help t540p bios ahci m.2 ssd

I can't find bios sata AHCI mode menu

I use m.2ssd 256 GB

Help me

I want to boot os 2ssd, m!

Configuration of the BIOS menu Config, Serial ATA.
To install SSD m.2 as disc bootable boot priority (Start menu)

Tags: ThinkPad Notebooks

Similar Questions

  • BIOS does not see SSD - Dell Latitude D630

    Hello

    I have been using the old, but still quite fast Dell D630. Lately, I decided to replace the HDD with SSD - SP800 Adata first, and the Bios can't see it.

    I installed the latest version of the Bios, tried changing the settings to AHCI, etc... but without any effect. Can anyone help?

    I checked the SSD in my stationary computer and it works.

    Thank you

    Hi caton17,

    I suggest you to check if the SSD is installed in the drive Bay and the dimensions of the SSD. Reinstall the drive and check if it is detected in the BIOS.

  • Activate the AHCI for Samsung SSD on Pavilion DV9910us

    Updated DV9910us for Win7 64 bit, 4 GB RAM, installed Bios version F34, 830 SSD from Samsung.

    It is a processor AMD Turion TL-60.

    Samsung software magician said that AHCI is not enabled.  Device Manager shows no AHCI hardware or drivers installed.

    I understand that a system with Intel would not have this problem, but is there a solution for this? My random reads are abiysmal (6008 IOPS / s).

    Hello, @KipIsbell

    Welcome to the HP Forums.

    Unfortunately, what you're trying to do is not an available option in this notebook. Generally, you would change setting from the BIOS so it was an available setting.

    If you have not updated your BIOS, you can try this but no guarantee that it will have this feature.

    Sorry for the inconvenience that this may cause.
    Thanks for posting on the HP Forums.

  • Z620: need help with the difference ("boot") of ssd pci-e cards and pci-e (BIOS) nand

    Hello

    I intend to buy a card pci-express ssd for access/faster transfer, and I read the topics concerning the problem of booting from that ssd, but still did not understand much to be honest.

    what I noticed, is that HP620 should work with older (like turbodrive Z), but not the based NAND, new Z turbodrive G2,.

    or only with a few tricks.

    now to my question.

    Some people say, this new nand ssd pci - e cards require a boot uefi bios and a few options, I do not understand.

    as I have a regular bios (not), is it true that you cannot boot from these new ssd expansion slot, or are there tricks like the passage to the AHCI and a few other options in the bios?

    If this is not possible, I'd be limited to regular use SATA ssd, limited to 500 MB/s of bandwidth, right?

    Thanks for any help

    Chris

    Found this info on the web;

    "There are actually two versions of the player. The original version uses the familiar AHCI Protocol, while a new variant is the NVM Express standard. The model of the AHCI is compatible with a wide range of motherboards and available among a wider selection of suppliers. »

    The version of NVMe is also supposed to be faster, but in reality, it is not much of a difference.

    I think that you need a motherboard with a socket m2 is to see a real difference in speed compared to the old version of AHCI.

    I understand that it is only the most recent Zx40 HP series range that supports readers NVMe but not sure 100%. It would certainly be a challenge trying to get one to work in a series of Zx20 HZ.

    My SM951 in CrystalDiskMark 5;

  • Satellite L30-134 does not access BIOS after upgrade with SSD

    Hello

    I have a problem with my old Toshiba L30-134.

    When I try to replace the old with new SSD HARD drive, I can't start BIOS.
    But when I remove the DVD-ROM laptop and leave there only SSD, then BIOS can start and I see the drive detected. DVD - ROM has PATA/IDE interface.

    I also tried IDE adapter SATA (like this: [adapter | http://goo.gl/W3TpXt]) for replacement of the DVD-ROM with second SATA HDD and I had the same problem when the disk was present in the adapter.

    When the second HARD drive was not present in the adapter, BIOS began. And it's not just about BIOS.

    Computer is blocking on startup TOSHIBA logo screen during the hardware detection and there is also no error message.

    I can't change the settings on the device SATA IDE/AHCI mode. Is there a workaround with riders or a software solution?

    Thanks for help

    Hello

    > When the second HARD drive was not present in the adapter, BIOS has begun. And it's not just about BIOS.

    You replaced the STRANGE with a HARD drive?
    It won't work buddy. The s laptop computer's optical disc drive supports IDE controller. The HARD drive seems to support the SATA controller.

    The laptop does not power upward because the POST (power on self-test) cannot be passed correctly. During POST the laptop s material will be checked for a possible malfunction or compatibility issues. In your case, the hardware is NOT compatible and that you can't change that.

  • Satego x 200-BIOS does not detect SSD but windows 7 for OS usage

    need help here, I got the latest bios 2.50 and my bios does not detect the SSD but an I start windows 7 from my hard drive it is detected and I want to use the ssd as boot drive, please help

    Hello

    Which SSD drive you have exactly?
    I also think it s a compatibility problem between the HARD disk controller (motherboard) and the current SSD drive.

    So you should check if you have the latest firmware of the SSD drive and if it of possible, try another disc SSD of a friend, for example.

    By the way: have you tried to load the default settings in the BIOS?

  • Satellite L735-103 bios recognize 850 Evo SSD

    Hello!

    My HARD drive has stopped working so I bought an Evo 850 SSD to replace. The problem is that the Bios not recognize, even with the AHCI enabled.

    Does anyone have a solution?

    Concerning

    I am also having the same problem... but I have a different model to yours (L50-B02l) and my Intel SSD 520 will not be detected by the bios. I think it is a Toshiba wide problem rather than a problem of incompatibility of model.

  • HP envy 14-2090eo: activate the ahci with new ssd on hp envy 14-2090eo

    Hi Hp experts...

    I just ordered a Samsung 850 evo 500 GB ssd, replace the drive hard seagate 750 GB original in my HP Envy 14-2090eo. I then took a peek in the Device Manager and found that when I click the menu ATA/ATAPI IDE controller, it shows a new field saying: Intel(r) Mobile Express Chipset SATA AHCI Controller. Does this mean that AHCI is enabled automatically when I install the Samsung 850 evo 500 GB ssd? Its because I don't have any options the normally settings in the BIOS to change to AHCI mode and then he hit me maybe its on automatically, or what I have to do to switch to AHCI mode, which I have heard is the best setting when installing SSD´s...

    Best regards to all

    Hello:

    Yes, he does.  AHCI is enabled and cannot be changed.

  • Want to use AHCI with SATA SSD on tiny 1000 (1151NR)

    Hello

    I have a Mini 1000 (1151NR - embedded Verizon 3G model of modem).

    HP product number is: NM123UA #ABA

    I recently installed an SSD, and I hope that I can switch the mode of the IDE in AHCI mode to improve performance.  I tried to use the instructions in this thread - http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/SATA-drivers-for-XP-solution-on-0x000000...

    However, once the Windows installation starts at the top, nor the F6 option for drivers or the automatic detection of storage provides an option to use the SATA/AHCI drivers.

    I am aware that the BIOS for this product does not have a SATA option, but I hope that there is always a way to allow this, because I know that the Intel chipset is able to support the SATA AHCI.

    Can someone tell me if this is possible (or, Alternatively, certainly not possible)?

    Thank you

    John

    If the XP installation does not have a hard drive, then the AHCI is enabled in the bios.

  • help with bios/ram

    Hi all

    the story is as follows:

    I have a HP a1555a desktop computer. If it was repaired by HP, they replaced the motherboard. Twice in fact, first replacement was defective also.

    Now when I go into the bios it says the following: revision of the Bios: 3.24 18/01/07

    Basic verion: 08.00.12

    Model number: (nothing - blank)

    Product number: Asteropi

    Build IDS: NULL

    before you have my correct model number, product ID numbers and build now. Also, I can not use hp update because it does not recognize the model as HP.

    The above is without real drama, except that I put in an additional stick of RAM and he does not notice the second Bank. It only recognizes the first bank or ram, which was installed by hp. In the bios it's all gray and I seem to think that it is a bios issue that caused the above questions.

    Any help would be greatly appreciated, and yes my ram is ok.

    Is it possible to erase the bios completely? and start again.

    Thanks in advance ~!

    Try to take the CMOS battery, clear the CMOS jumpers on your motherboard, and finally try retting your BIOS settings in the BIOS.

  • Portege Z835 - need help with BIOS update

    Hello.

    I have a Portege Z835, with a battery problem: do not load. The battery indicator says "3% connected load" but it doesn't load the battery.

    Some forums said that the solution is updating the Bios. I have a Bios Update v.1.60 ready to install. When I try to install, we get the message "the battery power is not enough.

    My power cord is still connected. If I unplug the power cord, the laptop is turned off.

    Please, what can I do?

    Thank you.

    F.

    To be honest I don't think it's the related issue of the BIOS. AFAIK battery must be charged, even if the laptop is turned OFF so why BIOS update if the battery can not be charged at all.

    To me that sounds like hardware related issue.

    How old is your Portege?
    Warranty is still valid?

    Maybe you should contact Toshiba service and ask for help or even their opinion.

  • spectrum xt: need help with BIOS pwd

    Hi, need help here, I also forgot the BIOS pwd

    and I like code 59838445

    Thank you!

    Hello

    Enter 46790481

    Kind regards

    DP - K

  • Need help updating Bios dc7800 Compact Mini Tower: ROM CAB missing or damaged

    I need help, updated the BIOS on my HP dc7800 CMT. I get this error message:

    System BIOS updte file (. C:\Users\f\Downloads\ROM CAB) is missing or damaged. THE system BIOS does not update.

    I tried to update using the sp53611.exe (8.0 MB) 1.32 Rev A(6 Dec 2011) HP Compaq Business Desktop system BIOS (BIOS 786F1)

    Which can be found here.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3459243 & swItemId = vc_97114_1 & swEnvOid = 4059

    The current version of my BIOS is: 786F1 v01.04 2007-07-18

    I am running Windows 7 64-bit Ultiate. I noticed on the page (linked above) software, it mentions most of the flavors of Windows 7 64-bit, but it does not mention Win 7 ULTIMATE 64-ditch.

    Here's what I did:

    (1) computer restarted in safe mode

    (2) connected as administrator

    (3) Task Manager began to ensure that all applications and most of the services have been arrested

    3 (a) as an additional precaustion, I even stopped Windows Defeneder

    (4) double clicked on sp53611.exe and let it install the software.

    (5) This opens a web page. I clicked on the link which was under the Bio update to a windows environment.

    (6) the process has started, but then I got the above error.

    Any ideas on what to do next?

    Is it possible that the BIOS cannot be updated because the software does not support windows 7 64 bit ULTIMATE?

    Thank you in advance. I have a new graphics card today (Radeon HD 6570 - who has been recommended by Mr. Paul Tikkanen, thank you), and I guess I should have my current BIOS a bit, no?

    Hello:

    There should be no need to update the BIOS, if everything is working properly.

    If you want to update the BIOS, you must use the built in Flash ROM of system menu in the BIOS.

    It is the safest and easiest way to Flash the BIOS.

    All you need is a USB stick formatted with the FAT 32 file system.

    Download the latest BIOS update, then run it.

    You should get a page of instructions.  On this page, you want the option F10 system flash rom and you should see a summary of BACK flash folder view.

    Copy all the files in this folder on your USB.

    Plug the drive into the usb port, restart the PC and at the beginning of the HP welcome screen, press the F10 key to access the BIOS.

    There will be a menu to System Flash ROM

    What to choose and it should see the BIOS update files on the usb flash drive.  Then follow the instructions on the screen to proceed to the update of the BIOS.

  • Need help with bios

    Hello, I recently got a "pny nvidia geforce gtx 750 1 GB ddr5' and I tried to install it and I heard a sound of beeping 3 times and got a black screen, indicating the model number of gpu and I went on the web to see solutions. I tried many of them but two, one is to buy a new motherboard and other is install the latest driver for bios. I had no money, so I went with a bios update. As I tried to update I got an error message "253" Please help. my pc specs "hp Pavilion slimline 1224, UC-i3-3240 upgraded, gpu no, 1 TB hdd, 6 GB of ram."

    When you request support, please provide the full model name and product number (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

    The information requested above are on the side, back or bottom of your computer, or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

    Assuming that you mean that you have a desktop HP Pavilion Slimline s5-1224, there is no update BIOS in the WIndows 7 section of the page of drivers of desktop HP Pavilion Slimline s5-1224. The error you get indicates that the update is not for the version of the BIOS of motherboard and base of your computer.

    Again, it is likely that the video cards, you tried are incompatible with the motherboard of your computer. In addition, power supply factory is only rated at 220 watts and is unlikely to properly feed a 750 GTX graphics card that requires power system rated at 400 watts or greater.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Need help with BIOS on my Satellite L40

    Hi all

    guys I have two problems with my BIOS:

    1st. as my portable computer power does not start anything, or nothing works
    (even no sound of the fan or anything like that, no seeing covers but the power, battery covers)
    (it happened before two weeks they said that they have updated the bios)
    (it happens when my laptop is a download online or something and is running out of battery in the two times)

    2nd when it was working I could not adjust the brightness of the screen, or apply the power saving options

    So please tell me if I can reset or update my BIOS in material and how
    I use PSL4CE, Vista operating system.

    null

    > 1. as my portable computer power does not start anything, or nothing works
    (even no sound of the fan or anything like that, no seeing covers but the power, battery covers)
    (it happened before two weeks they said that they have updated the bios)
    (it happens when my laptop is a download online or something and is running out of battery in the two times)

    If I understand this problem started after the BIOS update. Maybe you used a bad BIOS or something went wrong during the BIOS update process.
    But wait; try to remove the battery and the AC adapter. Wait for about 20-30 min. After this short period of time connect the two parts, and try to start Notepad.

    > So please tell me if I can reset or update my BIOS in material and how
    If the accelerated procedure described above help doesn t, then you have some many other opportunities. In case you should contact the ASP in your country and should ask for the BIOS flash may be that you're a lucky guy and the mobo is not too bad!

    Good luck

Maybe you are looking for