Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

Greetings.

I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

Ideas?

Thanks for the help.

Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.

Tags: VMware

Similar Questions

  • CPU has been disabled by the guest operating system error

    Running VMPlayer 3.1.3 version 324285 build on Windows 7 Enterprise 64 bit with 8G of memory.

    When I try to install some VMs based on Linux of ISOs, in a few seconds, I get the error:

    "The CPU has been disabled by the guest operating system. You must turn off or reset the virtual machine at this point. »

    (See also the screenshot attached)

    This happens on other ISOs based on Linux/Windows. I googled the web & VMTN, but have not found relevant

    answer my question.

    Thanks in advance

    Alex

    Hello

    What operating system is tryining install you?

    Take a minute to watch in VMware Compatibility Guide: search guest conductor /and try to upgrade to a version 3.1.4 If your system does not support the direct execution of 64-bit.

    Concerning

  • Win7 «...» CPU has been disabled... »

    The CPU has been disabled by the guest operating system.

    OK - if I understand this message (in principle)

    But here's the thing. Why would my work machine virtual Windows 7 (64 bit) on WS8, WS9 on my PC or Fusion5 on my MacBook Air wife, but I get this error on my MacBookPro (A1286 - i7 - OSX Lion mountain)?

    Answers on a postcard, please...

    It seems that some versions of Check Point Full Disk Encryption have problems with Windows boot camp on Sandy Bridge MBP.  I suspect that you run into a similar problem.  You must contact the Control Point to see if they have a software update that will solve this problem.

  • your account has been disabled. Please contact your system administrator

    Recently, my hard drive crashed on my Toshiba A215 laptop.  I installed a brand new and ended up having order the Toshiba recovery disks.  I followed all the instructions along the way and ended up in the Panel to the screen.  After I clicked on the icon administrator, I got an error message saying something to the effect, "your account has been disabled.  Please contact your system administrator.  How can I get there and why he says this first?  The hard drive has nothing about it initially.  Can someone help me please?

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    This error has occurred with the use of Toshiba Recovery on a new hard drive software, contact Toshiba at the link above.

    It is their software/recovery process, not Microsoft.

    See you soon. Mick Murphy - Microsoft partner

  • Your account has been disabled. Please consult your system administrator

    Hello. I had problems with my computer because it says "your account has been disabled. Please consult your system administrator. "I can't possibly connect because it says that when I try to connect to the administrator account. Any help is appreciated, thanks.

    Try this:
    1. put your BIOS so that it uses the DVD drive as its primary boot device.
    2 start the computer with your Windows 7 repair CD.
    3. press a button if you are prompted to start from the DVD.
    4. Select 'PC Repair' in the menu.
    5. Select repair when prompted.
    6. When you are prompted, select System Restore.
    7. set Windows to a point before this problem occurred.
    8. Once completed, remove the CD before restarting the system.
    In step 2, you can also use the Windows 7 installation DVD. The subsequent steps are similar to those above.

    When you're done, plan ahead a little and create, then test a second admin account. It will take less than a minute, but you will save to never meet again in an awkward situation.

  • "Your account has been disabled. Please, SEE your system administrator.

    I accidentally disabled administrator. Now, when I start my computer, I get a message "your account has been disabled. Please, see your system administrator.

    I tried several Solution i.e. Safe mode and allowing via cmd, but none of them doesn't work. In my first time I had an opportunity to enter the password and identify you to windows live account. But now I don't get any option and see a message "your account has been disabled. Please, SEE your system administrator. Please help me what to do... I did not create a system restore too...

    Hi Mvrandazzo,

    You can read this article to learn more about the start of Windows including the safe mode settings.

    Start settings for Windows (including safe mode): http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode

    Thank you.

  • Cannot run the disk error check: check the disk has been disabled by a program use system restore.

    Title: How re - enable disk check after it has been disabled?

    I used a registry repair whichremoved all system restore and disabled of the disk check points. How do I re active chkdsk as he wants me to restore which I can't?

    I used the free registry repair recommended by c-net

    original title: re enable check disk

    Hello

    Follow the steps mentioned below and check if the problem persists.
    File system (CFS) Checker
    SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
    To run the System File Checker tool, follow these steps:
    (a) click Startand type cmd in the box start the search.
    (b) click on cmd in the list programs, and then click run as administrator.
    If you are prompted for an administrator password or a confirmation, type your password or click on continue
    (c) at the command prompt, the following line and then press ENTER:
    sfc/scannow
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
    http://support.Microsoft.com/kb/929833
     
    Hope this information helps.
  • Error: "your account has been disabled. Please, see your system administrator.

    Original title: accidentally disabled administrative account in windows XP

    When I was trying to figure out how to remove the login screen, I turned off accidentally my own admin account once I have restart my PC log on screen always there and says "your account has been disabled. see your system administrator. I don't have guest account on the computer and now I can't log on. I've tried safe mode, but could not = (.. What do I do?)

    using Windows XP Media Center Edition

    y at - it a way to get to the page of the log on screen computer management to enable administration account... Please help me.

    Hi NineFoxes,

    1. have you tried to connect to the same account in safe mode?
    2. do you think that user built-in in Safemode administrator account?
    3. what happens if you press Ctrl + Alt + Delete in SafeMode on the login screen?

    The built-in Administrator account cannot be disabled. We recommend that you check if there is a visible administrator in safe mode and login to the other user account admin user account.
    See disable or enable a user account

    Please provide us with more details, so that we can better help you.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Want to 17j-111-sl: recovery failed - your account has been disabled. Please contact your system administrator-

    Hello world

    I really hope you can help me because I'm running out of option...

    First of all, sorry for all the mistakes possible, I'll do, English is not my first language.

    My Hp envy 17-j111sl gave me hard times, crashing while playing the game online using firefox playerwith unity3d.

    Although I have day all, I had another BSOD while playing.

    In addition, the laptop is drammatically slow at startup... I mean it took 16-20 minutes to boot successfully.

    For this reason, I tried to restore using HP Recovery Manager to restore the laptop computer and the operating system.

    The process did not went well. I was a report that said "detect an error in the PININST_BBV" and "critical error condition has been detected to BBV1."

    At this point, I had to restart the laptopt, but I can not connect because "my account has been disabled. Please contact administrator. There is no one else on the laptop, just me, the administrator. I set a password when I used the laptop for the first time, but now he don't ask me the password. I just can not simply open a session, with no other options.

    Unfortunately, I don't have the recovery disc, so I checked on the website if they were available, but nothing...

    If I press "ESC" at the beginning, then click on "recovery" it always does the same thing... I click on "Administrator" and the message "your account has been disapled".

    The laptop was supplied with W8.1

    Please, clues? I'm really worried

    see you soon

    Create 8.1 Windows Installer dvd or usb with the free download of Microsoft. Demarrer start from this to install Windows, and then use the drivers of your Support at HP page.

    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

    Or call the HP Support to order recovery media & I hope they will work.

    If you live in the United States / CA, coordinated HP here.
  • folder has been changed to protected files operating system due to viruses attached

    Dear Sir

    I am using windows 2000 server and the attached system by a virus, all the hiden folder get protected operating system files. If you know the answer please reply me as soon as possible

    concerning

    Nirmal

    Hello

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

    http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads/

  • Automatic shutdown of the virtual machines in the Update Manager

    Is it possible to automatically stop the virtual machines as part of the Update Manager?  We have our virtual machines configured for auto power off/start with the host.  But when we apply a lot of patching ESX using the Update Manager, he waits for us to stop manually before putting the host in maintenance mode.

    Any way to automate that? Thank you!

    But when we apply a lot of patching ESX using the Update Manager, he waits for us to stop manually before putting the host in maintenance mode.

    Lol WHA each fails to accomplish is ESX is an enterprise product, it must be used with vMotion.  If the Update Manager is designed to make this easy and pain free, so if you have the shared storage, your VM will migrate to another host, maintenance is done, and the virtual machine back.

    ESX is essentially a hands on environment.  I know everyone can't afford a SAN, but ESX caters to these large enterprise systems that do not have SAN.

    By making a patch, so we are now toward the Windows stand alone everyday server where you have done EACH server, or do it manually power off / closure of EACH virtual machine is EVEN easier to do this 1 by 1 on EACH physical host.

    Consider so it cannot be the best option, it isn't that hard to select ALL VM under tension and click "shut down guest.  Besides that if you plan for a breakdown, you can stop the VM remotely (if windows) by using a shutdown script.

    There are a lot of options to do this, but there is no stopping the VM before update, you must do it manually.

  • Help! My Apple ID has been disabled and I am out of the country!

    Hello, I had Apple products for years, and for the first time, I got an alert saying, ' your ID Apple has been disabled ' whenever I try to update my applications. I changed my password twice. I looked for the online support for Apple, but apparently it is not available now. I am currently in El Salvador, and I'm not a Spanish speaker fluent, so I can't turn to their support line for help. WHAT should I do? I am frustrated beyond! AH!

    Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.  Then sign out of the iTunes Store and log in. (for applications not updated).

    Also try by going to settings > general > Restrictions > and make sure that iTunes Store, Apps install, delete the Apps and In - App purchases are all under the section allow. Try to install again.

    Also see this article for possible clues:

    If your identifier Apple is locked - Apple supports

    Here is a link to Google Translate. I am fluent in Spanish (my mother tongue) and it does a reasonable, not great job (I have to change some of them subsequently). Maybe the link will help you with a few words if you need local help. Good luck.

    https://translate.Google.com/?hl=en & Tab = WT

  • Windows xp media sharing has been disabled because a Windows setting required or a component has changed. For any additional help, click Help on the Web.

    Windows xp. I get this message when I try to share the media in windows media player 11 "sharing multimedia files has been disabled because a Windows setting or a required component has changed. For additional assistance, click Web Help. "I can't turn on windows media sharing and my xbox360 appears as shared, but somehow will turn off media sharing. There is an accelerated procedure to solve the problem that I have received this procedure by phone by microsoft support earlier. They require now $80 to give me the answer.

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-pictures/media-sharing-has-been-turned-off-because-a/6bf3851e-fc7e-E011-9b4b-68b599b31bf5

    It will be useful.

  • Reinstalled LR 5.7.1. Now can't access the catalogs and develop the module has been disabled. [was: Please help.]

    I don't want to upgrade to CC LR6.  I have re-uploaded LR 5.7.1 last night, and now I can't have hundreds of my photos.  In addition, my develop module has been disabled.  How can I have access to all my catalogs and don't use NO of CC?

    Hi Pamelaa,

    Go to the location where the Lightroom Catalog is stored and try the most recent catalog.

    Also in Lightroom, go to file > open recent item and see if you have any other catalog here.

    And for the disabled development module, please see: module development disabled

    Let me know if it helps.

    Kind regards

    Tanuj

  • The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation.

    The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation. I can't do this because even when you type the parental email address in the password recovery, it does not recognize because because it is inactive. I need a Windows Live technician to reactivate the account and I don't know if I should put the email address of the account here for security reasons. My other question is also if you can't reactivate can you switch parental permissions to another account.

    -Thanks, Michael

    Hello

    What version of the Windows operating system is installed on your computer?

    I suggest you to refer to the following article in the Xbox and check if it helps.

    Xbox LIVE connection issues:

    http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

    If the steps in the section of the Xbox did not help, then it would be better to post the same question in the Windows Live ID portal and forum Xbox to get help. We have a dedicated team to help you with questions of this type.

    Windows Live ID Portal: http://www.windowslivehelp.com/product.aspx?ProductID=10

    Forums Xbox: http://forums.xbox.com/

    Hope the information is useful.

Maybe you are looking for

  • Satellite P105 (PSPA6A-02N021) - need to display drivers Windows 7

    Hi all I'm desperately looking for Windows 7 Ultimate 32 bit video drivers appropriate for the video chipset 7900GTX on my Satellite P105 (PSPA6A-02N021). The drivers I installed the work in terms of resolution, but the video performance is about 1/4

  • Question about iPhone photo

    How can I change the picture that appears as my ID when I send a text? I have it on my desk, but can't see a way to do the same thing on my phone. Thank you!

  • The attempt to update Windows to install Reaktek Audio drivers

    I have two HP Windows XP SP3 PC that for some time, I could not get Windows Update to install the Realtek audio driver material it is recommended to be installed.  It gets to a point, then asks in a specific location locate a file.  Of course, I don'

  • Horizontal lines appear in the acquisition of grab after awhile

    Hello everyone, my system is using 4 cameras. This system worked for about 3 years and never had a problem with that. But now, when I start my process for less than an hour, I begin to see horizontal lines in my image acquisition. Even when I close a

  • User accounts does not

    My secondary accounts are not able to access.  The administrator account works fine.  When I clicked on secondary accounts, nothing happens.