Help to install the update of security for Internet Explorer KB972260!

Similar Questions

• Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

  I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

  Alan McC
  Do you have other accounts of users on this PC?  If you install this update from the main account?

  You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
  If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install the update of security for Windows XP (KB2476490) get error Code: 0 x 80070008

  Help!  I have Windows XP Edition version 2002 SP3 family.  I tried to install the update of security for weeks and get the following message:

  Cannot install get a security update for Windows XP (KB2476490) error Code: 0 x 80070008.   It is said it is downloaded on my PC but have been unable to find it or fix it.  Any help would be really appreciated.

  Unable to upgrade operating system at this time... no money.     Thank you!

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/836941

  Hope this information is useful.

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• Encountered the error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198)

  I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).

  I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.

  Ran the update without any firewall or AV program running and still received the same error.

  AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.

  Hi a93svtf,

  This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.

  Step 1: Run the fixit available in the article below

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

  Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Now, try to install the update

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A__

  I try to install the update of security for Microsoft Office System 2007 (KB972581), but if failed and I get the error code Code 57A

  I have install the 2007 Microsoft Office Suite Service Pack 2

  I bet that if you check the size of the file that has been downloaded it will be probably very small, indicating that it was not downloaded correctly.

  I don't think you have another computer at hand, or a friend with a USB key which may be able to download and copy it for you?  Maybe burn it to a CD or something.

  I could download it and save it to my desktop so I am confident that it is not a problem with the link itself or the file is available for download with success.

  I know this isn't a very good suggestion, but the only other option would be to challenge support and see if a technician can take control of your machine and see if they can solve the problem of internet explore.

  If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Cannot install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173)

  I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173).

  According to Microsoft Update, the error code is 0 x 643.

  I tried to install the update during a clean boot without result.

  Here is the log: https://skydrive.live.com/redir?resid=DDC6388AB2460543! 117

  Hello

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I would say you can do clean boot and install the update.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 3
  I suggest you to download and install the update from the Download Center.

  RTM of Microsoft Visual C++ 2010 redistributable MFC security update
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21576

  Method 4
  I suggest you try the steps from the following link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Update Windows guard invites me to install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) after I have already installed.

  Update Windows guard invites me to install the update of security for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) after I have already installed.

  Hello

  Thanks for posting in answers.microsoft.com

  So that we can fix that Mr is that we do a clean boot using msconfig

  1. Click Start, click Run, and type "msconfig".
  2. In msconfig go to services and hide all microsoft services, once's done it to disable all other services
  3. in msconfig again go to the Startup tab and disable all startup programs
  4. Restart the computer anddo updates

• Cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100)

  Original title: update KB2792100

  My computer has been tyrying updated Cumulative Seci = security update for Internet Explorer 9 for windows vista for over a month now and it says it fails every time.  Any ideas?

  Hi Jeanlavanway,

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems you cannot install update Cumulative security for Internet Explorer 9 under Windows Vista (KB2792100).

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you solve the problem, I would appreciate if you could answer the following question:

  1. you receive an error code or message?

  2 is the issue specific to some or all of the updates?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  Please follow the methods and mark the question below:

  Method 1:

  Follow the steps in the link below.

   

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:

  http://support.Microsoft.com/kb/2509997

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  I suggest you to install updates and check manually.

  MS13-009: for Internet Explorer Cumulative security update: February 12, 2013:

  http://support.Microsoft.com/kb/2792100

   

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2792100):

  http://www.Microsoft.com/en-in/Download/details.aspx?ID=36601

   

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

   

• The x 64-based update cumulative security for Internet Explorer 9 for Windows Vista for details of error the installation of systems (KB2761465) failed: 8007371 C Code

  Error message below Re: I got the cumulative update for IE 9-64 - bit to fail repeatedly.  The error code is listed below.
  How much of a problem is the following and, if serious, how can I get the system to install this update?  I'm running Vista 64 bit and it is patched to date - with the exception of this one.

  Update cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465) installation failed

  Error details: Code C 8007371
  Help and Support: http://support.microsoft.com

  Hello

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems that you have found a 8007371 C error code while trying to install update Cumulative security for Internet Explorer 9 for Windows Vista for x 64-based systems (KB2761465).

  I understand the inconvenience you encountered. I will certainly help you with this issue.

  I suggest you to refer to the advice given by Karena R on June 10, 2010 and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-8007371c-when-trying-to-install-Windows/7a69c389-d4d9-419A-B71B-33ce3b5348f6

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  For more information, visit the following link and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully. 8007371 C error code. Windows Vista Edition Home Premium Service Pack 2

  Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully.

  Other updates DO not seem to be successful.

  Error code is 8007371 C.

  How can I get this update successfully.

  Windows Vista Home Premium Service Pack 2, 64-bit system.

  Thank you

  Hello

  You can view these methods:

  Method 1: Temporarily disable the security software

  I suggest you to disable temporarily any them program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2: Reset the Windows Update components

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.
  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  Method 3: Clean boot

  I suggest to clean boot and try to install the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Once you make these methods try to install the update and check if it works.

  See the following links:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/20fa3032-Cdc6-4FF5-aea4-fd31a65e883d/

  It will be useful.

• Get the error code 646 when trying to install the update of security for Microsoft Works 9 (KB2431831) _

  I tried to install the update of security KB2431831 for Microsoft Works 9 several times.  Whenever he fails and give me "Update error code 646 Windows has encountered an unknown error.

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/21092c30-da71-4b7c-B242-1b32b28242bc >

• I can't log on windows 7 as an Aministrator user after installing the update of security for windows 7 KB2286198.

  When I connect windows as Aministrator, error massage "service user profile Service has no logon. User profile cannot loaded bo"appear. I'm only allow Windows to logon as a Standard user. Started as a Aminstrator I need to restore my computer (only in safe mode) at a time before installing the KB2286198 update. How to open a windows 7 mormally Admin user session after installing the update of security KB2286198?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install the update of security for Windows XP (KB982665)

  Original title: security update/install failures

  Siena is a re-post using the appropriate format: when I check for Microsoft updates I hit the express tab and most of the time I get the message 'install (s)' didn't like in whne I tried to download and install the 'a security update for Windows XP (KB982665)."  It is the rule, not the exception.  What should I do, please?  Thank you!

  Hi ubancosr,

  Try to download and install the update manually and check.

  Update security for Windows XP (KB982665)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5DDB5E34-F97A-47C6-96C8-BA2ED06CCB77&displaylang=en

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install the update of security for XP (973768 KB)

  I have problems to install the KB 973768 for Windows XP security update.  Does anyone have a solution to this problem?

  Hello

  1. What is the exact error that you receive when you try to install the security update?

  2 are all the other updates installed successfully?

  3. who is the antivirus program installed on your computer?

  Follow the steps mentioned below.

  Method 1: This problem occurs especially if there are conflicts between the Windows security update and the application program on your computer, mainly the antivirus program.

  Temporarily disable the antivirus program or the security on your computer and try to install the update.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  Step 1: If this does not help, put the computer in a clean boot state, and then run the update.  Follow the steps mentioned in the article mentioned below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353           
  Please note: after troubleshooting, be sure to start your computer in normal mode.

  Step 2: Try to install the update to windows manually in the clean boot state.
  Update security for Windows XP (KB973768)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=74