Help with error of unidentified network and Teredo Tunneling

Similar Questions

• Problem with the HP 430 (bluetooth and teredo tunneling Pseudo-Interface) drivers

  Hello

  recently my bluetooth function cannot to connect to other devices... This is what happens to the Device Manager:

  

  What is teredo tunneling pseudo-interface is for? is it important?
  If so, how to solve this problem?
  How to solve the problem of the bluetooth?

  Generic Bluetooth adapter:
  USB\VID_03F0 & PID_311D & REV_0001
  USB\VID_03F0 & PID_311D

  Teredo tunneling pseudo-Interface:

  * TEREDO

  Go to Device Manager, right click on the device and select Update driver. Path to the .inf file that you downloaded for use.

• Microsoft ISATAP ISATAP #2 and Teredo Tunneling adapters have driver problems, and they could not be resettled. Help, please!

  Microsoft ISATAP ISATAP #2 and Teredo Tunneling adapters have driver problems.  I tried to correct by using Troubeshooter and the Device Manager, but not luck.   The computer was upgraded to Windows 7 Ultimate this year. Help, please!

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

  http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-General/27512-terredo-tunneling-etc.html

• Help with error message: "Windows Vista Home Premium product key you typed in is invalid for activation.

  Original title: help with error message... Please...!

  I use a desktop PC of HP Pavilion a6202.uk with Windows Vista Home Premium & Microsoft Office 2003.  When I am back from vacation & turned on my PC, my password was OK, but rather to raise Windows, I received the following message: "Windows Vista Home Premium product key you typed in is invalid for activation.  He then listed the following options: "access your computer with reduced functionality (this will allow you to buy a product online key)" or "Type a different product key" or "contact HP to help solve this problem."

  I have no idea what a product key is and don't have anything either in the type comes to connect as usual.  I can't access anything to be same to reduced functionality.  I can not type in a new product key because I did not.  I can not contact HP - phone number does not... !!

  I'm quite desperate, I travel docs to print and e-mail to answer and I don't have any idea what is happening.  Please can someone help with this not very IT clued-up DTP...!

  Moved from Vista programs Forum.

  You should have a sticker with the product key on your computer, on the bottom, or under the battery cover.  I try to type this key in and see if it accepts it.  If this isn't the case, you might not have an authentic version of Windows installed.

• Home LAN in the network as 'Unidentified network' and position the 'Public' profile in black - cannot be changed.

  I have two systems running W/7 Home Premium - in both LAN I setup for my home network is presented as 'Unidentified network' and is set to the 'Public Profile ' represented in black, which can not be changed. I cam change the name of the local network that is displayed correctly, but nothing else. I tried to use just the TCP/IP 4 and setting static IP addresses, who worked on these systems using Vista, without success. I tried to use TCP/IP 4 and 6 without setting static IP addresses - again without success. Looking at the forum for discussions on what I have not been able to find a solution to the problem. There are two systems.

  MJMathews

  I fixed it after many hours. Here is my situation and my workaround. It will be useful.

  At home, I have 2 internet broadband connections. One is ADSL (20 Mbps) behind a router with DHCP and the second is cable (120 Mbps) directly behind the modem (public IP to the computer). Both lines go to my Mediacenter PC that is always on and running the Kerio control (https://www.kerio.nl/products/control/). Kerio is a router function software that supports the binding switch. As you can see, having a working internet connection is essential for me. A third network interface card is configured with a static IP (192.168.3.1), Kerio is running a DHCP server on it and is connected to my home network.

  I did two things, but I think the real trick is the second. Anyway, the first step was that I ran the Powershell script mentioned in the http://blogs.msdn.com/b/dimeby8/archive/2009/06/10/change-unidentified-network-from-public-to-work-in-windows-7.aspx . Works on all networks unidentified to the networks work. Well, not either but the Group residential don't start on work networks!

  Windows 7 detects your home network by looking at its front door. Because I was running router/gateway on the same PC, I don't fill out the IP Address of the gateway. So, he won't give the popup to identify the network and you won't be able to put it manually at home. Also, I forgot to do it in the script.

  Setting of the gateway to the static IP address also did not work because Windows deletes the address of the gateway (192.168.3.1) after pressing OK. My Tip: Add a second IP address for the network card. For example 192.168.3.254. Then leave the main IP (in my case 192.168.3.1) and set the IP of the gateway to the second IP (192.168.3.254). A few seconds later, Windows will address the context menu and select "Home network" and you're done!

• Help with installation of Windows Mail and gmail! error message with Port: 143 and Code: 800ccc0e

  I need adjustment help my email on gmail to my windows live account.  Currently I have a local account of cable for my email and need to change to an e-mail account that will be permanent.   I can't seem to get Windows Mail (Vista) to accept my gmail or hotmail account.  I've finally set up the gmail and it gives me an error when searching for files.

  The error is:
  Account: imap.gmail.com
  Server: IMAP.gmail.com
  Username: (username)
  Protocol: IMAP
  Port: 143
  Secure (SSL): 0
  Code: 800ccc0e

  Hello

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1:

  Step 1: Change the setting above

  Server: imap.gamil.com

  User name: user name

  TO

  Server: imap.gmail.com

  Username: * address email is removed from the privacy *

  Step 2:

  a. check that IMAP is enabled

  b. http://mail.google.com/support/bin/answer.py?hl=en&answer=77695

  c. check that your settings are correct:

  i. IMAP server is imap.gmail.com. If no joy, try Photoscape

  II. connection is your full email address, no username only.

  d. check if antivirus interferes. Disable check incoming mail antivirus.

  e. check if your ISP is blocking Gmail

  f. troubleshooting of IMAP

  http://mail.Google.com/support/bin/answer.py?hl=en&answer=78774

  Method 2: You can temporarily disable security software and check if the problem still persists.

  Disable the anti-virus software

   http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Make sure that you activate the software antivirus and other security programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if that helps.

• Please help: registry error 80246008 BITS missing and service for win vista 32-bit

  Hello, I am running Windows Vista Home Premium 32-bit with SP2 and recently met a problem trying to get windows updates. I spent days reading post and the windows support and community application solves nothing doesn't. I receive the error 80246008 so they were trying to get updates. I followed of many positions and patches with a limited degree of success recommended. I have windows update to activate and my COM + service is on and working but my smart information transfer Service does not appear in my register and the list of services. I saw the patches for other versions of windows, but not for Vista, maybe I'm just blind? Any help would be greatly appreciated even if your just pointing me in the right direction. On another note, I can't get MSE update of virus definitions, related question, I guess? Don't know if this helps, but if there is any other information I can provide to assist with a solution let me know and ill update this post with it. A hugh thanks to anyone who can help.

  Hi Thagangrel,

  I see that you get the error 80246008 while trying to install updates. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you make changes to the computer before the show?

  3. who update fails with this error?

  Method 1.

  Run the utility of automatic troubleshooting of this article.

  Windows Update, error 80246008: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80246008

  Method 2.

  Follow the steps in this article.

  Windows Update, error 80246008: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80246008

  Method 3.

  Start the computer in safe mode with network and perform a virus scan.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 4.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 5.

  Start the computer in a clean boot state and then try to install the updates. A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Refer.

  Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

  Try these steps and let us know the status.

  Thank you.

• Unknown error in the network and sharing Center

  When I opened my network and sharing Center where the active networks would be just said

  'Unknown '.

  and

  "The account specified for this service is different from the account specified for other services running in the same process"

  If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.

  Network list service does not work and does not give the error:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process

  I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.

  A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.

  I also tried

  netsh winsock reset

  from an administrator command prompt but no change.

  Can anyone help?

  Hi Andrea,

  Please keep us updated.

  This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Help with error blue screen. BCCode: 116

  Hi, I get the following error message:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1053

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8010AFC4E0
  BCP2: FFFFF8800FC9E7A0
  BCP3: FFFFFFFFC000009A
  BCP4: 0000000000000004
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  You can see here .dmp file:

  https://onedrive.live.com/redir?RESID=ED0BFFB73C652EF7! 126 & authkey =! AFdh-tv9C-zKTsA & ithint = the file % 2cdmp

  Hello

  Error checking 116, {fffffa8010afc4e0, fffff8800fc9e7a0, ffffffffc000009a, 4}

  Probably caused by: nvlddmkm.sys (nvlddmkm + 9a57a0)

  nvlddmkm.sys as of 07/02/2014 Nvidia video drivers.

  fffff880 '0f2f9000 fffff880' 0ff87000 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Wed Jul 02 10:42:02 2014 (53B4446A)

  1. check with Nvidia Support, their drivers and documentation online and ask in their forums

  on known problems. Update the video driver. If there is no newer, you will need to come back
  for a more stable version.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  2. check with ASUStek support, their drivers and documentation online and ask in their forums

  on known problems. Updated BIOS, drivers of low level chipset and on-board major and
  separate device drivers.

  BiosVersion = 0205
  BiosReleaseDate = 01/08/2011
  SystemManufacturer = ASUSTeK Computer Inc..
  SystemProductName = CG8565
  Family = Desktop
  BaseBoardManufacturer = ASUSTeK Computer Inc..
  BaseBoardProduct = CG8565
  BaseBoardVersion = Rev 1. XX

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  3 use ALL other methods in the troubleshooters below and in the next message.

  =============================================================

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug Check 0 x 116: VIDEO_TDR_ERROR
  

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt to reset display driver and recover a timeout failed.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  VIDEO_TDR_ERROR settings

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The pointer to the context internal TDR recovery, if they are available.
  2	A pointer to the loaded device driver module (for example, the owner tag).
  3	The error code of the last operation that failed, if they are available.
  4	Reserved.

  BCCode: 116 0 x 00000116<-- read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Help with error code irql_not_less_or_equal

  Windows 8 error irql_not_less_or_equal

  Do not know how to read the minidump but I compressed it and here is a link

  https://onedrive.live.com/redir?RESID=B78DD8520B559AB7! 204 & authkey =! AFcAakJybuCgUOM&ithint=folder%2c.zip

  Thanks for any help!

  Hello

  This seems to be a fairly new computer still in warranty. If so be sure to contact ASUStek
  Supported. As ASUS OEM is responsible for the proper functioning of these two material and
  Windows. Whatever the cause, it will be them to solve.

  The 0 has CAUSE ntkrpamp.exe Bug_Check which is a component of Windows, which means
  Another thing he has led astray. No other real help in the minidump.

  Bugcheck A, {0, 2, 0, 816e0522}

  Probably caused by: ntkrpamp.exe (nt! KiTimerWaitTest + 2ba)

  1. check with ASUStek support, their drivers and documentation online and ask in their forums
  on known problems. Update the BIOS, chipset low level drivers and ask in their forums
  on known problems.

  BiosVersion = T100TA.227
  BiosReleaseDate = 27/02/2014
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = T100TA
  Family = T
  SystemVersion = 1.0
  SystemSKU = ASUS-TabletSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = T100TA
  BaseBoardVersion = 1.0

  
  2 carefully check for malware.

  3 check memory very carefully (see memory test methods below).

  4 use the other methods below to solve the problems.

  5 after using ALL methods if necessary run Driver Verifier to see if it can indicate a
  CAUSE (see methods of auditor of drivers below).

  ========================================================

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the Office
  and the splash screen.

  Translate these methods Windows 8/8.1 (there is little real difference):

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
  
  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
  Start Windows. (applies to Windows 8/8.1)
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also, Windows 7 and Windows 8/8.1)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  BCCode: 0a 0x0000000A

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  Make sure that the drivers, BIOS and chipset of low-level drivers are all updated by checking manually
  system manufacturer and device manufacturers sites.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL

  Control bug IRQL_NOT_LESS_OR_EQUAL 0x0000000A value a. This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  IRQL_NOT_LESS_OR_EQUAL parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	Memory referenced
  2	IRQL at time of reference
  3	0: read 1: write
  4	Memory address

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Resolution

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.

  2. Press F8 to character-based menu that displays the choice of operating system.

  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.

  2. Try disabling the cache in memory of the BIOS.

  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.

  4. Make sure that the latest Service Pack is installed.

  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.

  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are compatible with the version of Windows being installed. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

  Here is an example of debugging: (see this link)
  http://msdn.Microsoft.com/en-us/library/ff560129 (v = vs. 85) .aspx

  BCCode: 0a 0x0000000A<-- read="" this="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ============================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  =========================================================

  Windows 8 - improve performance by optimizing your hard drive - see "to repair a drive:
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  How to check a drive for errors with "chkdsk" in Windows 8
  http://www.eightforums.com/tutorials/6221-chkdsk-check-drive-errors-Windows-8-a.html

  Redesign of chkdsk and the new model of health NTFS
  http://blogs.msdn.com/b/B8/archive/2012/05/09/redesigning-chkdsk-and-the-new-NTFS-health-model.aspx

  -----------------------------------------------------------------------------------------------------

  Translate these methods Windows 8/8.1 (there is little real difference):

  References to Vista also apply to Windows 7 and Windows 8/8.1.

  It's my generic how updates of appropriate driver: (also update the BIOS and the low level)
  drivers for chipset - see the website of the motherboard manufacturer of the system)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How do I run the memory diagnostic Windows 7 (and 8/8.1) - in Windows 8/8.1
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ==========================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve problems of drivers in Windows Vista or 7 (or 8/8.1)
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Color LaserJet M277n MFP: HP Color LaserJet MFP M277n, no problems with scan to folder network and internet connection.

  I just bought a 277n MFP which I am running wireless. I have problems with:

  1 - the printer is connected to the internet (no problem connecting to the network and printing)

  2 - definition of networks for scanning file (this is how this problem started because I tried to update the firmware)

  1.

  Searched the forum and found some good articles. Tried to restart and change the DNS as shown without success. Other means?

  2. follow-up guide how to set up an SMB shared folder, but without success.

  I shared "\\Johans-MacBook-Pro\users\johan\documents" under OSX and did the same thing in the printer web setup. Even tried with the entrance of my user name and password. When I press 'save and test' I don't have that "the test failed. Try again. »
  Any suggestions?

  Best regards

  Johan

  Hi @Johan84,

  You can use DHCP or an IP fixed, but you will need to set the DNS.

  Disable the IPv6 setting on the printer.

  Go to the printer settings.

  Configuration of the network.

  Network services.

  IPv6.

  Turn the power off.

  These steps should help with scanning to email.

  Let me know. Thank you.

• unidentified network and local access only

  We have a wireless connection and our router is realtek. However, our network is unidentifyable! He said that it is a public network and gives local access only. When an ethernet cable is plugged into our computer to the router connect to the local network overrides this and we have local and internet connection.

  What is the problem that causes our network to not be recognized? I tried to diagnose and repair and renew the IP address, and none of these work.

  Its very frustrating...

  Thank you
  Christina

  Hello CJ135,

  Please make sure that your computer is configured toe "obtain an IP address automatically".

  Open (run as administrator) command prompt and enter the following commands...

  -netsh winsock reset

  -nbtstat - rr

  -netsh int ipv4 reset

  Restart you computer *.

  Method 2

  If you would please check that you have installed SP1 you Vista computer and on the XP computer you have installed SP3?  So that you can make networking 2 computers successfully, they must be on the latest Service packs.  Just click Start and right click on computer and go to properties.  This will tell you what Service Pack you are running.  While windows are open.  would you please check the name of working group on both computers.  It is imperative that all the computers on your network are on the same workgroup.  For example, Vista default workgroup is labeled "Task force" and working XP Group is labeled "MSHOME".  So that both computers to interface with success, the workgroup name must be the same.  In addition, please make sure that 'everyone' has full control on the folder and the shared folder.  If you please you would follow with me as best as possible, I'd be very happy.

  Method 3

  If you have a 3rd party software such as Norton or Mcafee security, disable temporarily and attempt to connect.

  Please check if you are able to connect to the internet.  If you please you would follow with me as best as possible, I'd be very happy.

  Thank you

  Aaron Griffin
  Microsoft technical support

   

• Help with error: "display driver stopped responding, but recovered."

  Hello

  First of all, my configuration is a Dell XPS 7100, Windows 7 Home Premium 64-bit, the Videocard Visiontek AMD Radeon HD 6850 w / 9.2.0.0 driver version.

  AMD Phenom II X 6 cpu.

  My problem is that when I try to play a game (more precisely: Minecraft, SimCity, World in Conflict, AOE3) under Windows, the screen freezes for 5 seconds then go black for 1 second then back to the top with an error message saying:

  Display driver stopped responding, but recovered

  Driver AMD display driver stopped responding and has successfully recovered.

  This started only after I upgraded my video card to an AMD HD 5670 to an AMD Radeon HD 6850 Visiontek, which, at the same time, I upgraded my power supply to a 500w unit as AMD recommends. After that that I've updated all my drivers, deleted and reinstalled the driver video and which did not help. I then searched in all the forums about this problem and found that it is more than likely a problem with Windows power management. So, I followed the instructions on the site to change the registry data to help with this. This did not work, the same problem at the same time. I then contacted AMD Support and fairly well, they told me that it is either the power supply or windows power management which was the cause of the crash.

  I am at a loss now, I know not what to do. I have not tried all the third-party programs to try to manage the power. But if someone has used one that works or has any ideas for me to try please let me know.

  Thank you very much!

  I found a solution that helps!

  Please make a backup of the registry before making any changes in it.

  When editing the registry go to:

  • HKEY_LOCAL_MACHINE
  • then the MATERIAL
  • then DEVICEMAP
  • then the VIDEO
  • in the 'VIDEO' file, there is an entry with the title: MaxObjectNumber - REG_DWORD
  • This has a value at the end that looks like 0 x 00000006 (6) or 0 x 00000005 (5)
  • Double-click MaxObjectNumber, and an edit box appears
  • put 0 in the given value, and then click OK.

  This will disable Windows GPU Timeout detection and recovery. That she has stopped crashing on me.  The only problem is that windows does not save it and it resets after that rebooting so it must be changed every time you start the computer.

  If anyone knows how to save the changes to the registry, I would be very grateful for your advice.

• Help with error - 934 group function is not allowed here

  Hey there will, I'm having problems with a request and just does not know how to do it without error.

  I'm trying to get all the employee emerging infectious diseases that have less than 2 number max of DID (dependants) in the table.

  It's my current query

  SELECT Employee.LName. ' ' || Employee.Fname as Full_Name, Employee.EID

  The left outer JOIN employee depends on Employee.EID = Dependent.EID

  Having Count (DID)--2 > ((select Max (N) as From (SELECT Employee.EID, Count (DID) As N FROM Employee Inner Join Dependent On Employee.EID = Dependent.EID group by Employee.EID, Count (DID))) N)

  Order of Employee.Lname, Employee.Fname

  Which gives me an error on column 4, no matter what I do. If I remove the Count (DID) in the group by clause (which I tried it earlier), it gives me a is not an error of the function of single group...

  The most frustrating thing is that

  Select Max (N) as From (SELECT Employee.EID, Count (DID) As N FROM Employee Inner Join Dependent On Employee.EID = Dependent.EID group by Employee.EID) N

  Works perfectly, but because it's a mission, I have to do in one step (no substeps/views)

  Any help?

  Thank you very much

  Hello

  ac981e5d-D10A-4520-BF42-23a894d04fb7 wrote:

  Ok. I'm taking your code in a view... I get this.

  and there is an orange underscore and a text of the error that says

  Select incoherent list in group by... change the group by clause of e.fname, e.lname, e.eid, count, max

  Which isn't what either the Oracle database would do.  Everything about orange (or any other color) sounds like it is caused by a front-end that could be interacting with Oracle.  In addition, the Oracle error messages always come with a 3-letter-5 code, as ORA-00933.

  under the selection internal (first medium)

  You have deleted the WITH clause.  The parser can recognize the error when it has reached the first left parenthesis.

  Create view AS A10T2

  (

  SELECT e.lname. ' ' || e.fname AS full_name

  e.eid

  (D.) AS this_group_count

  MAX (COUNT (d.)) ON (AS highest_group_count)

  E employee

  LEFT OUTER JOIN dependent d ON e.eid = d.eid

  GROUP BY e.lname, e.fname, e.eid

  )

  SELECT full_name

  eid

  Of aggregate_results

  WHERE this_group_count > = highest_group_count - 2

  ORDER BY full_name

  You need the WITH to define this clause means "AGGREGATE_RESULTS":

  Create view AS A10T2

  WITH aggregate_results AS

  (

  SELECT e.lname. ' ' || e.fname AS full_name

  ...

  Why do you have an ORDER BY clause in a view?   (It is probably not cause of your errors, just make the inefficient view)

  Command line error: column 5: 23

  Error report-

  SQL error: ORA-00933: SQL not correctly completed command

  00933 00000 - "not correctly completed SQL command.

  * Cause:

  * Action:

  This is another indication that some front is getting involved.  Looks like your front-end reports the exact Oracle error message, "0RA-00933" and then builing it's own error code, "00933. 00000 ", on this basis.  ORA-00933 is a reasonable mistake to wait if you omit the line ' WITH the aggregated results AS.  Once again, until I can actually run your code, I can't test it, and I can't run your code until you post CREATE TABLE and INSERT statements for some examples of data, or change the problem to use commonly available tables, such as those in the scott schema.

  and when I try my code

  CREATE VIEW A10T2 AS

  SELECT Employee.LName. ' ' || Employee.Fname as Full_Name, Employee.EID

  The left outer JOIN employee depends on Employee.EID = Dependent.EID

  Seen (Count (DID)) + 2 > (select Max (N) From (SELECT Employee.EID, Count (DID) As "N" FROM Employee Inner Join Dependent On Employee.EID = Dependent.EID group by Employee.EID))

  Order of Employee.Lname, Employee.Fname

  I get

  Command line error: column 2: 8

  Error report-

  SQL error: ORA-00937: not a function of simple-group

  00937 00000 - 'not a single-group function.

  * Cause:

  * Action:

  Then the orange underscore even under my inner ("select employee. EID, Count (DID) as "N" ") says to change the Group of Employee.eid, Count (DID)

  I just don't understand why he tells me to group them by Count (DID)?

  Isn't that what you did in your original post, and I have explained in answer #2?  If you continue to repeat the same mistake, you can expect continue to get the same error.  Given that you have a code, you know causes an error, do you think really that what makes a vision will cause the error to disappear?

  The inner query works fine on its own...

  Right; It's the outer query where you are missing the GROUP BY clause.

• help with error 16820

  help with 16820 error trying to update acrobat

  Looks like you have the Acrobat.com (AIR) Office application installed.  This application is no longer supported.  I would suggest you uninstall and just use the web interface (http://acrobat.com) go ahead.

  Sorry for the inconvenience.

  -David