Help to "problem"-WRT54G, Linux, Unix and Windows ".

Similar Questions

• How to connect to remote oracle (10g and 11g) db Unix and window

  Hi all
  Hopefully an easy one.
  
  I have two Linux RH configured oracle databases.
  I use spfiles not ora.init files
  I want to maintain the cleanliness of my db and so restrict access remote ones with nicknames known so that if something goes wrong, I can follow who/what/how the newspaper.
  
  I want to enable users to connect both via call remote sqlplus to Unix and Windows.
  
  Users must be able to emit a sqlplus user/pwd@host command and be taken to a connection on the server.
  
  Q is:
  Do I need on my server of the client/Oracle/Oraclelite/or access point what?
  
  Q2. Should what command I similar to what I mentioned above?
  
  Q3. Should I tnsnames.ora on each host in the customer?
  
  Any help would be good on this.

  Hi user633084!

  the minimum requirement is that you have installed Oracle Clienttools about all your customers. After that, you need to configure a tnsnames.ora on each client with the descriptors for each DB connection. The command to connect to the DB from the client is sqlplus username/password@sid.

  hope that helps

  your sincerely

• Satellite L40 - 14N: problem has been detected and windows has been shut down

  Help.

  My laptop worked perfectly well until my son used last night and went on various games.
  Since then when you turn it on, it is a blue screen that says: "a problem has been detected and windows has shut down to prevent damage to your computer.

  He said that he has downloaded something or added a new hardware or software.
  So, off it and tried.
  Have tried everything to make it work. tried to get into F8 and F12.

  Tried from the safe mode and the recovery disc tried following all the resulting instructions always blue screen.
  Not knowing what else to do. I have

  s he Knackared now?

  As I got the BSOD appears also after the use of the disk recovery and after a fresh install of the OS.
  Is this right?

  Unfortunately, buddy, but sounds more like a hardware problem as a problem related to sound.

  I would contact a technician for laptop and organize an audit of the material.

• "A problem has been detected and Windows has shut down to prevent damage to your computer"... * STOP: 0x0000007e (0x805c49b8, 0xf7a172b4, 0 x 80000003, 0xf7a16fb0)... blue screen

  Hello!

  For the life of me I can't figure out how to get my machine to boot successfully. Nothing changes when I choose Safe Mode, last known good Configuration, enable VGA Mode, booting, Directory Services Restore Mode or Debug Mode logging.

  It's very stressful, because I'm right smack dab in the Middle a semester at the College. I have most of what I currently need access to supported illuminates... but not quite all :( It is also very reassuring to be able to take care of the school of work away from the library of the University. Yesterday, my computer was working fine... I think that Windows has completed an update, if I can't remember now. As I woke up this morning, I was not able to boot all the way to Windows only once.

  My laptop is a HP Pavilion dv6000 running XP Media Center, and I have not installed new hardware since I bought the machine about 3 years ago.

  Here are more details, where they can help in the diagnosis of my problem:

  • ID of the system board: 30BB
  • Type of processor: Genuine Intel(r) CPU T2250
  • Processor speed: 1730 MHz
  • Total memory: 1024 MB
  • Video memory up to: 128 MB
  • BIOS version: F.06

  Here's the entire message to the blue screen:
  - - - - - - - - - - - - - - - - - - - -
  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000007E (0X805C49B8, 0XF7A172B4, 0 X 80000003, 0XF7A16FB0)
  - - - - - - - - - - - - - - - - - - - -

  I also learned to a blue screen that says something about "PAGE_FAULT_IN_NONPAGED_AREA". I think that this happens when I try to start safe mode.

  Also, I never did much with computer problems beyond what could be repaired with the restoration of the system... so not being is not able to boot at all me has to stop. Please, I beg you! Help me?!

  With great appreciation for your time,.
  Damaya

  Quick suggestion

  Some HP partition the hard drive. have you tried to type F11 or F12 during startup (before that he go to the option mode start screen)? It might take you for a HP recovery program in that partition (because windows don't be loading not to use that recovery)
  Good luck

• When I turn on the computer, the screen indicates "a problem has been detected and windows has shut down to prevent damage to your computer.

  Original title: when I turn on the computer.

  the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.

  Hi Cjdaniello,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• NB100 Linux - problems with Linux update and BIOS

  Toshiba NB100
  Memory 1 GB - Kinston - KTT667D2 / 1 G
  Ubuntu 8.04 - Ubuntu Netbook Remix - CD from Toshiba
  CD-rw/DVD-rw LG GE20 externel USB key
  Keyboard differences

  Hello

  I was very happy to buy my Toshiba netbook.

  First of all, I configured the system ready - to reach the time Ubuntu-desktop, the first and everything was fine. Then I browsed menus and soon found "Aktualisierungsverwaltung" in German - should be 'Updatemanagement' in English - and began. After that I got a slow system, no sound card and later downloaded bios-udate 1.6 does not work too.

  I bought the DVD LG (~75US/~60Eur) burner and restored with the Remix DVD Ubunto system. Who works well and takes about 10 minutes. I bought a Kingston memorymodule too and I've replaced the original one. The Kingston-modul works fine too.

  After that I had read the thread, that work of doesn´t-update BIOS after update Ubuntu I tried again and now I have a good job of BIOS 1.6.

  But I still 2 faullts:

  The ' | '. (vertical bar) is not as shown on the keyboard Fn + X - it is Fn + Alt +.<>

  The 151-update "package" still damage the system - I tried it for 2 times doing nothing but the restoration, of networking, and update.

  The new 1.06 driver sound that I found at Toshiba-Germany and France-Toshiba are dead links (404), the line will help Toshiba now resolve this problem since 2 weeks and don't call back.

  Any ideas?

  Read this link about the update of the bios and Linux updates

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40156&start=15&TSTART=0

  Try this link for the sound

  https://edge.Launchpad.NET/%7Ejouston-Huang/+archive/PPA/+files/NB100-sound_1.09_lpia.deb

  The keyboard on my link. is Fn + Alt + z. This is for the UK keyboard.
  Have you checked that your keyboard is correct for your country?

  System/preferences/keyboard.

  System/preferences/shortcuts keyboard

  Hope this helps

• Problem installing Real Player and Windows Media Player

  I go online and download real player and windows media player. When I try to install, I get a message that tells me that they can not install unless I'm onlline. I'm online. I click try again again and again and re download again and again. Whenever it is the same thing. Just does not recognize that I am online. What can I do?

  Hello

  1. what version of Windows are you using?
  2. What is the exact error message?
  3 did you changes in the computer before this problem?
  4. what version of Windows Media Player you are trying to install?
  I suggest you run the fix it from the following link, restart the computer, try to install a drive and check.
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

• You might not have permission (problem of the domain and Windows 7)

  I have a critical Windows Server 2012 area with 5 computers of customers, all Windows 7 Pro.

  One of the users has had his computer (laptop) off site this weekend and connected to a starbucks.  Upon return, he can connect is more and it is prompted with the following error: \\fileserver\Folder Redirection\username\Desktop is not accessible. You might not have permission to use this network resource ".

  So, here's the problem.  I can connect to any other user accounts on his laptop without a hitch.  His user name can be used to connect to other computers, even if the connection to a computer produces a logon error server is not available.

  I tried flushing dns, remove the laptop network and reconnect... but I am at a loss.

  Any suggestions?

  Hello JayGab,

  Microsoft Communities is for consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. Since your problems involves domain authentication, it would be better to post in TechNet for ITPros.
  Click the link here to transfer your question in the category Windows 7 ITPro on TechNet.

  They will be able to the best contribution to your number.

  Sincerely,

  Marilyn

• No problem for Verizon/Outlook and Windows 8?

  We have Verizon fios.  We bought a new computer which has Windows 7 preinstalled, it came with an offer to upgrade to Windows 8 for a discounted price.  The Verizon email has been visualized via MS Outlook and has worked just as well in the sending and receiving until the upgrade to Windows 8.  Now, when applying for a mail through Outlook, it tells me that it cannot find the server - this error pops up to try and send and trying to receive emails.  I looked online and I see the problem is the Verizon uses POP3 and Windows 8 does not work with POP3.  I'm no expert just someone who is very frustrated and on the point of go back to Windows 7.  If anyone has some insight on how to solve this problem - you'll save my mental health and my brain cells.

  It is true that the built-in Windows 8 Mail app is not compatible POP3 for now, however, you indicate that you are using Outlook.  What that is the version of Outlook that you are using should have no problem with connecting to a POP3 server.  Windows 8 himself doesn't know or doesn't care about messaging protocols.  It is entirely the e-mail client software that you use.

  Since I don't know anything about Verizon (I'm not in North America), I leave it to someone else to suggest details of connection appropriate for your services.

• problems with 5.01 and Windows 8

  Hello

  I've been having some problems with the 5.0.1 and Windows 8 and wanted to see if anyone knew these.

  1 aero glass does not work correctly. I originally had problems with Office 2013 and which was fixed by disabling hardware acceleration for office only

  2. problems with USB currencies when 3 USB is enabled. The custom of the machine is taken out of service and the machine locks up frequently. As a solution, I changed the virtual computer to use only USB 2.0

  Thank you!

  Aero has not been removed in the RTM and retail of Windows 8?  I thought it was.

• Disconnect Linux guests and Windows in Win7x64 host of sound

  I use a Dell OptiPlex 790 integrated with audio.

  Periodically a Windows prompt, or every time I try to use audio on Linux hosts, I get the "error opening audio device 0:  "A device ID has been used that is out of range of your system.  Sound will start disconnected. "

  (I don't have a control panel RealTek).

  On Win7x64 host:

  I downloaded and installed the audio driver of Dell (Realtek, ATI?).

  I disabled the ATI audio device high definition in the host and activated exclusive reading.  I also disabled the two microphones in sounds.

  Who took care of the issue of Windows and my Win7x64 guest comments can now read the audio data without disconnecting.

  However, the above has not set the same question on Linux.

  Under Linux, I went my Gnome settings, under his and turned off the microphones, closed the window settings of her Gnome and re-connected the audio device to the default sound in the virtual machine host.  That will allow me to hear the chirp in Linux system.  However, whenever I try to open the application of Gnome sound settings, or to say an audio app like Audacity, sound disconnects with the original error.

  There must be a solution out there.  Surely, after all these years people report these problems, some must have found an answer?

  Finally found the answer to my problem.  I have uninstalled the Realtek software and disabled audio all output devices.  Then I restarted and connected via USB a SoundBlaster X - fi Go! Adapter audio pro.  The software is installed on my host, rebooted it, and then reset all the guests computer virtual for the audio device by default.  Now, all of my guests, so Windows or Unix play sounds.

• Help with a printer HP Photosmart and Windows 7

  I have an old HP photosmart 1000 printer and try to install the driver for my Windows 7 operating system.  Previously, using HP Office informed me install HP 760Cse driver to print with Vista OS and it works very well.  This time however, with OS Win 7, I manually installed the HP 1000 driver and the 760Cse HP and the printer is still not functional.  Help, please!

  Hi leebc,

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print on your printer Photosmart 1000 using this driver. I would like to know if you have the same problem?

  

• Problem with Internet Explorer and Windows Update on a Windows XP new install

  I just do a fresh install of Windows XP home.  When I went to Internet Explorer (version 6), the program open, but then soon a Microsoft error message said that there was a problem and had to stop.  I also found that Windows Update when activated is back with a message "[error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying to display." The options provided below may help you solve the problem. "I installed XP on multiple computers and have never encountered this.  Can you help me?

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  Internet Explorer:

  http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us

  Support for IE: http://support.microsoft.com/ph/807 Support for Windows Internet Explore 6, 7, 8 and 9

  Help and support for Internet Explorer. Links to the service customer and technical solutions, downloads, updates, and responses to the major issues.

  EI answers Forum: http://answers.microsoft.com/en-us/ie/forum