Help with a printer HP Photosmart and Windows 7

Similar Questions

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Photosmart: Called tech support for help with my printer and got a sales pitch

  I called HP customer service today to get help with my wireless printer because it won't print wireless. What I got was a sales pitch to buy a value of $450 of virus protection! So very disappointed!

  Hello
  
  Thank you for using the HP forum.

  How can we help with your wireless?

  Have you tried the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• SMEAD objects viewable 3d labelling system will not print with a printer HP Photosmart C309gm

  I bought the system of labelling SMEAD objects viewable 3d. When I'm done typing in my labels and press the "print" button the program closes and will not print. I have a printer/HP Photosmart premium C309g-m. Help is appreciated.

  Have you seen the compatibility options shown, Win7 help & support

  According to SMEAD, it comes to the list of versions compatible win

  Microsoft Windows 2000 with Service Pack (SP) 4,
  Windows XP with SP2 or later
  Windows Server 2003 with SP1,
  Windows Vista

• Problems scanning with c6150 all in one and Windows 8

  I have a new touchsmart from HP running Windows 8. I have an old printer c6150 all in one. I downloaded and installed the latest software and drivers for 64-bit Windows 8.

  I feel, copy and fax without problems. But when I try to scan, it freezes. It starts to scan and then just stops responding. I have to use Task Manager to quit the program. I tried the scan doctor and he says that there is a driver problem and it cannot communicate with the printer.

  Help, please.

  I solved the problem. The USB cable from the printer was not quite long enough to reach the back of my all in one computer, so I bought a USB extension cable. That works fine for normal printing, but apparently only works well for scanning.

  Once I connected the printer directly to the USB port on the computer, the scan function worked normally.

  Emilio

• Need help with the printer problem.

  * - Original title - help

  Why can I send pictures via bluetooth for continuous printer asking me a code years samsung knows anything about can any 1 hepl

  Hi Patrick,

  1. What is the brand and model of the printer?

  2. What is the exact message that you get when trying to print?

  3. don't you make changes to the computer and the printer prior to this problem?

  We can refer to this article and check if that helps.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Response with the State of the question and we will be happy to offer you our help.

• HP officejet 8600 not find network printer (macbook pro and windows 7)

  I have installed the new software, set up the printer on the wireless and I can see the printer on my Airport Extreme, but I'm not during the game to the top (I can print via USB). I pulled out of Installer and is went on the forums and found a similar problem with an OfficeJet 6700. I followed the instructions given to the downloaded drivers from Apple. I could then see the printer online... briefly. I even hit print, got 12% in the printing process, but it died on me (not printed). I restarted/rebooted everything (printer, macbook pro, computer windows laptop and router) and no dice. I added the printer manually on the mac using the IP address, and I can see it. It gives me even a Green State, but when I try to print a document, the State of the printer is busy and turn until I have delete the print queue. I don't see anything when I'm in the box ' print and scan "to the default setting, that I should be able to.

  Any ideas out there?

  I thought of it. I have a router using a double NAT and I had put the printer on the network of comments, as almost all of my devices are out there, but comments network does not allow access to other devices, only allow access to the internet. Installs everything other than mobile devices at "home"network and everything worked."

  Thanks for the help!

• XP Home SP2; Currently installed with IE8, Live Essentials, MSE, and Windows Defender...

  I have reistalled my XP Home of authentic CDs and subsequently I was only able to download Windows updates. However, after I received your response referring to download related problem with IE8, MSE Live Essentials. Well, I downloaded MSE, but it cannot download the updates because it fails to update due to internet connection failure. I also downloaded Windows defender, but it says "the program cannot check the updates of definitions. It has an error code 0 x 80004002. Even after trobleshooting with 'Fix' and 'fix the problem with Microsoft Windows Update' he says it doesn't, 'window could not help solve the problem. Finally, I'm not yet able to download Windows updates. I get the following message, "the website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem, etc., etc... Given that I'm unable to download Windows updates and therefore SP3, MSE will never be installed. So please help.

  Try this {deleted} and let me know if no effect

  What he does is a reset of the stuff that makes your windows update also works, you don't need to do the updates of windows to get SP3 the link below will take you to this http://www.microsoft.com/en-us/download/details.aspx?id=24

• HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

  I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
  I get audio on my speakers ONLY and not the headset.
  I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
  no luck - same behavior.
  
  The only thing that worked was the IDT driver installation and Windows device driver high definition.
  The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).
  
  An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.
  
  I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.
  
  Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)
  
  I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.
  
  Any help would be appreciated. IF not - it is a problem that a person should study.
  

  Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

  I thought about it.

  BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

  V80.05 - did not work properly with this Version of Bios.

  Thank you HP very useful site if you take the time to browse through all the updates.

• Printer Dell P513w and Windows 7

  I have a Dell P513w printer and (Chinese) Windows 7 Ultimate. They worked well with the driver Dell SW, but after that my wife has installed some anti-virus (?) called "360-degree" or something like that, the printer no longer exists. This is a security setting? I tried to reinstall the Dell driver package, but it cannot simply find the printer on the network.

  The P513w is one of those all-in-one printers with the wireless network card, and just yesterday, I downloaded the drivers. They seem to settle down without error, it simply does.

  No, it is not anywhere, which was strange. Then I realized that the system is 64-bit, so I looked for (and found) a 64 bit version of the driver, and now it works. What I don't understand is why the pilot fails not high and strong, that you do not miss such an obvious clue.

  Thank you for taking the time, BearPup, I appreciate it!

• Dell AIO Printer 962 Photo and Windows 7 32 bit

  OK, so I thought naively: "you had Windows XPII SP III for several years.  Time to update. "I bought a program of 32-bit Windows 7 for my old Dell Dimension E520.   Thank God I have the Windows 7 Upgrade Advisor printed report that told me what to expect with a certain number of programs, including Dell AIO Printer 962 Photo, Jasc Paint Shop Photo Album, WordPerfect12 and a few others wouldn't work, or have problems with Windows 7.    First of all the Dell AIO Printer 962 Photo.  Despite the fact I've updated drivers, and the small list of control on the screen tells me it is read to use, I get a message saying something like "your computer is unable to communicate with your printer.  He then advises me to unplug/re-plug the USB power cord cord, restart the computer, etc..  I did all that, nothing.  Second, the software I bought Corel, WordPerfectX6.  The thing installs OK.  Then I try to run it and I get a message stating: "WordPerfectX6 has stopped working" No. S_t!  I tried to uninstall and reinstall and nothing.  I had a call to the toll-free line 1-taking in charge, but I swear to you that I am about to return the thing and just do with NotePad.  What is essential now is Dell
  Photo AIO Printer 962.  Someone at - he had THIS problem and found a solution?  I mention the other problem where the two events are related.   And since I use Windows7/32-bit, a Microsoft Product, I take a shot that maybe someone can have a cure!   Thanks in advance for any advice. Series-poet: (o)
  

  Dell, web site, there is no driver Windows 7 not listed for your printer on the printer control, so everything you download may not work. The thing nearest Dell listed are Vista drivers, you can try the 32 bit version.

  Cut first download auto driver from windows update.

  Start right click System computer/properties/Advanced/settings/device installation settings/tick won't let me choose and never install win update and save the changes then install driver.

• cartridge in the slot on the left is not intended to be used with this printer. Remove and replace

  Hello

  After using my printer on a regular basis and without any problem, I suddenly had this coming message: "cartridge in the slot on the left is not intended for use in this printer. Remove and replace.

  I have a computer that is running Windows 7, 64-bit and the cartridges that I use are all genuine HP cartridges, black and tricolor cartridges are XL.

  What surprises me the most, is that the left cartridge is not empty, I without touching it, there was no jam paper, or any other poor behaviour of the printer. It happened just in the middle of printing, the printer just finished a job, and was about to start the second in the queue. Maybe this detail can help or it's just a coincidence...

  Thank you for your help

  Tonphilou

  Hello

  Please follow the steps in the document below.

  http://support.HP.com/us-en/document/c00042821

• I try to print the task and windows calendar notes

  can you print the task pane and windows calendar notes

  Hello kevcokev2,

  Thanks for posting on the Microsoft answers Forum.

  Have you tried option Print Screen on your keyboard to print the task pane and notes?
  Who would print the entire area.  I don't see an option to print just the tasks or notes.

  Answer please come back and let us know.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• S10 - 3T with UNR Ubuntu 9.10 and Windows 7

  Hello!

  I installed UNR 9.10 on my S10 - 3T, however, when I tried to install Windows 7, the installation program does not have the 'readers' in my netbook. He asked the drivers.  I have provided the drivers supplied by the drive D and that I copied it to my flash drive, but it is not visible all the drivers.

  Now, I'm stuck with Ubuntu.  How can I install Windows on one operating system existing Ubunto? Or, how can I format it clean so that I can install it costs.

  Thank you

  rdamontz

  I started from a flash drive with Ubuntu as an operating system and deleted all partitions of my in my hard drive.  I have created a new and format it in NTFS.  When I installed Windows 7, he finds my hard drive and was able to do a fresh install.

  Ubuntu has messed with the boot loader that causes Windows does not see.

  I am now running Windows 7 Ultimate and Ubuntu UNR, but I used the WUBI Installer.

• Linux host freezes with 10.0.6 Workstation and Windows 7 comments

  Hello

  
  

  I am now quite desperate because it is really preventing me from doing my job.

  
  

  I deleted Windows and I installed a fresh Kubuntu 14.04.02 (LTS) with 64 bit under my desk. I also installed VMWare Workstation 10.0.6 to run my development machines. I am now having serious problems:

  
  

  Every now and then, my full host is the gel if I'm running a Windows 7 virtualized on my workstation. The mouse only moves very slow and all the windows are very (!) slow response. My CPU monitor list all 4 CPU to 100%. If I managed to open the monitor system (or top on the console), I can see that vmware-vmx and kwin burn most of my CPU resources. If I wait 10 seconds to a minute, the system becomes usable. Now CPU goes down to normal. But as soon as I start to move a window (any one), the thing is happening again.

  
  

  Symptoms in short:

  • HOST: Linux Kubuntu 14.04.02 (x 64) on Intel i5 CPU with 8 GB of RAM and running on SSD (ext4).
  • COMMENTS: Several Windows 7 (x 32) several software running. Assigned 1 CPU and 1 GB of RAM. It comes on several guest computers.
  • Every now and then, all my CPU taking nearly 100% 4. The host CPU is used by vmware-vmx and kwin (used above) processes. Sometimes after 15 minutes, sometimes directly after turning on the prompt. No idea on reason.
  • Host of mouse, Windows, and OS works very very slow.
  • Meanwhile, Windows 7 virtual machine is inactive! Energy saving or screen saver are all off!
  • If I manage to run Taskmanager guests, I don't see an action (sometimes TaskManager itself using 60% of CPU!). Looks to me that the host is down, not comments!
  • My host is running an SSD (256 GB).
  • VM log file does not show something during this phase.
  • VMware.log attached.

  
  

  What I tried:

  • I disabled 'Accelerate 3D' for all my virtual machines.
  • I have re-installed VMWare Tools on the guest computers.
  • I run VMWare workstation with vblank_mode = 0/usr/bin/vmware
  • I recreated the machine with less hardware as possible and recharged the .vmd.
  • I converted to virtual prior to the current format format disk image (VMWare asked me to the front step, I said 'yes').
  • I have inserted a separate network card (NIC) and disabled the network card that is embedded in the BIOS.
  • I disabled the onboard graphics in the BIOS and added a card NVIDIA GeForce 8400 PCIx16 (using NVIDIA binary drivers provided by Kubuntu).
  • I removed the CD-ROM of the virtual, Audio computer, diskettes and any unused material.
  • I have tried using cpulimit strangle vmware-vmx and kwin on my host, but without success. System remains unusable in this situation.

  No success at all.

  Is there anything else I can do to put my environment in a productive state? You can imagine that this always happens in the worst situations :-(

  Any ideas?

  Thank you!

  I found this page:

  Disqus - Arch Linux becomes insensitive to khugepaged

  It seems that this did the trick!

  I ran (as root):

  never echo >/sys/kernel/mm/transparent_hugepage/defrag

  madvise echo >/sys/kernel/mm/transparent_hugepage/defrag

  Since then, everything works fine. :-)