HELP put this module memory desktop md4096sd3-1333 optima pny - 4 GB pc3-10666, ddr3 1333mhzin?

Similar Questions

• This module memory KVR or ATC for Satellite L20-199?

  Hello

  I am looking for 1 GB RAM upgrade. I have a Satellite L20-199 with original 256 MB RAM Samsung(DDR2 533Mhz PC2 200 pin SODIMM)

  I found the KTT533D2 / 1 G seems to be 'special' for this machine

  http://www.EC.Kingston.com/Ecom/configurator_new/partsinfo.asp?root=us&LinkBack=http :// www.kingston.com&ktcpartno=KTT533D2/1G

  There are the cheaper standard memory of KVR533D2S4 / 1 G (almost half price).

  http://www.EC.Kingston.com/Ecom/configurator_new/PartsInfo.asp?root=us&LinkBack=http :// www.kingston.com&ktcpartno=KVR533D2S4/1G

  Can I use the cheapest? Any other suggestions?

  It is very important to buy compatible module. I recommend buying the first. One also listed Toshiba part number and 100%, you can ensure that the module is working properly.

  By the way: you can buy cheaper and test at home. If there is a problem you can return anytime.

• This module memory for Satellite L10 202

  Hello
  I have computer laptop toshiba satellite L10 202.
  I have 256 MB of ram installed. I would like to add an another 512 MB of ram. Could you tell me which modules of memory can I use with this model?
  Also, I would like to know which manufacturer do you recommend?
  Thanks in advance
  Bartosz Bielecki

  You can visit the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ONLINE_SHOP

  or your order that modules are the Toshiba ASP in your country.

• This module memory to buy?

  I have a Mac Pro (early 2009), frequency of 2.66 GHz Quad Core Intel Xeon.  Currently I have 3 GB of memory (three 1 GB modules) and there are increasing.  Can I buy a 4GB module (if I can't find those 2 GB online), and my question is: is a 4GB module in my Mac, sharing space with the three modules of 1 GB, works fine?  Thank you.

  You can look at some of the sites such as OWC or critical

  http://eShop.MacSales.com/MyOWC/

  https://www.crucial.com

  Find your model and see their recommendations

• Question on the module memory for Satellite A60

  I have a Satellite A60-352, and I was wondering if I can put my module memory of my laptop on my desk. And another thing, where I find the module in my cell phone because I'm not.

  Thank you

  Hello

  The fact is that the A60 was equipped with an internal memory (256 MB or 512 MB).
  This memory is not removable and so you only have one memory for an upgrade slot.
  Usually the A60 manages the PC2100 200 pin SODIMM (266 MHz) DDR modules.
  So, you can use the modules from different manufacturers that support the above specifications.

  Good bye

• Help. I am a neophyte of the technology. I bought Adobe PDF Export, annual. How can I download this to my desktop?

  Help. I am a neophyte of the technology. I bought Adobe PDF Export, annual. How can I download this to my desktop?

  you do not have.  FAQ | Export to Adobe PDF, Document Cloud

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• I just installed 5 Lightroom, but cannot import photos, there is no option to import anywhere. Get the pop up saying error trying to change modules? Help with this?

  I just installed 5 Lightroom, but cannot import photos, there is no option to import anywhere. Download pop up saying error trying to change modules.

  I had this with the trial, then I bought the license and still happens.  Help with this?

  Error changing modules | Lightroom

• Cannot find this module. Help, please!

  I want to edit this module, but can't find it on the model of Module, licensed content anywhere...

  module_productfeaturelist, featured, 100, default, true

  Help, please. Thank you!!

  Hello

  This module is detailed here: http://kb.worldsecuresystems.com/134/bc_1345.html - module_producfeaturelist research

  Specifically, the last parameter determines what provision he used. If it is set to true, the product small backup page layout is used - and you can find under Templates Module - > online store layouts. Or if you use FTP under Layouts-> online store.

  Thank you

  Florin Carlig

• Equium L100 186: how to remove & update modules memory

  I bought 2 x 1 GB memory modules for my satellite L100-186 and on removal of the cover to find that it
  difficult to access and delete existing ones. I'd be able to try this or do
  professionally?<>

  Hello

  Usually, the update of modules memory is not very difficult but a little trickier.
  A common user should be able to upgrade memory but please don t use force but be always gently and attention!

  In the manual, you should find a description detailed of how to remove and how to insert the modules.
  Check it ;)

  But note; If you have no experience and don't know how to do this contact a technician for help. In this case, you are always on the right side

  Good bye

• TECRA 8200 does not recognize the second module memory

  Hi, I have a problem with one of the TECRA 8200. The machine only recognizes the first module and not the second 128 M I tried form to upgrade memory up to 256 M. module is compatible because it works without problem with an other TECRA 8200!

  I updated the bios to version 1.6 but there is no way: the PC does not recognize the second module!

  What can I do?

  Hello

  Perhaps is the second memory slot is faulty. Put this add-on in the first slot and check again.

• Failed hard drive on HP laptop. After replacement, can I put OS and memory?

  I have a HP Pavilion Entertainment Notebook PC, model dv9617nr (HP pn GS730UA).  An error message at startup says "Operating system not found" so my Windows Vista Ultimate 32-bit (updated two years ago) does not load. I guess that means that my hard drive has failed. How can I test this hypothesis? Yet once, guess I am not mistaken, and I ordered the recommended replacement (pn 590736-001 HP) of spare parts warehouse ($142.50 plus port charges). Are there instructions on internet to make this replacement? After I do this replacement, I thought I could install Windows 7 I have and upgrade to 4 GB SODIMM the 1 GB SODIMM memory that originally served as. What problems I have with hardware compatibility with Windows 7? If the memory module that I use has the same features as the HP recommended replacement (pn 598861-001 HP), i.e. 800 MHz, 200 pins, PC2-6400, SDRAM, but greater capacity memory of 4 GB, I have compatibility problems to use it? Please advise me on these issues. Thanks, Jeff

  Hi, Jeff:

  Let me knock your question...

  First, to confirm that your HARD drive is dead, go into your BIOS menu. There should be a diagnostic utility hard disk and memory.  Run the HARD drive Diagnostics utility and see what it reports. More that likely that the disk HARD fell down, and is more usable.

  You can order a replacement disk or you can get just about any hard drive SATA II - 5400 RPM or 7200 RPM.

  You could go to 250 to 500 GB, if you choose. Unfortunately at the present time, HARD drive prices are unreasonably high due to the flooding in Thailand, where many HARD drive manufacturing plants. Some have been damaged heavily, causing HARD drive prices triple almost from one day to the next.

  This is a disc, you can get that I think is better than what you have now: this one is 7 200 RPM. Faster but uses more energy.

  http://www.Newegg.com/product/product.aspx?item=N82E16822136279

  You can get the version of 5400 RPM... too similar. Not as good as the caviar black. It's more along the line of what you would get at HP.

  http://www.Newegg.com/product/product.aspx?item=N82E16822136387

  Read the comments at the same time, or you are free to get HP.

  There are instructions for installing the hard drive and memory on your laptop support and driver page. Click on the manuals on the right side of the page.

  http://support.HP.com/us-en/document/c01278446

  So, you want to watch the maintenance and care guide.

  You can upgrade the memory to a maximum of 4 GB by using 2 x 2 GB memory PC2-6400. You can get it at HP, or you can get it on the link below. It is the memory that I use. In fact I just ordered this same memory to install my sister-in-law in dv6700.

  http://www.Newegg.com/product/product.aspx?item=N82E16820148159

  Now you can install W7 very well. I installed W7 Home Premium 64 bit on my dv6810us which has pretty much the same material as your and 4 GB of memory (the same that I posted above).

  However, here's the catch. It depends on what version of W7 you have. If you have a W7 upgrade version, you must install a qualifying operating system on the hard disk before you can improve.

  If you have a full version of Windows 7, then you can install it on a blank hard drive.

  If you have the version upgrade, contact the HP support and ordering a set of recovery disks Vista. Install Vista, then uprade to W7 if you have the updated release of W7.

  You can use the vista drivers support page of your laptop for all the drivers you need that W7 has no power.

  One thing... NOT (updated flash) BIOS while running Windows 7. You can Flash only using windows vista.

  I hope this helps. If you have any other questions, please let us know.

  Paul

• MD3000 Raid Controller Module memory parity error

  MD3000 has two controllers. One of the controller does not have. SO I replaced it with a used controller, without work. All errors are gone, except a "RAID Controller Module memory consistency error".

  Recovery Guru recommends steps that I followed without success.

  Need help in this forum.

  Paul

  Hello Paul,

  What you need to do is on the replacement controller to pull the raid battery and wait about 2 minutes then reinsert it again. Also I want to try to do is to Flash the firmware on the system as well.

  Please let us know if you have any other questions.

• Help on graphics card memory and upgrade for iMac

  Hello!

  I need advice on a good new graphics card for iMac 27 inch end 2012. My work is mainly in animation, Visual effects and game development soon, so I need an additional card to increase my speed.

  Currently, I have a NVIDIA GeForce GTX 680MX 2048 MB card. Do you think I should stick to a similar card? Is there something new that will offer me better performance at an affordable cost?

  I don't have much money to spend, but I can certainly use additional graphics now.

  I have also 2 remaining memory locations that accepts DDR3 1600 MHz memory module, but it seems that this module is no longer available. If I had to choose between a graphics card and RAM, which should I go with?

  Finally, can I install these myself? I don't have any Apple Store around me and I do not trust the computer guys in my area.

  First of all, the iMacs are notoriously difficult to make something with except add RAM. Here is a good site where you can get some info on the dismantling, etc.:

  https://www.iFixit.com/

  Usually, graphics cards should be replaced with the same model/type of work (if any) - see above site for this kind of info. I'm quite sure that you cannot add just one - iMac is not designed for it.

  Regarding the RAM, just check out OWC for necessary RAM:

  https://eShop.MacSales.com/shop/memory/iMac/2012_27/DDR3L

  Check that your model is listed. I don't know where you would have been told that the RAM is no longer available (FWIW, Apple does not sell RAM and uses of third party RAM in the new Macs).

  I'd go with the RAM - how many do you have now? Adding RAM is easy.

• This module has been disabled by an administrator

  Greetings,
  I'm trying to add on KeyScrambler Personal to my Firefox.
  Go to: https://addons.mozilla.org/en-US/firefox/addon/3383.
  When I try to add KeyScrambler Personal to Mozilla Firefox I get the message:
  This module has been disabled by an administrator.
  I was hoping you might be able to help me solve this problem.
  Thank you
  Russ Smith

  Hello

  This message means that a site administrator has disabled this add-on because it violated their rules. We cannot help you fix because it is removed from the site.