Help the CBO to make the right choice

Similar Questions

• Timed sequences. Is this the right choice and how it works!

  Hello!

  I am a newbie in LV, and I am creating a VI that is able to fly a small filtration unit I have build in my engineering studies.

  I have to control three magnetive valves which are connected to the Do0, Do1 and Do2 digital output on my USB 6009 MyDAQ device port.

  I have to control the sequence in which the valves open / farm as to avoid damage to the sensitive som of pressure transmitters. How to program a sequence of controlled time that opens and closes the valves in the right order, and in order reverse, repeat the sequential once a user defined timing?

  I have looked at the 'timed sequence' but could not find a "down to earth" description on how to use it.

  Perhaps my problem is a little in general. In this case I can certainly help with precision if necessary.

  I hope someone can help me with my problem. Now, I spent 6 hours looking at different tutorials without a bit of luck.

  Thanks in advance

  Henrik

  
  

• Hello. I need help to identify the right choice of processor for updating my old PC system.

  Hello. I would be eternally grateful if someone can help me identify the processors will work with my system.

  The HP site says that my system supports up to Pentium 4 Hyper Threading 3.8 GHz processor.

  The main reason is if I install Windows7 operating system.

  I bought a CPU on eBay but it does not work when it was inserted. When you turn on the PC, no light illuminates and the system does not start. When you look at the inside of the case of the processor cooling fan works, but that's all. No lights or anything else, not even the fan starts.

  The processor is a Pentium 4 HT 661 SL96H 3.6 GHz 2 MB 800 MHz LGA775

  My system is...

  Compaq Presario SR1339uk

  Serial number: {removed privacy}

  System number: PS267AA

  Motherboard: Asus PTGD1 - LA

  Chipset: I915P Northbridge

  Southbridge ICH6 Intel i/o Controller Hub 6

  BIOS version: 3.28 23/01/06

  Operating system: Windows XP Home Edition 32-bit

  Any help much appreciated... Thank you...

  Sorry for not being clear. I mentioned all processors in HT 6 series like 64-bit processors supported.

• What is the right choice of MAXX?

  I was completing the profile, you are prompted by the investigation and asks him what kind of phone I have.

  The phone itself says Droid Maxx.

  However, the profile options are Ultra Maxx Droid or Droid Razr Maxx?

  I chose Ultra Maxx, but I would like to know if there is a way to say exactly that via the phone.

  The site of Verizon shows the phone as a Droid Maxx. NO Razr or Ultra mentioned.

  Thank you!

  Byrd

  Just to clarify things completely, the actual names are Ultra Droid, Droid Maxx and Droid Mini. Clarifications on this forum, they list the Droid Maxx as Droid Ultra Maxx. They didn't want any confusion on the Droid Razr Maxx, Razr Maxx HD Droid and Droid Maxx. It's a simple solution to prevent people from getting confused. I hope this helps.

• My bevel and Emboss does not recognize the right choice

  So I found a model online. I imported into PS, I then used the perspective deformation tool to stretch it in place. Now I would like to in bevel and Emboss the holes, however, after the selection, he in bevel and grit the model itself. And it is pixelated. I don't know what is happening.

  

  selected holes...

  

  See how it's cut the whole Board? I don't know what is happening. I want that the holes to be cut.

  Thanks in advance,

  Tom

  After you make the selection, choose Cmd + J to put this item on its own layer. Then you apply bevel & Emboss. That should give you the result you are after.

• The search for meaning please - is a data base, the right choice?

  I want to break a problem I have today confronted for centuries and hope someone can point me to a good way around it, so I can do more research and learn the technology required.
  
  The problem is this: sometimes we are asked to create a website which should include items in stock for example.
  
  category, name, description, price, image (s)
  
  We design our websites without the use of templates or software CMS, we simply create an inclusion of some sort and have the stock displayed in a tabular layout based on a data store that is held in the simplest possible.
  
  This isn't an online store - no purchase is possible through cards of credit/paypal etc...
  It is not necessary at this stage for a search
  The data is not sensitive.
  
  For example: a caravan dealer listing their caravans
  
  What should I learn? MySQL / cms / xml which is the best way to achieve this?
  
  All suggestions help resources would be most appreciated
  Thank you for your time.

  [email protected] wrote:
  > Thanks that was on site.
  >
  > I have now managed to create a link to a mysql database and have
  > created a region repeated around the data base.
  >
  > Could you please clarify something, I found hard to believe?
  >
  > Dreamweaver can't display natively (jpg) images in a BLOB field.
  > It shows just rubbish?
  >
  > I have instead created a VARTEXT and written in /images/picname.jpg instead
  > which seems ok, but a bit slow.
  >
  > Not there at - it no work around / etc plugin that can work around this limitation?

  It is common to only store the name of the image file in the database,
  then fill the image on the page of polarity tag dynamically
  path and name of the file.

  Using a blob is possible, but there is no native in Dreamweaver, or
  all of the extensions I know who allow it.

  The best way to do it is to have a separate page that receives an ID.
  then export the blob in a binary stream.

  Then, you use something like this:

  

  As long as the blobtoimage.php sends the binary stream with the
  correct mime type, then it will work very well.

  If you do so, split your table with the blobs of your hand
  data, you will get performance better that way.

  Dooza
  --
  Display guidelines
  http://www.Adobe.com/support/forums/guidelines.html
  How to ask Smart Questions
  http://www.CatB.org/ESR/FAQs/smart-questions.html

• Help the new choice of hard drive

  I want to add another hard drive but don't know what to get. No matter what ATA to choose? (100 150 or 300). I'll get my memory in 6400 DDR2 at 800 mhz and eventually upgrade my processor. Like to go to a Quad core or even the slightest line QX. Any advice would be appreciated.

  
  

• "Cannot be reset. "HELP the required partition is missing.

  So I tried to delete windows 8 completely off my computer from the bios. The two partitions, I had was "Recovery" and my other main drive. so I formatted my main drive to remove windows 8 of my computer. now instead of saying "Boot Manager is missing"(ce que je veux arriver parce que je sais pas quoi faire de là), my computer starts with a logo of windows 8 and it says "pc repair". "." After he know that he just can't fix anything it sends me to recovery.if I press reset it tells me the score is missing. Means that I can not install another OS? I want to install windows 7, that's why I tried to format the drive, and also because I had a diary for windows srttrail error 8 which was irreparable no matter what I tried. Is windows 8 always on my pc? I know that I have not a not format the disk bad because theres only 2 drivse with content on it! Im going to buy windows 7 soon and I want to install. Could I do it? my computer is completely gone? I could just install windows 7 on a partition I formatted. IM super confused

  Hello Purpleice,

  Thanks for posting your question on the Forum of the Microsoft community.

  You can not downgrade from Windows 8 for Windows 7 and Microsoft also does not recommend it. However if you still want to install Windows 7 on your computer you will need to boot from the Installation of Windows 7 support and then try to install Windows 7.

  Also, if you wish to format it is recommended that you start the computer using the windows installation media 7 and then format the disks. After formatting the drive, you will need to install Windows 7 on one of the main partition.

  Note: you must change the boot priority to the media through which you try to start Windows 7.

  There is no guarantee that all built-in Windows 7 drivers will include specific hardware. Therefore, please make sure you have the correct drivers available before starting the installation. Pilots usually come on CD/DVD provided by the manufacturer with the newly purchased equipment. Alternatively, you can also download the official vendor Web sites. Have the drivers available will ensure that, after I installed Windows 7, your system will happen in all its fullness. If you meet the above three conditions, we are ready to go.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Boot from the Windows 7 DVD

  The first step is to place your Windows 7 DVD into the DVD tray and start the machine. Your computer must be configured to boot from the DVD. This is done via the BIOS. On most computers, the BIOS menu are accessible by pressing F2 or Del key while the machine starts.

  

  Once you complete this step, Windows 7 will begin to load. If you see the image below, you're doing good so far.

  

  After a few moments, you reach the installation menu. Your first step is to choose the language and keyboard.

  

  You will now have the menu install now. We have already prepared for installation, so you can click install now and move forward.

  

  The next step is to accept the license agreement.

  

  As you install Windows 7 on Windows 8 that is why you must select Custom Installation the list form.

  

  Partitioning

  The next step is to choose where you want to install Windows 7. It is probably the most important part of the entire plant, but be careful here and make the right choices.

  

  After selecting the drive to install Windows 7, click Next.

  Start the installation

  If you are uncomfortable with your configuration, select the created partition and click Next. Windows 7 will be installed on this partition. Depending on your hardware, this can take some time. My tests show about 30-40 minutes.

  

  During the installation, your computer may restart several times. So be.

  User settings

  Finally, you will be asked to provide your user name and a computer name. You can also password - protect your account. It is the most recommended. You should opt for a password strong.

  

  

  Activation

  The next step is to activate your Windows. Take your key and type it here.

  

  After entering the key, click Next. After that Windows 7 will be installed on your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Do not consider the right colors

  Hello.

  I have problem with color Photoshop CS % shows my picture with.

  I have all other programs, ACDSee, Snag-It, Picasa and... - my color photos is OK.

  But I have to open the same image in Photoshop CS5, the color changes of colours, I don't like.  Se the image.

  My set is a Nvidia GeForce GTX 660 with opdated drivers - driverversion is 337.88.

  Hope someone can help me.

  

  Looks like a problem of color for me.

  Photoshop strives to show you accurate color rendition, by your images color profiles and color associated with your monitor profile.  Many / most of the other programs are not proper color management. It is the key.  You can interpret the color you like as the 'proper' color, when in fact it's one that's not going to.

  If your monitor profile describes accurately the characteristics of color of your screen, then it's the other programs that display the images in a supersaturated way, because they do not take into account the monitor's color profile.  Trust what you see from Photoshop.

  Chances are, given the images you posted, it could happen: your monitor is a model of the range of colors and Photoshop sees a profile associated (by OS) who tells him that, and so Photoshop color - managed accordingly: colors in the images marked with the sRGB IEC61966 - 2.1 profile are desaturated some , for an accurate display.  Other applications that ignore the color profile of the monitor will not transform the colors and will be over-saturating them.

  Another problem as possible: the monitor profile may not describe accurately the monitor.

  Color management is a bit too complex to try to teach the post by post on a forum.  I suggest that you are looking for information about it online.  Beware of people ' all mean ', because it is not a thing, you can just set and forget and do things.  You must wrap your mind on how it all works in order to make the right choices on your system.

  What do you see in the dialog box color management of your operating system?

  -Christmas

• Choose the right power supply for hp P6180t

  Hi I'm going to buy a new power supply soon for my HP pavilion p6180t desktop computer and I started a 300w to the corsair cx750 power level. I also want to get a new graphics card soon something in the mid-range. I was wondering if this power supply is the right choice, or if its too much for my computer because I read in another forum that you do not want a power supply with a lot more power you will actually need. For a gtx 660, the minimum is 600w I think so I wanted to just make sure that the power supply is the right choice for my computer. Thank you

  In fact, I think that the minimum for a gtx660 is 450w. I think a 750w for this computer is excessive. A 500w would be a lot. But if you buy one with too much power is just a waste of money it actually will not cause a problem. Like putting gasoline in an engine that doesn't need only regular.

• The right click detection

  Hi again, Im trying to get an event on right click, but I can't work...
  I also did not find anything with the Research Council of events secondary mousebutton
  
  Here is my idea:
  I got a list of items and I want to detect a right-click on each element event.
  
  IM waiting for that (event.isSecondaryButtonDown ()) is not the right choice, but I've already tried
  a lot of different things with no results.
  
  

      for (int j = 0; j < playground.size(); j++)
      {
        final int x = j;
        
        playground.get(j).setOnMouseClicked(new EventHandler<MouseEvent>()
        {
          public void handle(MouseEvent event)
          {
            
            if (event.isSecondaryButtonDown())
            {
              System.out.println("got it");
            }
          }
  
        });
      }

  Thanks for the help,
  Martin

  It is a great thing that is weird and seems to be something wrong with swing or something like that. Before analyzing the problem, you can use

  if(event.getButton()==MouseButton.SECONDARY)
  

  Instead of isSecondaryButtonDown() which I think is the standard way, because if the mouse is "clicked" I understand that at the time when the event is dispatched, the button is not pressed.

  The strangest thing is:

  (a) If you are creating elements inside a stadium of the isSecondaryButtonDown is always false
  (b) If you are creating a scene and a scene but include you this scene inside a JFXPanel and within a framework of the method returns true, perhaps because there is something different between swing and javafx mouseEvent dispatching

  Published by: anderruiz on July 28, 2011 03:53

• I don't know if I'm in the right place.  Adobe doesn't make it easy to get help.  My problem: several years ago, I bought Photshop elements 6.  Recently, I got a new pc running Windows 7 Professional.  My new pc is not a CD player.  Where can

  Several years ago, I bought Photoehop items 6.  I got a new pc runiing Windows 7 Professional.  It is not a CD player.  Where can I go to download a full version?

  Locking of this discussion because it is a duplicate of I don't know if I'm in the right place.  Adobe doesn't make it easy to get help.  My problem: several years ago, I bought Photshop elements 6.  Recently, I got a new pc running Windows 7 Professional.  My new pc is not a CD player.  Where can

• my mouse move as a magnet on it what can I do to make the right move? Help, please

  my moving the mouse in a mode of travel. or as a magnet is about this, do not move to the right please help

  Hi, is this a problem specific to Firefox?

• Make a right click on the e-mail list no longer opens the context menu.

  Hello world
  Thunderbird collapsed to display the context menu on the mailing list recently. Make a right-click displays just the cross line. What is the problem could be?
  Thanks anyone for any help.

  Win 8.1 64
  Thun 31.3.0

  Very strange.
  Make a right click on the email list should open a menu drop-down.
  Usually a line crossed through something means that it is marked as deleted in an imap e-mail account.

  • http://KB.mozillazine.org/Deleting_messages_in_IMAP_accounts

  See if there is a conflict with an add-on.
  Restart Thunderbird in safe mode.
  Help > restart with disabled addons.

  then run the same test; Right click on the email list.
  Do you get the drop down, if so, then one of your addons is the origin of the conflict.
  You'd have to disbale each in turn to find what the problem is.
  Maybe the addon should update.
  Report on the results.

• Make a right-click opens menu long, I tried a lot of bugs found in the forums

  Under Firefox 33.0 puppy 5.7.1 Linux on a desktop PC.

  Make a right-click opens menu long, exactly as described in

  support.mozilla.org/en-US/questions/956675

  I have disabled all extensions and plugins, I tried safe mode, reset Firefox.

  I uninstalled Firefox and re-installed.

  I have SeaMonkey (2.19) on the same machine, and it works fine. I have no problem with any other software on this computer.

  Thanks in advance for your help.
  Piers.

  Is your copy of Mozilla's Firefox, or was it provided by your favorite distribution? Maybe your distro added some extra features in Firefox for a better integration. If you haven't already done so, try to download a copy here and see if you get a menu popup long in the executable file:

  • https://www.Mozilla.org/en-us/Firefox/all/

  If that doesn't help also, you may need to use the extension to hide the context menu entries:

  • https://addons.Mozilla.org/en-us/Firefox/addon/menu-editor/