days ago.  Don't know what has changed.

  When my machine starts up I have 2 teething problems: JavaW.exe and HPWAMain.mod, both close due to, I think that his warnings of executing called data,

  I ran Norton repeatedly, comprehensive analyses and latest updates of signature that show nothing wrong.

  Don't know where else to find all the log files.

  Need some advice.

  I am running the following:

  HP Pavilion DV9700 entertainment notebook

  Windows Vista Ultimate 32B

  I have to stop now on this thread that I work with a person of Quads on these issues.

• Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

  After the updates of this week, the system will not load anything.

  Hi Juliet,

  Thanks for asking the question in the Microsoft Community forum.

  From your description, I understand that after Windows Update, you can not load Windows.

  To better understand the question, please answer the following questions:

  1. What is the version of the Windows operating system that is installed on your computer?

  Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  2. what happens when you try to load the system? You receive an error message?

  3. what application or anti-virus security suite is installed on your computer?

  4. you remember after installation of update, you are facing this problem?

  Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

  If you are using Windows 7 and Windows Vista, follow the mentioned methods:

  Method 1:

   

  If the computer does not start in safe mode, perform the last known good Configuration.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Note: Link above also applies to Windows Vista.

  Question remains always use same method 2.

   

  Method 2:

   

  Try to perform the Startup Repair and check.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  If you are using Windows XP, follow the mentioned methods:

  Method 1:

  Perform the last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2:

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.

• Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

  ASUS PC, Windows Vist Home premium, all updates.

  Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

  Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

  Repair action: repair and checking of the filesystem Integrety

  Result: failed. Error code = 0 x 2

  Time required: 6206818ms

  I get no blue screen, I can't even any screen!

  I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

  I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

  Thanks for any help!

  The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

  In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

  If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

  My creative cloud will not start. I just get the spinning circle of progress. My fonts are synchronized on the CC and I can't access it, too. Help, please!

  Hi Joshua,.

  I think you found the turning wheel on the Adobe CC application.

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

  You can also view the nets below where this issue has been addressed:

  Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

  Creative Cloud Desktop App taped blue spinning wheel after update.

  Kind regards

  Sheena

• Pane Windows will not start! Help please!

  I have no idea what exactly happened, but my sidebar will not start. I try to click on it through programs and all he will say is that this windows sidebar has stopped working. a problem caused the blocking of the work programme. Windows will close the program and notify you if a solution is available. I get the same message every time I try to click on run as administrator. I tried so many things, but nothing seems to work. Is it possible that I could reinstall or something? It has been so frustrating. Help!

  Hello

  If you have tried all THE above so it looks like you have a corrupted profile.

  Try these to erase corruption and missing/damaged file system repair or replacement.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then do-, use the hidden administrator account for the lowering your user account (the lowest level)
  APPLY/OK, then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. To do this
  a couple of times. Do the same for other accounts that may be difficult. Then, if necessary, you
  can also reset your password in the accounts. Do not forget to leave your account administrator
  and others to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary.
  (just to fix it with, do not use regular account, a safety valve) Always keep a spare part
  ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you can't access your old account that you need then you can always use an Admin to migrate
  towards a new (remember to always leave an Admin account that is not used except for a test
  and fix).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Hope this helps

  Rob - bicycle - Mark Twain said it is good.

• Help... MSSE, and Security Center will not start... ?

  Security services will not start at all, just stay off... Is this a virus... ?

  1. research of virus with MBAM and McAfee...

  2 restart disabled services, but 5 seconds later they turn off automatically...
  3. update system...
  4 checked registry...
  5. now receive error message - "code 1058 '...
  S ' PLEASE HELP... Thank you...

  Hi SirSmythikus,

  Check to see if this article helps you.

  Service starts not and displays "Error 1058"

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• Windows Help and Support will not start.

  My brother is running windows Vista, and the application help and Support Windows will not start.  The exact wording is:

  "Help and Support could not start.  For more information, contact your system administrator or visit http://windowshelp.microsoft.com"

  Clicked on the link but no help at all.  A system restore would work, and if yes, what are the other effects there - he will have to reinstall all windows updates, service packs, etc.. ?

  I could restore just the request of assistance?  If so, what files can I restore and where are they located?

  I stick with XP.  Vista makes no sense to me and I can't find anything!

  Hello lynndisplayname,

  Thanks for posting on the Microsoft answers Forum.

  Click on the article number KB and review of the article.

  KB Article ID: 917607 -I can not open Help files that require the Windows Help program (WinHlp32.exe)
  There is a download in the article for 'Download WinHlp32.exe for Windows Vista'. Download the WinHlp32.exe file and see if it
  help to solve your problem.
  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• L50-A-19N satellite will not start in the BIOS

  Hello

  I have a problem with my laptop.
  I have installed 8.1 and fedora 20 windows.

  I was in fedora, when I decided to restart Windows.
  Instead of grub, I saw message with the error and my notebook has stopped booting.

  I pressed the power button / stop, he died but when Im trying to start it again, I see the logo of Toshiba Leading Innovation and that's it.

  It will not start any further.
  I decided to get my system, but when I press F2 or F12, nothing happens.
  I can't get into the BIOS!

  Please, help me to solve it.

  Somehow, this seems really strange
  I m wondering why you are unable to access the BIOS

  What you can try to do is, remove the laptop HARD drive and switch on and press F2.
  From my point of view of the rare even if the isn't HARD drive connected, you should be able to access the BIOS.

  But for Pierre, I'm not very well your laptop problem is related to the faulty / corrupt Boot partition m

  However, your comments would be greatly appreciated

• Nine NB100 will not start

  Hello

  I just bought a Netbook NB100.
  After unpacking, I tried to turn it on, but it will not start

  When I put the charger in it gives a rattling sound very rapid for a few seconds and then stops, and also the sign of the battery flashes for 5 seconds and then turns off.
  When I press the button start nothing happens.

  Any help appreciated. So was lookiing forward to this

  Thank you

  Hello

  Remove the battery, connect the AC adapter and try to turn it ON.
  I didn't understand exactly what happened. But I hope you didn t turn it on for the first time without adapter.
  It is logical that the laptop must be put in power supply and after short time you can run it for the first time.

• Equium L10 will not start

  Please help - my Equium L10 will not start.

  Power supply is OK. When the power is connected the orange battery light comes on. I press the power button the green power light turns on momentarily (literally a Flash), then both the Green and orange lights out with orange alone returning it on about 2 seconds later.

  Else does nothing - no fan activity, no hard disk, no activity of the screen activity, no other light - you get the picture!

  I tried the following:
  Removed battery and tried to start with AC power not only - no joy
  Removed AC power and I tried booting with battery only - no joy
  Barrette of RAM removed and reinstall - no joy

  Does anyone have ideas before considering a tech? Suggestions (with the exception where to paste!) would be welcome.

  Kind regards

  Gary C

  Hmm .He doesn't sound good. For me, it looks like a motherboard problem. It is maybe something wrong with electronic power to the Board of Directors of s. But not for sure.

  What you can do is to remove the battery and unplug the power adapter for a while.
  Wait about 20 minutes and connect the battery and adapter for the laptop. Then try turning on the laptop computer.
  If this does not help I recommend contact the ASP technician, because I don t think you will be able to know what's exactly wrong.

  So I hope that the technician can find the fault quickly and can solve this problem.

  Good luck

• Re: Satellite U300 will not start

  The machine has failed at a conference while using only the word and not on any network.

  Now the machine will not start orrepair and even the recovery disk will not work. He gets to the part where he asked for the language and then freezes on the next screen. I ran a disc hard diagnosis progam which reports no errors but I don't know enough about such things.

  The drive light flashed hard and I can hear the work of the reader, but nothing happens.

  Help, please

  Hello!

  It's strange, but in your case I would try to format the HARD drive before using the recovery disk.
  There, you can use the Microsoft Windows XP disk or another tool that allows you to format the HARD drive.

  If you have formatted the drive HARD try again with the Toshiba recovery disc.

  Good bye