Help with 2 buttons, 2 entertainment and 2 audio clips

Hey everybody,

On board, I just animated in After Effects so bear with me here... I'm on a DPS project help for a friend and it left me speechless.

I have a project to animate with 2 animations, 2 audio clips and 2 buttons. Let's call them Animation1 Audio1 and Button1. Animation2, Audio2 and Button2. I want to have the charge of the composition and wait for the user to click a button, the easy part. Now, I want to have Animation1 play with Audio1 when the user clicks Button1, but I don't want the other elements (Animation2 etc.) to play or be visible. Then vice versa when Button2 is clicked. I was able to get the elements of Button1 to work but then I still see items of Button2. The animations are sync'd to the audio files so they need to play in time with each other. I searched some tutorials on the web, but I'm probably not the right thing.

Any help is very appreciated.

RA

You can bind a callback with the 'complete' event function of the audio tag and you can toggle the display property key to the function call back from events.

IN the case of composition ready, add the code below

{sym.$("YourAudioElementId").bind ("ended", Function ()}

code to display the button here

});

Tags: Edge Animate

Similar Questions

  • Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried it several times redownloading. What sh

    Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried to re - download several times. What should I do? Here is a picture of what happens:CCFail.PNG

    See if the following can help:

    White screen

    https://forums.Adobe.com/thread/1249756

  • With the help of a button to load and unload the external SWF in AS3?

    How can I use a button to load and unload a sequence of external SWF files, as a Next button and previous?

    I don't know if it will work because apparently you are trying to load a swf AS1/2, but try

    change the line to be...

    _swfTempClip = MovieClip (event.target.content);

    If this does not work, then you will need to create _swfTempClip as a new MovieClip and add the event.target.content to this MovieClip using addChild().

  • help with framework button

    I have create a button (b1) can I double clicked and to "over" frame change color, so whene I'm above this button, I saw the color where I choose to "over" frame.

    I also have a (b2) button more and I want when I clicked on that the b1 button go to the color of the frame 'more' up to what I called the b2.

    any help with this?

    Thank you antony

    If b1 and b2 are movieclips and you label their mounts up and clicked with what is obvious, you can use something like:

    B1.onRelease = function() {}

    B2.gotoAndStop ("up");

    this.gotoAndStop ("clicked");

    };

    B2.onRelease = function() {}

    B1.gotoAndStop ("up");

    this.gotoAndStop ("clicked");

    };

  • Need help with Sprite´s. (Rectangles and circle)

    Hello!

    I kinda need help with a project. I m supposed to do a script that responds to a click and moves the circle of one rectangle to another.

    (Here's a picture)

    howtosprite.JPG

    So, what I want is: when I click on the blue rectangle to the right, the circle must move instantly in the rectangle on the right. And same thing on the opposite path.

    Thanks in advance!

    -Best regards,.

    Aleksandar "Dyxir" B.

    import flash.events.MouseEvent;

    leftRec.addEventListener (MouseEvent.CLICK, fCircle);
    rightRec.addEventListener (MouseEvent.CLICK, fCircle);

    function fCircle(evt:MouseEvent)
    {
    Circle.x = evt.currentTarget.x;
    Circle.y = evt.currentTarget.y;
    }

    Note: Point for all alignment: Center

  • Help with installation of Windows Mail and gmail! error message with Port: 143 and Code: 800ccc0e

    I need adjustment help my email on gmail to my windows live account.  Currently I have a local account of cable for my email and need to change to an e-mail account that will be permanent.   I can't seem to get Windows Mail (Vista) to accept my gmail or hotmail account.  I've finally set up the gmail and it gives me an error when searching for files.

    The error is:
    Account: imap.gmail.com
    Server: IMAP.gmail.com
    Username: (username)
    Protocol: IMAP
    Port: 143
    Secure (SSL): 0
    Code: 800ccc0e

    Hello

    ·         Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1:

    Step 1: Change the setting above

    Server: imap.gamil.com

    User name: user name

    TO

    Server: imap.gmail.com

    Username: * address email is removed from the privacy *

    Step 2:

    a. check that IMAP is enabled

    b. http://mail.google.com/support/bin/answer.py?hl=en&answer=77695

    c. check that your settings are correct:

    i. IMAP server is imap.gmail.com. If no joy, try Photoscape

    II. connection is your full email address, no username only.

    d. check if antivirus interferes. Disable check incoming mail antivirus.

    e. check if your ISP is blocking Gmail

    f. troubleshooting of IMAP

    http://mail.Google.com/support/bin/answer.py?hl=en&answer=78774

    Method 2: You can temporarily disable security software and check if the problem still persists.

    Disable the anti-virus software

     http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Make sure that you activate the software antivirus and other security programs.

    Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Let us know if that helps.

  • Help with transparent buttons on images

    I have photos of a piece of equipment and load images to slides in Captivate 3. Then using the jump to feature to do move from slide to slide, simulating a button is pushed and then what a person would see.

    The problem is that if they don't click on the button show advance automatically to the next slide, which is usually not the slide that they should be addressed to. do you know an easy fix for this?

    Thank you advance!

    Hi again of Serena

    Check if there is perhaps a click box already on the slide that covers the region. This could be the case if you have imported PowerPoint. If so, you need to remove this box click object. Basically, a click outside the click box should be ignored. This is why I think that you have a larger surface area behind the smallest.

    See you soon... Rick

  • Problem with playing video games, DVD and CD audio with windows Vista.

    I had a problem to read these types of discs with my hard drive. It does not recognize that there is a disc at all. This ONLY happens with new discs I get, for example by trying to install a new video game or download a new album that I just got. If I want to play a previously installed game I put game disk in and it works perfectly fine. This only happens with new games that I have not yet installed. E.g. I want to play starcraft, previously installed. I put the cd in starcraft and the game appears as usual. But if I want to install starcraft II nothing happens when I put StarCraft II in the disk drive, even if I go to my computer and double click on your drive, it just opens the CD door and asks to put a disc in when we're already here.

    I tried MR. Fix and it recognizes that there is a problem but is unable to repair. I tried to uninstall the disk driver and not the fixed not restart, but who either.

    Hello

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
    and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    A CD/DVD cleaner might help.

    -----------------------------------

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Need help with my Toshiba remote control and receiver for Qosmio G30 161

    Hi all

    I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

    I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

    Also to confirm that I'm under addition of Windows XP MCE.

    Anthony Worlock

    Hello

    This remote will work, if you use it without any special drivers and special software, only in the Media Center.

    But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

    Please try this tool and check if it works.

    By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

    Welcome them

  • Help with a printer HP Photosmart and Windows 7

    I have an old HP photosmart 1000 printer and try to install the driver for my Windows 7 operating system.  Previously, using HP Office informed me install HP 760Cse driver to print with Vista OS and it works very well.  This time however, with OS Win 7, I manually installed the HP 1000 driver and the 760Cse HP and the printer is still not functional.  Help, please!

    Hi leebc,

    Follow the instructions below.

    1. open devices and printer

    2. click on add a printer

    3. click Add a local printer

    4. from the use existing port, select the USB option and then click Next

    5. click the button of Windows Update to get all the support window 7 drivers updated

    6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

    7. follow the remaining instructions to complete the installation.

    Once you have the printer added 990c make sure it is the default printer, and then try to print on your printer Photosmart 1000 using this driver. I would like to know if you have the same problem?

  • Need help with the button mute on my helmet XL-3000 of Microsoft Chat, please!

    Hi all!  Hope everyone is having a good TGIF!  If you use my helmet even, I need help understanding the region button mute in the middle of the rope.  The red light is on or off?  I suppose that if I hit the curve button with the microphone on this subject, and the red light, I'm turn off my mike?

    I did some tests with others on the phone calls.  Sometimes, some other hear me, sometimes they do not have.  BUT I NEVER HEAR THEM!  FOR MY WORK, IT IS IMPERATIVE THAT I MAKE CALLS TO OTHERS!  HELP PLZ!  Thank you very much and have a great wkend!

    Hello
     
    Please follow the links below to troubleshoot the computer.
     
    Method 1
     
    Connect one microphone, music player or other audio device to your computer

    Method 2

    Step 1

    Troubleshooting: headsets

    Step 2

    Open the troubleshooting of Audio recording

    Method 3

    How to adjust the microphone volume

    a. click Start, type mmsys.cpl in the search box and press ENTER.
    b.
    in the sound dialog box, click the recording tab.
    c. click Microphone, and then click Properties.
    Note Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
    d. the Microphone Properties dialog box, click the custom tab.
    e. select or clear the box amp Microphone.
    f. click the levels tab.
    g. set the volume to the desired level, and then click OK.
    h. click OK to close the sound dialog box.
     
    How to adjust the setting of the voice
     
    a. start the game.
    b. connect to LIVE (the Guide).
    c. click personal settings.
    d. click on voice.
    e. make sure that the recording volume level indicator records at a bar when you talk.
    f. click done.

    If you are still facing problems then, I would say that you contact support for Microsoft hardware for more direct intervention.


    I hope this helps.

     
  • Need help with Windows Live Movie Maker and DVD Maker

    I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

    Thank you.

    /PR

    I have worked with Windows Live Movie Maker to cut a continuous piece of video footage into separate clips (these are dance performances by dancers of different about 13)... then once they were divided into 13 clips separated, I then cut them at the beginning and at the end of each clip (performance) and then used legends at the beginning of each clip with name of the dancer.  I also added a title at the beginning of the film page, and I added at the end of the credits.  Then I clicked on save the movie and had to wait an hour or more... Finally, when this was done, I opened Windows DVD Maker and clicked on add items... went to my file and put my film recorded in the creation of DVD.  I used also changed the Menu template to that for shows (it is red and black and has lights and cameras as a staging.  I thought everything was going along fine until I played the disc engraved on my Smart TV DVD player.  For some reason when I click on the stages (or chapters) to see the performance under this button, it starts to play the dvd in a few seconds or a few minutes in some cases in the performance... I've lost countless blank DVDs not to mention hours and hours of time... and I'm so frustrated... I'm ready to SCREEEAAMMM!  Also some of the performances were not even under one of the buttons or frames... in other words you could not use the arrow keys to locate some of them to click it and find out.  Yet, when I went back and pressed the 'Play' button, I could fast forward through the entire movie and find performances that seem to be missing the scenes/buttons.  Any help or advice before I blow a bridge! ???

    Thank you.

    /PR

    ===============================================
    First of all a question... did you you save the project in a video such as format
    . WMV or. MP4? Or have you just of WLMP project folder?

    I suspect that DVD Maker is to see your movie in one file
    and he has no idea where are your scenes. More than likely it is
    creation of scenes on his own in arbitrary places.

    In order for DVD Maker correctly, identify individual scenes
    each stage must be registered as an individual video clip, then
    the collection of video clips can be imported and each of them must
    become an individual scene.  DVD Maker is supposed to accept
    up to 18 scenes.

    Just an experience you can import your new original
    video clips in DVD Maker and see if it works properly. If
    It does what you want... change and re-record your clips one video
    both will be the fix.

    Good luck...

  • Help with coding button

    I do dress up games in ActionScript 2 and I have a problem.

    I want to find a button all elements of movieclip with, say, "shirt" in the name of the Instance and move them to the frame 2.  I know how to do this with a single element, (on (release) {}

    _root.shirt1.gotoAndStop (1);

    }

    and on the previous games, I just copied and pasted that several dozen times for each item.  However, on this game, I try to reduce code and learned how to use

    for (var i: String in _root) {}

    If (i.IndexOf ("_drag") >-1) {}

    _root [i] .onPress = function() {}

    (put in the code)

    (put the closing} s)

    on the stage to make items drag and snap into place.  I learned that this code does not have the buttons, which need static commands, I think?  I'm still very novice.

    Any help would be appreciated!

    You must remove all code objects.  so, no matter what button has code attached there an instance name (for example, btn) so you can use:

    btn.onRelease = function() {}

    for (var i: String in _root) {}

    If (i.IndexOf ("shirt") >-1) {}

    _root [i] .gotoAndStop (2);

    }

    }

    };

    }

  • Help with active buttons

    I'm looking for a way toggle all buttons in a swf file. I found this search here, but I do not understand and am looking for some in many ways, as shown.

    http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?forumid=15 & catid = 288 & ThreadID = 1240137 & highlight_key = y & keyword1 = active

    I'm playing with having things to load in what I call 'windows' and when you close a window, basically he just collapses the .swf. The problem I have is that the cursor reacts to roll overs and I can still rollover buttons in the same swf if its collapsed. To see this prob go to:
    www.Custom-Differentials.com

    Open the Gallery, then drag the Gallery until the middle of the screen, close the Gallery, then move the mouse around the outside of the "title bar" and watch the change in mouse colors even if there is nothing there. I put a trace in working capital management, so I know the buttons that are the cause. I would like to just a disable a broad view, all of the buttons, then the window is closed.

    Thanks in advance for any help.

    Well, you really want to disable each button/movieclip in your swf file. But if you did you can use:

  • Help with Radio buttons in form

    Hello. I inherited a site that has a simple form. Asked me to change the form of 4 radio buttons added to collect the consumer satisfaction with the content of the Web site. I added radio buttons using Dreamweaver MX, however, they do not work as I planned to do. I was under the impression that option buttons did not allow the user to select several options because when the user has selected a different option, the first option is deselected. My form is currently allowing all four options to choose from at the same time. The code for the form is below. I changed the @ in the email address of the form to avoid possible spam. Any help would be greatly appreciated.

    Looks like you need to change the name = the same on each radio button, if they all have the same name, you can go only one. Then, click the shape in the behaviors panel and don't forget that the name of the radio button is the insertion in the appropriate column db.

Maybe you are looking for

  • How can I change the video player by default QuickTime for VLC?

    QuickTime is pretty useless for a broad category of video files. It's a waste of time having to specify which application I want to use to open a video file each time (I understand how to do this, but I try to avoid having to do each time.)

  • Why not El Capitan download on my Mac?

    I'm running OS X Yosemite Version 10.10.5 and tried to download El Capitan Verision 10.11.4, but it will not download. When I click on the "Download" button, it stays on 'Download' for a few seconds and then he shot of it and will not download. It se

  • creating a cross-plot of two independent variables

    Hello, I have two tracks of data measured during the same race acqisition, pressure and flow. I can trace them both in the same graph with time on the x-axis. What seems to me to be able to do is to draw on the same chart in a way where I have feeds

  • R5 of Radeon graphics driver (VGA)

    Hello on my computer hp laptop 15-g049au (K5B45PA) graphics driver is AMD quad-core a8-6410 apu with Radeon R5 Yes, where I can install this on my Windows 7 32-bit vga driver for this reason funcation works do not (fn + f2) and the brightness of the

  • Printer with Yosemite problem.

    I have a Macbook and run Maverick.  My HP Laserjet 3050 worked fine - never any problems.  This morning I upgraded to Yosemite and is not printing almost nothing.  For example, I'll print one of my mails to mac, but then I try to print an email in ma