HELP WITH LINKSYS WUSB100 attached to the USB EXTENSION CABLE - does not work
Hello team,
I own a LINKSYS WUSB100 usb adapter I used for my wifes desktop... I can connect to my home network to surf the net, but the signal is weak... I decided to buy a 25' EXTNESION USB CABLE, which comes with a MALE AND FEMALE ends... I simply PLUGGED the cable on my DESK and PLUG the other end of the USB cable from the LINKSYS WUSB100 card and waiting for the COMPUTER TO RECOGNIZE the card without any problems... To MY SURPRISE, the computer would not have hired the LINKSYS CARD... He said "the search for new deivce, peripheral found but not hired"(Something like that)... in any case the desktype sees the device, but willl not hired there as a LINKSYS and I cannot search FRO all networks... As soon as I unplug the LINKSYS of the cable and plug it into the USB port of the computer - BAM my network comes up with a weak signal... Can anyone understand this? My cable is too long?
Thanks a lot for all inpiut!
DOn
dax0007 at hotmail
There is a standard length for the cable. It will not work with 20 foot extension... Try the cable up to 3-4 feet short and check.
Tags: Linksys Adapters
Similar Questions
-
I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.
I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.
After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]
A few external links to help you set permissions:
MAC
OS X Yosemite: set permissions for items on your Mac
WIN
Set, view, change, or remove permissions on files and folders
Kind regards
Ashutosh
-
Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?
Hello
You get no matter what error code or error message?
There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.
Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628
If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.
Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/
Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx
Hope the information is useful.
-
When I plug my portable hard drive to the usb port it does not read and display the contents...
Hi deaza,.
Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?
O trying to connect to another USB port to check if it works?
O the hardrive shows in windows of the computer when you connect it?
Method 1:
If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.Alternatively, you can try to plug the USB key into a different USB port and check if it helps.
Method 2:
I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctlyMethod 3:
If this does not help, then follow these steps:(a) remove all your USB devices. Use the safely remove the feature to turn them off.
(b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.
To open Device Manager, go to the link below and follow the steps:
http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager
(c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.
You can also navigate to the link below and follow the steps to install the USB device.
http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
pls... can someone help me to play the Godfather 2 in windows 8? Thanks in advanse.
Hi Hugh,.
Thank you for joining Microsoft Community!
According to the description, it seems that the Godfather 2 game does not work in Windows 8.
We have no information about the game in the Compatibility Center.
I'll have to install the game in the Compatibility Center and check out:
Visit this link to learn more about the compatibility.
What is program compatibility?
http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility
Right click on the Setup file and install the game in compatibility mode. Visit this link for steps to install the game in compatibility mode.
Make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows
Using the windows-related issues feel free to post on Microsoft Community.
-
Hi, I have installed sqldeveloper - 4.0.3.16.84 - x 64 with JDK and tried to run SQLDeveloper.exe its does not work. A flash comes and goes. It worked fine until two days ago. Don't know what happened all of a sudden its not working. Need help.
I use Windows 7 Pro.
I have read other threads and tried to launch SQLDeveloper.exe from the CMD prompt, nothing is shown a flash comes and goes.
Tried to change of SetJavaHome sqldeveloper.conf to the path JDK that it didn't work.
Please guide me.
Thank you
Maybe there is a problem with SQL Developer, being able to write to the network share of desktop directory. Add the following to your sqldeveloper.conf file to force the settings of the user to store locally also:
AddVMOption - Dide.user.dir = some_local_dir_to_own_system4.0.3.16.84
I hope this helps...
-
I bought Adobe first Pro CC for a week. I have to also install Adobe Encore because I do the DVD, but it does not work.
I downloaded again, but a zip and I'm in a panic =)
Help me please it is important!
Moving to the cloud creative download & install
Please see CS6 still not installed with creative cloud
Hope that helps!
-
' I need help. I updated Adobe cc and now my photoshop does not work. Here is the error message:
Problem event name: APPCRASH
Application name: Photoshop.exe
Application version: 16.0.0.88
Application timestamp: 55681d 39
The default module name: StackHash_76b2
The default module version: 0.0.0.0
The default module timestamp: 00000000
Exception code: c0000005
Exception offset: 0000000000000006
The system version: 6.1.7601.2.1.0.768.3
Locale identifier: 3084
Information extra No. 1: 76 b 2
Information extra No. 2: 76b2e5a7b24373bbe6f47563f13e47b1
Information extra No. 3: 51ff
Information extra No. 4: 51ff68a42cf4d2164e10e22e1f794f34
Hi Oscar,.
Please see the thread below:
You can also check: 2015 release of Photoshop CC: FAQ
Kind regards
Sheena
-
Ejection of the Replicator Express - II does not work
The duplicator button eject does not work. I have laptop series TECRA M. downloaded the driver for duplicator of toshiba website support and reinstalled but of no use. I searched in all the forums, but did not find any thread for this problem.
If anyone has any idea on this issue, please help. The button eject everything does and do not see an option in Windows 7 to eject the PC I did with IBM lenovo laptop with a docking station.
Is - this top hat of Toshiba laptop what do you use?
I want to say I put t knowledge how it works on other laptops but why you think it should work in the same way on laptop, you used before?You can remove your Tecra of docking station using gear hand placed on the upper side right?
What happens after doing this?By the way: If you check the specs of this under system requirements port replicator s Win7 are not.
-
Webcam on the Satellite A200-175 does not work - error code 10
Hi all
I bought a Satellite A200-175 yesterday and I am trying to use the webcam, but it does not work. I searched the forum for possible solutions, but so far I have not found anything that solves my situation.
The laptop came with a preinstalled Vista OS, but the software of the webcam was not preinstalled. So I downloaded the latest Toshiba download page doftware and installed.
Subsequently, it still does not work and so I changed drivers for generic Microsoft (based on the advice of the forum).I tried to reinstall drivers (several times), but that did not help. Device Manager keeps giving me the error code 10 (device cannot be started).
I'm a bit of idea, so any help would be appreciated!
Hello Franca
It's very strange because I installed the recovery image on notebooks P200 and U300 (both with the webcam) and I didn't notice any problem. After the first boot the cam will be recognized as new hardware and installed correctly.
Have you installed some Messenger like Yahoo or MSN and try to use it with one of them?
-
USB 3.0 does not work on HP Pavilion 23 g010
USB 3.0 does not work on HP Pavilion 23 g010. Can not find the driver from HP site that works. Can anyone help please because it is a new computer? Windows 8 is installed, but owner downgraded to Windows 7. I tried the drivers that are supposed to work and the said error box "this computer does not meet the minimum requirements for installing this software"... don't know what to do but would appreciate greatly any input...
Hello:
Your model has an AMD chipset and processor. Therefore, the Intel chipset driver will not work.
First, install the AMD chipset driver and restart.
You want to download the 49.7 MB file.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
If that does not install the USB 3.0 drivers (see the file they are included), then download and install both of these drivers and USB 3.0 will work for sure in this way.
If there is any other drivers you need for this model, please let me know.
-
Defining the firwall 'on' manually does not work. __
Defining the firwall 'on' manually does not work
Hello
1. using the firewall of windows vista by default?
2 have you installed third-party firewalls?
3 How long have you been faced with this problem?
4. what happens exactly as you try to turn it on?Please answer these questions.
Step 1: Check if the Windows Firewall service is started and set to automatic.
(a) go to Start, type services.msc in the search box start and press ENTER.
(b) now, double-click Windows Firewall service.
(c) Start the service and set it as Automatic.
(d) search for the question now.Step 2: Check if the problem persists in the clean boot state.
Put your boot system helps determine if third-party applications or startup items are causing the problem.Try the steps under Step 1 in the below section to put your computer in clean boot mode.
http://support.Microsoft.com/kb/929135May you enjoy a look at the below articles.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Firewall-recommended-linksThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Hello! I live in Brazil, I try to buy the creative cloud to the picture and it does not work because I changed the country! I don't know what's wrong, they say to call this 1800 426 570 phone number but no work at the Brazil! Does anyone know another phone number to provide payment information?
Hi Luciano,
Please click on the following link: Contact Customer Care
*Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.
Select the exact options indicated below in the capture to get support of screen options:
Let us know if that helps.
Kind regards
Sandrine Bani
-
I bought lightroom in 2010 and have the serial number and a new computer. When I downloaded the latest version and typed in the serial number, it does not work. I bought at the origin of the creative suite. Any suggestions?
Your serial number works only with the EXACT product and the purchased version
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
-you will need to enter your original serial number during the installation for non-Cloud programs
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
- and also read https://forums.adobe.com/thread/1146459
-
Question 1: The button "Buy now" does not work when you select a plan.
How to reproduce the problem:
1. go in terms of pricing and membership creative cloud | Adobe Creative Cloud
2. choose a plan, then click on 'buy now '.
3. you go to a blank page instead of the next steps in the payment.
Question 2: Can not select "Monthly Plan" for a "unique App."
How to reproduce the problem:
1. go into "https://creative.adobe.com/plans".
2. under "Unique App", select a product and then try to select the "monthly Plan" in the second menu drop-down.
3. for some reason, it isn't get selected and the price is replaced with the ellipsis (...). I expect the monthly price to appear.
Please notify.
Thank you.
Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html
Maybe you are looking for
-
Satellite L500-19 X - code error when you try to burn on DVD
Error code: 380381-26 - 2A 037303 when you try to burn to DVD. Can anyone help?
-
Current availability of housing Ultrabay Europe/Anything 755 M GT Y510P?
I am really considering getting this laptop Y510p I feel it basically fits all my needs. http://www.NetAnttila.com/shop/M20/fi/NetAnttila/-Lenovo-IdeaPad-y510p-15-6-7419815 Its price is good and the components aren't bad at all. However I will modern
-
I have a Dell Photo all-in-one 962 printer that does not print...
I checked all the cables and the only thing that will print is an allignment page. I got 3 error messages. They are... Microsoft Office Live Add-in Sign-in has encountered a problem... Runtime error (not sure what TERM)... Microsoft visual C++ Runt
-
I don't understand what to do next.
-
Got new software update for z10 10.3.2.2474 to 10.3.2.2836.But battery problem, it's always a problem. Phone stops automatically, handles upward, battery level is decreased in heavy quantity. This update was not helpful. They help to Blackberry!