help with error 646

I use windows 7, my desktop acer computer said I have 3 important updates, but I try to download them each time gives me the error 646

can someone help me please

Thank you

Tip: Insert your Office CD in the Bay before the next attempt to install appropriate.

Tip: If no joy, see if you can download the "fullfile" version updates viahttp://www.microsoft.com/downloads/ orhttp://catalog.update.microsoft.com/ and then manually install / them.

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Tags: Windows

Similar Questions

  • Help with error message: "Windows Vista Home Premium product key you typed in is invalid for activation.

    Original title: help with error message... Please...!

    I use a desktop PC of HP Pavilion a6202.uk with Windows Vista Home Premium & Microsoft Office 2003.  When I am back from vacation & turned on my PC, my password was OK, but rather to raise Windows, I received the following message: "Windows Vista Home Premium product key you typed in is invalid for activation.  He then listed the following options: "access your computer with reduced functionality (this will allow you to buy a product online key)" or "Type a different product key" or "contact HP to help solve this problem."

    I have no idea what a product key is and don't have anything either in the type comes to connect as usual.  I can't access anything to be same to reduced functionality.  I can not type in a new product key because I did not.  I can not contact HP - phone number does not... !!

    I'm quite desperate, I travel docs to print and e-mail to answer and I don't have any idea what is happening.  Please can someone help with this not very IT clued-up DTP...!

    Moved from Vista programs Forum.

    You should have a sticker with the product key on your computer, on the bottom, or under the battery cover.  I try to type this key in and see if it accepts it.  If this isn't the case, you might not have an authentic version of Windows installed.

  • Help with error: "display driver stopped responding, but recovered."

    Hello

    First of all, my configuration is a Dell XPS 7100, Windows 7 Home Premium 64-bit, the Videocard Visiontek AMD Radeon HD 6850 w / 9.2.0.0 driver version.

    AMD Phenom II X 6 cpu.

    My problem is that when I try to play a game (more precisely: Minecraft, SimCity, World in Conflict, AOE3) under Windows, the screen freezes for 5 seconds then go black for 1 second then back to the top with an error message saying:

    Display driver stopped responding, but recovered

    Driver AMD display driver stopped responding and has successfully recovered.

    This started only after I upgraded my video card to an AMD HD 5670 to an AMD Radeon HD 6850 Visiontek, which, at the same time, I upgraded my power supply to a 500w unit as AMD recommends. After that that I've updated all my drivers, deleted and reinstalled the driver video and which did not help. I then searched in all the forums about this problem and found that it is more than likely a problem with Windows power management. So, I followed the instructions on the site to change the registry data to help with this. This did not work, the same problem at the same time. I then contacted AMD Support and fairly well, they told me that it is either the power supply or windows power management which was the cause of the crash.

    I am at a loss now, I know not what to do. I have not tried all the third-party programs to try to manage the power. But if someone has used one that works or has any ideas for me to try please let me know.

    Thank you very much!

    I found a solution that helps!

    Please make a backup of the registry before making any changes in it.

    When editing the registry go to:

    • HKEY_LOCAL_MACHINE
    • then the MATERIAL
    • then DEVICEMAP
    • then the VIDEO
    • in the 'VIDEO' file, there is an entry with the title: MaxObjectNumber - REG_DWORD
    • This has a value at the end that looks like 0 x 00000006 (6) or 0 x 00000005 (5)
    • Double-click MaxObjectNumber, and an edit box appears
    • put 0 in the given value, and then click OK.

    This will disable Windows GPU Timeout detection and recovery. That she has stopped crashing on me.  The only problem is that windows does not save it and it resets after that rebooting so it must be changed every time you start the computer.

    If anyone knows how to save the changes to the registry, I would be very grateful for your advice.

  • help with error 16820

    help with 16820 error trying to update acrobat

    Looks like you have the Acrobat.com (AIR) Office application installed.  This application is no longer supported.  I would suggest you uninstall and just use the web interface (http://acrobat.com) go ahead.

    Sorry for the inconvenience.

    -David

  • need help with error in Update window

    error 80096001 that is the message I get I can't update

    Hi SejB,
     
    Welcome to the Forum of answers Windows Vista.
     
    This problem may occur if one or more of the following conditions are met:

    • Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
    • Cryptographic services is set to disabled.
    • Other Windows files are corrupted or missing.
    • The timestamp signature or the certificate cannot be verified, or is incorrect.
    • The hidden attribute is set to the folder %windir%, or one of its subfolders.

    To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.
     
    Method 1: Rename the Edb.log file
     
    Rename the Edb.log file, and then try to install the program again. To rename the Edb.log file, follow these steps:

    1. Click Start, click run, type cmd in the Open box, and then OK.

      Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.

    2. At the command prompt, type the following command and press ENTER:

    Ren %systemroot%\system32\catroot2\Edb.log *.tst

    Method 2: Set Cryptographic on auto Services

    Define Cryptography on AutoServices and then try to install the program again. To set the cryptographic on AutoServices, follow these steps:

    1. Start the Administrative Tools utility in control Panel.
    2. Double-click Services.
    3. Click Cryptographic Services, and then click Properties.
    4. Click Automatic for Startup type, and then click Start.

    Method 3: Reregister DLL files that are associated with Cryptographic Services
     
    To register .dll files that are associated with Cryptographic Services, follow these steps:

    1. Click Start, click run, type cmd in the Open box, and then OK.

      Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

    2. At the command prompt, type the following commands and press ENTER after each command:

    regsvr32 /u softpub.dll
    regsvr32 /u wintrust.dll
    regsvr32 /u initpki.dll
    regsvr32 /u dssenh.dll
    regsvr32 /u rsaenh.dll
    regsvr32 /u gpkcsp.dll
    regsvr32 /u sccbase.dll
    regsvr32 /u slbcsp.dll
    regsvr32 /u mssip32.dll
    regsvr32 /u cryptdlg.dll
    output

    Note If you are prompted, click OK .

    Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

    1. Restart your computer.
    2. Click Start, click run, type cmd in the Open box, and then click OK.
    3. At the command prompt, type the following commands and press ENTER after each command:

    regsvr32 softpub.dll
    regsvr32 wintrust.dll
    regsvr32 initpki.dll
    regsvr32 dssenh.dll
    regsvr32 rsaenh.dll
    regsvr32 gpkcsp.dll
    regsvr32 sccbase.dll
    regsvr32 slbcsp.dll
    regsvr32 mssip32.dll
    regsvr32 cryptdlg.dll
    output

    Note If you are prompted, click OK .

    Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

    1. Restart the computer.

    Method 4: Remove the hidden %windir%\System32 and its subfolders attribute

    1. Click Start, click run, type cmd in the Open box, and then OK.

    Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

  • At the command prompt, type the following commands, pressing ENTER after each line:
  • attrib s h % windir %
    attrib s h %windir%\system32
    attrib s h %windir%\system32\catroot2
    output

    Method 5: Define a signature unmanned silent success strategy

    1. Click Start, click run, type regedit, and then click OK.

      Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.

    2. Locate and then click the following key in the registry:

    The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing

    1. Right-click on the Policy binary value, and then click change.
    2. The value data will appear in the following format:
    0000 02

    Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).

    1. Click OK, and then quit the registry editor.

    Method 6: Clear the temporary file and restart the hotfix installation or the service pack installation
     
    To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

    1. Remove all tmp*.cat of the following folders:

      systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

      systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

    2. Delete all the kb*.cat files in the following folders:

    % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
    % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

    1. Remove all the oem *. * files in the % systemroot %\inf folder.
    2. At the command prompt, type the following commands. Press ENTER after each command.

    net stop cryptsvc
    Ren %systemroot%\System32\Catroot2 oldcatroot2
    net start cryptsvc
    output

    1. Restart the installation of the patch failed or the installation of the service pack.

    Method 7: Empty the software distribution folder

    1. Click Start, click run, type services.msc and click OK.

      Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

    2. In the Services (Local) pane, click automatic updates, and then click stop.
    3. Reduce the Services (local) window.
    4. Select all the contents of the Windows distribution folder, and then delete them.

      Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.

    5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
    6. In the Services (Local) pane, click automatic updates, and then click Start.
    7. Restart the computer, and then run Windows Update again.

    You can also follow the link below:
     
    You cannot install some programs or updates
     
    http://support.Microsoft.com/?kbid=822798
     
    I hope this helps.
     
    Concerning
    Rehman - Microsoft Support

  • Help with error code 80072EFE

    I tried several fixes for Windows Update to work, but I still get the error 80072EFE code. Windows suggested going to a program called "Fixit", but when I click on it, another window pops up saying that windows cannot connect to this site. I'm not an expert, but would classify me as pretty good for solving problems, but this one left me speechless. I have not installed anything back to my computer. The last time that I could do a update 12/15/10. Help!

    ERROR_INTERNET_CONNECTION_ABORTED 0X80072EFE

    - You can encounter errors related to the connection of temporary when you use Windows Update or Microsoft Update to install updates

    What is the result of a security/antivirus installed (SS); It's current subscription; its definitions are up to date; has whatever it is detected the last time that the system has been analyzed for the presence of malware?
    Were there updates/updates recently installed for the installed AV/SS?

    Another aspect that may be at play here is the home network. The networked system via a wireless or wired router connection?

    This specific error may be temporary or, as has been the case in the course of the 4 or 5 months indicated by messages on this forum, it's a sign that malware prevents the system to connect to the update servers.

    The system is having trouble connecting with all the addresses of Microsoft.com?
    Suggest you see if the system can access the malware scanners online, such as these-

    ESET Online Scanner
    Windows Live OneCare for Windows Vista and Windows 7 security scanner
    (requires Internet Explorer 32-bit)
    Emsisoft Web Malware Scan

    MowGreen
    Expert in Windows IT Pro - consumer safety

    * - 343-* FDNY
    NEVER FORGOTTEN

  • Help with error code 80073712 with windows update...

    I have problems with fixing error code: code 80073712 in my windows update program... I tried to do the checksur.exe... and after having told me he found 10 errors... He only corrected a mistake and said its missing files to correct the other 9 errors it finds... I have over 3000 photos on the computer more than a ton of documents that was for my personal use and then my church congregation as well. The music I like to keep it on the hard drive and really don't want to lose to re - install windows to fix backup... would only store my documents and photos... as I tried to record my songs on a DVD that says that he accepts the mp3 files, but it didn't work... so I lost 3 DVDs, it took to keep the music... Are there other ways to solve this problem without having to save and not lose the files... I really need to keep most of them away to printing purposes and everyday... Thanks a lot for all the help that can be given.

    I already tried the methods of fixing this error code 2... None of them helped or solved the problem... y at - it something else I can do...

    I was not able to install updates since November 13, 2009... updates how am I missing that will affect the security of my operating system and is updated just a better option...

    I was not able to install updates since November 13, 2009... updates how am I missing that will affect the security of my operating system and is updated just a better option...

    You are missing a lot of critical security updates (especially if the updates published on 10 Nov 09 never installed).

    You don't want to switch to Win7 with the computer in its current state (nor would you be able to do, I think).

    Vista SP1 or SP2 installed?

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    See...

    .. .you you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712":
    http://support.Microsoft.com/kb/931712

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Help with error on blue screen under Vista 32 bit

    Had this message pop up several times. Any ideas?
    Thank you!
    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.0.6000.2.0.0.768.3
    Locale ID: 1033
    More information about the problem:
    BCCode: fe
    BCP1: 00000008
    BCP2: 00000006
    BCP3: 00000001
    BCP4: 867B 9000
    OS version: 6_0_6000
    Service Pack: 0_0
    Product: 768_1
    Files helping to describe the problem:
    C:\Windows\Minidump\Mini122811-01.dmp
    C:\Users\xxx\AppData\Local\Temp\WER-37955-0.SysData.XML
    C:\Users\xxx\AppData\Local\Temp\WERB24D.tmp.version.txt
    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Hello

    Do not forget to check with the manufacturer of system support (or motherboard for custom systems manufacturer)
    and their forums (if any) for known issues.

    Check these KB Articles that "pourraient" apply.

    Stop 0xFE peripheral sleep or Hibernate with USB streaming output
    http://support.Microsoft.com/kb/974303

    "Stop 0x9F" error or "Stop 0xFE" on a Windows 7 or Windows Vista-based computer that
    use some USB AMD EHCI host controllers
    http://support.Microsoft.com/kb/982091

    ==================================================================

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    =============================

    Although the control of bug 0xFE: BUGCODE_USB_DRIVER indicates generally material it could easily
    be a connected USB device and not a system USB device. And you can never really exclude drivers.

    BCCode: FE 0x000000FE<-- read="" this="">
    http://www.faultwire.com/solutions-fatal_error/BUGCODE-USB-driver-0x000000FE-* 1251.html? = date order

    --------------------------------------------------------------------------------------

    A possible cause can be updated to Windows, including pilots. Even the drivers are generally not considered as the
    USB-related, such as video/display, network (NIC & WiFI) and others, may be the cause.

    Especially Norton, Kaspersky, McAfee, SpyBot, Adaware and others may cause or have a role
    in this issue. Try to uninstall it to see if that helps. Use the removal of their creator tools and/or
    Special instructions. (Antivirus/antispyware/security programs)

    ----------------------

    Remove all THE USB devices on the computer. Don't forget to search the drivers updated for all USB
    devices.

    References to Vista also apply to Windows 7.

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
    Devices disabled - look around (with the exception of USB controllers) for all hidden devices / people with disabilities
    (can have zero or more than one) and top - right click UNINSTALL.

    Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
    UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

    This KB shows XP how to and methods of Vista and Windows 7 are the same
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer.
    as well as all USB devices that you previously used. Run Options and tick three 1
    are there choices to see if any.

    http://www.NirSoft.NET/utils/usb_devices_view.html

    You must remove all instances of the devices and restart.

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    =======================================

    After the above, attach a USB device at a time to see if any cause the issue.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Help with error code: 80070490

    I had problems with my computer for quite awhile... I noticed my computer slows down to a snails pace recently and decided to check the updates. Apparently, updates important are not to proceed with the installation or something... I am sure, that's the problem with my laptop... but again once I'm not very good with computers so any help is appreciated... Thank you

    http://support.Microsoft.com/kb/958044

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    Tips from Microsoft is to do a Vista repair install:

    Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

    Note Run a repair installation will not damage files and applications that are currently installed on your computer.

    To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

    1. Close all applications and restart the computer.
    2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
    3. In the settings window, click install now.

      Note If Windows does not automatically detect the DVD, follow these steps:

      1. Click Start

        Collapse this includes this image

        , and then type Drive : \setup.exe in the box to start the search .

        Note The Drive placeholder is the drive letter of the computer's DVD.

      2. In the list of programs , click Setup.exe.
      3. In the settings window, click install now.
    4. Click connect to get the latest updates for installation (recommended).
    5. Type the CD key if you are prompted to do so.
    6. Click Yes to accept the Microsoft software license agreement.
    7. On the which type of installation do you want? of the screen, click upgrade.
    8. When the installation is complete, restart your computer and try again to install updates.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    It is a good tutorial to read about a repair installation:

    If you do not have a DVD of Microsoft Vista, borrow one from a friend.

    Read this tutorial on how to do a repair installation:

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    See you soon.

    Mick Murphy - Microsoft partner

  • Help with error of unidentified network and Teredo Tunneling

    Well guys, this one's a doosey! My computer has recently lost my internet connection and it gives me the network not identified when I try to connect to my WiFi.  I looked into it and found a couple of things different.  One of them being that the Teredo Tunneling driver in my network drivers does not (code 10).  I tried to do a few things to correct what I found on other resources, but they did not work.  At this point I don't know what to do, so I could use some help!

    Here's my ipconfig/all, if this can help!

    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

    C:\Users\Owner>ipconfig/all

    Windows IP configuration

    Name of the host...: Allens-PC
    Primary Dns suffix...:
    Node... type: broadcast
    Active... IP routing: No.
    Active... proxy WINS: No.

    Wireless Network Connection 3 Wireless LAN adapter:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Virtual WiFi Miniport adapt #2
    Physical address.... : 9C-4E-36-3C-86-29
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Wireless Network Connection 2 wireless LAN adapter:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Microsoft Virtual WiFi Miniport adapt
    Physical address.... : 9C-4E-36-3C-86-29
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :
    ... Description: Intel Centrino Wireless-N 2200
    Physical address.... : 9C-4E-36-3C-86-28
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    Address IPv6 local link...: fe80::e999:dc2e:1673:3164% 13 (Preferred)
    IPv4 address: 192.168.0.100 (Preferred)
    ... Subnet mask: 255.255.255.0.
    Lease obtained...: Monday, October 13, 2014 21:27:44
    End of the lease...: Tuesday, October 14, 2014 01:01:19
    ... Default gateway. : 192.168.0.1.
    DHCPv6 IOOKING...: 362565174
    DHCPv6 DUID customer...: 00-01-00-01-19-25-C7-9A-DC-0E-A1-FC-AC-FD

    DNS servers...: 192.168.0.1.
    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected
    The connection-specific DNS suffix. :
    ... Description: Controller Atheros AR8161/8165 PCI - E Gigabit Ethernet (NDIS 6.20)
    Physical address.... : DC-0E-A1-FC-AC-FD
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes

    C:\Users\Owner >

    Hello Allen,.

    Thanks for posting your query in Microsoft Community.

    I understand that you have trouble connecting to the internet. We will certainly help you with the same.

    I would like to know some more information on this issue to help you better.

    Remember to make changes before this problem?

    In the meantime, please follow the following suggestions to solve the problem.

    For questions related to the unidentified, network please follow the suggestions of Nithyananda J and see if that helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-connection-shows-that-it-is-connected-but/52e60042-2666-4EAF-80be-193b26db10be

    Also, try to Reset Winsock and see if that helps.

    1. Click Start, all the Programs\Accessories and click right on command prompt.
    2. Select ""Run as Administrator " to open a command prompt."
    3. In the windows command prompt , type the following commands:
    Restore the default install WINSOCK entries: netsh winsock reset catalog
    Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log
    Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log
    Reboot the computer. This should help.

    For problems related to network card drivers, where you get an error code 10 in device properties. You can try to follow the steps mentioned in the link below:

    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

    https://support.Microsoft.com/kb/943104?WA=wsignin1.0

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Registry backup
    http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

    I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

  • Help with error blue screen. BCCode: 116

    Hi, I get the following error message:

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 1053

    More information about the problem:
    BCCode: 116
    BCP1: FFFFFA8010AFC4E0
    BCP2: FFFFF8800FC9E7A0
    BCP3: FFFFFFFFC000009A
    BCP4: 0000000000000004
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1

    You can see here .dmp file:

    https://onedrive.live.com/redir?RESID=ED0BFFB73C652EF7! 126 & authkey =! AFdh-tv9C-zKTsA & ithint = the file % 2cdmp

    Hello

    Error checking 116, {fffffa8010afc4e0, fffff8800fc9e7a0, ffffffffc000009a, 4}

    Probably caused by: nvlddmkm.sys (nvlddmkm + 9a57a0)

    nvlddmkm.sys as of 07/02/2014 Nvidia video drivers.

    fffff880 '0f2f9000 fffff880' 0ff87000 nvlddmkm T (no symbol)
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp: Wed Jul 02 10:42:02 2014 (53B4446A)

    1. check with Nvidia Support, their drivers and documentation online and ask in their forums

    on known problems. Update the video driver. If there is no newer, you will need to come back
    for a more stable version.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    2. check with ASUStek support, their drivers and documentation online and ask in their forums

    on known problems. Updated BIOS, drivers of low level chipset and on-board major and
    separate device drivers.

    BiosVersion = 0205
    BiosReleaseDate = 01/08/2011
    SystemManufacturer = ASUSTeK Computer Inc..
    SystemProductName = CG8565
    Family = Desktop
    BaseBoardManufacturer = ASUSTeK Computer Inc..
    BaseBoardProduct = CG8565
    BaseBoardVersion = Rev 1. XX

    ASUS - Service<-- includes="" live="">
    http://www.service.ASUS.com/

    ASUStek support
    http://support.ASUS.com/

    ASUStek Forums
    http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

    ASUStek drivers
    http://support.ASUS.com/download/download.aspx?SLanguage=en-us

    3 use ALL other methods in the troubleshooters below and in the next message.

    =============================================================

    Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot BlueScreens - answers top 3 (+ 1 more).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    ------------------------------------------------------------

    References to Vista also apply to Windows 7.

    Have you updated your screen/video or other large recent drivers - check in Control Panel.
    Updates of Windows to see if a driver has been loaded it. Use this generic utility below
    and when you get to the section driver use the methods in the next message and then back to
    the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
    cause this error.

    Also check with the support of system Maker and video/display of the map because he could be called
    questions - also check in their forums.

    BCCode: 116 0 x 00000116

    Bug Check 0 x 116: VIDEO_TDR_ERROR

    Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.

    Important info if you received a STOP Code

    If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    These actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    VIDEO_TDR_ERROR settings

    The following settings are displayed on the blue screen.

    Parameter Description

    1

    The pointer to the context internal TDR recovery, if they are available.

    2

    A pointer to the loaded device driver module (for example, the owner tag).

    3

    The error code of the last operation that failed, if they are available.

    4

    Reserved.

    BCCode: 116 0 x 00000116<-- read="" this="">
    * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

    --------------------------------------------------------------------------------

    The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
    special meaning (other than pilot caused bluescreens occur with some frequency).

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
    to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    How to stop Windows 7 automatically install drivers
    http://support.Microsoft.com/kb/2500967

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Help with error 80070103

    I tried d/l this update and it is constantly as having failed.  Is it a vital update?

    Advanced Micro Devices, Inc. - WDDM1.2 graphics card - AMD Radeon HD 7520 G

    Download size: 42.6 MB

    You may have to restart your computer for this update is taken into account.

    Update type: Optional

    Any help on this is greatly appreciated.

    Thank you.

    Paul

    Hello Paul,

    Welcome to the Microsoft community.

    If you receive error Windows Update 80070103 while installing updates, you are trying to install a driver is already installed on your computer or a driver that might be less compatible that you have already installed. To find more information please refer to the procedure described in the following article:

    Error 0 x 80070103 is displayed when you use Microsoft Update or Windows Update Web sites to install updates

    Hope that the information provided is useful. If the problem persists, get back to us with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • need help with error message

    When I try to open internet explore or other applications on my computer crashes upward. It comes to getting the error message:

    the exception unknown software exception (0xe0434352 occurred in the application at location 0x00007FFDC385A1C8

    Please help thanks.

    Hello

    We are here to help.

    To resolve the problem you are experiencing, follow these troubleshooting steps:

    Perform a clean boot to verify if a third party application is causing the problem. For more information about how to perform clean boot, check it link.

    If the error code persists, it is possible that there is a problem with the application itself. In this case, download and run the Microsoft .NET Framework repair tool. For the repair tool, click onhere.

    Let us know how it goes.

    Kind regards.

  • Help with error code irql_not_less_or_equal

    Windows 8 error irql_not_less_or_equal

    Do not know how to read the minidump but I compressed it and here is a link

    https://onedrive.live.com/redir?RESID=B78DD8520B559AB7! 204 & authkey =! AFcAakJybuCgUOM&ithint=folder%2c.zip

    Thanks for any help!

    Hello

    This seems to be a fairly new computer still in warranty. If so be sure to contact ASUStek
    Supported. As ASUS OEM is responsible for the proper functioning of these two material and
    Windows. Whatever the cause, it will be them to solve.

    The 0 has CAUSE ntkrpamp.exe Bug_Check which is a component of Windows, which means
    Another thing he has led astray. No other real help in the minidump.

    Bugcheck A, {0, 2, 0, 816e0522}

    Probably caused by: ntkrpamp.exe (nt! KiTimerWaitTest + 2ba)

    1. check with ASUStek support, their drivers and documentation online and ask in their forums
    on known problems. Update the BIOS, chipset low level drivers and ask in their forums
    on known problems.

    BiosVersion = T100TA.227
    BiosReleaseDate = 27/02/2014
    SystemManufacturer = ASUSTeK COMPUTER INC..
    SystemProductName = T100TA
    Family = T
    SystemVersion = 1.0
    SystemSKU = ASUS-TabletSKU
    BaseBoardManufacturer = ASUSTeK COMPUTER INC..
    BaseBoardProduct = T100TA
    BaseBoardVersion = 1.0


    2
    carefully check for malware.

    3 check memory very carefully (see memory test methods below).

    4 use the other methods below to solve the problems.

    5 after using ALL methods if necessary run Driver Verifier to see if it can indicate a
    CAUSE (see methods of auditor of drivers below).

    ========================================================

    Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
    According to needs). Win + D key calls the office and using Win Key active / disable the Office
    and the splash screen.

    Translate these methods Windows 8/8.1 (there is little real difference):

    Resolution of the blue screen in Windows 8/8.1 errors
    http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
    Start Windows. (applies to Windows 8/8.1)
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also, Windows 7 and Windows 8/8.1)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    BCCode: 0a 0x0000000A

    Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
    just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
    The video driver or something affecting it would be questionable.

    Make sure that the drivers, BIOS and chipset of low-level drivers are all updated by checking manually
    system manufacturer and device manufacturers sites.

    -----------------------------------

    BCCode: 0a 0x0000000A

    Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

    Control bug IRQL_NOT_LESS_OR_EQUAL 0x0000000A value a. This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

    Important info if you received a STOP Code

    If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    These actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    IRQL_NOT_LESS_OR_EQUAL parameters

    The following settings are displayed on the blue screen.

    Parameter Description

    1

    Memory referenced

    2

    IRQL at time of reference

    3

    0: read

    1: write

    4

    Memory address

    Cause

    This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

    The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

    If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

    Resolution

    If a kernel debugger is available, get a stack trace.

    To resolve an error caused by the faulty device driver or service system, BIOS

    1. Restart your computer.

    2. Press F8 to character-based menu that displays the choice of operating system.

    3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

    To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

    1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.

    2. Try disabling the cache in memory of the BIOS.

    3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.

    4. Make sure that the latest Service Pack is installed.

    5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.

    6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

    If the message appears during installation of Windows, make sure that the computer and installed devices are compatible with the version of Windows being installed. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

    Here is an example of debugging: (see this link)
    http://msdn.Microsoft.com/en-us/library/ff560129 (v = vs. 85) .aspx

    BCCode: 0a 0x0000000A<-- read="" this="">
    * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

    ============================================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    =========================================================

    Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
    http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

    How to check a drive for errors with "chkdsk" in Windows 8
    http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

    Redesign of chkdsk and the new model of health NTFS
    http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

    -----------------------------------------------------------------------------------------------------

    Translate these methods Windows 8/8.1 (there is little real difference):

    References to Vista also apply to Windows 7 and Windows 8/8.1.

    It's my generic how updates of appropriate driver: (also update the BIOS and the low level)
    drivers for chipset - see the website of the motherboard manufacturer of the system
    )

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Windows 8/8.1 - hardware and drivers
    http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

    Windows 8/8.1 - Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

    Windows 8/8.1 - what happens if a device is not installed correctly
    http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

    ==========================================

    Tests of memory intercept all errors such as memory do not match (possible even for sticks
    seemingly identical) and when the faster memory is placed in system behind the slower memory.
    So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
    show a problem.

    To test the RAM here control - run 4 + hours or so.<-- best="">
    www.memtest.org

    For the Windows Memory Diagnostic tool.

    WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
    list - and follow the prompts.

    Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
    Diagnostic tool
    http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

    How do I run the memory diagnostic Windows 7 (and 8/8.1) - in Windows 8/8.1
    the name is "Windows Memory Diagnostic".
    http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

    ==========================================================

    After doing ALL the updates you can and if the problem persists, run DriverVerifier.
    (Remember to use the methods Windows 8 posted at the top of the first answer above).

    Driver Verifier can help find some BSOD problems:

    Using Driver Verifier to identify issues with Windows drivers for users advanced
    http://support.Microsoft.com/kb/244617

    How to solve problems of drivers in Windows Vista or 7 (or 8/8.1)
    http://www.WinVistaClub.com/T79.html

    Using Driver Verifier
    http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    Driver Verifier
    http://www.techsupportforum.com/2110308-POST3.html

    Using Driver Verifier
    http://www.faultwire.com/solutions/using_driver_verifier.php

    How to use Windows drivers check Manager to solve problems and identify the Driver questions
    http://www.YouTube.com/watch?v=_VwIDD9xngM

    You can disable the driver verifier
    http://support.Microsoft.com/kb/244617

    WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

    BlueScreenView lets you know if there is a driver specified in the error message. Also check with
    MyEventViewer at the blue screen.

    If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Help with error - 934 group function is not allowed here

    Hey there will, I'm having problems with a request and just does not know how to do it without error.

    I'm trying to get all the employee emerging infectious diseases that have less than 2 number max of DID (dependants) in the table.

    It's my current query

    SELECT Employee.LName. ' ' || Employee.Fname as Full_Name, Employee.EID

    The left outer JOIN employee depends on Employee.EID = Dependent.EID

    Having Count (DID)--2 > ((select Max (N) as From (SELECT Employee.EID, Count (DID) As N FROM Employee Inner Join Dependent On Employee.EID = Dependent.EID group by Employee.EID, Count (DID))) N)

    Order of Employee.Lname, Employee.Fname

    Which gives me an error on column 4, no matter what I do. If I remove the Count (DID) in the group by clause (which I tried it earlier), it gives me a is not an error of the function of single group...

    The most frustrating thing is that

    Select Max (N) as From (SELECT Employee.EID, Count (DID) As N FROM Employee Inner Join Dependent On Employee.EID = Dependent.EID group by Employee.EID) N

    Works perfectly, but because it's a mission, I have to do in one step (no substeps/views)

    Any help?

    Thank you very much

    Hello

    ac981e5d-D10A-4520-BF42-23a894d04fb7 wrote:

    Ok. I'm taking your code in a view... I get this.

    and there is an orange underscore and a text of the error that says

    Select incoherent list in group by... change the group by clause of e.fname, e.lname, e.eid, count, max

    Which isn't what either the Oracle database would do.  Everything about orange (or any other color) sounds like it is caused by a front-end that could be interacting with Oracle.  In addition, the Oracle error messages always come with a 3-letter-5 code, as ORA-00933.

    under the selection internal (first medium)

    You have deleted the WITH clause.  The parser can recognize the error when it has reached the first left parenthesis.

    Create view AS A10T2

    (

    SELECT e.lname. ' ' || e.fname AS full_name

    e.eid

    (D.) AS this_group_count

    MAX (COUNT (d.)) ON (AS highest_group_count)

    E employee

    LEFT OUTER JOIN dependent d ON e.eid = d.eid

    GROUP BY e.lname, e.fname, e.eid

    )

    SELECT full_name

    eid

    Of aggregate_results

    WHERE this_group_count > = highest_group_count - 2

    ORDER BY full_name

    You need the WITH to define this clause means "AGGREGATE_RESULTS":

    Create view AS A10T2

    WITH aggregate_results AS

    (

    SELECT e.lname. ' ' || e.fname AS full_name

    ...

    Why do you have an ORDER BY clause in a view?   (It is probably not cause of your errors, just make the inefficient view)

    Command line error: column 5: 23

    Error report-

    SQL error: ORA-00933: SQL not correctly completed command

    00933 00000 - "not correctly completed SQL command.

    * Cause:

    * Action:

    This is another indication that some front is getting involved.  Looks like your front-end reports the exact Oracle error message, "0RA-00933" and then builing it's own error code, "00933. 00000 ", on this basis.  ORA-00933 is a reasonable mistake to wait if you omit the line ' WITH the aggregated results AS.  Once again, until I can actually run your code, I can't test it, and I can't run your code until you post CREATE TABLE and INSERT statements for some examples of data, or change the problem to use commonly available tables, such as those in the scott schema.

    and when I try my code

    CREATE VIEW A10T2 AS

    SELECT Employee.LName. ' ' || Employee.Fname as Full_Name, Employee.EID

    The left outer JOIN employee depends on Employee.EID = Dependent.EID

    Seen (Count (DID)) + 2 > (select Max (N) From (SELECT Employee.EID, Count (DID) As "N" FROM Employee Inner Join Dependent On Employee.EID = Dependent.EID group by Employee.EID))

    Order of Employee.Lname, Employee.Fname

    I get

    Command line error: column 2: 8

    Error report-

    SQL error: ORA-00937: not a function of simple-group

    00937 00000 - 'not a single-group function.

    * Cause:

    * Action:

    Then the orange underscore even under my inner ("select employee. EID, Count (DID) as "N" ") says to change the Group of Employee.eid, Count (DID)

    I just don't understand why he tells me to group them by Count (DID)?

    Isn't that what you did in your original post, and I have explained in answer #2?  If you continue to repeat the same mistake, you can expect continue to get the same error.  Given that you have a code, you know causes an error, do you think really that what makes a vision will cause the error to disappear?

    The inner query works fine on its own...

    Right; It's the outer query where you are missing the GROUP BY clause.

Maybe you are looking for

  • stop used my Mac Pro?

    Whenever I have it hit "SHUTDOWN" my computer stops but RESTARTS immediately. I have not any open programs, and I have no timed auto-off or start enabled.

  • How to export channels tiara to excel with a certain configuration file

    Hello I would like to export some channels from the portal of the DIAdem of data to an existing excel file. The excel file is made up of multiple worksheets, and each channel must match to a worksheet. I ve tried to use EXCELExport() function but it

  • Regarding Windows 8 - OEM key built into the BIOS.

    I have a pre installed Windows 8 HP Notebook (under warranty). I get a new HP's HARD drive replacement. My question is that if I install a Windows 8 Pro OS with a new activation code on Microsoft Store, then the original Windows 8 - OEM key integrate

  • Windows 7 says "not genuine".

    I recently reinstalled Win7Home on an Asus UX31A from the factory CD. Today Windows says "Windows 7 Build 7602 this copy of Windows is genuine.  I tried to launch the MS tool to solve the problem and it does not give me the opportunity to resolve. Th

  • Screen resized 10 connecting blackBerry

    Since I've updated my Z30 to the latest version of the software, when I login the screen size has been expanded.  I have to use the tightening of the finger/thumb to reduce the size of the screen to normal size to see all my icon, etc. I tried to res