Help: stop Windows Firewall-Savior popping

Similar Questions

• Re: Need help with Windows Firewall

  Can someone help me please?
  When I go to my windows firewall and press on the tab exceptions, if I check the boxes next to the program, does that mean that this request is granted through my firewall?
  If I uncheck the box that it is not allowed through?

  Hello

  Since it is a related question of microsoft, please visit the sites of supported microsoft like this: http://www.microsoft.com/technet/security/smallbusiness/prodtech/windowsxp/cfgfwall.mspx

  It is described exactly how to set up the built-in Windows Firewall...

  Welcome and good luck

• How can I stop windows firewall to close my UDP ports after 65 seconds

  I have a camera on my Ethernet network and he and my PC have static IP addresses.

  When my camera sends out frequent packets over UDP is good, but when there is a delay in packets more then 65 seconds the Windows Firewall blocks all packets after the deadline. I turn off the firewall and everything works fine but when I turn it on everything works until a gap longer then 65 seconds occurs. I was able to work around this problem by having the device sends a packet every 30 seconds, but it's causing issues with my data. Also, the problem goes away when I disable the firewall, but I can't do in other words most of the cases.

  Hello BSmitty,

  Thank you for keeping us posted.

  TechNet support forum is better suited for this question. I suggest you to check with TechNet support forum for more information.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps you to get the problem resolved. If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• I have no windows firewall in service. It is said he stopped, what should I do?

  And my space of WMI repository is consistent I have trend micro internet security pro on my pc, but almost a year now and I started having this notification that my firewall stopped.

  As I understand it, trend micro internet security pro has its own firewall. She should have knew the Windows Firewall.

  What I don't understand... is why it took a year before trend stop windows firewall.

  Maybe you want to ask the expert s of trend in the Trend Micro support forums?

  http://eSupport.trendmicro.com/en-us/default.aspx

• For some reason not identified, cannot display windows firewall settings

  On startup, I get a pop up Windows Firewall saying that for an unidentified reason, the firewall settings Windows cannot be displayed.

  When I hit ok on that message and try to open the control panel Windows Firewall, the pop-up message would once again, and I won't be able to see the firewall settings.

  This does not happen every time I restart my PC, but most of the time he does.  When this happens, and sometimes if I wait 10 to
  15 minutes and try again to open Firewall Windows from the control panel again, I am able to see my firewall settings.  Could someone help please?

  Thank you.

  System information:

  XP SP2
  AV installed: Avira, Malwarebytes Anti-Malware

  Analysis with MBAM already, please make sure that the computer is clean. I guess your Avira is the free version, so it is not a firewall component. You might want to look at this information by MVP Ramesh:

  http://WindowsXP.MVPs.org/SharedAccess.htm

  MS - MVP - Elephant Boy computers - don't panic!

• While on internet, set Windows Firewall to 'block all '.

  Original title: Firewall Windows 'block all '.

  With the help of windows Firewall in Win7.

  Is there a way to easily set the firewall to 'Block All' (comings and goings) activity while I'm connected to the internet.

  I'm used to the use of 3rd party firewall and some have the choice of check "block all activity" on a right click of the icon 'taskbar '.

  I will use if go to leave the PC while on the net for more then a few seconds.

  I ask because firewalls 3rd party having this option does not work well with windows7.

  I don't want a process such as the control panel / advanced settings/unnecessary procedures / make / do that / go away/come back / freeze the system.

  Then having to do it all again in reverse to be reconnected.

  A simple one click / two click process that works.

  Anyone?

  Hello

  Thank you to provide us with an opportunity to help Microsoft Community, we are happy to help you.

  A firewall can help prevent hackers or malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers.

  If you want to block all connections using the Windows Firewall, please follow the steps mentioned below.

  1. Open the start menu.
  2. In the search box, search for "Windows Firewall".
  3. In the search results, select "Firewall with Advanced Security Windows".
  4. In the 'Présentation' section, check to see which profile is active. By default, it should 'private profile '.
  5. Click on the link marked "Windows Firewall properties.
  6. Select the tab 'private profile '.
  7. Make sure that "Firewall State" is set to "on (recommended)."
  8. Under "Incoming connections" click the menu drop down and select "Block all connections."
  9. Under "Outbound connections" click the menu drop down and select "block".
  10. Next to "Protected network connections", click on the button "Customize".
  11. Make sure all of the checkboxes are marked, especially 'Connection to the Local network' and 'Wireless network connection' (as appropriate).
  12. Click on the OK"" button. Closing this dialog box, click on the 'OK' button on the next dialog box.

  For more information, please see the link below.

  Windows Firewall with Advanced Security Properties Page

  Hope that the information provided is useful. Keep us updated on the State of the question, so that we can help you further.

• the Windows Firewall has stopped working

  I tried the system restore to just before it stopped working

  Hi geoffrey,.

  System restore would have been my first suggestion, so that was an excellent choice on your part.  I would try it again maybe a few days earlier just to be safe, he did not start before you really notice or before, it became clear, as it is certainly the simplest answer, but frankly, I doubt that it will be more effective (but who knows - he can come back works perfectly and we are both happy, it was considered).  He also suggested that you know a little about computers, so I can provide instructions that contain everything you need but I will not go into nauseous detail unless you get stuck on a step and then you should post any problem you encounter and I will provide more help.  If you should post, don't forget to answer as many questions and include both the results of the proceedings or reports or copies or screenshots of screen that you can at the same time, so we can work on what to do then if none of this made the turn.

  How do you know if what she has stopped working?  Do you have an error message (if so, what was the full and exact message Word for Word, including all codes)?  You have more than one firewall installed on your system (like that which is part of Norton Internet Security, Comodo, or something else)?  What security programs do you use and that you have installed (all names and versions)?  What version of Windows you are using (for example, 32-bit Vista Business SP2 or other - please be precise otherwise)?  When this occurred and did you a software or a hardware changes (additions, deletions, upgrades or anything like that) since two weeks before the problem (if so, precisely what has been done in as much detail as possible)?

  Do you get this Center security or firewall Windows itself?  If you are using XP, post back with answers given that there is a limit to the options how can I cover without knowing the basic information.  If you use Vista or W7, go to Security Center or action center and check to see if there is a problem with the notification of the firewall or it's on.  If it's not on, it shows the details or links containing information about the problem?  If Yes, go to these links and copy the information and post here, so we can look at.

  Then go into firewall Windows itself (on the left side of the screen) and confirm that there is a problem.  If she too says it is disabled, click on change settings.  Make sure the firewall is turned on - if not turn it on, click on apply and then click OK and confirm that it starts and begins to work.  If it does not start, it provides an error message (If Yes, what is completely and exactly Word for Word with all codes)?  Click Advanced, and verify that all network connections are checked - make if all are not and click OK, then again try to turn on the firewall.

  If this does not work, go to start / Control Panel / Administrative Tools / Services and then highlight the Windows Firewall and click Open.  Click dependencies and go to each of them and make sure they are started and automatic.  Otherwise change it to automatic and start them.  If it is impossible to do, check their dependencies and do the same until you reach the end of the chain of dependence.  Now return to Windows Firewall and make sure that it is set to automatic and started.  Then restart.  When the system returns, return to the service and confirm that the Windows Firewall is started and automatic.

  Now, go into Windows Firewall and again try to launch and see if it lights.  Go to the center of security or Action and check that the firewall is enabled and works.  If so, the problem can be solved.  Just to be sure, restart and check the firewall to ensure that it is on and working.  If so, who should be the one.  But we do not know why it stopped, and if the problem may come back, then we must redouble efforts to find the cause or confirm that there is no problem.  Moreover, if the above did not work and Windows Firewall is still off, here's what you should do in any case.

  Go to start / Control Panel / administrative tools / Event Viewer and look for error messages regarding the Windows Firewall (there will be errors).  Look in system first and then in Applications.  When you find the error or errors, click on it for details, copy these details and display them in your next reply.  Well, they can help us identify the source of the problem and there a fix for it.

  We will check your system and hard disk for corruption files and try to fix it:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  , Type sfc/scannow go and let it run.  It will scan and try to the difficulty of some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  They tried to set itself to run at the next reboot.   Answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.

  Then, we will confirm this is not caused by a malware any.

  Update and run a full scan with no matter what security software you use, and remove or quarantine everything you find.

  First, try the following programs if you do not, because they can help. I recommend you download, install, update and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/ and then run a full scan of Microsoft Security:http://www.microsoft.com/security/default.aspx. This may or may not remove the infections, but will probably not correct the damage caused by them. Even if they or your current AV software seem to work or indicate that you are not infected, you should not completely trust in them and must continue with the recommendations that follow (so it's up to you if you want to try them first, or just ignore all this and get help from an expert you really need as described below).

  Correctly and completely remove these infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I suggest what follows in any case, so that we can start it (you can ignore the methods above if you want it really is the way forward, but it won't hurt to them for trying).

  Please follow these recommendations of JimR1 - MVP compliments:

  You are running Microsoft Security Essentials?

  If Yes: start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  If you are in North America, you can call 866-727-2338 for a free Microsoft Help for infections of virus and spyware.

  Otherwise:

  You can start here: https://consumersecuritysupport.Microsoft.com/ or here: http://support.Microsoft.com/contactus/cu_sc_virsec_master?WS=support#TAB0 for the help and support for malware infections.

  If this does not work, or that they can't help, try one of the compliments of forums-remove malware following PA Bear - MVP:

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?Board=10.0 http://www.spywarewarrior.com/viewforum.php?f=5 http://www.dslreports.com/Forum/Cleanup http://www.Bluetack.co.uk/forums/index.php and http://Aumha.net/viewforum.php?f=30

  I hope this helps.  If none of this worked, then after return with answers to ALL the questions above (especially the first paragraph) and the results of all the procedures and the test that you tried in as much detail as possible and with two copies of reports or screenshots (as you prefer).  Without this information, we do not know where to go next without guessing or recommend a more radical proposal that may be required.

  Good luck!

• The Windows Firewall has stopped working, 0x8007042c error code

  The Windows Firewall has stopped working.

  See if this helps: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/firewall-will-not-turn-on/57a4cce5-835f-e011-8dfc-68b599b31bf5

• Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

  I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

  Someone tell me the permanent solution of this problem?
  
  
  
  

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://support.Microsoft.com/kb/322756

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Event ID: 7024 with error message: "the Windows Firewall service stopped with the error service specific data are invalid.

  Original title: cannot start Service Windows Firewall: Error Code 13

  Hello.

  Anyway, the Action Center has begun randomly telling me that the Windows Firewall is disabled. When I try to start or return to the default settings, it tells me that it is not able to do.

  I went to Services and Windows Firewall is set to automatic, but it is not started. I try to start it and it tells me that it is not able to do the same. The error code is 13.

  I am an administrator.

  MalwareBytes did find and delete a virus named "Disable.SecurityCenter", but after removing that I am still unable to start the Service.

  Can someone help with this problem?

  Edit: The journal ID is 7024 and description:

  "The Windows Firewall service stopped with the error service specific data are not valid... '. ».

  Hello, Connor

  You can try to perform a system restore to before that the problem started. For instructions on how to proceed, see the following ink: System Restore: frequently asked questions

  You can also try running a SFC scan to check (and repair) system corrupt/modified files. To do this, go to start, all programs, accessories, click with the right button on command prompt and choose Run as administrator. In the command prompt, type the following command and press ENTER: SFC/scannow

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help, please! I can't start my windows firewall!

  When I click on the windows firewall icon in Control Panel, it says 'due to an identified problem, windows cannot display Windows Firewall settings,' WHY?

  Hello

  According to this page, that this happens because of the missing or damaged SharedAccess reg key, which represents the Windows Firewall Service.

  http://WindowsXP.MVPs.org/SharedAccess.htm

  Please follow the instructions on the recommended Internet site. Perhaps it will help you solve the problem.
  Thanks for posting if you re successful.

• Why Windows Firewall always stops when I turn on the computer - even if she did before? How can I keep it on recommended setting when I shut down the computer?

  I always change the tuning parameters recommended on Windows Firewall, when I turn on the computer, otherwise it reads in red writing "Windows Firewall does not protect your computer." The network location is the Public network.

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• Help with Windows XP SP3 firewall off

  Hello

  I have XP SP3 and I have a problem with my firewall settings.

  It is said that they are turned off and strategy group or another FW is running.

  I checked with Avast, and they have not a firewall in it isn't my virus and as far as I know that I don't have anything else like a FW.

  I've set up exceptions in my firewall Windows however, they will not work unless it is on.

  I checked the services and it is said that the Windows Firewall is running.

  I'm confused.  Please help, I have spent days on this.

  Thank you

  Oz

  What version of XP are you running: Home, Pro or MCE?

  Try this:
  Start | Control Panel | Security Center
  You should see something that looks like this:
  
  http://www.homeandlearn.co.UK/BC/images2/security.jpg
  Do you have? Your firewall is on or off?
  Also look here since some programs have been known to interfere with the Windows Firewall (check the solution proposed by Malke):

  http://www.TomsHardware.com/Forum/135134-45-Windows-Firewall

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• Cannot connect XBox Media Center PC. Telling me there are problems of connection or firewall issues. Check the windows firewall. I'm a noob to all the rest. Help!

  I checked the windows firewall. Only other thing I'm running is microsoft security essentials. I use At & t UVerse for cable and internet.

  I'm a noob to computer. Help!

  Hello

  · What is the exact error message that you receive with the error code as appropriate?

  You can try the steps listed in the links below and check if it helps: Configure the Windows Media Center Extender Firewall: http://www.microsoft.com/windowsxp/mediacenter/extender/setup/firewall/winfirewall.mspx

  As he tried to connect your console Xbox 360 as a Media Center Extender, you receive the error message: 'Xbox 360 not found': http://support.microsoft.com/kb/911129