Help request for C:\windows\system32\config\system / Bad Pool Caller / on xp

Similar Questions

• \windows\system32\config\system... Missing or corrupt - need help!

  It shows "\windows\system32\config\system...missing or damaged" when I start the laptop. "

  He said that to use the windows recovery console, but my laptop is 10 ", so it does not come with a CD-ROM.

  then I tried to use windows PE (preinstallation environment) system startup via USB driver enter to solve the problem, but when it's loading system, after a few seconds it stop loading. so, I can not in windows PE.    don't know why, that might happen.

  someone knows how to fix this?

  Please help me with this.

  I would never start with KB307545 for this problem, have never used KB307545 to resolve this issue and will never suggest KB307545 to solve this problem.  It's really bad advice.

  KB307545 is the first thing to come into the Bing search engine for the error, but that doesn't make it the right thing to do.

  The problem likely is the file system is corrupt and XP just can not find the file to load.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)

  These can cause corruption in the file system that must be fixed before you do anything
  on the other.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive that has a corrupted file system, so this must be first using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  You don't need a Windows XP disk to run chkdsk/r either (or implement KB307545), but you have to start on something.

  Do you your system of unspecified and model do not have a CD/DVD drive, or you do not have a Windows installation CD or both?

  You have a working CD/DVD drive or not?

  Your system is able to boot from a USB device?

  If your mini system has no CD-ROM drive (many minis don't) and even if you had a Windows CD, it would be of no use, you reference to KB307545 is therefore still less logical.

  @Imran: technician of technical support:

  Have you ever actually fixed this problem before?

  You have ideas that are possible?

  Why don't you take your system to work, get the XP running and then pull the plug on this subject.  Repeat this about 5 - 10 times and then you will be recreated the problem and you can actually see.

  Then, don't use is not a Windows XP installation CD, fix the system afflicted and then offer this solution as an answer instead of the first Microsoft KB article that appears in a search engine Bing.

• HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

  HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

  You need an external DVD drive to get the repair will.

  Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

  The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

  A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

  See this page from HP

• How to get windows xp re - install for installing the flash drive to the computer error portable "windows\system32\config\system".

  My Acer Aspire One has error "windows\system32\config\system" How can I get a copy of windows xp original usb? When I bought the

  computer laptop windows xp made & paid for. Product key is on the back. Can I download & reinstall using a flash drive?

  C:\Windows\system32\config\system is one of the files that make up the system registry.  Backups of the system registry files are kept in the 'C:\System Volume Information' folder under the system restore program.  Probably all you need to do is copy of registry backups in the Windows\system32\config folder.  A reinstall of windows may not be necessary.

  To do this is to start your machine from a free "Live Linux" thumb drive.  You can create a startup disk Ubuntu here:
     <>http://www.Ubuntu.com/download/Ubuntu/download >

  Follow the instructions of "Try me" and you should be able to copy backups of registry in place.  Windows has "Hidden doubling" the System Volume Information folder, but Linux doesn't seem to have any problems with it.  After starting from the Thumb Drive Linux, follow the instructions in the following article from part 2, step 6, using the graphical interface of Linux to copy files (right click copy, make a right click Paste) instead of the lines of command in the article.  With a little patience, you can restore the registry from a backup, and be back in operation

  "How do I recover from a corrupted registry that prevents Windows XP startup"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Windows XP SP3, corrupted registry. Corrupt / missing windows system32\config\system - restore via Recovery Console cannot copy files of origin of the system32 folder. Please help.

  When my husband's computer was incorrectly stop we met the ' Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "error message. I understand that the registry is written on the judgment and that it is not rare that the registry damaged during the power failure or abnormal stop. Checking the bandages for details on how to proceed, and begin the process of recovery appearing in theArticle ID: 307545 of http://support.microsoft.com/kb/307545/en-us below:

  «First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the folder System32\Config.» When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     Copy c:\windows\system32\config\default c:\windows\tmp\default.bak.

  There was no administrator password prompt, but the console began without incident. I was unable to copy these files to a folder. (Yes, I checked my spelling and made certain that the commands, parameters and syntax are accurate.) I created another directory and tested the console by copying the files to repair to the secondary directory. These copied without any errors. I was able to discern that there are no problems with the console itself.  At this point, I'm not sure how to proceed.  There is data that has not yet been backed up and must be recovered where it is suggested to do a new/factory install. Therefore, I need to know if there is another way to proceed to the recovery or if I do a fresh install. In addition, any suggestions on its disk data recovery, if the new installation is the only way to move forward, also would be appreciated. Thank you.

  Just to be clear, when you have tried, for example, to run this command:

  copy c:\windows\system32\config\system c:\windows\tmp\system.bak

  You have an error message (please report it to full) or maybe nothing happened.

  But you did another directory (say 'c:\windows\otherdir') managed by running the following command:

  Copy c:\windows\repair\system c:\windows\otherdir\system

  If this is the situation in which you are in, you are essentially impossible to create a backup copy of the current registry damaged.  This is not the end of the world, because as you can see by reading the full article, you never use these files master anyway.  This step is just included "on the side of caution" so that you can restore the original registry files, corrupted, if for some reason you wanted to.

  Because you cannot start the system anyway, you might as well begin the process described in the article without creating these master files.

  You can either make the step remove first:

  delete c:\windows\system32\config\system

  or just try to copy the files in the directory of repair on the files in the \system32\config directory and answer 'Yes' when asked if you want to replace the existing file.

  Note that the success of this procedure assumes that you run the system restore.  Otherwise, you'll find yourself with the registry as there was when Windows installation - which certainly won't be compatible with the State of your machine today.

  Essentially, what you are doing are the following:

  1. While in the Recovery Console, restore the registry to its state when you first installed Windows.  This allows you to start Windows - but do not try to use any application program.

  2. in Windows, copy of the registry that is saved in a recent restore Point to a location that are accessible by the Recovery Console - but not by using the restore application from the system itself, because with the 'original' registry, System Restore is not aware of these restore points.

  3. While in the Recovery Console, restore the registry using the files you made available at step 2.

  I don't really know what's the point of the stage of section 4, unless it is to use system restore to restore to a different restore point.

  If you can't make things work by following the steps above, or if there is no recent restore points to use in step 2, then you are correct: you must backup your data, do a clean reinstall of Windows, then reinstall your applications with original media and restore your data from backup.

  If you are able to do step 1 and start Windows with its original register, you should be able to use the native Windows tools to backup your data.  I would not use NTBackup, but rather just copy (do not use the 'move' command) data on an external hard drive.  Alternately, you could boot from a live CD of Linux (for example, Knoppix) to access your drive and copy the data.  Or if you have a bootable CD from a like Acronis Disk Imaging application, you can use it.  If you would like more information in this sense, after return.

• Windows\System32\Config\System is missing or damage on Satellite 5200

  Hello

  After a system crash I have on my 5200 always the next message after startup:

  Windows could not start because the following file is missing or corrupt:
  -WINDOWS-System32-CONFIG-SYSTEM
  You can try to repair this file...

  As I wrote in various support forums, it seems that the Windows XP registry is corrupted. There is an adviser to Microsoft to fix this, but that's why I have to boot from the CD.

  I tried to change the sequence of booting (from HDD to CD) access the BIOS at startup but all the possible key (and combination) did not work, I found: F12 (which should be the right one for the 5200 series), F1, F2, DEL, C,...
  If I hold down ESC at startup I get a minimal installation but only to change the time and date.

  Are there any experience available regarding this issue? Toshiba support responded to my support request.

  Thanks in advance!

  I don't know if this will help but check this thread m:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=58&ThreadId=24051

  There is a similar case and finally the user discovered that the HARD drive has been locked.
  Very strange, but anyway. Check it out

• Startup error - file is missing or corrupt: windows\system32\config\system

  When I turn on my computer, I get the following error message:

  Windows could not start because the following gile is missing or damaged:
  Windows\System32\Config\System
  You can try to repair this file by starting Windows Setup using the original Setup CD.
  Select the rat the first screen to start repair.

  I can't solve this problem because I do not understand what to do.
  First of all, I put in the recovery CD Toshiba to installation and then I turned on the computer.
  When the Toshiba screen came on I pressed r
  Nothing happened and I was returned to the original error message

  Secondly, I tried holding down c when I turned on the computer because that's what cd said to
  The CD loaded and brought me to a screen that asked me if I had backed up all my files
  I've supported them all upward, only some, because previously there was no problem with the computer and I don't think I have it will re-start.
  I hit not and so I do not know what to do next.

  I can lose everything on my computer, otherwise I'd just re - load windows. What should I do?

  Is anyway for me to back up my documents and then reload everything, or is there a way for me to fix the entire system without erasing it?

  Thanks for your help
  Josh

  I agree with kody. You can try to fix it using windows advanced option menu. Maybe you can also try to repair Windows by using the recovery console. Problem is that this option can be used with Microsoft WXP CD facilities and not with supplied recovery media.

  http://helpdesk.its.uiowa.edu/Windows/instructions/repairinstall.htm

• file missing or corrupt windows\system32\config\system

  HELP - by on the title I did: -.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     copy c:\windows\system32\config\default c:\windows\tmp\default.bak

     delete c:\windows\system32\config\system
     delete c:\windows\system32\config\software
     Delete c:\windows\system32\config\sam
     delete c:\windows\system32\config\security
     Delete c:\windows\system32\config\default

     Copy c:\windows\repair\system c:\windows\system32\config\system
     copy c:\windows\repair\software c:\windows\system32\config\software
     copy c:\windows\repair\sam c:\windows\system32\config\sam
     Copy c:\windows\repair\security c:\windows\system32\config\security
     Copy c:\windows\repair\default c:\windows\system32\config\default

  6. Type exit to quit the Recovery Console. Your computer will restart.

  Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

  If you have access to another computer, to save time, you can copy the text in step 5, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console:

  batch regcopy1.txt

  With the command batch to the Recovery Console, you can process all the commands in a text file in the order. When you use thebatch command, you do not have to manually type as many commands.

  Second part

  To perform the procedure described in this section, you must be logged in as administrator or an administrative user (a user who has an account in the Administrators group). If you use Windows XP Home Edition, you can connect as an administrative user. If you sign in as an administrator, you must first start Windows XP Home Edition in safe mode. To start the computer in Windows XP Home Edition in safe mode, follow these steps.

  Note Print these instructions before continuing. You cannot view these instructions after you restart the computer in Mode safe. If you use the NTFS file system, also print the instructions from article KB309531 of the Knowledge Base. Step 7 contains a reference to the article.

  1. Click Start , click shut down (or click turn off computer ), click restart , and then click OK (or click restart ).
  2. Press the F8 key.

     On a computer that is configured to start to multiple operating systems, you can press F8 when you see the boot menu.

  3. Use the arrow keys to select the appropriate safe mode option and press ENTER.
  4. If you have a dual-boot or multiboot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

  In part two, you copy the registry of their location saved files by using the system restore. This folder is not available in the Recovery Console, and is usually not visible on the typical use. Before you begin this procedure, you must change several settings to make the folder visible:

  1. Start Windows Explorer.
  2. On the Tools menu, click folder options .
  3. Click the view tab.
  4. Under hidden files and folders , select Show hidden folders and files , and then click to clear theHide protected (recommended) operating system files check box.
  5. When appears in the dialog box confirming that you want to display these files, click Yes .
  6. Double-click the drive where you installed Windows XP to display the list of folders. If it is important to click on the correct drive.
  7. Open the System Volume Information folder. This folder is not available and is dimmed because it is defined as a file hidden doubling.

     Note This folder contains one or more _restore {GUID} folders such as "_restore {87BD3667-3246-476B-923F-F86E30B3E7F8}.

     Note You may receive the following error message:

     C:\System Volume Information is not accessible. Access is denied.

     If you receive this message, see the following article in the Microsoft Knowledge Base for access to this folder and continue with the procedure:

     309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder
  8. Open a folder that was created not at the present time. You may need to clickDetails on the view menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. Here are the restore points.
  9. Open one of these folders to find a subfolder of the snapshot. The following path is an example of a folder path to the snapshot folder:
     C:\System Volume \RP1\Snapshot Information\_restore {D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}
  10. Starting from the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:
      • _REGISTRY_USER_. DEFAULT
      • _REGISTRY_MACHINE_SECURITY
      • _REGISTRY_MACHINE_SOFTWARE
      • _REGISTRY_MACHINE_SYSTEM
      • _REGISTRY_MACHINE_SAM
  11. Rename the files in the C:\Windows\Tmp folder as follows:
      • Rename _REGISTRY_USER_. DEFAULT DEFAULT
      • Rename _REGISTRY_MACHINE_SECURITY to SECURITY
      • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE
      • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM
      • Rename _REGISTRY_MACHINE_SAM to SAM

  These files are the system restore registry files. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during the first part. Therefore, it is important not to use the most recent folder, especially if the time stamp on the folder is the same at the moment.

  The current configuration of the system is not aware of the previous restore points. You must have a previous copy of the registry to a previous restore point to make previous restore available again points.

  The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to ensure the files are available in the Recovery Console. You use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, the Recovery Console has limited access to records and cannot copy the files in the File System Volume.

  Note The procedure described in this section assume you are using your computer with the FAT32 file system. For more information on how to access the folder of information system with the NTFS file system Volume, click on the number below to view the article in the Microsoft Knowledge Base:

  309531 (http://support.microsoft.com/kb/309531/) how to access the System Volume Information folder

  Third part

  In part three, you delete the existing registry files, and then copy the system restore registry files to the C:\Windows\System32\Config folder:

  1. Start the Recovery Console.
  2. At the command prompt, type the following lines, pressing ENTER after you type each line:
     del c:\windows\system32\config\sam

     del c:\windows\system32\config\security

     del c:\windows\system32\config\software

     del c:\windows\system32\config\default

     del c:\windows\system32\config\system

     copy c:\windows\tmp\software c:\windows\system32\config\software

     copy c:\windows\tmp\system c:\windows\system32\config\system

  copy c:\windows\tmp\sam c:\windows\system32\config\sam

  Copy c:\windows\tmp\security c:\windows\system32\config\security

  Copy c:\windows\tmp\default c:\windows\system32\config\default

  Note Some of these command lines may be wrapped for readability.

• Type exit to quit the Recovery Console. Restart the computer.

Note This procedure assumes that Windows XP is installed in the C:\Windows folder. Make sure that replace C:\Windows with the appropriate dossier_Windows if it is a different place.

If you have access to another computer, to save time, you can copy the text in step 2, and then create a text file named "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console:

regcopy2.txt batch

Fourth part

1. Click Start and then click all programs .
2. Click on Accessories , then System Tools .
3. Click System Restore , and then click restore to a previous RestorePoint .

and now when I go to the fourth part and try to connect, it says I need to activate windows to open a session. If I click on Yes, the computer crashes just in my background image, if I click on no, this Chuck me back to the log in page... What is wrong with this blooming thing

Please HELP - it took three days of messing around and actually the Ive got nowhere!

OOOOO... should start here:
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)
These can cause corruption in the file system that must be fixed before you do anything else.
If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
There is zero logic to start try to copy files to a hard drive that has a corrupted file system, so this must be first using the XP chkdsk program and run chkdsk can solve your problem completely.
Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.
Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable XP Recovery CD of Console.
This is not the same as recovery disks that may have come to a store to purchase the system.  If you don't know what kind of bootable CD, you, do a CD of bootable XP Recovery Console and do not forget.
After booting into the Recovery Console, you should be in this folder:
C:\WINDOWS
For each of your hard disk partitions, you must then run:
Chkdsk /r
For example, at the Recovery Console prompt, enter:
CHKDSK c: /r
Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.
The chkdsk/r must be completed without error, you may need to run several times until it does.
Remove the CD and then type "exit" to exit the RC and restart the computer and the report with your progress.

Do, or do not. There is no test.

I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  System:

  Toshiba Satellite A-75

  WIndows XP Home Edition
  Fully updated with Svc Pk 3
  HITACHI Travelstar hard drive 80 gig

  Nice day

  I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

  When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

  Chkdsk /r

  (there is a space before the slash)

  Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

  Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

• I have a pc running windows xp and im receives the window\system32\config\system message

  I have a pc running windows xp and im receiving the message window\system32\config\system I do not have a cd-rom drive, how do I get a copy of this disc help please

  Hello

  · What is the number and the model of the computer?

  · Were there any changes made on the computer before the show?

  You can check the link that contains information about the same: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  For the installation disc, you may need to contact the manufacturer of the computer.

• windows\system32\config\system missing or corrupted display.

  I was remove two conflicting security, CA & Ad-Aware programs.  Everything worked great until I rebooted.  Then the black the Windows\system32\config\system missing or damaged screen appeared.  Is there a way to recover my data and restore my computer without the disk restor?

  Provide information on your system, the better you can:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Let me start with this: (never start with KB307545)

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Computer in safemode, blocked: "multi (0) disk (0) partition (1) \WINDOWS\system32\config\system"

  Original title: laptop won't start Windows XP. Shows only a black screen.

  I work on a laptop Gateway MX 3416 running Windows XP Media Center Edition.

  When I turn on the laptop, I see the gateway logo, then white text that says press F11 for recovery of the system, but it goes to a black screen. Pressing on F8 does nothing and if you press the power button, the laptop shut down immediately.
  After you run the Bootcfg command in the Console of a Windows XP disk recovery, I managed to get the ability to run safe mode.
  When I try to run safe mode, it gets stuck at the "multi (0) disk (0) partition (1) \WINDOWS\system32\config\system"
  I have already run chkdsk from the recovery console and it did not show anything.
  I am running out of ideas and any help would be greatly appreciated.
  Hi GreanKube,
   
  Follow the steps in this article to resolve this problem:
  How do I recover from a corrupted registry that prevents Windows XP startup

  
  Warning Do not use the procedure that is described in this article if your computer has an OEM operating system. The hive system on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log in the recovery console to restore the original registry hives.

• Error: "Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM"

  Original title: windows xp, do not load until 08/06/11

  Windows xp2 would not start. I have windows xp on another hard drive but I am unable to see my media files, it shows only a few programs when I check the properties, it shows that 37% of the hard drive is used it is a 40gig drive, how do I get my wma filesand other files? problems on the main drive began when the current was until windows has been completely closed down.the hard drive is almost full ive been impossible to record data due a bad cd Writer.whilst in the recovery console a message came with \windows\system32\config\system missing I don't know where to find and replace this file on xp cd

  Thanks derek

  Hi Derek,.
   
  For the hard disk with the error message, try the steps mentioned in the article given below to resolve this issue:
  How do I recover from a corrupted registry that prevents Windows XP startup
  
  Warning Do not use the procedure that is described in this article if your computer has an OEM operating system. The hive system on OEM installations creates passwords and user accounts that did not exist previously. If you use the procedure that is described in this article, you may not be able to log in the recovery console to restore the original registry hives.
   
  For problems with media files, I suggest you to start a new thread and provide all the necessary information to help us help you better.

• Windows\System32\Config\System is corrupted or missing error

  system32 error
  my ex is to get the windows\system32\config\system missing or damaged error. Unfortunately, she only has more his original cd, can I download a boot disk or recovery disk or whatever it is? The computer won't past this screen. As a side note, I have a student XP Pro installation disc, but it will not even read that.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to begin to try to begin to try to modify or copy files to a hard drive that has a corrupted file system, so this must first be fixed using the XP chkdsk program and run chkdsk on your hard drives may solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Windows xp sp3 corrupted/missing windows system32\config\system

  Due to the plant after installing sp3, I got the message: "windows has not start because the following file is mising or corrupted \windows\system32\config\system."

  Then, I preformed another destructive restore. again, had the same message. Instead of making another destructive recovery, I did a repair.

  Everything was fine, installed all updates etc. Until I installed sp3. I woke up, started the pc and ONCE again, got the same message.

  I have a HP a375c running windows xp (with sp3).

  I can occasionally, to restart, and it will load. But it's unstable. I can't trust to continue trying to restart and then ultimately won't be able to end.

  I also received a message: c:\i386\dist\system32\dll.dll can not be recovered.

  The system is unstable. ANY help would be greatly appreciated. Apparently, will not be supported sp2 for my system more, Windows XP 32-bit Home Edition.

  How can I fix? It seems to me, that's a problem with sp3.

  I'm tired of performing, destructive and non-destructive, System Restore, etc. Over and over again. Only that it is down. As you know, doing the recovery takes ALL DAY, having to get all updates.

  Help, please...

  I use the original recovery cd of HP.

  HP Pavilion A375c Windows XP Home Edition 32-bit

  I changed the drive (long ago) of chkdsk, found no problems.

  I added Ram.

  This message refers to the hive of the registry.  Is to say that the registry is missing or corrupted, in which case it cannot be loaded.  the question is what is the cause of registry errors.

  It would again be a failing hard drive? Perhaps, your poor quality in windows software installation.  Perhaps, you use your system very strongly but not to keep optimized/set up as regular check records and defragments.

  the disk check reconcile file in the file system to the master file table.  because as long as the files are indexed on the mft, then they won't show up missing.  and Defrag makes sure that the files on the disc are not highly fragmented, as your registry hive.   If one of the many fragments that make a single file corrupted, then all the fragments that becomes unusable.

  so, my suggestion is that if you do not have access to a cd to boot xp in order to launch the recovery console and access the drive prompt, then try to do a boot-able with utilities on that cd so that you don't have to use your recovery cd.

  I did not one of them provided by this site, but I've not heard bad things on this subject: http://www.ubcd4win.org/index.htm

  then when you finally get to the disk prompt run command >:

  Chkdsk /r

  the slash r will mark bad sectors on your hard disk and make windows to ignore the wrong places when writing data to the hard drive in the future.

  also, since you seem to escape that you get this type of error several times, then my suggestion is to make a backup of your registry hive.  This way you can restore via a boot-able floppy.

  If the disk check / r fails to correct the problem with the registry, then you can replace it with a base in a safe place inside the windows folder.

  Keep us updated on your condition.